JUNIPER-ATM-COS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
37

jnxCosAtmVcTable

table
.1.3.6.1.4.1.2636.3.21.1 · 1 row entry · 1 columns
Open in standard view
Uses the juniper variant from /opt/observium/mibs/juniper.
Command help
Walk jnxCosAtmVcTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JUNIPER-ATM-COS-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JUNIPER-ATM-COS-MIB::jnxCosAtmVcTable' 
A table of ATM VCs which have COS configured.
jnxCosAtmVcEntry row .1.3.6.1.4.1.2636.3.21.1.1
This entry contains COS info specific to an ATM VC.
Each entry is indexed using ifIndex, vpi and vci of
the VC.
Indexes
Column Syntax OID
jnxCosAtmVcCosMode
The mode of COS queue priority for the VC.

strict mode :
One queue of the four queues has strict high priority and
is always serviced before the rest of the queues. The
remaining queues are serviced in ro…
Enumeration
Enumerated Values:
0strict
1alternate
 .1.3.6.1.4.1.2636.3.21.1.1.1

jnxCosAtmVcScTable

table
.1.3.6.1.4.1.2636.3.21.2 · 1 row entry · 8 columns
Open in standard view
Uses the juniper variant from /opt/observium/mibs/juniper.
Command help
Walk jnxCosAtmVcScTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JUNIPER-ATM-COS-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JUNIPER-ATM-COS-MIB::jnxCosAtmVcScTable' 
A table of rows representing atm-scheduler config
parameters for each forwarding class within a specified VC.
          
NOTE: These schedulers are specific to an atm interface and
are different from the typical schedulers specified under
class-of-service config in CLI. Hence, hereafter, through
out this mib, scheduler will be referred to as atm-scheduler
to avoid any confusion.
jnxCosAtmVcScEntry row .1.3.6.1.4.1.2636.3.21.2.1
This entry represents atm-scheduler config parameters per
forwarding class and per VC.
Indexes
Column Syntax OID
jnxCosAtmVcScPriority
The atm-scheduler priority for the queue associated with
the specified forwarding class within the specified VC.
Enumeration
Enumerated Values:
0low
1high
 .1.3.6.1.4.1.2636.3.21.2.1.1
jnxCosAtmVcScTxWeightType
The atm-scheduler transmit-weight-type for the queue
associated with the specified forwarding class inside the
specified VC.

An atm-scheduler can specify the transmit-weight-type either
as number of cells…
Enumeration
Enumerated Values:
0cells
1percent
 .1.3.6.1.4.1.2636.3.21.2.1.2
jnxCosAtmVcScTxWeight
The atm-scheduler's transmit weight for the queue
associated with the specified forwarding class and the
specified VC. This object value is either expressed in
units of cells or as a percentage of the total VC
bandwidth…
Integer32
Constraints:
range: 0-32000
 .1.3.6.1.4.1.2636.3.21.2.1.3
jnxCosAtmVcScDpType
The type of RED drop profile configured for the specified
forwarding class within the specified VC. A scheduler can
specify either linear or constant drop profile.

A constant type drop profile (aka EPD) s…
Enumeration
Enumerated Values:
0linearRed
1epd
 .1.3.6.1.4.1.2636.3.21.2.1.4
jnxCosAtmVcScLrdpQueueDepth
The maximum queue size in cells, as specified by the linear
RED drop profile associated with the specified forwarding
class within the specified VC.

This object is valid only when value of object
jnxCosAt…
Integer32
Constraints:
range: 0-32000
 .1.3.6.1.4.1.2636.3.21.2.1.5
jnxCosAtmVcScLrdpLowPlpThresh
The threshold percentage of fill-level beyond which low PLP
(Packet Loss Priority) packets belonging to the specified
forwarding class within the specified VC are randomly
dropped. This value is specified by linear RED …
Integer32
Constraints:
range: 0-32000
 .1.3.6.1.4.1.2636.3.21.2.1.6
jnxCosAtmVcScLrdpHighPlpThresh
The threshold percentage of fill-level beyond which high
PLP (Packet Loss Priority) packets belonging to the
specified forwarding class within the specified VC are
randomly dropped. This value is specified by linear RED…
Integer32
Constraints:
range: 0-32000
 .1.3.6.1.4.1.2636.3.21.2.1.7
jnxCosAtmVcEpdThreshold
If a EPD type drop profile is configured for this scheduler
and if the number of cells queued exceeds this threshold
value, all the cells in the queue are dropped.

This object has valid value only when jn…
Integer32
Constraints:
range: 0-32000
 .1.3.6.1.4.1.2636.3.21.2.1.8

