JUNIPER-MPLS-LDP-MIB
This MIB contains managed object definitions for the
'Multiprotocol Label Switching, Label Distribution
Protocol, LDP' document.
- Source file
JUNIPER-MPLS-LDP-MIB- Last revised
- Identity
jnxMplsLdpMIB- Base OID
1.3.6.1.4.1.2636.3.36
Imported Objects
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| JUNIPER-SMI | jnxMibs |
| MPLS-TC-STD-MIB | MplsLabel MplsLabelDistributionMethod MplsLdpIdentifier MplsLdpLabelType MplsLspType MplsLsrIdentifier MplsRetentionMode |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | RowPointer RowStatus StorageType TimeInterval TimeStamp TruthValue |
Net-SNMP examples using the juniper MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'JUNIPER-MPLS-LDP-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'JUNIPER-MPLS-LDP-MIB::jnxMplsLdpMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JUNIPER-MPLS-LDP-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JUNIPER-MPLS-LDP-MIB::jnxMplsLdpMIB'
Objects (107)
Showing 107 of 107 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.2636.3.36 |
||
.1.3.6.1.4.1.2636.3.36.1 |
||
.1.3.6.1.4.1.2636.3.36.1.1 |
||
.1.3.6.1.4.1.2636.3.36.1.1.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.2636.3.36.1.1.2 |
|
.1.3.6.1.4.1.2636.3.36.1.2 |
||
.1.3.6.1.4.1.2636.3.36.1.2.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.2636.3.36.1.2.2 |
|
.1.3.6.1.4.1.2636.3.36.1.2.3 |
||
.1.3.6.1.4.1.2636.3.36.1.2.3.1 |
||
.1.3.6.1.4.1.2636.3.36.1.2.3.1.1 |
||
|
secondsInteger32
|
.1.3.6.1.4.1.2636.3.36.1.2.3.1.10 |
|
|
Integer32
|
.1.3.6.1.4.1.2636.3.36.1.2.3.1.11 |
|
.1.3.6.1.4.1.2636.3.36.1.2.3.1.12 |
||
.1.3.6.1.4.1.2636.3.36.1.2.3.1.13 |
||
|
Integer32
|
.1.3.6.1.4.1.2636.3.36.1.2.3.1.14 |
|
|
Integer32
|
.1.3.6.1.4.1.2636.3.36.1.2.3.1.15 |
|
.1.3.6.1.4.1.2636.3.36.1.2.3.1.16 |
||
.1.3.6.1.4.1.2636.3.36.1.2.3.1.17 |
||
.1.3.6.1.4.1.2636.3.36.1.2.3.1.18 |
||
.1.3.6.1.4.1.2636.3.36.1.2.3.1.19 |
||
|
Unsigned32
|
.1.3.6.1.4.1.2636.3.36.1.2.3.1.2 |
|
.1.3.6.1.4.1.2636.3.36.1.2.3.1.20 |
||
.1.3.6.1.4.1.2636.3.36.1.2.3.1.21 |
||
.1.3.6.1.4.1.2636.3.36.1.2.3.1.22 |
||
|
Integer32
|
.1.3.6.1.4.1.2636.3.36.1.2.3.1.3 |
|
|
Enumeration
|
.1.3.6.1.4.1.2636.3.36.1.2.3.1.4 |
|
|
Enumeration
|
.1.3.6.1.4.1.2636.3.36.1.2.3.1.5 |
|
.1.3.6.1.4.1.2636.3.36.1.2.3.1.6 |
||
.1.3.6.1.4.1.2636.3.36.1.2.3.1.7 |
||
|
octetsUnsigned32
|
.1.3.6.1.4.1.2636.3.36.1.2.3.1.8 |
|
|
secondsInteger32
|
.1.3.6.1.4.1.2636.3.36.1.2.3.1.9 |
|
.1.3.6.1.4.1.2636.3.36.1.2.4 |
||
.1.3.6.1.4.1.2636.3.36.1.2.4.1 |
||
.1.3.6.1.4.1.2636.3.36.1.2.4.1.1 |
||
.1.3.6.1.4.1.2636.3.36.1.2.4.1.10 |
||
.1.3.6.1.4.1.2636.3.36.1.2.4.1.11 |
||
.1.3.6.1.4.1.2636.3.36.1.2.4.1.12 |
||
.1.3.6.1.4.1.2636.3.36.1.2.4.1.13 |
||
