ISKRATEL-MSAN-MIB Table View

Description.

msanSwComponentEntry row .1.3.6.1.4.1.1332.1.1.5.1.3.11.1

Description.

Indexes

msanSwComponentId

Column	Syntax	OID
msanSwComponentId Unique index of SW component.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1332.1.1.5.1.3.11.1.1
msanSwComponentName Name of software component (e.g. ES, EV, EF, EA).	OctetString	.1.3.6.1.4.1.1332.1.1.5.1.3.11.1.2
msanSwComponentSteerVersion The unique steer code for this software component.	OctetString	.1.3.6.1.4.1.1332.1.1.5.1.3.11.1.3

Description.

msanCliScriptEntry row .1.3.6.1.4.1.1332.1.1.5.3.1.6.1

Description.

Indexes

msanCliScriptName

Column	Syntax	OID
msanCliScriptName CLI script name	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.1332.1.1.5.3.1.6.1.1
msanCliScriptApply When set to enable(1) selected selected CLI script is applied.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.1332.1.1.5.3.1.6.1.2
msanCliScriptApplyStatus Status of CLI script apply request	Enumeration Enumerated Values: 1 notInitiated 2 inProcess	.1.3.6.1.4.1.1332.1.1.5.3.1.6.1.3
msanCliScriptRowStatus The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to destroy(6) will remove t…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1332.1.1.5.3.1.6.1.4

Description.

msanSwBootPackageEntry row .1.3.6.1.4.1.1332.1.1.5.3.1.9.1

Description.

Indexes

msanSwBootPackageName

Column	Syntax	OID
msanSwBootPackageName SW package name on local disk.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.1332.1.1.5.3.1.9.1.1
msanSwBootPackageStatus SW package status. You can set only nextActive(2) value. Other values are read-only.	Enumerationr/w Enumerated Values: 1 currentActive 2 nextActive 3 backup 4 none	.1.3.6.1.4.1.1332.1.1.5.3.1.9.1.2

Description.

msanVDSLProfileEntry row .1.3.6.1.4.1.1332.1.1.5.3.3.1.1

Description.

Indexes

VDSL-LINE-MIBvdslLineConfProfileName

Column	Syntax	OID
msanVDSLProfileType Profile type: - other ~ none of the following - defaut ~ default profile - local ~ local configured profile type - global ~ global configured profile type	Enumerationr/w Enumerated Values: 1 other 2 default 3 local 4 global	.1.3.6.1.4.1.1332.1.1.5.3.3.1.1.1
msanVDSL2LineProfile VDSL2 profile	Enumerationr/w Enumerated Values: 1 vdsl2profile8c 2 vdsl2profile8d 3 vdsl2profile12a 4 vdsl2profile12b 5 vdsl2profile17a	.1.3.6.1.4.1.1332.1.1.5.3.3.1.1.2

Service Profile table

msanServiceProfileEntry row .1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1

Service Profile table entry.

Indexes

msanServiceProfileName

Column	Syntax	OID
msanServiceProfileName Name for service profile.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.1
msanServiceProfileProtection If protection flag is set to protected (1), other profile values cannot be edited. Protection flag is always protected (1) and it can't be changed if profile is assigned as dynamic: msanServiceProfileSt…	Enumerationr/w Enumerated Values: 0 unprotected 1 protected	.1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.2
msanServiceProfileStatus Profile status. If status is dynamic, profile values can't be edited.	Enumeration Enumerated Values: 1 static 2 dynamic	.1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.3
msanServiceProfileServiceFlowProfileName Index of used service flow profile (this profile must be set before), which indicates row in msanServiceFlowProfileTable. Empty string indicates that parameter has not been defined.	OctetStringr/w	.1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.4
msanServiceProfileMulticastProfileName Index of used multicast profile (this profile must be set before), which indicates row in msanMulticastProfileTable. Empty string indicates that parameter has not been defined.	OctetStringr/w	.1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.5
msanServiceProfileVlanProfileName Index of used vlan profile (this profile must be set before), which indicates row in msanVlanProfileTable. Empty string indicates that parameter has not been defined.	OctetStringr/w	.1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.6
msanServiceProfileL2cpProfileName Index of used L2CP profile (this profile must be set before), which indicates row in msanL2cpProfileTable. Empty string indicates that parameter has not been defined.	OctetStringr/w	.1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.7
msanServiceProfileSecurityProfileName Index of used security profile (this profile must be set before), which indicates row in msanSecurityProfileTable. Empty string indicates that parameter has not been defined.	OctetStringr/w	.1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.8
msanServiceProfileAtmVpi Virtual Path Identifier. A value of -1 indicates that parameter has not been defined.	Integer32r/w Constraints: range: -1-255	.1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.9
msanServiceProfileAtmVci Virtual Channel Identifier. A value of -1 indicates that parameter has not been defined.	Integer32r/w Constraints: range: -1--1 range: 32-255	.1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.10
msanServiceProfileDhcpRa Dynamic Host Configuration Protocol Relay Agent. DHCP RA and PPPoE IA can not be included simultaneously.	Enumerationr/w Enumerated Values: 0 disabled 1 allowClients 2 allowServers 3 allowAll	.1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.11
msanServiceProfileDhcpRaTrustClients DHCP RA Trust Clients. Effective only if DHCP-RA is in either allow-all or allow-client mode.	Enumerationr/w Enumerated Values: 0 notTrust 1 trust	.1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.12
msanServiceProfileDhcpRaOpt82UnicastExtension DHCP RA option82 unicast extension. Effective only if DHCP-RA is in either allow-all or allow-client mode.	Enumerationr/w Enumerated Values: 0 notUsed 1 used	.1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.13
msanServiceProfileDhcpRaOpt82Insert DHCP Relay Agent Insert Option 82. Effective only if DHCP-RA is in either allow-all or allow-client mode.	Enumerationr/w Enumerated Values: 0 notInsert 1 insert	.1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.14
msanServiceProfileDhcpRaRemoteId DHCP Relay Agent Remote Identification. Effective only if DHCP-RA is in either allow-all or allow-client mode.	OctetStringr/w Constraints: range: 0-63	.1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.15
msanServiceProfileDhcpRaRateLimit Max rate for DHCP Relay Agent.	Unsigned32r/w Constraints: range: 0-1000	.1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.16
msanServiceProfilePppoeIA Point-to-Point Protocol over Ethernet Intermediate Agent. DHCP RA and PPPoE IA can not be included simultaneously.	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.17
msanServiceProfilePppoeIARateLimit Max rate for PPPoE IA.	Unsigned32r/w Constraints: range: 0-1000	.1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.18
msanServiceProfileDescription Attribute specifies text which describes the associated object.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.19
msanServiceProfileRowStatus The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. For row creation use createAndWait(5). Value ac…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1332.1.1.5.3.3.2.1.1.20

A connection between service profiles and device ports

msanServicePortProfileEntry row .1.3.6.1.4.1.1332.1.1.5.3.3.2.2.1

Service Profile Port table entry.

