Juniper-DS3-MIB
The DS3 MIB for the Juniper Networks enterprise. This MIB contains
managed objects for DS3/E3 interfaces. Management objects are provided
to supplement those found in the standard DS3-MIB (RFC 2496).
- Source file
Juniper-DS3-MIB- Last revised
- Identity
juniDs3MIB- Base OID
1.3.6.1.4.1.4874.2.2.4
Imported Objects
| DS3-MIB | dsx3FarEndConfigEntry dsx3FarEndCurrentEntry dsx3FarEndIntervalEntry dsx3FarEndTotalEntry |
| IF-MIB | ifIndex InterfaceIndexOrZero |
| Juniper-MIBs | juniMibs |
| Juniper-TC | JuniNextIfIndex |
| PerfHist-TC-MIB | PerfCurrentCount PerfIntervalCount PerfTotalCount |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) |
| SNMPv2-TC | DisplayString RowStatus TruthValue |
Net-SNMP examples using the junose MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'Juniper-DS3-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'Juniper-DS3-MIB::juniDs3MIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-DS3-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-DS3-MIB::juniDs3MIB'
Objects (43)
Showing 43 of 43 objects
Object legend
Table
Row
Column
Scalar
Node
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.4874.2.2.4 |
||
.1.3.6.1.4.1.4874.2.2.4.1 |
||
.1.3.6.1.4.1.4874.2.2.4.1.1 |
||
.1.3.6.1.4.1.4874.2.2.4.1.1.1 |
||
|
metersInteger32
|
.1.3.6.1.4.1.4874.2.2.4.1.1.1.1 |
|
|
Enumeration
|
.1.3.6.1.4.1.4874.2.2.4.1.1.1.10 |
|
|
Integer32
|
.1.3.6.1.4.1.4874.2.2.4.1.1.1.11 |
|
|
Enumeration
|
.1.3.6.1.4.1.4874.2.2.4.1.1.1.12 |
|
|
Enumeration
|
.1.3.6.1.4.1.4874.2.2.4.1.1.1.13 |
|
|
Enumeration
|
.1.3.6.1.4.1.4874.2.2.4.1.1.1.14 |
|
|
juniDsx3MdlEic
r/w
|
OctetString
|
.1.3.6.1.4.1.4874.2.2.4.1.1.1.15 |
|
juniDsx3MdlLic
r/w
|
OctetString
|
.1.3.6.1.4.1.4874.2.2.4.1.1.1.16 |
|
juniDsx3MdlFic
r/w
|
OctetString
|
.1.3.6.1.4.1.4874.2.2.4.1.1.1.17 |
|
juniDsx3MdlUnit
r/w
|
OctetString
|
.1.3.6.1.4.1.4874.2.2.4.1.1.1.18 |
|
juniDsx3MdlPfi
r/w
|
OctetString
|
.1.3.6.1.4.1.4874.2.2.4.1.1.1.19 |
|
juniDsx3LineType
r/w
|
Enumeration
|
.1.3.6.1.4.1.4874.2.2.4.1.1.1.2 |
|
juniDsx3MdlPort
r/w
|
OctetString
|
.1.3.6.1.4.1.4874.2.2.4.1.1.1.20 |
|
OctetString
|
.1.3.6.1.4.1.4874.2.2.4.1.1.1.21 |
|
|
Enumeration
|
.1.3.6.1.4.1.4874.2.2.4.1.1.1.3 |
|
.1.3.6.1.4.1.4874.2.2.4.1.1.1.4 |
||
|
Enumeration
|
.1.3.6.1.4.1.4874.2.2.4.1.1.1.5 |
|
|
Enumeration
|
.1.3.6.1.4.1.4874.2.2.4.1.1.1.6 |
|
|
Integer32
|
.1.3.6.1.4.1.4874.2.2.4.1.1.1.7 |
|
.1.3.6.1.4.1.4874.2.2.4.1.1.1.8 |
||
.1.3.6.1.4.1.4874.2.2.4.1.1.1.9 |
||
.1.3.6.1.4.1.4874.2.2.4.1.2 |
||
.1.3.6.1.4.1.4874.2.2.4.1.3 |
||
.1.3.6.1.4.1.4874.2.2.4.1.3.1 |
||
.1.3.6.1.4.1.4874.2.2.4.1.3.1.1 |
||
.1.3.6.1.4.1.4874.2.2.4.1.4 |
||
.1.3.6.1.4.1.4874.2.2.4.1.4.1 |
||
.1.3.6.1.4.1.4874.2.2.4.1.4.1.1 |
||
.1.3.6.1.4.1.4874.2.2.4.1.5 |
||
.1.3.6.1.4.1.4874.2.2.4.1.5.1 |
||
.1.3.6.1.4.1.4874.2.2.4.1.5.1.1 |
||
.1.3.6.1.4.1.4874.2.2.4.1.6 |
||
.1.3.6.1.4.1.4874.2.2.4.1.6.1 |
||
|
OctetString
|
.1.3.6.1.4.1.4874.2.2.4.1.6.1.1 |
|
|
OctetString
|
.1.3.6.1.4.1.4874.2.2.4.1.6.1.2 |
|
|
Enumeration
|
.1.3.6.1.4.1.4874.2.2.4.1.6.1.3 |
|
.1.3.6.1.4.1.4874.2.2.4.4 |
||
.1.3.6.1.4.1.4874.2.2.4.4.1 |
||
.1.3.6.1.4.1.4874.2.2.4.4.2 |
Dependencies (11) 8 direct · 3 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- PerfHist-TC-MIBrfc
- DS3-MIBrfc
- Juniper-UNI-SMIjunose
- Juniper-MIBsjunose
- Juniper-TCjunose
- Juniper-DS3-MIBjunoseselected
Conformance Groups (7)
|
juniDs3Group
obsolete
|
Obsolete collection of objects providing management of DS3/E3
interfaces in a Juniper product. This group became obsolete when support was added for line type and cell scrambler objects. |
.1.3.6.1.4.1.4874.2.2.4.4.2.1
|
|
juniDs3Group2
obsolete
|
Obsolete collection of objects providing management of DS3/E3
interfaces in a Juniper product. This group became obsolete when support was added for DSU configuration objects. |
.1.3.6.1.4.1.4874.2.2.4.4.2.2
|
|
juniDs3Group3
obsolete
|
juniDsx3LineLength juniDsx3LineType juniDsx3CellScramblerConfig juniDsx3Ds3DsuMode juniDsx3Ds3BandwidthLimit juniDsx3Ds3DsuScrambleMode
Obsolete collection of objects providing management of DS3/E3
