JUNIPER-TWAMP-MIB Table View

This table provides measurements from the latest individual TWAMP
probe samples.  Within each sample, the specific measurement type
is identified by jnxTwampClientResSampleType.  Note, if the latest
probe was unsuccessful, no measurement types will be available.
          
See the definition of JnxTwampClientMeasurementType for details on
the types of measurements available.

jnxTwampClientResultsSampleEntry row .1.3.6.1.4.1.2636.3.77.1.1.1.1

Each entry provides a specific measurement type for a single
probe.

Indexes

DISMAN-PING-MIBpingCtlOwnerIndex DISMAN-PING-MIBpingCtlTestName jnxTwampResSampleType

Column	Syntax	OID
jnxTwampResSampleType This object identifies the specific measurement type returned by jnxTwampResSampleValue.	JnxTwampClientMeasurementType Type Values: 1 roundTripTime 2 rttJitter 3 rttInterarrivalJitter 4 egress 5 egressJitter 6 egressInterarrivalJitter 7 ingress 8 ingressJitter 9 ingressInterarrivalJitter	.1.3.6.1.4.1.2636.3.77.1.1.1.1.1
jnxTwampResSampleValue This object returns the measurement identified by the corresponding jnxTwampResSampleType.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2636.3.77.1.1.1.1.2
jnxTwampResSampleDate This object provides the date and time of when this measurement was obtained.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2636.3.77.1.1.1.1.3

This table provides a summary of the results for a specific
TWAMP entry (identified by pingCtlOwnerIndex/pingCtlTestName).
The scope of the summary is identified by jnxTwampClientResSumCollection.

jnxTwampClientResultsSummaryEntry row .1.3.6.1.4.1.2636.3.77.1.1.2.1

Each entry in the table provides a summary of the TWAMP results
over a single collection of probes(test session). For each TWAMP entry, there
are several collections maintained: the current test, the
most recently comp…

Indexes

DISMAN-PING-MIBpingCtlOwnerIndex DISMAN-PING-MIBpingCtlTestName jnxTwampResSumCollection

Column	Syntax	OID
jnxTwampResSumCollection This object identifes the collection of probes over which the summary data represented by the other objects in this table applies. Note, if a collection type is not supported or not configured, it will not be instantia…	JnxTwampClientCollectionType Type Values: 1 currentTest 2 lastCompletedTest 3 movingAverage 4 allTests	.1.3.6.1.4.1.2636.3.77.1.1.2.1.1
jnxTwampResSumSent This object provides the number of probes sent within the collection identified by jnxTwampResSumCollection.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.77.1.1.2.1.2
jnxTwampResSumReceived This object provides the number of probes received within the collection identified by jnxTwampResSumCollection.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.77.1.1.2.1.3
jnxTwampResSumPercentLost This object provides the percentage of probes lost within the collection identified by jnxTwampResSumCollection.	JnxTwampPercentType Type Constraints: range: 0..100000000	.1.3.6.1.4.1.2636.3.77.1.1.2.1.4
jnxTwampResSumDate This object provides the date and time of when the most recent probe within the collection identified by jnxTwampResSumCollection was completed.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2636.3.77.1.1.2.1.5

This table provides a set of calculated values for each
TWAMP entry, for each collection of probes maintained within that
entry, and for each supported measurement set within that
collection of probes.
          
This table will skip over any measurement set for which
there are 0 samples.

jnxTwampClientResultsCalculatedEntry row .1.3.6.1.4.1.2636.3.77.1.1.3.1

Indexes

DISMAN-PING-MIBpingCtlOwnerIndex DISMAN-PING-MIBpingCtlTestName jnxTwampResSumCollection jnxTwampResCalcSet