Indexes

IF-MIBifIndex msanServiceProfileName

Column	Syntax	OID
msanServicePortProfileRowStatus The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAndGo(4) creates a…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1332.1.1.5.3.3.2.2.1.1

Service Flow Profile table

msanServiceFlowProfileEntry row .1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1

Service Flow Profile table entry.

Indexes

msanServiceFlowProfileName

Column	Syntax	OID
msanServiceFlowProfileName Service Flow Profile Name.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.1
msanServiceFlowProfileProtection If protection flag is set to protected (1), other profile values cannot be edited. Protection flag is always protected (1) and it can't be changed if profile is assigned as dynamic: msanServiceFlowProfi…	Enumerationr/w Enumerated Values: 0 unprotected 1 protected	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.2
msanServiceFlowProfileStatus Profile status. If status is dynamic, profile values can't be edited.	Enumeration Enumerated Values: 1 static 2 dynamic	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.3
msanServiceFlowProfileMatchUsAny Match every upstream packet frame.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.4
msanServiceFlowProfileMatchUsMacDestAddr Match upstream packet frame with specified destination MAC address. Empty string indicates that parameter has not been defined	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.5
msanServiceFlowProfileMatchUsMacDestMask This mask value identifies the portion of msanServiceFlowProfileMatchUsMacDestAddr that is compared with upstream packet. Empty string indicates that parameter has not been defined	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.6
msanServiceFlowProfileMatchUsMacSrcAddr Match upstream packet frame with specified source MAC address. Empty string indicates that parameter has not been defined	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.7
msanServiceFlowProfileMatchUsMacSrcMask This mask value identifies the portion of msanServiceFlowProfileMatchUsMacSrcAddr that is compared with upstream packet. Empty string indicates that parameter has not been defined	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.8
msanServiceFlowProfileMatchUsCPcp Match upstream packet frame with specified Customer PCP (Priority Code Point) - PCP is also known as class of service (CoS) bits. A value of -1 indicates that parameter has not been defined.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.9
msanServiceFlowProfileMatchUsSPcp Match upstream packet frame with specified Service PCP (Priority Code Point). PCP is also known as class of service (CoS) bits. A value of -1 indicates that parameter has not been defined.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.10
msanServiceFlowProfileMatchUsVlanProfile Match upstream packet frame with VLAN Id values from VLAN Service Profile (msanVlanProfileTable).	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.11
msanServiceFlowProfileMatchUsCVlanIdRange Match upstream packet frame with specified list (bitmask) of Customer VLAN Id. An empty string indicates that parameter has not been defined.	OctetStringr/w Constraints: range: 0-512	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.12
msanServiceFlowProfileMatchUsSVlanIdRange Match upstream packet frame with specified list (bitmask) of Service VLAN Id. An empty string indicates that parameter has not been defined.	OctetStringr/w Constraints: range: 0-512	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.13
msanServiceFlowProfileMatchUsEthertype Match upstream packet frame with specified EtherType value. A value of -1 indicates that parameter has not been defined.	Integer32r/w Constraints: range: -1-65535	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.14
msanServiceFlowProfileMatchUsIpProtocol Match upstream packet frame with specified IP protocol value. A value of -1 indicates that parameter has not been defined. Some of standard protocol values: icmp - 1 igmp - 2 ip - 4 (ip in ip encapsulation) …	Integer32r/w Constraints: range: -1-255	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.15
msanServiceFlowProfileMatchUsIpSrcAddr Match upstream packet frame with specified source IP address. Empty string indicates that parameter has not been defined.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.16
msanServiceFlowProfileMatchUsIpSrcMask This mask value identifies the portion of msanServiceFlowProfileMatchUsIpSrcAddr that is compared with upstream packet. Empty string indicates that parameter has not been defined	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.17
msanServiceFlowProfileMatchUsIpDestAddr Match upstream packet frame with specified destination IP address. Empty string indicates that parameter has not been defined.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.18
msanServiceFlowProfileMatchUsIpDestMask This mask value identifies the portion of msanServiceFlowProfileMatchUsIpDestAddr that is compared with upstream packet. Empty string indicates that parameter has not been defined	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.19
msanServiceFlowProfileMatchUsIpDscp Match upstream packet frame with specified CSC (Class Selector Code Point) = IP precedence (part of TOS field) value. A value of -1 indicates that parameter has not been defined.	Integer32r/w Constraints: range: -1-63	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.20
msanServiceFlowProfileMatchUsIpCsc Match upstream packet frame with specified IP precedence (part of TOS field) value. A value of -1 indicates that parameter has not been defined.	Integer32r/w Constraints: range: -1-7	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.21
msanServiceFlowProfileMatchUsIpDropPrecedence Match upstream packet frame with specified Drop precedence two bits value: noDrop(0) -> 00 lowDrop(1) -> 01 mediumDrop(2) -> 10 highDrop(3) -> 11 A value of -1 indicates that…	Enumerationr/w Enumerated Values: -1 notDefined 0 noDrop 1 lowDrop 2 mediumDrop 3 highDrop	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.22
msanServiceFlowProfileMatchUsTcpSrcPort Match upstream packet frame with specified source TCP port number. A value of -1 indicates that parameter has not been defined.	Integer32r/w Constraints: range: -1-65535	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.23
msanServiceFlowProfileMatchUsTcpDestPort Match upstream packet frame with specified destination TCP port number. A value of -1 indicates that parameter has not been defined.	Integer32r/w Constraints: range: -1-65535	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.24
msanServiceFlowProfileMatchUsUdpSrcPort Match upstream packet frame with specified source UDP port number. A value of -1 indicates that parameter has not been defined.	Integer32r/w Constraints: range: -1-65535	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.25
msanServiceFlowProfileMatchUsUdpDstPort Match upstream packet frame with specified destination UDP port number. A value of -1 indicates that parameter has not been defined.	Integer32r/w Constraints: range: -1-65535	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.26
msanServiceFlowProfileMatchDsAny Match every downstream packet frame.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.27
msanServiceFlowProfileMatchDsMacDestAddr Match downstream packet frame with specified destination MAC address. Empty string indicates that parameter has not been defined	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.28
msanServiceFlowProfileMatchDsMacDestMask This mask value identifies the portion of msanServiceFlowProfileMatchDsMacDestAddr that is compared with downstream packet. Empty string indicates that parameter has not been defined	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.29
msanServiceFlowProfileMatchDsMacSrcAddr Match downstream packet frame with specified source MAC address. Empty string indicates that parameter has not been defined	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.30
msanServiceFlowProfileMatchDsMacSrcMask This mask value identifies the portion of msanServiceFlowProfileMatchDsMacSrcAddr that is compared with downstream packet. Empty string indicates that parameter has not been defined	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.31
msanServiceFlowProfileMatchDsCPcp Match downstream packet frame with specified Customer PCP (Priority Code Point) - PCP is also known as class of service (CoS) bits. A value of -1 indicates that parameter has not been defined.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.32
msanServiceFlowProfileMatchDsSPcp Match downstream packet frame with specified Service PCP (Priority Code Point). PCP is also known as class of service (CoS) bits. A value of -1 indicates that parameter has not been defined.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.33
msanServiceFlowProfileMatchDsVlanProfile Match downstream packet frame with VLAN Id values from VLAN Service Profile (msanVlanProfileTable).	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.34
