JUNIPER-MPLS-LDP-MIB Table View

This table contains information about the
MPLS Label Distribution Protocol Entities which
exist on this Label Switching Router (LSR).

jnxMplsLdpEntityEntry row .1.3.6.1.4.1.2636.3.36.1.2.3.1

An entry in this table represents an LDP entity.
An entry can be created by a network administrator
or by an SNMP agent as instructed by LDP.

Indexes

jnxMplsLdpEntityLdpId jnxMplsLdpEntityIndex

Column	Syntax	OID
jnxMplsLdpEntityLdpId The LDP identifier.	MPLS-TC-STD-MIBMplsLdpIdentifier Type Constraints: range: 6	.1.3.6.1.4.1.2636.3.36.1.2.3.1.1
jnxMplsLdpEntityIndex This index is used as a secondary index to uniquely identify this row. Before creating a row in this table, the 'jnxMplsLdpEntityIndexNext' object should be retrieved. That value should be used for the value of this in…	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.2636.3.36.1.2.3.1.2
jnxMplsLdpEntityProtocolVersion The version number of the LDP protocol which will be used in the session initialization message. Section 3.5.3 in the LDP Specification specifies that the version of the LDP protocol is negotiated during …	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.2636.3.36.1.2.3.1.3
jnxMplsLdpEntityAdminStatus The administrative status of this LDP Entity. If this object is changed from 'enable' to 'disable' and this entity has already attempted to establish contact with a Peer, then all contact with that Peer is lost and all …	Enumeration Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2636.3.36.1.2.3.1.4
jnxMplsLdpEntityOperStatus The operational status of this LDP Entity.	Enumeration Enumerated Values: 1 unknown 2 enabled 3 disabled	.1.3.6.1.4.1.2636.3.36.1.2.3.1.5
jnxMplsLdpEntityTcpDscPort The TCP Discovery Port for LDP. The default value is the well-known value of this port.	INET-ADDRESS-MIBInetPortNumber Type Constraints: range: 0..65535	.1.3.6.1.4.1.2636.3.36.1.2.3.1.6
jnxMplsLdpEntityUdpDscPort The UDP Discovery Port for LDP. The default value is the well-known value for this port.	INET-ADDRESS-MIBInetPortNumber Type Constraints: range: 0..65535	.1.3.6.1.4.1.2636.3.36.1.2.3.1.7
jnxMplsLdpEntityMaxPduLength The maximum PDU Length that is sent in the Common Session Parameters of an Initialization Message. According to the LDP Specification [RFC3036] a value of 255 or less specifies the default maximum length of 4096 octets,…	octetsUnsigned32 Constraints: range: 256-65535	.1.3.6.1.4.1.2636.3.36.1.2.3.1.8
jnxMplsLdpEntityKeepAliveHoldTimer The 16-bit integer value which is the proposed keep alive hold timer for this LDP Entity.	secondsInteger32 Constraints: range: 1-65535	.1.3.6.1.4.1.2636.3.36.1.2.3.1.9
jnxMplsLdpEntityHelloHoldTimer The 16-bit integer value which is the proposed Hello hold timer for this LDP Entity. The Hello Hold time in seconds. An LSR maintains a record of Hellos received from potential peers. This object represe…	secondsInteger32 Constraints: range: 0-65535	.1.3.6.1.4.1.2636.3.36.1.2.3.1.10
jnxMplsLdpEntityInitSesThreshold When attempting to establish a session with a given Peer, the given LDP Entity should send out the SNMP notification, 'jnxMplsLdpInitSesThresholdExceeded', when the number of Session Initialization messages sent exceeds…	Integer32 Constraints: range: 0-100	.1.3.6.1.4.1.2636.3.36.1.2.3.1.11
jnxMplsLdpEntityLabelDistMethod For any given LDP session, the method of label distribution must be specified.	MPLS-TC-STD-MIBMplsLabelDistributionMethod Type Values: 1 downstreamOnDemand 2 downstreamUnsolicited	.1.3.6.1.4.1.2636.3.36.1.2.3.1.12
jnxMplsLdpEntityLabelRetentionMode The LDP Entity can be configured to use either conservative or liberal label retention mode. If the value of this object is conservative(1) then advertized label mappings are retained only if they will be…	MPLS-TC-STD-MIBMplsRetentionMode Type Values: 1 conservative 2 liberal	.1.3.6.1.4.1.2636.3.36.1.2.3.1.13
jnxMplsLdpEntityPathVectorLimit If the value of this object is 0 (zero) then Loop Dection for Path Vectors is disabled. Otherwise, if this object has a value greater than zero, then Loop Dection for Path Vectors is enabled, and the Path…	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.2636.3.36.1.2.3.1.14
jnxMplsLdpEntityHopCountLimit If the value of this object is 0 (zero), then Loop Detection using Hop Counters is disabled. If the value of this object is greater than 0 (zero) then Loop Detection using Hop Counters is enabled, and thi…	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.2636.3.36.1.2.3.1.15
jnxMplsLdpEntityTargetPeer If this LDP entity uses targeted peer then set this to true.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2636.3.36.1.2.3.1.16
jnxMplsLdpEntityTargetPeerAddrType The type of the internetwork layer address used for the Extended Discovery. This object indicates how the value of jnxMplsLdpEntityTargetPeerAddr is to be interpreted.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2636.3.36.1.2.3.1.17
jnxMplsLdpEntityTargetPeerAddr The value of the internetwork layer address used for the Extended Discovery.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2636.3.36.1.2.3.1.18
jnxMplsLdpEntityLabelType Specifies the optional parameters for the LDP Initialization Message. If the value is generic(1) then no optional parameters will be sent in the LDP Initialization message associated with this Entity. If…	MPLS-TC-STD-MIBMplsLdpLabelType Type Values: 1 generic 2 atm 3 frameRelay	.1.3.6.1.4.1.2636.3.36.1.2.3.1.19
jnxMplsLdpEntityDiscontinuityTime The value of sysUpTime on the most recent occasion at which any one or more of this entity's counters suffered a discontinuity. The relevant counters are the specific instances associated with this entity of any Counte…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.2636.3.36.1.2.3.1.20
jnxMplsLdpEntityStorageType The storage type for this entry.	SNMPv2-TCStorageType Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.2636.3.36.1.2.3.1.21
jnxMplsLdpEntityRowStatus An object that allows entries in this table to be created and deleted using the RowStatus convention.	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2636.3.36.1.2.3.1.22

