IPOA-MIB Table View

There is one entry in this table for every Logical IP
Subnet (LIS) of which this system is a member.
          
The bulk of the objects in an ipoaLisEntry exists
to control ATMARP for a particular LIS.  In a PVC only
environment it is implementation dependent as to
whether this table should be supported.

ipoaLisEntry row .1.3.6.1.2.1.10.46.1.2.1

Information about a single LIS of which this system
is a member.

Membership in a LIS is independent of the actual ATM
interfaces being used. The ipoaLisTable defines
all LISs that a system is a member of. …

Indexes

ipoaLisSubnetAddr

Column	Syntax	OID
ipoaLisSubnetAddr The IP subnet address associated with this LIS.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.2.1.10.46.1.2.1.1
ipoaLisDefaultMtu The default MTU used within this LIS. Note that the actual MTU used for a VC between two members of the LIS may be negotiated during connection setup and may be different than this value. The ipoaVcNegotiatedMtu objec…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.2.1.10.46.1.2.1.2
ipoaLisDefaultEncapsType The default encapsulation to use on VCs created for this LIS. Note that the actual encapsulation type may be negotiated during connection setup and may be different than this value. The ipoaVcNegotiatedEncapsType obje…	IpoaEncapsTyper/w Type Values: 1 llcSnap 2 vcMuxed 3 other	.1.3.6.1.2.1.10.46.1.2.1.3
ipoaLisInactivityTimer The time, in seconds, before a call established for an ipNetToMediaEntry on a client will timeout due to no traffic being passed on the VC. A value of 0 implies no time out.	secondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.10.46.1.2.1.4
ipoaLisMinHoldingTime The minimum amount of time, in seconds, that a call will remain open. If 0 then ipoaInactivityTimer will completely determine when a call is terminated.	secondsInteger32r/w Constraints: range: 0-65535	.1.3.6.1.2.1.10.46.1.2.1.5
ipoaLisQDepth The maximum number of outstanding requests that are allowed while waiting for ATMARP replies and InATMARP replies for this LIS.	packetsInteger32r/w Constraints: range: 1-65535	.1.3.6.1.2.1.10.46.1.2.1.6
ipoaLisMaxCalls The maximum number of SVCs that can be established simultaneously for this LIS.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.2.1.10.46.1.2.1.7
ipoaLisCacheEntryAge The time, in seconds, before an ipNetToMediaEntry will age out of the table. Note that the default value will be different for a client and a server. An ATMARP Server should use a default of 1200 and a client should u…	secondsInteger32r/w Constraints: range: 60-1200	.1.3.6.1.2.1.10.46.1.2.1.8
ipoaLisRetries The number of times the ATMARP request will be retried when no response is received in the timeout interval indicated by ipoaLisTimeout.	Integer32r/w Constraints: range: 0-10	.1.3.6.1.2.1.10.46.1.2.1.9
ipoaLisTimeout The time to wait, in seconds, before retransmission of an ARP request.	secondsInteger32r/w Constraints: range: 1-60	.1.3.6.1.2.1.10.46.1.2.1.10
ipoaLisDefaultPeakCellRate This object is the signalling parameter that should be used when setting up all best effort VCCs (Virtual Channel Connections). This parameter applies to the forward and backward direction on a per best effort VCC basis…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.10.46.1.2.1.11
ipoaLisActiveVcs Number of active SVCs for this LIS.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.46.1.2.1.12
ipoaLisRowStatus This object allows entries to be created and deleted in the ipoaLisTable. When the ipoaLisRowStatus deleted (by setting this object to destroy(6)), this has the side-effect of removing all entries from th…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.46.1.2.1.13

There is one entry in this table for every combination
of ipoaLisEntry and IP over ATM interface.

ipoaLisIfMappingEntry row .1.3.6.1.2.1.10.46.1.3.1

Defines an entry in the ipoaLisIfMappingTable.