msanServiceFlowProfileMatchDsCVlanIdRange Match downstream packet frame with specified list (bitmask) of Customer VLAN Id. An emptya string indicates that parameter has not been defined.	OctetStringr/w Constraints: range: 0-512	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.35
msanServiceFlowProfileMatchDsSVlanIdRange Match downstream packet frame with specified list (bitmask) of Service VLAN Id. An empty string indicates that parameter has not been defined.	OctetStringr/w Constraints: range: 0-512	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.36
msanServiceFlowProfileMatchDsEthertype Match downstream packet frame with specified EtherType value. A value of -1 indicates that parameter has not been defined.	Integer32r/w Constraints: range: -1-65535	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.37
msanServiceFlowProfileMatchDsIpProtocol Match downstream packet frame with specified IP protocol value. A value of -1 indicates that parameter has not been defined. Some of standard protocol values: icmp - 1 igmp - 2 ip - 4 (ip in ip encapsulation) …	Integer32r/w Constraints: range: -1-255	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.38
msanServiceFlowProfileMatchDsIpSrcAddr Match downstream packet frame with specified source IP address. Empty string indicates that parameter has not been defined.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.39
msanServiceFlowProfileMatchDsIpSrcMask This mask value identifies the portion of msanServiceFlowProfileMatchDsIpSrcAddr that is compared with downstream packet. Empty string indicates that parameter has not been defined	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.40
msanServiceFlowProfileMatchDsIpDestAddr Match downstream packet frame with specified destination IP address. Empty string indicates that parameter has not been defined.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.41
msanServiceFlowProfileMatchDsIpDestMask This mask value identifies the portion of msanServiceFlowProfileMatchDsIpDestAddr that is compared with downstream packet. Empty string indicates that parameter has not been defined	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.42
msanServiceFlowProfileMatchDsIpDscp Match downstream packet frame with specified IP DSCP value. A value of -1 indicates that parameter has not been defined.	Integer32r/w Constraints: range: -1-63	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.43
msanServiceFlowProfileMatchDsIpCsc Match downstream packet frame with specified CSC (Class Selector Code Point) = IP precedence (part of TOS field) value. A value of -1 indicates that parameter has not been defined.	Integer32r/w Constraints: range: -1-7	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.44
msanServiceFlowProfileMatchDsIpDropPrecedence Match downstream packet frame with specified Drop precedence two bits value: noDrop(0) -> 00 lowDrop(1) -> 01 mediumDrop(2) -> 10 highDrop(3) -> 11 A value of -1 indicates th…	Enumerationr/w Enumerated Values: -1 notDefined 0 noDrop 1 lowDrop 2 mediumDrop 3 highDrop	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.45
msanServiceFlowProfileMatchDsTcpSrcPort Match downstream packet frame with specified source TCP port number. A value of -1 indicates that parameter has not been defined.	Integer32r/w Constraints: range: -1-65535	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.46
msanServiceFlowProfileMatchDsTcpDestPort Match downstream packet frame with specified destination TCP port number. A value of -1 indicates that parameter has not been defined.	Integer32r/w Constraints: range: -1-65535	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.47
msanServiceFlowProfileMatchDsUdpSrcPort Match downstream packet frame with specified source UDP port number. A value of -1 indicates that parameter has not been defined.	Integer32r/w Constraints: range: -1-65535	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.48
msanServiceFlowProfileMatchDsUdpDstPort Match downstream packet frame with specified destination UDP port number. A value of -1 indicates that parameter has not been defined.	Integer32r/w Constraints: range: -1-65535	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.49
msanServiceFlowProfileUsCdr Upstream committed data rate (E-CDR) in kbps (0 ? 1000000).	kbpsInteger32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.50
msanServiceFlowProfileUsCdrBurstSize Upstream committed data rate burst size in kB (0 ? 16384). When parameter is set to 0 (default), it's automatically updated to default burst size in according with current msanQoSProfileInCdr value.	kBInteger32r/w Constraints: range: 0-16384	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.51
msanServiceFlowProfileUsPdr Upstream peak data rate (E-PDR) in kbps (0 ? 1000000).	kbpsInteger32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.52
msanServiceFlowProfileUsPdrBurstSize Upstream peak data rate burst size in kB (0 ? 16384). When parameter is set to 0 (default), it's automatically updated to default burst size in according with current msanQoSProfileInPdr value.	kBInteger32r/w Constraints: range: 0-16384	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.53
msanServiceFlowProfileUsMarkPcp Type of upstrem PCP marking. If set to userValue(3), parameter msanServiceFlowProfileUsMarkPcpValue is used. A value of none(1) indicates that parameter has not been defined	Enumerationr/w Enumerated Values: 1 none 2 copyFromCsc 3 userValue	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.54
msanServiceFlowProfileUsMarkPcpValue Mark upstream packets with specified PCP (Priority Code Point) value (0-7) = CoS. A value of -1 indicates that parameter has not been defined	Integer32r/w Constraints: range: -1-7	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.55
msanServiceFlowProfileUsMarkDscp Type of upstrem DSCP marking. If set to userValue(3), parameter msanServiceFlowProfileUsMarkDscpValue is used. A value of none(1) indicates that parameter has not been defined	Enumerationr/w Enumerated Values: 1 none 2 copyFromPcp 3 userValue	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.56
msanServiceFlowProfileUsMarkDscpValue Mark upstream packets with specified DSCP (Diffserv Code Point) value (0-63). A value of -1 indicates that parameter has not been defined	Integer32r/w Constraints: range: -1-63	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.57
msanServiceFlowProfileDsCdr Downstream committed data rate (E-CDR) in kbps (0 ? 1000000).	kbpsInteger32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.58
msanServiceFlowProfileDsCdrBurstSize Downstream committed data rate burst size in kB (0 ? 16384). When parameter is set to 0 (default), it's automatically updated to default burst size in according with current msanQoSProfileOutCdr value.	kBInteger32r/w Constraints: range: 0-16384	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.59
msanServiceFlowProfileDsPdr Downstream peak data rate (E-PDR) in kbps (0 ? 1000000).	kbpsInteger32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.60
msanServiceFlowProfileDsPdrBurstSize Downstream peak data rate burst size in kB (0 ? 16384). When parameter is set to 0 (default), it's automatically updated to default burst size in according with current msanQoSProfileOutCdr value.	kBInteger32r/w Constraints: range: 0-16384	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.61
msanServiceFlowProfileDsMarkPcp Type of downstream PCP marking. If set to userValue(3), parameter msanServiceFlowProfileDsMarkPcpValue is used. A value of none(1) indicates that parameter has not been defined	Enumerationr/w Enumerated Values: 1 none 2 copyFromCsc 3 userValue	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.62
msanServiceFlowProfileDsMarkPcpValue Mark downstream packets with specified PCP (Priority Code Point) value (0-7) = CoS. A value of -1 indicates that parameter has not been defined	Integer32r/w Constraints: range: -1-7	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.63
msanServiceFlowProfileDsMarkDscp Type of downstrem DSCP marking. If set to userValue(3), parameter msanServiceFlowProfileDsMarkDscpValue is used. A value of none(1) indicates that parameter has not been defined	Enumerationr/w Enumerated Values: 1 none 2 copyFromPcp 3 userValue	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.64
msanServiceFlowProfileDsMarkDscpValue Mark downstream packets with specified DSCP (Diffserv Code Point) value (0-63). A value of -1 indicates that parameter has not been defined	Integer32r/w Constraints: range: -1-63	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.65
msanServiceFlowProfileDsQueuingPriority Queuing Priority of Service Flow Profile.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.66
msanServiceFlowProfileDsSchedulingMode Scheduling Mode	Enumerationr/w Enumerated Values: 1 weighted 2 strict	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.67
msanServiceFlowProfileDescription Attribute specifies text which describes the associated object.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.68
msanServiceFlowProfileRowStatus The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAndGo(4) creates a…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1332.1.1.5.3.3.3.1.1.69