interfaces in a Juniper product. This group became obsolete when support was added for dynamic DS3 interface objects. |
.1.3.6.1.4.1.4874.2.2.4.4.2.3
|
|
juniDs3Group4
obsolete
|
juniDsx3LineLength juniDsx3LineType juniDsx3CellScramblerConfig juniDsx3Channelization juniDsx3InterfaceType juniDsx3Application juniDsx3Ds3Channel juniDsx3LowerIfIndex juniDsx3RowStatus juniDsx3Ds3DsuMode juniDsx3Ds3BandwidthLimit juniDsx3Ds3DsuScrambleMode juniDs3NextIfIndex
Obsolete collection of objects providing management of DS3/E3
interfaces in a Juniper product. This group became obsolete when more configuration objects were added. |
.1.3.6.1.4.1.4874.2.2.4.4.2.4
|
|
juniDsx3LineLength juniDsx3LineType juniDsx3CellScramblerConfig juniDsx3Channelization juniDsx3InterfaceType juniDsx3Application juniDsx3Ds3Channel juniDsx3LowerIfIndex juniDsx3RowStatus juniDsx3Ds3DsuMode juniDsx3Ds3BandwidthLimit juniDsx3Ds3DsuScrambleMode juniDsx3MdlCarrier juniDsx3MdlTransmit juniDsx3MdlEic juniDsx3MdlLic juniDsx3MdlFic juniDsx3MdlUnit juniDsx3MdlPfi juniDsx3MdlPort juniDsx3MdlGenerator juniDs3NextIfIndex
A collection of objects providing management of DS3/E3 interfaces in a
Juniper product. |
.1.3.6.1.4.1.4874.2.2.4.4.2.5
|
|
|
juniDs3FarEndGroup
obsolete
|
juniDsx3FarEndCurrentInvalidSeconds juniDsx3FarEndIntervalInvalidSeconds juniDsx3FarEndTotalInvalidSeconds
Obsolete collection of objects providing remote statistics information
applicable to DS3 interfaces in a Juniper product. This group became obsolete when remote port number, generator number and carrier objects were added. |
.1.3.6.1.4.1.4874.2.2.4.4.2.6
|
|
juniDsx3FarEndCurrentInvalidSeconds juniDsx3FarEndIntervalInvalidSeconds juniDsx3FarEndTotalInvalidSeconds juniDsx3FarEndPortNumber juniDsx3FarEndGeneratorNumber juniDsx3FarEndCarrier
A collection of objects providing remote statistics information
applicable to DS3 interfaces in a Juniper product. |
.1.3.6.1.4.1.4874.2.2.4.4.2.7
|
Compliance Statements (6)
OID
.1.3.6.1.4.1.4874.2.2.4.4.1.1Obsolete compliance statement for entities which implement the Juniper
DS3/E3 MIB. This statement became obsolete when support was added for
line type and cell scrambler objects.
DS3/E3 MIB. This statement became obsolete when support was added for
line type and cell scrambler objects.
Required groups
| mandatory | juniDs3Group |
OID
.1.3.6.1.4.1.4874.2.2.4.4.1.2Obsolete compliance statement for entities which implement the Juniper
DS3/E3 MIB. This statement became obsolete when support was added for
DSU objects.
DS3/E3 MIB. This statement became obsolete when support was added for
DSU objects.
Required groups
| mandatory | juniDs3Group2 |
OID
.1.3.6.1.4.1.4874.2.2.4.4.1.3Obsolete compliance statement for entities which implement the Juniper
DS3/E3 MIB. This statement became obsolete when support was added for
dynamic DS3 interface objects.
DS3/E3 MIB. This statement became obsolete when support was added for
dynamic DS3 interface objects.
Required groups
| mandatory | juniDs3Group3 |
OID
.1.3.6.1.4.1.4874.2.2.4.4.1.4Obsolete compliance statement for entities which implement the Juniper
DS3/E3 MIB. This statement became obsolete when far end invalid seconds
objects and more configuration objects were added.
DS3/E3 MIB. This statement became obsolete when far end invalid seconds
objects and more configuration objects were added.
Required groups
| mandatory | juniDs3Group4 |
OID
.1.3.6.1.4.1.4874.2.2.4.4.1.5Obsolete compliance statement for entities which implement the Juniper
DS3/E3 MIB. This statement became obsolete when support was added for
far end generator number, port number and carrier.
DS3/E3 MIB. This statement became obsolete when support was added for
far end generator number, port number and carrier.
Required groups
| mandatory | juniDs3Group5 | |
| mandatory | juniDs3FarEndGroup |
OID
.1.3.6.1.4.1.4874.2.2.4.4.1.6The compliance statement for entities which implement the Juniper
DS3/E3 MIB.
DS3/E3 MIB.
Required groups
| mandatory | juniDs3Group5 | |
| mandatory | juniDs3FarEndGroup2 |