IPATM-IPMC-MIB Table View

The objects defined in this table are used for
the management of MARS clients, ATM attached
endpoints.

marsClientEntry row .1.3.6.1.2.1.57.1.1.1

Each entry contains a MARS client and its associated
attributes. An entry in the marsClientTable has
a corresponding entry in the ipAddrTable defined in
RFC1213. Association between the ipAddrTable and
the marsClientTa…

Indexes

RFC1213-MIBipAdEntAddr marsClientIndex

Column	Syntax	OID
marsClientIndex The auxiliary variable used to identify instances of the columnar objects in the MARS MarsClientTable.	Integer32 Constraints: range: 1-65535	.1.3.6.1.2.1.57.1.1.1.1
marsClientAddr The ATM address associated with the ATM Client.	ATM-TC-MIBAtmAddrr/w Type Constraints: range: 0..40	.1.3.6.1.2.1.57.1.1.1.2
marsClientDefaultMarsAddr The default MARS ATM address which is needed to setup the initial signalling path between a MARS client and its associated MARS.	ATM-TC-MIBAtmAddrr/w Type Constraints: range: 0..40	.1.3.6.1.2.1.57.1.1.1.3
marsClientHsn The cluster membership own 32 bit Host Sequence Number. When a new cluster member starts up, it is initialized to zero. When the cluster member sends the MARS_JOIN to register, the HSN will be correctly set to the cur…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.1.1.1.4
marsClientRegistration An indication with regards to the registration status of this client. The registration codes of 'notRegistered (1)', 'registered (2)', and registered (3) are self-explanatory. The 'reRegisteringFault (4)' indicates the …	Enumerationr/w Enumerated Values: 1 notRegistered 2 registering 3 registered 4 reRegisteringFault 5 reRegisteringRedirMap	.1.3.6.1.2.1.57.1.1.1.5
marsClientCmi 16 bit Cluster member identifier (CMI) assigned by the MARS which uniquely identifies each endpoint attached to the cluster. The value becomes valid after the 'marsClientRegistration' is set to the value of 'registered…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.2.1.57.1.1.1.6
marsClientDefaultMtu The default maximum transmission unit (MTU) used for this cluster. Note that the actual size used for a VC between two members of the cluster may be negotiated during connection setup and may be different than this val…	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.2.1.57.1.1.1.7
marsClientFailureTimer A timer used to flag the failure of last MARS_MULTI to arrive. Default value = 10 seconds (recommended).	secondsInteger32r/w Constraints: range: 1-2147483647	.1.3.6.1.2.1.57.1.1.1.8
marsClientRetranDelayTimer The delay timer for sending out new MARS_REQUEST for the group after the client learned that there is no other group in the cluster. The timer must be set between 5 and 10 seconds inclusive.	secondsInteger32r/w Constraints: range: 5-10	.1.3.6.1.2.1.57.1.1.1.9
marsClientRdmMulReqAddRetrTimer The initial random L_MULTI_RQ/ADD retransmit timer which can be set between 5 and 10 seconds inclusive.	secondsInteger32r/w Constraints: range: 5-10	.1.3.6.1.2.1.57.1.1.1.10
marsClientRdmVcRevalidateTimer The random time to set VC_revalidate flag. The timer value ranges between 1 and 10 seconds inclusive.	secondsInteger32r/w Constraints: range: 1-10	.1.3.6.1.2.1.57.1.1.1.11
marsClientJoinLeaveRetrInterval MARS_JOIN/LEAVE retransmit interval. The minimum and recommended values are 5 and 10 seconds, respectively.	secondsInteger32r/w Constraints: range: 5-2147483647	.1.3.6.1.2.1.57.1.1.1.12
marsClientJoinLeaveRetrLimit MARS_JOIN/LEAVE retransmit limit. The maximum value is 5.	Integer32r/w Constraints: range: 0-5	.1.3.6.1.2.1.57.1.1.1.13
marsClientRegWithMarsRdmTimer Random time to register with MARS.	secondsInteger32r/w Constraints: range: 1-10	.1.3.6.1.2.1.57.1.1.1.14
marsClientForceWaitTimer Force wait if MARS re-registration is looping. The minimum value is 1 minute.	minutesInteger32r/w Constraints: range: 1-2147483647	.1.3.6.1.2.1.57.1.1.1.15
marsClientLmtToMissRedirMapTimer Timer limit for client to miss MARS_REDIRECT_MAPS.	secondsInteger32r/w Constraints: range: 1-4	.1.3.6.1.2.1.57.1.1.1.16
marsClientIdleTimer The configurable inactivity timer associated with a client. When a VC is created at this client, it gets the idle timer value from this configurable timer. The minimum suggested value is 1 minute and the recommended def…	minutesInteger32r/w Constraints: range: 1-2147483647	.1.3.6.1.2.1.57.1.1.1.17
marsClientRowStatus The object is used to create, delete or modify a row in this table. A row cannot be made 'active' until instances of all corresponding columns in the row of this table are appropriately configured and unt…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.57.1.1.1.18

This table contains a list of IP multicast group address
blocks associated with a MARS client.  Entries in this
table are used by the client that needs to receive or
transmit packets from/to the specified range of
multicast addresses.
Each row can be created or deleted via configuration.

marsClientMcGrpEntry row .1.3.6.1.2.1.57.1.2.1

Each entry represents a consecutive block of multicast
group addresses.