Vlan Profile table

msanVlanProfileEntry row .1.3.6.1.4.1.1332.1.1.5.3.3.4.1.1

Vlan Profile table entry.

Indexes

msanVlanProfileName

Column	Syntax	OID
msanVlanProfileName Name for the VLAN profile.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.1332.1.1.5.3.3.4.1.1.1
msanVlanProfileProtection If protection flag is set to protected (1), other profile values cannot be edited. Protection flag is always protected (1) and it can't be changed if profile is assigned as dynamic: msanVlanProfileStatu…	Enumerationr/w Enumerated Values: 0 unprotected 1 protected	.1.3.6.1.4.1.1332.1.1.5.3.3.4.1.1.2
msanVlanProfileStatus Profile status. If status is dynamic, profile values can't be edited.	Enumeration Enumerated Values: 1 static 2 dynamic	.1.3.6.1.4.1.1332.1.1.5.3.3.4.1.1.3
msanVlanProfileCVid Customer VLANs Identification (bit mask).	OctetStringr/w Constraints: range: 0-512	.1.3.6.1.4.1.1332.1.1.5.3.3.4.1.1.4
msanVlanProfileCVidNative Nativ C-VLAN Id. A value of -1 indicates that parameter has not been defined.	Integer32r/w Constraints: range: -1-4094	.1.3.6.1.4.1.1332.1.1.5.3.3.4.1.1.5
msanVlanProfileCVidRemark Remark C-VLAN Id. A value of -1 indicates that parameter has not been defined.	Integer32r/w Constraints: range: -1-4094	.1.3.6.1.4.1.1332.1.1.5.3.3.4.1.1.6
msanVlanProfileSVid S-VLAN Id. A value of -1 indicates that parameter has not been defined.	Integer32r/w Constraints: range: -1-4094	.1.3.6.1.4.1.1332.1.1.5.3.3.4.1.1.7
msanVlanProfileSEtherType Ether Type value.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1332.1.1.5.3.3.4.1.1.8
msanVlanProfileDescription Attribute specifies text which describes the associated object.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.1332.1.1.5.3.3.4.1.1.10
msanVlanProfileRowStatus The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAndGo(4) creates a…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1332.1.1.5.3.3.4.1.1.11
msanVlanProfileNetworkPortCTag Usage of C-VLAN tag on network port. If assigned as notUse(2) in upstream direction, C-VLAN tag is removed.	Enumerationr/w Enumerated Values: 1 use 2 notUse	.1.3.6.1.4.1.1332.1.1.5.3.3.4.1.1.12

A connection between VLAN profiles and device ports

msanVlanPortProfileEntry row .1.3.6.1.4.1.1332.1.1.5.3.3.4.2.1

Service Profile Port table entry.

Indexes

IF-MIBifIndex msanVlanProfileName

Column	Syntax	OID
msanVlanPortProfileRowStatus The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAndGo(4) creates a…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1332.1.1.5.3.3.4.2.1.1

Multicast Profile table

msanMulticastProfileEntry row .1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1

Multicast Profile table entry.

Indexes

msanMulticastProfileName

Column	Syntax	OID
msanMulticastProfileName Name for the Multicast profile.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1.1
msanMulticastProfileProtection If protection flag is set to protected (1), other profile values cannot be edited. Protection flag is always protected (1) and it can't be changed if profile is assigned as dynamic: msanMulticastProfile…	Enumerationr/w Enumerated Values: 0 unprotected 1 protected	.1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1.2
msanMulticastProfileStatus Profile status. If status is dynamic, profile values can't be edited.	Enumeration Enumerated Values: 1 static 2 dynamic	.1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1.3
msanMulticastProfileIgmpSnooping IGMP snnoping	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1.4
msanMulticastProfileIgmpSnoopingFastLeave IGMP Snooping Fast Leave.	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1.5
msanMulticastProfileIgmpSnoopingSuppression IGMP Snooping Suppression.	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1.6
msanMulticastProfileIgmpProxy IGMP proxy.	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1.7
msanMulticastProfileIgmpProxyIpAddress IGMP proxy IP address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1.8
msanMulticastProfileIgmpFiltering IGMP filtering.	Enumerationr/w Enumerated Values: 0 allowAll 1 allowReports 2 allowQueries 3 dropAll	.1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1.9
msanMulticastProfileMulticastGroupLimit Multicast group limit. A value of 0 indicates not limit.	Unsigned32r/w Constraints: range: 0-10	.1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1.10
msanMulticastProfileMvr Multicast VLAN Registration.	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1.11
msanMulticastProfileDescription Attribute specifies text which describes the associated object.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1.12
msanMulticastProfileRowStatus The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAndGo(4) creates a…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1332.1.1.5.3.3.5.1.1.13

Connection between 
multicast_profile and multicast_static_group table

msanMulticastProfileStaticGroupEntry row .1.3.6.1.4.1.1332.1.1.5.3.3.5.2.1

Multicast Profile Group table entry.