This table is a read-only table which augments
the jnxMplsLdpEntityTable.  The purpose of this
table is to keep statistical information about
the LDP Entities on the LSR.

jnxMplsLdpEntityStatsEntry row .1.3.6.1.4.1.2636.3.36.1.2.4.1

A row in this table contains statistical information
about an LDP Entity. Some counters contained in a
row are for fatal errors received during a former
LDP Session associated with this entry. For example,
an Ldp Pdu …

Indexes

No indexes recorded

Column	Syntax	OID
jnxMplsLdpAttemptedSessions A count of the total attempted sessions for this LDP Entity. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the va…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.36.1.2.4.1.1
jnxMplsLdpSesRejectedNoHelloErrors A count of the Session Rejected/No Hello Error Notification Messages sent or received by this LDP Entity. Discontinuities in the value of this counter can occur at re-initialization of the management syst…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.36.1.2.4.1.2
jnxMplsLdpSesRejectedAdErrors A count of the Session Rejected/Parameters Advertisement Mode Error Notification Messages sent or received by this LDP Entity. Discontinuities in the value of this counter can occur at re-initialization o…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.36.1.2.4.1.3
jnxMplsLdpSesRejectedMaxPduErrors A count of the Session Rejected/Parameters Max Pdu Length Error Notification Messages sent or received by this LDP Entity. Discontinuities in the value of this counter can occur at re-initialization of th…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.36.1.2.4.1.4
jnxMplsLdpSesRejectedLRErrors A count of the Session Rejected/Parameters Label Range Notification Messages sent or received by this LDP Entity. Discontinuities in the value of this counter can occur at re-initialization of the managem…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.36.1.2.4.1.5
jnxMplsLdpBadLdpIdentifierErrors This object counts the number of Bad LDP Identifier Fatal Errors detected by the session(s) (past and present) associated with this LDP Entity. Discontinuities in the value of this counter can occur at re…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.36.1.2.4.1.6
jnxMplsLdpBadPduLengthErrors This object counts the number of Bad Pdu Length Fatal Errors detected by the session(s) (past and present) associated with this LDP Entity. Discontinuities in the value of this counter can occur at re-ini…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.36.1.2.4.1.7
jnxMplsLdpBadMessageLengthErrors This object counts the number of Bad Message Length Fatal Errors detected by the session(s) (past and present) associated with this LDP Entity. Discontinuities in the value of this counter can occur at re…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.36.1.2.4.1.8
jnxMplsLdpBadTlvLengthErrors This object counts the number of Bad TLV Length Fatal Errors detected by the session(s) (past and present) associated with this LDP Entity. Discontinuities in the value of this counter can occur at re-ini…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.36.1.2.4.1.9
jnxMplsLdpMalformedTlvValueErrors This object counts the number of Malformed TLV Value Fatal Errors detected by the session(s) (past and present) associated with this LDP Entity. Discontinuities in the value of this counter can occur at r…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.36.1.2.4.1.10
jnxMplsLdpKeepAliveTimerExpErrors This object counts the number of Session Keep Alive Timer Expired Errors detected by the session(s) (past and present) associated with this LDP Entity. Discontinuities in the value of this counter can occ…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.36.1.2.4.1.11
jnxMplsLdpShutdownNotifReceived This object counts the number of Shutdown Notfications received related to session(s) (past and present) associated with this LDP Entity. Discontinuities in the value of this counter can occur …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.36.1.2.4.1.12
jnxMplsLdpShutdownNotifSent This object counts the number of Shutdown Notfications sent related to session(s) (past and present) associated with this LDP Entity. Discontinuities in the value of this counter can occur at re-initializ…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.36.1.2.4.1.13