.1.3.6.1.4.1.2636.3.36.1.2.4.1.2 |
||
.1.3.6.1.4.1.2636.3.36.1.2.4.1.3 |
||
.1.3.6.1.4.1.2636.3.36.1.2.4.1.4 |
||
.1.3.6.1.4.1.2636.3.36.1.2.4.1.5 |
||
.1.3.6.1.4.1.2636.3.36.1.2.4.1.6 |
||
.1.3.6.1.4.1.2636.3.36.1.2.4.1.7 |
||
.1.3.6.1.4.1.2636.3.36.1.2.4.1.8 |
||
.1.3.6.1.4.1.2636.3.36.1.2.4.1.9 |
||
.1.3.6.1.4.1.2636.3.36.1.3 |
||
.1.3.6.1.4.1.2636.3.36.1.3.1 |
||
.1.3.6.1.4.1.2636.3.36.1.3.2 |
||
.1.3.6.1.4.1.2636.3.36.1.3.2.1 |
||
.1.3.6.1.4.1.2636.3.36.1.3.2.1.1 |
||
.1.3.6.1.4.1.2636.3.36.1.3.2.1.2 |
||
|
Integer32
|
.1.3.6.1.4.1.2636.3.36.1.3.2.1.3 |
|
.1.3.6.1.4.1.2636.3.36.1.3.3 |
||
.1.3.6.1.4.1.2636.3.36.1.3.3.1 |
||
.1.3.6.1.4.1.2636.3.36.1.3.3.1.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.2636.3.36.1.3.3.1.2 |
|
|
Integer32
|
.1.3.6.1.4.1.2636.3.36.1.3.3.1.3 |
|
.1.3.6.1.4.1.2636.3.36.1.3.3.1.4 |
||
|
octetsUnsigned32
|
.1.3.6.1.4.1.2636.3.36.1.3.3.1.5 |
|
.1.3.6.1.4.1.2636.3.36.1.3.3.1.6 |
||
.1.3.6.1.4.1.2636.3.36.1.3.4 |
||
.1.3.6.1.4.1.2636.3.36.1.3.4.1 |
||
.1.3.6.1.4.1.2636.3.36.1.3.4.1.1 |
||
.1.3.6.1.4.1.2636.3.36.1.3.4.1.2 |
||
.1.3.6.1.4.1.2636.3.36.1.3.5 |
||
.1.3.6.1.4.1.2636.3.36.1.3.5.1 |
||
.1.3.6.1.4.1.2636.3.36.1.3.5.1.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.2636.3.36.1.3.5.1.1.1 |
|
.1.3.6.1.4.1.2636.3.36.1.3.5.1.1.2 |
||
|
Enumeration
|
.1.3.6.1.4.1.2636.3.36.1.3.5.1.1.3 |
|
.1.3.6.1.4.1.2636.3.36.1.3.6 |
||
.1.3.6.1.4.1.2636.3.36.1.3.6.1 |
||
.1.3.6.1.4.1.2636.3.36.1.3.6.1.1 |
||
.1.3.6.1.4.1.2636.3.36.1.3.6.1.2 |
||
.1.3.6.1.4.1.2636.3.36.1.3.6.1.3 |
||
.1.3.6.1.4.1.2636.3.36.1.3.6.1.4 |
||
.1.3.6.1.4.1.2636.3.36.1.3.6.1.5 |
||
.1.3.6.1.4.1.2636.3.36.1.3.6.1.6 |
||
.1.3.6.1.4.1.2636.3.36.1.3.6.1.7 |
||
.1.3.6.1.4.1.2636.3.36.1.3.7 |
||
|
Unsigned32
|
.1.3.6.1.4.1.2636.3.36.1.3.7.1 |
|
.1.3.6.1.4.1.2636.3.36.1.3.7.2 |
||
.1.3.6.1.4.1.2636.3.36.1.3.7.2.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.2636.3.36.1.3.7.2.1.1 |
|
|
Enumeration
|
.1.3.6.1.4.1.2636.3.36.1.3.7.2.1.2 |
|
|
Integer32
|
.1.3.6.1.4.1.2636.3.36.1.3.7.2.1.3 |
|
.1.3.6.1.4.1.2636.3.36.1.3.7.2.1.4 |
||
.1.3.6.1.4.1.2636.3.36.1.3.7.2.1.5 |
||
.1.3.6.1.4.1.2636.3.36.1.3.7.2.1.6 |
||
.1.3.6.1.4.1.2636.3.36.1.3.7.2.1.7 |
||
.1.3.6.1.4.1.2636.3.36.1.3.8 |
||
.1.3.6.1.4.1.2636.3.36.1.3.8.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.2636.3.36.1.3.8.1.1 |
|
.1.3.6.1.4.1.2636.3.36.1.3.8.1.2 |
||
.1.3.6.1.4.1.2636.3.36.1.3.8.1.3 |
||
.1.3.6.1.4.1.2636.3.36.1.3.9 |
||
.1.3.6.1.4.1.2636.3.36.1.3.9.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.2636.3.36.1.3.9.1.1 |
|
.1.3.6.1.4.1.2636.3.36.1.3.9.1.2 |
||
.1.3.6.1.4.1.2636.3.36.1.3.9.1.3 |
||
.1.3.6.1.4.1.2636.3.36.2 |
||
.1.3.6.1.4.1.2636.3.36.2.0 |
||
.1.3.6.1.4.1.2636.3.36.3 |
||
.1.3.6.1.4.1.2636.3.36.3.1 |