Indexes

msanMulticastProfileName msanMulticastProfileStaticGroupIpAddr

Column	Syntax	OID
msanMulticastProfileStaticGroupIpAddr Description.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1332.1.1.5.3.3.5.2.1.1
msanMulticastProfileStaticGroupRowStatus The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAndGo(4) creates a…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1332.1.1.5.3.3.5.2.1.9

Security Profile table

msanSecurityProfileEntry row .1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1

Security Profile table entry.

Indexes

msanSecurityProfileName

Column	Syntax	OID
msanSecurityProfileName Name of the security profile.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.1
msanSecurityProfileProtection If protection flag is set to protected (1), other profile values cannot be edited. Protection flag is always protected (1) and it can't be changed if profile is assigned as dynamic: msanSecurityProfileS…	Enumerationr/w Enumerated Values: 0 unprotected 1 protected	.1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.2
msanSecurityProfileStatus Profile status. If status is dynamic, profile values can't be edited.	Enumeration Enumerated Values: 1 static 2 dynamic	.1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.3
msanSecurityProfileProtectedPort Security profile protected port	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.4
msanSecurityProfileMacSg Mac source guard	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.5
msanSecurityProfileMacLimit MAC limit A value of 0 indicates that parameter has not been defined.	Unsigned32r/w Constraints: range: 0-64	.1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.6
msanSecurityProfilePortSecurity Port security	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.7
msanSecurityProfileIpSg IP source guard	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.8
msanSecurityProfileIpSgBindingLimit IP source guard binding limit.	Unsigned32r/w Constraints: range: 1-15	.1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.9
msanSecurityProfileIpSgFilteringMode IP source guard filtering mode	Enumerationr/w Enumerated Values: 1 ipSourceAddress 2 ipAndMacSourceAddress	.1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.10
msanSecurityProfileArpInspec Dynamic ARP inspection	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.12
msanSecurityProfileMacForward MAC forwarding	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.13
msanSecurityProfileDescription Attribute specifies text which describes the associated object.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.14
msanSecurityProfileRowStatus The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAndGo(4) creates a…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1332.1.1.5.3.3.6.1.1.15

A connection between security profiles and access lists

msanSecurityAclProfileEntry row .1.3.6.1.4.1.1332.1.1.5.3.3.6.3.1

Service Profile Port table entry.

Indexes

msanSecurityProfileName msanSecurityAclProfileAclDirection msanSecurityAclProfileSequence msanSecurityAclProfileAclType msanSecurityAclProfileAclId

Column	Syntax	OID
msanSecurityAclProfileAclDirection The direction to which this ACL instance applies.	Enumeration Enumerated Values: 1 inbound 2 outbound	.1.3.6.1.4.1.1332.1.1.5.3.3.6.3.1.1
msanSecurityAclProfileSequence The relative evaluation sequence of this ACL for this interface and direction. When multiple ACLs are allowed for a given interface and direction, the sequence number determines the order in which the list of ACLs ar…	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.1332.1.1.5.3.3.6.3.1.2
msanSecurityAclProfileAclType The type of this ACL, which is used to interpret the aclIfId object value.	Enumeration Enumerated Values: 1 ip 2 mac	.1.3.6.1.4.1.1332.1.1.5.3.3.6.3.1.3
msanSecurityAclProfileAclId The ACL identifier value. For the IP ACLs, the actual ACL number is its identifier as follows: IP standard ranges from 1-99, IP extended ranges from 100-199, and IP advanced ranges 200-299.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1332.1.1.5.3.3.6.3.1.4
msanSecurityAclProfileRowStatus The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAndGo(4) creates a…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1332.1.1.5.3.3.6.3.1.5

L2CP (Layer 2 Control Protocol) Profile table

msanL2cpProfileEntry row .1.3.6.1.4.1.1332.1.1.5.3.3.7.1.1

L2cp Profile table entry.

Indexes

msanL2cpProfileName

Column	Syntax	OID
msanL2cpProfileName Name of the L2CP profile.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.1332.1.1.5.3.3.7.1.1.1
msanL2cpProfileProtection If protection flag is set to protected (1), other profile values cannot be edited. Protection flag is always protected (1) and it can't be changed if profile is assigned as dynamic: msanL2cpProfileStatu…	Enumerationr/w Enumerated Values: 0 unprotected 1 protected	.1.3.6.1.4.1.1332.1.1.5.3.3.7.1.1.2
msanL2cpProfileStatus Profile status. If status is dynamic, profile values can't be edited.	Enumeration Enumerated Values: 1 static 2 dynamic	.1.3.6.1.4.1.1332.1.1.5.3.3.7.1.1.3
msanL2cpProfileDescription Attribute specifies text which describes the associated object.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.1332.1.1.5.3.3.7.1.1.4
msanL2cpProfileRowStatus The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAndGo(4) creates a…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1332.1.1.5.3.3.7.1.1.5

Table with list of L2CP protocols

msanL2cpProtocolEntry row .1.3.6.1.4.1.1332.1.1.5.3.3.7.2.1

Description.

Indexes

msanL2cpProtocolName

Column	Syntax	OID
msanL2cpProtocolName L2CP protocol name	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.1332.1.1.5.3.3.7.2.1.1
msanL2cpProtocolMacDestAddr MAC destination address of L2CP protocol. Empty string indicates that protocol is related to any MAC address.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.1332.1.1.5.3.3.7.2.1.2
msanL2cpProtocolEthertype L2CP protocol Ethertype. A value of -1 indicates that parameter has not been defined.	Integer32r/w Constraints: range: -1-65535	.1.3.6.1.4.1.1332.1.1.5.3.3.7.2.1.3
msanL2cpProtocolSubtype L2CP protocol subtype. A value of -1 indicates that parameter has not been defined.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1332.1.1.5.3.3.7.2.1.4
msanL2cpProtocolRowStatus The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. For row creation use createAndWait(5). Value ac…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1332.1.1.5.3.3.7.2.1.5

Table with connection between profiles and protocols

msanL2cpProfileProtocolEntry row .1.3.6.1.4.1.1332.1.1.5.3.3.7.3.1

Description.

Indexes

msanL2cpProfileName msanL2cpProtocolName

Column	Syntax	OID
msanL2cpProfileProtocolRule L2CP protocol rule.	Enumerationr/w Enumerated Values: 1 discard 2 peer 3 tunnel	.1.3.6.1.4.1.1332.1.1.5.3.3.7.3.1.1
msanL2cpProfileProtocolRowStatus The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. For row creation use createAndWait(5). Value ac…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1332.1.1.5.3.3.7.3.1.2

Table is used for connecting l2cp profile with vlan_id.

msanL2cpProfileVlanEntry row .1.3.6.1.4.1.1332.1.1.5.3.3.7.4.1

Description.

Indexes

msanL2cpProfileName Q-BRIDGE-MIBdot1qVlanIndex

Column	Syntax	OID
msanL2cpProfileVlanRowStatus The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAndGo(4) creates a…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1332.1.1.5.3.3.7.4.1.1

Description.

msanXdsl2LineConfTemplateEntry row .1.3.6.1.4.1.1332.1.1.5.3.3.8.1.1

Description.