Indexes

ipoaLisSubnetAddr ipoaLisIfMappingIfIndex

Column	Syntax	OID
ipoaLisIfMappingIfIndex The ipAdEntIfIndex object from an ipAddrEntry is used as an index to this table when its ipAdEntAddr is in the subnet implied by ipoaLisSubnetAddr.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.2.1.10.46.1.3.1.1
ipoaLisIfMappingRowStatus This object allows entries to be created and deleted in the ipoaLisIfMappingTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.46.1.3.1.2

The ATMARP clients running on this system.

ipoaArpClientEntry row .1.3.6.1.2.1.10.46.1.4.1

Information about a single ATMARP Client. Clients
can be started and stopped by adding and removing
entries from this table. An entry in the
ipoaArpClientTable has a corresponding entry in the
ipAddrTable. Both are i…

Indexes

IP-MIBipAdEntAddr

Column	Syntax	OID
ipoaArpClientAtmAddr The ATM address of the client.	IpoaAtmAddrr/w Type Constraints: range: 0..40	.1.3.6.1.2.1.10.46.1.4.1.1
ipoaArpClientSrvrInUse The ATM address of the ATMARP Server, ipoaArpRemoteSrvrAtmAddr, in use by this client. A zero length octet string implies that communication with a Remote ATMARP Server is not in effect.	IpoaAtmAddr Type Constraints: range: 0..40	.1.3.6.1.2.1.10.46.1.4.1.2
ipoaArpClientInArpInReqs The number of InATMARP requests received by this client.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.46.1.4.1.3
ipoaArpClientInArpOutReqs The number of InATMARP requests sent by this client.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.46.1.4.1.4
ipoaArpClientInArpInReplies The number of InATMARP replies received by this client.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.46.1.4.1.5
ipoaArpClientInArpOutReplies Total number of InATMARP replies sent by this client.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.46.1.4.1.6
ipoaArpClientInArpInvalidInReqs The number of times that this client detected an invalid InATMARP request.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.46.1.4.1.7
ipoaArpClientInArpInvalidOutReqs The number of times that this client did not receive an InATMARP reply.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.46.1.4.1.8
ipoaArpClientArpInReqs Total number of ATMARP requests received by this client.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.46.1.4.1.9
ipoaArpClientArpOutReqs Total number of ATMARP requests sent by this client.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.46.1.4.1.10
ipoaArpClientArpInReplies Total number of ATMARP replies received by this client.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.46.1.4.1.11
ipoaArpClientArpOutReplies Total number of ATMARP replies sent by this client.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.46.1.4.1.12
ipoaArpClientArpInNaks Total number of negative ATMARP replies received by this client.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.46.1.4.1.13
ipoaArpClientArpOutNaks Total number of negative ATMARP replies sent by this client. Classic IP and ARP over ATM does not require an ATMARP client to transmit an ATMARP_NAK upon receipt of an ATMARP request from another ATMARP c…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.46.1.4.1.14
ipoaArpClientArpUnknownOps The number of times that this client received an ATMARP message with an operation code for which it is not coded to support.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.46.1.4.1.15
ipoaArpClientArpNoSrvrResps The number of times this client failed to receive a response from a ATMARP Server within the ipoaLisTimeout value for ipoaLisRetries times. This may imply that the client will re-elect a new primary ATMARP Server for th…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.46.1.4.1.16
ipoaArpClientRowStatus This object allows entries to be created and deleted from the ipoaArpClientTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.46.1.4.1.17

The ATMARP Servers running on this system.

ipoaArpSrvrEntry row .1.3.6.1.2.1.10.46.1.5.1

Information about an ATMARP Server within a LIS. An
entry in this table has two indexes: first ipAdEntAddr,
which is the IP address that this system uses as a
member of the LIS, and then ipoaArpSrvrAddr, which is
the A…