||
.1.3.6.1.4.1.2636.3.36.3.2 |
Dependencies (9) 7 direct · 2 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- INET-ADDRESS-MIBrfc
- JUNIPER-SMIjuniper
- MPLS-TC-STD-MIBrfc
- JUNIPER-MPLS-LDP-MIBjuniperselected
Conformance Groups (4)
Compliance Statements (2)
OID
.1.3.6.1.4.1.2636.3.36.3.2.1The Module is implemented with support
for read-create and read-write. In other
words, both monitoring and configuration
are available when using this MODULE-COMPLIANCE.
for read-create and read-write. In other
words, both monitoring and configuration
are available when using this MODULE-COMPLIANCE.
Required groups
| mandatory | jnxMplsLdpGeneralGroup | |
| mandatory | jnxMplsLdpLspGroup | |
| mandatory | jnxMplsLdpNotificationsGroup | |
| optional | jnxMplsLdpLsrGroup |
This group must be supported if the LSR MIB is implemented, specifically the mplsInSegmentTable, the mplsOutSegmentTable or the mplsXCTable. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| jnxMplsLdpEntityTargetPeerAddrType | An implementation is only required to support 'unknown(0)', and IPv4 addresses. Supporting IPv6 addresses is optional. |
||
| jnxMplsLdpEntityTargetPeerAddr | An implementation is only required to support IPv4 and may optionally support IPv6 addresses. |
||
| jnxMplsLdpEntityRowStatus |
active(1)
|
Support for createAndWait and notInService is not required. |
|
| jnxMplsFecAddrFamily | An implementation is only required to support 'unknown(0)', and IPv4 addresses. Supporting IPv6 addresses is optional. |
||
| jnxMplsFecAddr | An implementation is only required to support IPv4 and may optionally support IPv6 addresses. |
||
| jnxMplsFecRowStatus | readonly |
active(1)
|
Support for createAndWait and notInService is not required. Also, the entries in this table may be created by the agent, so strictly speaking read-create functionality is not necessary, but may be nice to have. |
| jnxMplsLdpLspFecRowStatus | readonly |
active(1)
|
Support for createAndWait and notInService is not required. Also, the entries in this table may be created by the agent, so strictly speaking read-create functionality is not necessary, but may be nice to have. |
| jnxMplsLdpSesPeerNextHopAddrType | An implementation is only required to support 'unknown(0)', and IPv4 addresses. Supporting IPv6 addresses is optional. |
||
| jnxMplsLdpSesPeerNextHopAddr | An implementation is only required to support IPv4 and may optionally support IPv6 addresses. |
OID
.1.3.6.1.4.1.2636.3.36.3.2.2The Module is implemented with support
for read-only. In other words, only monitoring
is available by implementing this MODULE-COMPLIANCE.
for read-only. In other words, only monitoring
is available by implementing this MODULE-COMPLIANCE.