jnxCosAtmVcQstatsTable

table
.1.3.6.1.4.1.2636.3.21.3 · 1 row entry · 10 columns
Open in standard view
Uses the juniper variant from /opt/observium/mibs/juniper.
Command help
Walk jnxCosAtmVcQstatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JUNIPER-ATM-COS-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JUNIPER-ATM-COS-MIB::jnxCosAtmVcQstatsTable' 
A table of per VC and per forwarding class queue stats
entries.
jnxCosAtmVcQstatsEntry row .1.3.6.1.4.1.2636.3.21.3.1
This entry contains queue stats for a specified
forwarding class and specified VC.
Indexes
Column Syntax OID
jnxCosAtmVcQstatsOutPackets
The number of packets belonging to the specified
forwarding class transmitted on the specified VC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.21.3.1.1
jnxCosAtmVcQstatsOutBytes
The number of bytes belonging to the specified forwarding
class that were transmitted on the specified VC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.21.3.1.2
jnxCosAtmVcQstatsOutRedDropPkts
The number of outgoing packets on the specified VC and
belonging to the specified forwarding class, that were
RED-dropped.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.21.3.1.3
jnxCosAtmVcQstatsOutNonRedDrops
The number of outgoing packets on the specified VC and
belonging to the specified forwarding class, that were
dropped not as a result of RED mechanism, but because of
errors in packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.21.3.1.4
jnxCosAtmVcQstatsOutLpBytes
The number of low PLP (PLP0) bytes transmitted.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.21.3.1.5
jnxCosAtmVcQstatsOutLpPkts
The number of low PLP (PLP0) packets transmitted.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.21.3.1.6
jnxCosAtmVcQstatsOutLpDropBytes
The number of low PLP (PLP0) bytes dropped at the output
queue.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.21.3.1.7
jnxCosAtmVcQstatsOutHpDropBytes
The number of high PLP (PLP1) bytes dropped at the output
queue.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.21.3.1.8
jnxCosAtmVcQstatsOutLpDropPkts
The number of low PLP (PLP0) packets dropped at the
output queue.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.21.3.1.9
jnxCosAtmVcQstatsOutHpDropPkts
The number of high PLP (PLP1) packets dropped at the
output queue.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.21.3.1.10

jnxCosAtmTrunkTable

table
.1.3.6.1.4.1.2636.3.21.4 · 1 row entry · 18 columns
Open in standard view
Uses the juniper variant from /opt/observium/mibs/juniper.
Command help
Walk jnxCosAtmTrunkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JUNIPER-ATM-COS-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JUNIPER-ATM-COS-MIB::jnxCosAtmTrunkTable' 
A table of all ATM Trunk CoS entries. Stats and configuration
information is provided for each ATM Trunk CoS interface.
jnxCosAtmTrunkEntry row .1.3.6.1.4.1.2636.3.21.4.1
A single ATM Trunk CoS Entry.
Indexes
Column Syntax OID
jnxCosAtmTrunkMode
The mode of COS queue priority for the Trunk.

strict mode :
One queue of the four queues has strict high priority and
is always serviced before the rest of the queues. The
remaining queues are serviced in…
Enumeration
Enumerated Values:
1strict
2alternate
 .1.3.6.1.4.1.2636.3.21.4.1.1
jnxCosAtmTrunkScPriority
The atm-scheduler priority for the queue associated with
the specified forwarding class within the specified Trunk.
Enumeration
Enumerated Values:
1low
2high
 .1.3.6.1.4.1.2636.3.21.4.1.2
jnxCosAtmTrunkScTxWeightType
The atm-scheduler transmit-weight-type for the queue
associated with the specified forwarding class inside the
specified Trunk.

An atm-scheduler can specify the transmit-weight-type either
as number of ce…
Enumeration
Enumerated Values:
1cells
2percent
 .1.3.6.1.4.1.2636.3.21.4.1.3
jnxCosAtmTrunkScTxWeight
The atm-scheduler's transmit weight for the queue
associated with the specified forwarding class and the
specified Trunk. This object value is either expressed in
units of cells or as a percentage of the total Trunk
ban…
Integer32
Constraints:
range: 0-32000
 .1.3.6.1.4.1.2636.3.21.4.1.4
jnxCosAtmTrunkQaType
The atm queue admission type used for the specified Trunk.
Enumeration
Enumerated Values:
1red
2singleEpd
3dualEpd
 .1.3.6.1.4.1.2636.3.21.4.1.5
jnxCosAtmTrunkEpdThresholdPlp0
If an EPD type drop profile is configured for this
scheduler and if the number of cells queued exceeds this
threshold value, all the cells which have plp equal to 0
will be dropped.

This object has vali…
Integer32
Constraints:
range: 0-32000
 .1.3.6.1.4.1.2636.3.21.4.1.6
jnxCosAtmTrunkEpdThresholdPlp1
If a EPD type drop profile is configured for this scheduler
and if the number of cells queued exceeds this threshold
value, all the cells which have plp equal to 1 will be
dropped.

This object has valid v…
Integer32
Constraints:
range: 0-32000
 .1.3.6.1.4.1.2636.3.21.4.1.7
jnxCosAtmTrunkQstatsOutPackets
The number of packets belonging to the specified
forwarding class transmitted on the specified Trunk.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.21.4.1.8
jnxCosAtmTrunkQstatsOutBytes
The number of bytes belonging to the specified forwarding
class that were transmitted on the specified Trunk.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.21.4.1.9
jnxCosAtmTrunkQstatsOutDrops
The number of outgoing packets on the specified Trunk and
belonging to the specified forwarding class, that were
dropped.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.21.4.1.10
jnxCosAtmTrunkQstatsOutLpBytes
The number of low PLP (PLP0) bytes transmitted.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.21.4.1.11
jnxCosAtmTrunkQstatsOutLpPkts
The number of low PLP (PLP0) packets transmitted.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.21.4.1.12
jnxCosAtmTrunkQstatsOutLpDropBytes
The number of low PLP (PLP0) bytes dropped at the output
queue.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.21.4.1.13
jnxCosAtmTrunkQstatsOutHpDropBytes
The number of high PLP (PLP1) bytes dropped at the output
queue.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.21.4.1.14
jnxCosAtmTrunkQstatsOutLpDropPkts
The number of low PLP (PLP0) packets dropped at the
output queue.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.21.4.1.15
jnxCosAtmTrunkQstatsOutHpDropPkts
The number of high PLP (PLP1) packets dropped at the
output queue.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.21.4.1.16
jnxCosAtmTrunkQstatsOutHpBytes
The number of high PLP (PLP1) bytes transmitted.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.21.4.1.17
jnxCosAtmTrunkQstatsOutHpPkts
The number of high PLP (PLP1) packets transmitted.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.21.4.1.18