Indexes

No indexes recorded

Column	Syntax	OID
msanXdsl2LineConfTempProtection If protection flag is set to protected (1), other profile values cannot be edited. Protection flag is always protected (1) and it can't be changed if profile is assigned as dynamic: msanAclProfileStatus…	Enumerationr/w Enumerated Values: 0 unprotected 1 protected	.1.3.6.1.4.1.1332.1.1.5.3.3.8.1.1.1
msanXdsl2LineConfTempStatus Profile status. If status is dynamic, profile values can't be edited.	Enumeration Enumerated Values: 1 static 2 dynamic	.1.3.6.1.4.1.1332.1.1.5.3.3.8.1.1.2

Description.

msanXdsl2LineAlarmConfTemplateEntry row .1.3.6.1.4.1.1332.1.1.5.3.3.8.2.1

Description.

Indexes

No indexes recorded

Column	Syntax	OID
msanXdsl2LineAlarmConfTempProtection If protection flag is set to protected (1), other profile values cannot be edited. Protection flag is always protected (1) and it can't be changed if profile is assigned as dynamic: msanAclProfileStatus…	Enumerationr/w Enumerated Values: 0 unprotected 1 protected	.1.3.6.1.4.1.1332.1.1.5.3.3.8.2.1.1
msanXdsl2LineAlarmConfTempStatus Profile status. If status is dynamic, profile values can't be edited.	Enumeration Enumerated Values: 1 static 2 dynamic	.1.3.6.1.4.1.1332.1.1.5.3.3.8.2.1.2

Table od DHCP RA parameters per port.

msanDhcpRaPortConfigEntry row .1.3.6.1.4.1.1332.1.1.5.3.4.2.1

Description.

Indexes

IF-MIBifIndex

Column	Syntax	OID
msanDhcpRaPortState State of DHCP Relay Agent on the port (enable, disable, enable-client, enable-server)	Enumerationr/w Enumerated Values: 1 enable 2 enableCli 3 enableSrv 4 disable	.1.3.6.1.4.1.1332.1.1.5.3.4.2.1.1
msanDhcpRaPortCircuitId Option 82 Circuit Id for the port.	OctetString	.1.3.6.1.4.1.1332.1.1.5.3.4.2.1.2
msanDhcpRaPortRemoteId Option 82 Remote Id for the port.	OctetStringr/w	.1.3.6.1.4.1.1332.1.1.5.3.4.2.1.3
msanDhcpRaPortMeter Enable or disable DHCP metering on port.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.1332.1.1.5.3.4.2.1.4
msanDhcpRaPortMaxDataRate Allowed throughput of incoming DHCP traffic on a port (kb/s)	kb/sSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1332.1.1.5.3.4.2.1.5
msanDhcpRaPortCircuitType Specifies DHCP RA Circuit type per port as trusted(1) or untrusted(2).	Enumerationr/w Enumerated Values: 1 trusted 2 untrusted 3 notConfigured	.1.3.6.1.4.1.1332.1.1.5.3.4.2.1.6
msanDhcpRaPortOpt82 Specifies DHCP Relay Agent option 82 insertion status per port.	Enumerationr/w Enumerated Values: 1 enable 2 disable 3 notConfigured	.1.3.6.1.4.1.1332.1.1.5.3.4.2.1.7
msanDhcpRaPortOpt82ReplyMode Specifies DHCP Relay Agent keep/remove option 82 in replies per port.	Enumerationr/w Enumerated Values: 1 keep 2 remove 3 notConfigured	.1.3.6.1.4.1.1332.1.1.5.3.4.2.1.8
msanDhcpRaPortOpt82UnicastExtStatus The desired state of insertion of option 82 in unicast frames per port.	Enumerationr/w Enumerated Values: 1 enable 2 disable 3 notConfigured	.1.3.6.1.4.1.1332.1.1.5.3.4.2.1.9
msanDhcpRaPortCircuitIdType Circuit Id syntax mode per port.	Enumerationr/w Enumerated Values: 1 iskratel 2 standard	.1.3.6.1.4.1.1332.1.1.5.3.4.2.1.10

Description.

msanDhcpRaFullModeVlanEntry row .1.3.6.1.4.1.1332.1.1.5.3.4.3.1

Description.

Indexes

msanDhcpRaFullModeVlanId msanDhcpRaFullModeVlanSrvIpAddr

Column	Syntax	OID
msanDhcpRaFullModeVlanId The VLAN identifier (refers to dot1qVlanIndex) where DHCP Client resides.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.1332.1.1.5.3.4.3.1.1
msanDhcpRaFullModeVlanSrvIpAddr The IP address of DHCP Server for specified VLAN.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1332.1.1.5.3.4.3.1.2
msanDhcpRaFullModeVlanRowStatus The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAndGo(4) creates a …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1332.1.1.5.3.4.3.1.3

Description.

msanDhcpRaStatEntry row .1.3.6.1.4.1.1332.1.1.5.3.4.5.1

Description.

Indexes

IF-MIBifIndex

Column	Syntax	OID
msanDhcpRaStatDiscover Number of received DHCP DISCOVER packets.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1332.1.1.5.3.4.5.1.1
msanDhcpRaStatRequest Number of received DHCP REQUEST packets.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1332.1.1.5.3.4.5.1.2
msanDhcpRaStatOffer Number of received DHCP OFFER packets.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1332.1.1.5.3.4.5.1.3
msanDhcpRaStatACK Number of received DHCP ACKNOWLAGE (ACK) packets.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1332.1.1.5.3.4.5.1.4
msanDhcpRaStatNAK Number of received DHCP NOT ACKNOWLAGE (NAK) packets.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1332.1.1.5.3.4.5.1.5
msanDhcpRaStatDecline Number of received DHCP DECLINE packets.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1332.1.1.5.3.4.5.1.6
msanDhcpRaStatMaxPacketSizeExceeded Number of received DHCP packets with max. packet size exceeded.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1332.1.1.5.3.4.5.1.7
msanDhcpRaStatFrameErr Number of received DHCP packets with errors in frames.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1332.1.1.5.3.4.5.1.8
msanDhcpRaStatOpt82Present Number of received DHCP packets with Option 82 or giaddr present.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1332.1.1.5.3.4.5.1.9
msanDhcpRaStatFrameUnsync Number of received packets with frames not synchronized with state machines.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1332.1.1.5.3.4.5.1.10
msanDhcpRaStatRelease Number of received DHCP RELEASE packets.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1332.1.1.5.3.4.5.1.11
msanDhcpRaStatInform Number of received DHCP INFORM packets.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1332.1.1.5.3.4.5.1.12

Table od DHCP RA parameters per Vlan.

msanDhcpRaVlanConfigEntry row .1.3.6.1.4.1.1332.1.1.5.3.4.6.1

Description.