Indexes

IP-MIBipAdEntAddr ipoaArpSrvrAddr

Column	Syntax	OID
ipoaArpSrvrAddr The ATM address of the ATMARP Server.	IpoaAtmAddr Type Constraints: range: 0..40	.1.3.6.1.2.1.10.46.1.5.1.1
ipoaArpSrvrLis The subnet address that identifies the LIS with which this server is associated.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.2.1.10.46.1.5.1.2
ipoaArpSrvrInArpInReqs The number of InATMARP requests received by this ATMARP Server.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.46.1.5.1.3
ipoaArpSrvrInArpOutReqs The number of InATMARP requests sent by this ATMARP Server.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.46.1.5.1.4
ipoaArpSrvrInArpInReplies The number of InATMARP replies received by this ATMARP Server.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.46.1.5.1.5
ipoaArpSrvrInArpOutReplies The number of InATMARP replies sent by this ATMARP Server.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.46.1.5.1.6
ipoaArpSrvrInArpInvalidInReqs The number of invalid InATMARP requests received by this ATMARP Server.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.46.1.5.1.7
ipoaArpSrvrInArpInvalidOutReqs The number of times that this server did not receive an InATMARP reply.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.46.1.5.1.8
ipoaArpSrvrArpInReqs Total number of ATMARP requests received by this ATMARP Server.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.46.1.5.1.9
ipoaArpSrvrArpOutReplies Total number of ATMARP replies sent by this ATMARP Server.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.46.1.5.1.10
ipoaArpSrvrArpOutNaks Total number of negative ATMARP replies sent by this ATMARP Server.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.46.1.5.1.11
ipoaArpSrvrArpDupIpAddrs The number of times that a duplicate IP address was detected by this ATMARP Server.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.46.1.5.1.12
ipoaArpSrvrArpUnknownOps The number of times that this ATMARP Server received an ATMARP message with an operation code for which it is not coded to support.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.46.1.5.1.13
ipoaArpSrvrRowStatus This object allows entries to be created and deleted from the ipoaArpSrvrTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.46.1.5.1.14

A table of non-local ATMARP Servers associated with a
LIS.  An entry in this table has three indexes: first
the ipoaLisSubnetAddr of the LIS for which the
corresponding ATMARP Server provides ATMARP services,
then the ipoaArpRemoteSrvrAtmAddr, which is the ATM
address of the remote ATMARP Server, and finally the
ifIndex of the interface on which the VC to the ATMARP
Remote Server will be opened.  An ifIndex value of 0
should be used when a single VC is to be shared for
ATMARP purposes by multiple interfaces.

ipoaArpRemoteSrvrEntry row .1.3.6.1.2.1.10.46.1.6.1

Information about one non-local ATMARP Server.

Indexes

ipoaLisSubnetAddr ipoaArpRemoteSrvrAtmAddr ipoaArpRemoteSrvrIfIndex

Column	Syntax	OID
ipoaArpRemoteSrvrAtmAddr The ATM address of the remote ATMARP Server.	IpoaAtmAddr Type Constraints: range: 0..40	.1.3.6.1.2.1.10.46.1.6.1.1
ipoaArpRemoteSrvrRowStatus This object allows entries to be created and deleted from the ipoaArpRemoteSrvrTable. Deleting an ipoaArpRemoteSrvrEntry (by setting this object to destroy(6)) may affect ipoaArpClientTable entries. The …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.46.1.6.1.2
ipoaArpRemoteSrvrIfIndex The ifIndex of the interface that the VC to the Remote ATMARP Server is associated with.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.2.1.10.46.1.6.1.3
ipoaArpRemoteSrvrIpAddr The IP Address of the Remote ATMARP Server. A value of 0.0.0.0 implies that this address isn't known.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.2.1.10.46.1.6.1.4
ipoaArpRemoteSrvrAdminStatus The desired state for use of the ATMARP Server represented by an entry in this table. ipoaArpRemoteSrvrAdminStatus values: up(1) - Attempt to activate use of the ATMARP Server represented by t…	Enumerationr/w Enumerated Values: 1 up 2 down	.1.3.6.1.2.1.10.46.1.6.1.5
ipoaArpRemoteSrvrOperStatus The current operational state for use of a Remote ATMARP Server. An up(1) entry has a VC established to the respective Remote ATMARP Server: up(1) - A VC exists to Remote ATMARP Server whose IP…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.2.1.10.46.1.6.1.6