Column	Syntax	OID
jnxTwampResCalcSet This object identifies the measurement set upon which the calculations returned by the other objects in this table are based.	JnxTwampClientMeasurementSet Type Values: 1 roundTripTime 2 posRttJitter 3 negRttJitter 4 egress 5 posEgressJitter 6 negEgressJitter 7 ingress 8 posIngressJitter 9 negIngressJitter	.1.3.6.1.4.1.2636.3.77.1.1.3.1.1
jnxTwampResCalcSamples The number of samples used in this calculations.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.77.1.1.3.1.2
jnxTwampResCalcMin The minimum of all the samples in the collection and measurement set associated with this row. Values are provided in units of microseconds.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.77.1.1.3.1.3
jnxTwampResCalcMax The maximum of all the samples in the collection and measurement set associated with this row. Values are provided in units of microseconds.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.77.1.1.3.1.4
jnxTwampResCalcAverage The average of all the samples in the collection and measurement set associated with this row. Values are provided in units of microseconds.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.77.1.1.3.1.5
jnxTwampResCalcPkToPk The difference between the minimum and maximum of all the samples in the collection and measurement set associated with this row. Values are provided in units of microseconds.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.77.1.1.3.1.6
jnxTwampResCalcStdDev The standard deviation calculated over all the samples in the collection and measurement set associated with this row. Values are provided in units of microseconds.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.77.1.1.3.1.7
jnxTwampResCalcSum The sum of all the samples in the collection and measurement set associated with this row. Values are provided in units of microseconds.	HCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.2636.3.77.1.1.3.1.8

This table provides measurements for individual TWAMP probe samples(test sessions).
In addition to the last completed sample, a configurable number of
the most recent samples are available as well.  Within each sample,
the specific measurement type is identified by
jnxTwampHistSampleType.  Note, if probe was unsuccessful, no
measurement types will be available for that history entry.
          
See the definition of JnxTwampClientMeasurementType for details on
of measurements available.

jnxTwampClientHistorySampleEntry row .1.3.6.1.4.1.2636.3.77.1.1.4.1

Indexes

DISMAN-PING-MIBpingCtlOwnerIndex DISMAN-PING-MIBpingCtlTestName DISMAN-PING-MIBpingProbeHistoryIndex jnxTwampHistSampleType

Column	Syntax	OID
jnxTwampHistSampleType This object identifies the specific measurement type returned by jnxTwampHistSampleValue.	JnxTwampClientMeasurementType Type Values: 1 roundTripTime 2 rttJitter 3 rttInterarrivalJitter 4 egress 5 egressJitter 6 egressInterarrivalJitter 7 ingress 8 ingressJitter 9 ingressInterarrivalJitter	.1.3.6.1.4.1.2636.3.77.1.1.4.1.1
jnxTwampHistSampleValue This object returns the measurement identified by the corresponding jnxTwampHistSampleType.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2636.3.77.1.1.4.1.2

This table provides historical summary data for each collection
of probes(test session) within each TWAMP Control Entry, similar to the
jnxTwampClientResultsSummaryTable.
          
In addition to the current summary, this table provides the same
number of historical entries as the jnxTwampClientHistorySampleTable.

jnxTwampClientHistorySummaryEntry row .1.3.6.1.4.1.2636.3.77.1.1.5.1

Indexes

DISMAN-PING-MIBpingCtlOwnerIndex DISMAN-PING-MIBpingCtlTestName DISMAN-PING-MIBpingProbeHistoryIndex jnxTwampHistSumCollection

Column	Syntax	OID
jnxTwampHistSumCollection Identifies the collection of probes whose results are summarized by this row. At this time, historical summaries are available only for the current test (currentTest(1)).	JnxTwampClientCollectionType Type Values: 1 currentTest 2 lastCompletedTest 3 movingAverage 4 allTests	.1.3.6.1.4.1.2636.3.77.1.1.5.1.1
jnxTwampHistSumSent This object provides the number of probes sent within the collection identified by jnxTwampHistSumCollection.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.77.1.1.5.1.2
jnxTwampHistSumReceived This object provides the number of probes received within the collection identified by jnxTwampHistSumCollection.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.77.1.1.5.1.3
jnxTwampHistSumPercentLost This object provides the percentage of probes lost within the collection identified by jnxTwampHistSumCollection.	JnxTwampPercentType Type Constraints: range: 0..100000000	.1.3.6.1.4.1.2636.3.77.1.1.5.1.4

This table provides a set of calculated values for each
TWAMP control entry, for each test session maintained within that
entry, and for each supported calculated type within that
collection of probes, similar to the jnxTwampClientResultsCalculatedTable.
          