Indexes

Q-BRIDGE-MIBdot1qVlanIndex

Column	Syntax	OID
msanDhcpRaVlanState DHCP RA state for specified VLAN ID. Value notConfigured(2) means, that global setting is used(msanDhcpRaStatus).	Enumerationr/w Enumerated Values: 1 disable 2 notConfigured	.1.3.6.1.4.1.1332.1.1.5.3.4.6.1.1
msanDhcpRaVlanMode DHCP RA mode for specified VLAN ID. Value notConfigured(1) means, that global setting is used(msanDhcpRaMode).	Enumerationr/w Enumerated Values: 1 full 2 simplified 3 notConfigured	.1.3.6.1.4.1.1332.1.1.5.3.4.6.1.2
msanDhcpRaVlanOpt82 Specifies DHCP Relay Agent option 82 insertion status per vlan.	Enumerationr/w Enumerated Values: 1 enable 2 disable 3 notConfigured	.1.3.6.1.4.1.1332.1.1.5.3.4.6.1.3
msanDhcpRaVlanOpt82ReplyMode Specifies DHCP Relay Agent keep/remove option 82 in replies per vlan.	Enumerationr/w Enumerated Values: 1 keep 2 remove 3 notConfigured	.1.3.6.1.4.1.1332.1.1.5.3.4.6.1.4
msanDhcpRaVlanOpt82UnicastExtStatus The desired state of insertion of option 82 in unicast frames per vlan.	Enumerationr/w Enumerated Values: 1 enable 2 disable 3 notConfigured	.1.3.6.1.4.1.1332.1.1.5.3.4.6.1.5
msanDhcpRaVlanCircuitIdType Circuit Id syntax mode per vlan.	Enumerationr/w Enumerated Values: 1 iskratel 2 standard 3 notConfigured	.1.3.6.1.4.1.1332.1.1.5.3.4.6.1.6

Description.

msanDhcpRaPortVlanConfigEntry row .1.3.6.1.4.1.1332.1.1.5.3.4.7.1

Description.

Indexes

IF-MIBifIndex Q-BRIDGE-MIBdot1qVlanIndex

Column	Syntax	OID
msanDhcpRaPortVlanRemoteId The VLAN identifier (refers to dot1qVlanIndex) where DHCP Client resides.	OctetStringr/w	.1.3.6.1.4.1.1332.1.1.5.3.4.7.1.1
msanDhcpRaPortVlanConfigRowStatus The row status object controls the creation/deletion of rows in this table. For row creation use createAndWait(5) [createAndGo(4) is not supported].	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1332.1.1.5.3.4.7.1.2

Description.

msanDhcpv6RaPortStatEntry row .1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1

Description.

Indexes

IF-MIBifIndex

Column	Syntax	OID
msanDhcpv6PortRaStatSolicit Number of received DHCPv6 solicit packets.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.1
msanDhcpv6PortRaStatAdvertise Number of received DHCPv6 advertise packets.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.2
msanDhcpv6PortRaStatRequest Number of received DHCPv6 request packets.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.3
msanDhcpv6PortRaStatReply Number of received DHCPv6 reply packets.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.4
msanDhcpv6PortRaStatRenew Number of received DHCPv6 renew packets.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.5
msanDhcpv6PortRaStatRebind Number of received DHCPv6 rebind packets.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.6
msanDhcpv6PortRaStatDecline Number of received DHCPv6 decline packets.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.7
msanDhcpv6PortRaStatReconfigure Number of received DHCPv6 reconfigure packets.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.8
msanDhcpv6PortRaStatRelease Number of received DHCPv6 release packets.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.9
msanDhcpv6PortRaStatInformRequest Number of received DHCPv6 inform request packets.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.10
msanDhcpv6PortRaStatRelayForward Number of received DHCPv6 relay forward packets.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.11
msanDhcpv6PortRaStatRelayReply Number of received DHCPv6 relay reply packets.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.12
msanDhcpv6PortRaStatOversizeError Number of discarded packets because max packet size exceeded.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.100
msanDhcpv6PortRaStatFrameError Number of discarded packets because frame error.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.101
msanDhcpv6PortRaStatFrameUnsyncError Number of received packets with frames not synchronized with state machines.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.102
msanDhcpv6PortRaStatSysError Number of discarded packets because system error.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1332.1.1.5.3.4.101.1.1.103

Table od DHCP RA parameters per port.

msanDhcpv6RaPortConfigEntry row .1.3.6.1.4.1.1332.1.1.5.3.4.102.1

Description.

Indexes

IF-MIBifIndex

Column	Syntax	OID
msanDhcpv6RaPortState State of DHCPv6 Relay Agent on the port (enable, disable, enable-client, enable-server)	Enumerationr/w Enumerated Values: 1 enable 2 enableCli 3 enableSrv 4 disable	.1.3.6.1.4.1.1332.1.1.5.3.4.102.1.1
msanDhcpv6RaPortTrusted Specifies DHCP RA Circuit type per port as trusted(1) or untrusted(2). Default value for user ports is untrusted(2) and for network ports trusted(1).	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.1332.1.1.5.3.4.102.1.2
msanDhcpv6RaPortInterfaceIdStandard DHCPv6 RA Circuit Id syntax mode per port.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.1332.1.1.5.3.4.102.1.3
msanDhcpv6RaPortInterfaceId DHCPv6 Option 82 Circuit Id for the port.	OctetString	.1.3.6.1.4.1.1332.1.1.5.3.4.102.1.4
msanDhcpv6RaPortRemoteId DHCPv6 Remote Id value for the port. If empty string, remote id is not added to DHCPv6 package.	OctetStringr/w	.1.3.6.1.4.1.1332.1.1.5.3.4.102.1.5
msanDhcpv6RaPortRemoteIdEnterpriseNum DHCPv6 Remote Id enterprise number for the port.	Integer32r/w Constraints: range: 1-999999	.1.3.6.1.4.1.1332.1.1.5.3.4.102.1.6

Table od DHCP RA parameters per Vlan.

msanDhcpv6RaVlanConfigEntry row .1.3.6.1.4.1.1332.1.1.5.3.4.103.1

Description.

Indexes

Q-BRIDGE-MIBdot1qVlanIndex

Column	Syntax	OID
msanDhcpv6RaVlanState DHCP RA state for specified VLAN ID.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.1332.1.1.5.3.4.103.1.1
msanDhcpv6RaVlanInterfaceIdStandard DHCPv6 RA Circuit Id syntax mode per port.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.1332.1.1.5.3.4.103.1.2

Description.

msanDhcpv6RaPortVlanConfigEntry row .1.3.6.1.4.1.1332.1.1.5.3.4.104.1

Description.