A system that supports IP over ATM is an IP system and
therefore MUST support all of the appropriate tables in
the SNMPv2-MIB (RFC 1907), the IF-MIB (RFC 2233),
the IP-MIB (RFC 2011), the TCP-MIB (RFC 2012), and
the UDP-MIB (RFC 2013).  This includes the
ipNetToMediaTable (the ARP cache) that is defined
within the IP-MIB (RFC 2011).  The ipoaVcTable
keeps a set of VCs for each entry in the ARP cache
that was put there by an IP over ATM system acting
as either a host or server.  The ipoaVcTable doesn't
augment the ipNetToMediaTable (ARP Cache) since the
the correspondence between tables is not necessarily
one-to-one.
          
An ipNetToMediaPhysAddress object should contain the
content as defined by the IpoaAtmAddr textual
convention when used to hold an IPOA-MIB ATM Address.

ipoaVcEntry row .1.3.6.1.2.1.10.46.1.7.1

A VC (permanent or switched) that this host or server
has opened with another member of a LIS. Additional
information can be determined about the VC from the
ATM-MIB.

Entries in this table cannot be create…

Indexes

IP-MIBipNetToMediaIfIndex IP-MIBipNetToMediaNetAddress ipoaVcVpi ipoaVcVci

Column	Syntax	OID
ipoaVcVpi The VPI value for the Virtual Circuit.	IpoaVpiInteger Type Constraints: range: 0..255	.1.3.6.1.2.1.10.46.1.7.1.1
ipoaVcVci The VCI value for the Virtual Circuit.	IpoaVciInteger Type Constraints: range: 0..65535	.1.3.6.1.2.1.10.46.1.7.1.2
ipoaVcType The type of the Virtual Circuit.	IpoaAtmConnKind Type Values: 1 pvc 2 svcIncoming 3 svcOutgoing 4 spvcInitiator 5 spvcTarget	.1.3.6.1.2.1.10.46.1.7.1.3
ipoaVcNegotiatedEncapsType The encapsulation type used when communicating over this circuit.	IpoaEncapsType Type Values: 1 llcSnap 2 vcMuxed 3 other	.1.3.6.1.2.1.10.46.1.7.1.4
ipoaVcNegotiatedMtu The MTU used when communicating over this circuit.	Integer32 Constraints: range: 0-65535	.1.3.6.1.2.1.10.46.1.7.1.5

This table MUST be supported when PVCs are intended to
be supported in order to enable the setup of PVCs for
use by IP.

ipoaConfigPvcEntry row .1.3.6.1.2.1.10.46.1.8.1

Defines a single PVC that exists at this host for
use by IP.

Indexes

ipoaConfigPvcIfIndex ipoaConfigPvcVpi ipoaConfigPvcVci

Column	Syntax	OID
ipoaConfigPvcIfIndex The ifIndex of the ATM Interface that this PVC is associated with.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.2.1.10.46.1.8.1.1
ipoaConfigPvcVpi The VPI value for the Virtual Circuit.	IpoaVpiInteger Type Constraints: range: 0..255	.1.3.6.1.2.1.10.46.1.8.1.2
ipoaConfigPvcVci The VCI value for the Virtual Circuit.	IpoaVciInteger Type Constraints: range: 0..65535	.1.3.6.1.2.1.10.46.1.8.1.3
ipoaConfigPvcDefaultMtu Classical IP and ARP over ATM allows use of other MTU values for PVCs but considers how a value other than 9180 could be selected to be out of scope. ipoaConfigPvcDefaultMtu can be used to configure the MTU to be used …	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.2.1.10.46.1.8.1.4
ipoaConfigPvcRowStatus This object allows rows to be created and deleted in the ipoaConfigPvcTable. Creation of an entry in this table should eventually result in the creation of an ipNetToMediaEntry and a corresponding ipoaVcEntry after InA…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.46.1.8.1.5