Information about LDP peers known by Entities in
the jnxMplsLdpEntityTable.  The information in this table
is based on information from the Entity-Peer interaction
during session initialization but is not appropriate
for the jnxMplsLdpSessionTable, because objects in this
table may or may not be used in session establishment.

jnxMplsLdpPeerEntry row .1.3.6.1.4.1.2636.3.36.1.3.2.1

Information about a single Peer which is related
to a Session. NOTE: this table is augmented by
the jnxMplsLdpSessionTable.

Indexes

jnxMplsLdpEntityLdpId jnxMplsLdpEntityIndex jnxMplsLdpPeerLdpId

Column	Syntax	OID
jnxMplsLdpPeerLdpId The LDP identifier of this LDP Peer.	MPLS-TC-STD-MIBMplsLdpIdentifier Type Constraints: range: 6	.1.3.6.1.4.1.2636.3.36.1.3.2.1.1
jnxMplsLdpPeerLabelDistMethod For any given LDP session, the method of label distribution must be specified.	MPLS-TC-STD-MIBMplsLabelDistributionMethod Type Values: 1 downstreamOnDemand 2 downstreamUnsolicited	.1.3.6.1.4.1.2636.3.36.1.3.2.1.2
jnxMplsLdpPeerPathVectorLimit If the value of this object is 0 (zero) then Loop Dection for Path Vectors for this Peer is disabled. Otherwise, if this object has a value greater than zero, then Loop Dection for Path Vectors for this …	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.2636.3.36.1.3.2.1.3

A table of Sessions between the LDP Entities and
LDP Peers.  Each row represents a single session.

jnxMplsLdpSessionEntry row .1.3.6.1.4.1.2636.3.36.1.3.3.1

An entry in this table represents information on a
single session between an LDP Entity and LDP Peer.
The information contained in a row is read-only.

Please note: the Path Vector Limit for the
Session is …

Indexes

No indexes recorded

Column	Syntax	OID
jnxMplsLdpSesStateLastChange The value of this object is sysUpTime when the most recent change in the jnxMplsLdpSesState object occurred. When the entry is created, then this object has the value of sysUpTime when the entry was created.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.2636.3.36.1.3.3.1.1
jnxMplsLdpSesState The current state of the session, all of the states 1 to 5 are based on the state machine for session negotiation behavior.	Enumeration Enumerated Values: 1 nonexistent 2 initialized 3 openrec 4 opensent 5 operational	.1.3.6.1.4.1.2636.3.36.1.3.3.1.2
jnxMplsLdpSesProtocolVersion The version of the LDP Protocol which this session is using. This is the version of the LDP protocol which has been negotiated during session initialization.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.2636.3.36.1.3.3.1.3
jnxMplsLdpSesKeepAliveHoldTimeRem The keep alive hold time remaining for this session.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.2636.3.36.1.3.3.1.4
jnxMplsLdpSesMaxPduLength The value of maximum allowable length for LDP PDUs for this session. This value may have been negotiated during the Session Initialization. This object is related to the jnxMplsLdpEntityMaxPduLength object. The jnxMp…	octetsUnsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.2636.3.36.1.3.3.1.5
jnxMplsLdpSesDiscontinuityTime The value of sysUpTime on the most recent occasion at which any one or more of this session's counters suffered a discontinuity. The relevant counters are the specific instances associated with this session of any Coun…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.2636.3.36.1.3.3.1.6

A table of statistics for Sessions between
LDP Entities and LDP Peers.

jnxMplsLdpSesStatsEntry row .1.3.6.1.4.1.2636.3.36.1.3.4.1

An entry in this table represents statistical
information on a single session between an LDP
Entity and LDP Peer.