In addition to the current summary, this table provides the same
number of historical entries as the jnxTwampClientHistorySampleTable.

jnxTwampClientHistoryCalculatedEntry row .1.3.6.1.4.1.2636.3.77.1.1.6.1

Indexes

DISMAN-PING-MIBpingCtlOwnerIndex DISMAN-PING-MIBpingCtlTestName DISMAN-PING-MIBpingProbeHistoryIndex jnxTwampHistSumCollection jnxTwampHistCalcSet

Column	Syntax	OID
jnxTwampHistCalcSet This object identifies the measurement set upon which the calculations returned by the other objects in this table are based.	JnxTwampClientMeasurementSet Type Values: 1 roundTripTime 2 posRttJitter 3 negRttJitter 4 egress 5 posEgressJitter 6 negEgressJitter 7 ingress 8 posIngressJitter 9 negIngressJitter	.1.3.6.1.4.1.2636.3.77.1.1.6.1.1
jnxTwampHistCalcSamples The number of samples used in this calculations.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.77.1.1.6.1.2
jnxTwampHistCalcMin The minimum of all the samples in the collection and measurement set associated with this row. Values are provided in units of microseconds.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.77.1.1.6.1.3
jnxTwampHistCalcMax The maximum of all the samples in the collection and measurement set associated with this row. Values are provided in units of microseconds.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.77.1.1.6.1.4
jnxTwampHistCalcAverage The average of all the samples in the collection and measurement set associated with this row. Values are provided in units of microseconds.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.77.1.1.6.1.5
jnxTwampHistCalcPkToPk The difference between the minimum and maximum of all the samples in the collection and measurement set associated with this row. Values are provided in units of microseconds.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.77.1.1.6.1.6
jnxTwampHistCalcStdDev The standard deviation calculated over all the samples in the collection and measurement set associated with this row. Values are provided in units of microseconds.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.77.1.1.6.1.7
jnxTwampHistCalcSum The sum of all the samples in the collection and measurement set associated with this row. Values are provided in units of microseconds.	HCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.2636.3.77.1.1.6.1.8

Table of Client Sessions.

jnxTwampClientCCEntry row .1.3.6.1.4.1.2636.3.77.1.1.7.1

TWAMP Client Session characteristics.

Indexes

jnxTwampClientControlConnectionID

Column	Syntax	OID
jnxTwampClientControlConnectionID TWAMP Client control session ID.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2636.3.77.1.1.7.1.1
jnxTwampClientCCName Text string containing the session's unique name.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2636.3.77.1.1.7.1.2
jnxTwampClientCCStatus If the control session is active, this would return 1. If the control session does not have any currently running test sessions and is not active, this would return 2.	Enumeration Enumerated Values: 1 active 2 stopped	.1.3.6.1.4.1.2636.3.77.1.1.7.1.3
jnxTwampClientServerAddress Server IP address for TWAMP TCP control session.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2636.3.77.1.1.7.1.4
jnxTwampClientServerPort Destination port for TWAMP TCP control connection.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2636.3.77.1.1.7.1.5
jnxTwampClientTSConfiguredCount Number test sessions configured.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2636.3.77.1.1.7.1.6
jnxTwampClientTSActiveCount Number of test sessions currently running.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2636.3.77.1.1.7.1.7
jnxTwampClientAuthMode Authenticated mode for the control session.	Enumeration Enumerated Values: 1 none 2 authenticated 3 encrypted 4 controlOnlyEncrypted	.1.3.6.1.4.1.2636.3.77.1.1.7.1.8

Table of Test Sessions.

jnxTwampClientTSEntry row .1.3.6.1.4.1.2636.3.77.1.1.8.1

TWAMP Test Session characteristics.

Indexes

DISMAN-PING-MIBpingCtlOwnerIndex jnxTwampClientTestSessionID

Column	Syntax	OID
jnxTwampClientTestSessionID Test Session ID.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2636.3.77.1.1.8.1.1
jnxTwampClientTSName TWAMP Test Session Name.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2636.3.77.1.1.8.1.2
jnxTwampClientTSStatus TWAMP Test Session status.	Enumeration Enumerated Values: 1 active 2 stopped	.1.3.6.1.4.1.2636.3.77.1.1.8.1.3
jnxTwampClientTSSenderAddress Twamp Test Sender Address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2636.3.77.1.1.8.1.4
jnxTwampClientTSSenderPort TWAMP Test Session Sender Port.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2636.3.77.1.1.8.1.5
jnxTwampClientTSReflectorAddress TWAMP Test Session Reflector Address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2636.3.77.1.1.8.1.6
jnxTwampClientTSReflectorPort TWAMP Test Session Reflector Port.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2636.3.77.1.1.8.1.7