Required groups
| mandatory | jnxMplsLdpGeneralGroup | |
| mandatory | jnxMplsLdpLspGroup | |
| mandatory | jnxMplsLdpNotificationsGroup | |
| optional | jnxMplsLdpLsrGroup |
This group must be supported if the LSR MIB is implemented, specifically the mplsInSegmentTable, the mplsOutSegmentTable or the mplsXCTable. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| jnxMplsLdpEntityProtocolVersion | readonly | Write access is not required. | |
| jnxMplsLdpEntityAdminStatus | readonly | Write access is not required. | |
| jnxMplsLdpEntityTcpDscPort | readonly | Write access is not required. | |
| jnxMplsLdpEntityUdpDscPort | readonly | Write access is not required. | |
| jnxMplsLdpEntityMaxPduLength | readonly | Write access is not required. | |
| jnxMplsLdpEntityKeepAliveHoldTimer | readonly | Write access is not required. | |
| jnxMplsLdpEntityHelloHoldTimer | readonly | Write access is not required. | |
| jnxMplsLdpEntityInitSesThreshold | readonly | Write access is not required. | |
| jnxMplsLdpEntityLabelDistMethod | readonly | Write access is not required. | |
| jnxMplsLdpEntityLabelRetentionMode | readonly | Write access is not required. | |
| jnxMplsLdpEntityPathVectorLimit | readonly | Write access is not required. | |
| jnxMplsLdpEntityHopCountLimit | readonly | Write access is not required. | |
| jnxMplsLdpEntityTargetPeer | readonly | Write access is not required. | |
| jnxMplsLdpEntityTargetPeerAddrType | readonly | Write access is not required. An implementation is only required to support 'unknown(0)', and IPv4 addresses. Supporting IPv6 addresses is optional. |
|
| jnxMplsLdpEntityTargetPeerAddr | readonly | Write access is not required. An implementation is only required to support IPv4 and may optionally support IPv6 addresses. |
|
| jnxMplsLdpEntityLabelType | readonly | Write access is not required. | |
| jnxMplsLdpEntityStorageType | readonly | Write access is not required. | |
| jnxMplsLdpEntityRowStatus | readonly |
active(1)
|
Write access is not required, and active is the only status that needs to be supported. |
| jnxMplsFecType | readonly | Write access is not required. | |
| jnxMplsFecAddrLength | readonly | Write access is not required. | |
| jnxMplsFecAddrFamily | readonly | Write access is not required. An implementation is only required to support 'unknown(0)', and IPv4 addresses. Supporting IPv6 addresses is optional. |
|
| jnxMplsFecAddr | readonly | Write access is not required. An implementation is only required to support IPv4 and may optionally support IPv6 addresses. |
|
| jnxMplsFecStorageType | readonly | Write access is not required. | |
| jnxMplsFecRowStatus | readonly |
active(1)
|
Write access is not required, and active is the only status that needs to be supported. |
| jnxMplsLdpLspFecRowStatus | readonly |
active(1)
|
Write access is not required, and active is the only status that needs to be supported. |
| jnxMplsLdpSesPeerNextHopAddrType | An implementation is only required to support 'unknown(0)', and IPv4 addresses. Supporting IPv6 addresses is optional. |
||
| jnxMplsLdpSesPeerNextHopAddr | An implementation is only required to support IPv4 and may optionally support IPv6 addresses. |
Notifications / Traps (4)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.4.1.2636.3.36.2.0.1 |
This notification is generated when the value of
the 'jnxMplsLdpEntityInitSesThreshold' object is not zero, and the number of Session Initialization messages exceeds the value of the 'jnxMplsLdpEntityInitSesThreshold' object. |
|
.1.3.6.1.4.1.2636.3.36.2.0.2 |
If this notification is enabled to generated,
then this notification is sent when the 'jnxMplsLdpEntityPathVectorLimit' does NOT match the value of the 'jnxMplsLdpPeerPathVectorLimit' for a specific Entity. |
|
.1.3.6.1.4.1.2636.3.36.2.0.3 |
If this notification is enabled to generated,
then this notification is sent when the value of 'jnxMplsLdpSesState' enters the 'operational(5)' state. |
|
.1.3.6.1.4.1.2636.3.36.2.0.4 |
If this notification is enabled to generated,
then this notification is sent when the the value of 'jnxMplsLdpSesState' leaves the 'operational(5)' state. |