Indexes

IF-MIBifIndex Q-BRIDGE-MIBdot1qVlanIndex

Column	Syntax	OID
msanDhcpv6RaPortVlanRemoteId DHCPv6 Remote Id value for specified vlan_id per port.	OctetStringr/w	.1.3.6.1.4.1.1332.1.1.5.3.4.104.1.1
msanDhcpv6RaPortVlanRemoteIdEnterpriseNum DHCPv6 Remote Id enterprise number for specified vlan_id per port.	Integer32r/w Constraints: range: 1-999999	.1.3.6.1.4.1.1332.1.1.5.3.4.104.1.2
msanDhcpv6RaPortVlanRowStatus The row status object controls the creation/deletion of rows in this table. For row creation use createAndWait(5) [createAndGo(4) is not supported].	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1332.1.1.5.3.4.104.1.3

Description.

msanIgmpSnoopingEntry row .1.3.6.1.4.1.1332.1.1.5.3.8.2.1

Description.

Indexes

IF-MIBifIndex

Column	Syntax	OID
msanIgmpSnoopingIntfStandaloneQuerier Specify the period of time in seconds you want the IGMP Standalone Querier generate IGMP query packets. Value must be higher than msanIgmpSnoopingMaxResponseTime and lower than msanIgmpSnoopingGroupMembershipInterval o…	secondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1332.1.1.5.3.8.2.1.1
msanIgmpSnoopingIntfFilter Filtering of IGMP join/leave reports or queries frames.	Enumerationr/w Enumerated Values: 0 allowAll 1 allowReports 2 allowQueries 3 dropAll	.1.3.6.1.4.1.1332.1.1.5.3.8.2.1.2
msanIgmpSnoopingGroupLimit A maximum numbers of IGMP groups per interface. Value 0 means no limits.	Integer32r/w Constraints: range: 0-10	.1.3.6.1.4.1.1332.1.1.5.3.8.2.1.3

Description.

msanSwitchIGMPVlanCurrentMrouterEntry row .1.3.6.1.4.1.1332.1.1.5.3.8.3.1

Description.

Indexes

IF-MIBifIndex Q-BRIDGE-MIBdot1qVlanIndex

Column	Syntax	OID
msanSwitchIGMPVlanCurrentMrouterEnableState Returns per-interface per-vlan pairs where IGMP Mrouter is enabled.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1332.1.1.5.3.8.3.1.1

Description.

msanSwitchIGMPSnoopingStaticIntfMulticastRouterEntry row .1.3.6.1.4.1.1332.1.1.5.3.8.4.1

Description.

Indexes

IF-MIBifIndex

Column	Syntax	OID
msanSwitchIGMPSnoopingIntfIndex The port number to be selected. Each port maps to an interface.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.1332.1.1.5.3.8.4.1.1
msanSwitchIGMPSnoopingIntfAdminModedeprecated This enables or disables IGMP Snooping on a selected interface.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.1332.1.1.5.3.8.4.1.2
msanSwitchIGMPSnoopingIntfGroupMembershipIntervaldeprecated The amount of time in seconds that a switch will wait for a report from a particular group on the selected interface before deleting the interface from the entry. This value must be greater than agentSwitchIGMPSnoopingI…	Integer32r/w Constraints: range: 2-3600	.1.3.6.1.4.1.1332.1.1.5.3.8.4.1.3
msanSwitchIGMPSnoopingIntfMaxResponseTimedeprecated The amount of time in seconds a switch will wait after sending a query on the selected interface because it did not receive a report for a particular group in that interface. This value must be less than agentSwitchIGM…	Integer32r/w Constraints: range: 1-3599	.1.3.6.1.4.1.1332.1.1.5.3.8.4.1.4
msanSwitchIGMPSnoopingIntfMRPExpirationTimedeprecated The amount of time in seconds that a switch will wait for a query to be received on the selected interface before the interface is removed from the list of interfaces with multicast routers attached.	Integer32r/w Constraints: range: 0-3600	.1.3.6.1.4.1.1332.1.1.5.3.8.4.1.5
msanSwitchIGMPSnoopingIntfFastLeaveAdminModedeprecated This enables or disables IGMP Snooping Fast-Leave on specified interface.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.1332.1.1.5.3.8.4.1.6
msanSwitchIGMPSnoopingStaticIntfMulticastRouterMode Mode of static IGMP Mrouter on selected interface.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.1332.1.1.5.3.8.4.1.7
msanSwitchIGMPSnoopingIntfVlanIDsdeprecated This field lists all the VlanIDs which include the selected interface.	VlanList Description: Each octet within this value specifies a set of eight vlans, with the first octet specifying vlans 1 through 8, the second octet specifying vlans 9 through 16, etc. Within each octet, the most significant bit represents…	.1.3.6.1.4.1.1332.1.1.5.3.8.4.1.8

A table of the IGMP Snooping Vlan configuration entries.

msanSwitchIGMPSnoopingVlanEntry row .1.3.6.1.4.1.1332.1.1.5.3.8.6.1

Represents entry for a IGMP Snooping Vlan.

Indexes

Q-BRIDGE-MIBdot1qVlanIndex

Column	Syntax	OID
msanSwitchIGMPSnoopingVlanAdminModedeprecated This enables or disables IGMP Snooping on a selected Vlan interface.	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.1332.1.1.5.3.8.6.1.1
msanSwitchIGMPSnoopingVlanGroupMembershipIntervaldeprecated The amount of time in seconds that a switch will wait for a report from a particular group on the selected vlan before deleting the interface participating in the vlan from the entry. This value must be greater than age…	Integer32r/w Constraints: range: 2-3600	.1.3.6.1.4.1.1332.1.1.5.3.8.6.1.2
msanSwitchIGMPSnoopingVlanMaxResponseTimedeprecated The amount of time in seconds a switch will wait after sending a query on the selected vlan because it did not receive a report for a particular group in the interface participating in the vlan. This value must be less …	Integer32r/w Constraints: range: 1-3599	.1.3.6.1.4.1.1332.1.1.5.3.8.6.1.3
msanSwitchIGMPSnoopingVlanFastLeaveAdminModedeprecated This enables or disables IGMP Snooping on the selected vlan.	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.1332.1.1.5.3.8.6.1.4
msanSwitchIGMPSnoopingVlanMRPExpirationTimedeprecated The amount of time in seconds that a switch will wait for a query to be received on the selected interface participating in the vlan before the interface is removed from the list of interfaces with multicast routers att…	Integer32r/w Constraints: range: 0-3600	.1.3.6.1.4.1.1332.1.1.5.3.8.6.1.5
msanSwitchIGMPSnoopingVlanAdminState IGMP Snooping state on a selected Vlan interface. This parameter is ignored if global msanIgmpSnoopingAdminState value is disableAndDiscard(0) or disableAndBroadcast(1).	Enumerationr/w Enumerated Values: 0 disableAndDiscard 1 disableAndBroadcast 2 enable 3 enableAndUnknownGroupFlood	.1.3.6.1.4.1.1332.1.1.5.3.8.6.1.6