Indexes

No indexes recorded

Column	Syntax	OID
jnxMplsLdpSesStatsUnkMesTypeErrors This object counts the number of Unknown Message Type Errors detected during this session. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at othe…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.36.1.3.4.1.1
jnxMplsLdpSesStatsUnkTlvErrors This object counts the number of Unknown TLV Errors detected during this session. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times a…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.36.1.3.4.1.2

A table of Hello Adjacencies for Sessions.

jnxMplsLdpHelloAdjacencyEntry row .1.3.6.1.4.1.2636.3.36.1.3.5.1.1

Each row represents a single LDP Hello Adjacency.
An LDP Session can have one or more Hello adjacencies.

Indexes

jnxMplsLdpEntityLdpId jnxMplsLdpEntityIndex jnxMplsLdpPeerLdpId jnxMplsLdpHelloAdjIndex

Column	Syntax	OID
jnxMplsLdpHelloAdjIndex An identifier for this specific adjacency.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.2636.3.36.1.3.5.1.1.1
jnxMplsLdpHelloAdjHoldTimeRem The time remaining for this Hello Adjacency. This interval will change when the 'next' Hello message which corresponds to this Hello Adjacency is received.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.2636.3.36.1.3.5.1.1.2
jnxMplsLdpHelloAdjType This adjacency is the result of a 'link' hello if the value of this object is link(1). Otherwise, it is a result of a 'targeted' hello, targeted(2).	Enumeration Enumerated Values: 1 link 2 targeted	.1.3.6.1.4.1.2636.3.36.1.3.5.1.1.3

A table of LDP LSP's which
map to a Segment Table in the
the LSR MIB's (either the mplsInSegmentTable
or mplsOutSegmentTable) AND to the
LSR MIB's mplsXCTable.

jnxMplsLdpLspEntry row .1.3.6.1.4.1.2636.3.36.1.3.6.1

An entry in this table represents information on a
single LDP LSP which is represented by
a session's index triple (jnxMplsLdpEntityLdpId,
jnxMplsLdpEntityIndex, jnxMplsLdpPeerLdpId) AND the
index tuple (jnxMplsLdpLspIf…

Indexes

jnxMplsLdpEntityLdpId jnxMplsLdpEntityIndex jnxMplsLdpPeerLdpId jnxMplsLdpLspIfIndex jnxMplsLdpLspLabel

Column	Syntax	OID
jnxMplsLdpLspIfIndex The ifIndex value associated with this LSP.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2636.3.36.1.3.6.1.1
jnxMplsLdpLspLabel The LDP label for this LSP.	MPLS-TC-STD-MIBMplsLabel Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.36.1.3.6.1.2
jnxMplsLdpLspLabelType The Layer 2 Label Type.	MPLS-TC-STD-MIBMplsLdpLabelType Type Values: 1 generic 2 atm 3 frameRelay	.1.3.6.1.4.1.2636.3.36.1.3.6.1.3
jnxMplsLdpLspType The type of LSP connection. The possible values are: unknown(1) -- if the LSP is not known to be one of the following. terminatingLsp(2) -- if the …	MPLS-TC-STD-MIBMplsLspType Type Values: 1 unknown 2 terminatingLsp 3 originatingLsp 4 crossConnectingLsp	.1.3.6.1.4.1.2636.3.36.1.3.6.1.4
jnxMplsLdpLspLsrInSegmentPointer If this LSP terminates or is cross-connecting on this LSR, then this RowPointer should point to an instance of an object in the mplsLsrInSegmentTable. In other words if the value of jnxMplsLdpLspType is terminatingLsp(2…	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.2636.3.36.1.3.6.1.5
jnxMplsLdpLspLsrOutSegmentPointer If this LSP originates or is cross-connecting on this LSR, then this RowPointer should point to an instance of an object in the LSR-MIB's mplsOutSegmentTable. In other words if the value of jnxMplsLdpLspType is originat…	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.2636.3.36.1.3.6.1.6
jnxMplsLdpLspLsrXCPointer If this LSP is cross-connecting on this LSR, then this RowPointer should point to an instance of an object in the LSR-MIB's mplsXCTable. In other words if the value of jnxMplsLdpLspType is crossConnectingLsp(4), then th…	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.2636.3.36.1.3.6.1.7

This table represents the FEC
(Forwarding Equivalence Class)
Information associated with an LSP.

jnxMplsFecEntry row .1.3.6.1.4.1.2636.3.36.1.3.7.2.1

Each row represents a single FEC Element.

Indexes

jnxMplsFecIndex

Column	Syntax	OID
jnxMplsFecIndex The index which uniquely identifies this entry.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.2636.3.36.1.3.7.2.1.1
jnxMplsFecType The type of the FEC. If the value of this object is 'prefix(1)' then the FEC type described by this row is for address prefixes. If the value of this object is 'hostAddress(2)' then the FEC type describe…	Enumeration Enumerated Values: 1 prefix 2 hostAddress	.1.3.6.1.4.1.2636.3.36.1.3.7.2.1.2
jnxMplsFecAddrLength If the value of 'jnxMplsFecType' is 'prefix(1)' then the value of this object is the length in bits of the address prefix represented by 'jnxMplsFecAddr', or if the length is zero then this is a special value which indi…	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.2636.3.36.1.3.7.2.1.3
jnxMplsFecAddrFamily The value of this object is from the Address Family Numbers.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2636.3.36.1.3.7.2.1.4
jnxMplsFecAddr If the value of 'jnxMplsFecType' is 'prefix(1)' then the value of this object is the address prefix. If the value of the 'jnxMplsFecAddrLength' is object is zero, then this object should also be zero. If …	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2636.3.36.1.3.7.2.1.5
jnxMplsFecStorageType The storage type for this entry.	SNMPv2-TCStorageType Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.2636.3.36.1.3.7.2.1.6
jnxMplsFecRowStatus An object that allows entries in this table to be created and deleted using the RowStatus convention.	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2636.3.36.1.3.7.2.1.7

A table which shows the relationship between
LDP LSP's and FECs.  Each row represents
a single LSP to FEC association.
This table is read-only.

jnxMplsLdpLspFecEntry row .1.3.6.1.4.1.2636.3.36.1.3.8.1

An entry represents a LDP LSP
to FEC association.

Indexes

jnxMplsLdpEntityLdpId jnxMplsLdpEntityIndex jnxMplsLdpPeerLdpId jnxMplsLdpLspIfIndex jnxMplsLdpLspLabel jnxMplsFecIndex

Column	Syntax	OID
jnxMplsLdpLspFecOperStatus An indication of the operational status of the FEC associated with LDP LSP. unknown(1) - this is a temporary state which may indicate the LSP-FEC association is in a state of tra…	Enumeration Enumerated Values: 1 unknown 2 inUse 3 notInUse	.1.3.6.1.4.1.2636.3.36.1.3.8.1.1
jnxMplsLdpLspFecLastChange This value of sysUpTime when the jnxMplsLdpLspFecOperStatus last changed state.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.2636.3.36.1.3.8.1.2
jnxMplsLdpLspFecRowStatus An object that allows entries in this table to be created and deleted using the RowStatus convention.	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2636.3.36.1.3.8.1.3

This table 'extends' the jnxMplsLdpSessionTable.
This table is used to store Label Address Information
from Label Address Messages received by this LSR from
Peers.  This table is read-only and should be updated
when Label Withdraw Address Messages are received, i.e.
Rows should be deleted as apropriate.
          
NOTE:  since more than one address may be contained
in a Label Address Message, this table 'extends',
rather than 'AUGMENTS' the jnxMplsLdpSessionTable's
information.

jnxMplsLdpSesPeerAddrEntry row .1.3.6.1.4.1.2636.3.36.1.3.9.1

An entry in this table represents information on
session's for a single next hop address which was
advertised in an Address Message from the LDP peer.
The information contained in a row is read-only.

Indexes

jnxMplsLdpEntityLdpId jnxMplsLdpEntityIndex jnxMplsLdpPeerLdpId jnxMplsLdpSesPeerAddrIndex

Column	Syntax	OID
jnxMplsLdpSesPeerAddrIndex An index which uniquely identifies this entry within a given session.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.2636.3.36.1.3.9.1.1
jnxMplsLdpSesPeerNextHopAddrType The internetwork layer address type of this Next Hop Address as specified in the Label Address Message associated with this Session. The value of this object indicates how to interpret the value of jnxMplsLdpSessionPeer…	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2636.3.36.1.3.9.1.2
jnxMplsLdpSesPeerNextHopAddr The value of the next hop address.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2636.3.36.1.3.9.1.3