Indexes

RFC1213-MIBipAdEntAddr marsClientIndex marsClientMcMinGrpAddr marsClientMcMaxGrpAddr

Column	Syntax	OID
marsClientMcMinGrpAddr Minimum multicast group address - the min and max multicast forms multi-group block. If the MinGrpAddr and MaxGrpAddr are the same, it indicates that this block contains a single group address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.2.1.57.1.2.1.1
marsClientMcMaxGrpAddr Maximum multicast group address - the min and max multicast forms a multi-group block. If the MinGrpAddr and MaxGrpAddr are the same, it indicates that this block contains a single group address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.2.1.57.1.2.1.2
marsClientMcGrpRowStatus The object is used to create or delete a row in this table. Since other objects in this row are not-accessible 'index-objects', the value of this object has no effect on whether those objects in this conc…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.57.1.2.1.3

This table contains a list of backup MARS addresses that
a client can connect to in case of failure for connecting
to the primary server. The list of addresses is in
descending order of preference. It should be noted that
the backup list provided by the MARS to the client via
the MARS_REDIRECT_MAP message has a higher preference than
addresses that are manually configured into the client.
When such a list is received from the MARS, this information
should be inserted at the top of the list.
Each row can be created or deleted via configuration.

marsClientBackupMarsEntry row .1.3.6.1.2.1.57.1.3.1

Each entry represents an ATM address of a backup MARS.

Indexes

RFC1213-MIBipAdEntAddr marsClientIndex marsClientBackupMarsPriority marsClientBackupMarsAddr

Column	Syntax	OID
marsClientBackupMarsPriority The priority associated with a backup MARS. A lower priority value inidcates a higher preference.	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.2.1.57.1.3.1.1
marsClientBackupMarsAddr The ATM address associated with a backup MARS.	ATM-TC-MIBAtmAddr Type Constraints: range: 0..40	.1.3.6.1.2.1.57.1.3.1.2
marsClientBackupMarsRowStatus The object is used to create or delete a row in this table. Since other objects in this row are not-accessible 'index-objects', the value of this object has no effect on whether those objects in this conc…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.57.1.3.1.3

This table contains information about open virtual
circuits (VCs) that a client has.  For point to point
circuit, each entry represents a single VC connection
between this client ATM address to another party ATM
address.  In the case of point to multipoint connection
where a single source address is associated with
multiple destinations, several entries are used to
represent the relationship.  An example of point to
multi-point VC represented in a table is shown below.
          
       Client    VPI/VCI    Grp Addr1/Addr2    Part Addr
         1         0,1          g1,g2             p1
         1         0,1          g1,g2             p2
         1         0,1          g1,g2             p3
          
Note:  This table assumes the IP multicast address
       groups (min, max) defined in each entry are
       always consecutive.  In the case of that a
       client receives a JOIN/LEAVE with
       mars$flag.punched set, each pair of the IP
       groups will first be broken into several
       pairs of consecutive IP groups before each
       entry row corresponding to a pair of IP group
       is created.

marsClientVcEntry row .1.3.6.1.2.1.57.1.4.1

The objects contained in the entry are VC related
attributes such as VC signalling type, control VC
type, idle timer, negotiated MTU size, etc.

Indexes

RFC1213-MIBipAdEntAddr marsClientIndex marsClientVcVpi marsClientVcVci marsClientVcMinGrpAddr marsClientVcMaxGrpAddr marsClientVcPartyAddr

Column	Syntax	OID
marsClientVcVpi The value of virtual path identifier (VPI). Since a VPI can be numbered 0, this sub-index can take a value of 0.	Integer32 Constraints: range: 0-4095	.1.3.6.1.2.1.57.1.4.1.1
marsClientVcVci The value of virtual circuit identifier (VCI). Since a VCI can be numbered 0, this sub-index can take a value of 0.	Integer32 Constraints: range: 0-65535	.1.3.6.1.2.1.57.1.4.1.2
marsClientVcMinGrpAddr Minimum IP multicast group address - the min and max multicast forms a multi-group consecutive block which is associated with a table entry. if the MinGrpAddr and MaxGrpAddr are the same, it indicates tha…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.2.1.57.1.4.1.3
marsClientVcMaxGrpAddr Maximum IP multicast group address - the min and max multicast forms a multi-group consecutive block which is associated with a table entry. if the MinGrpAddr and MaxGrpAddr are the same, it indicates that the size of m…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.2.1.57.1.4.1.4
marsClientVcPartyAddr An ATM party address in which this VC is linked. The party type is identified by the marsClientVcPartyAddrType.	ATM-TC-MIBAtmAddr Type Constraints: range: 0..40	.1.3.6.1.2.1.57.1.4.1.5
marsClientVcPartyAddrType The party type is associated with the party address. The 'called (1)' indicates that the party address is a destination address which implies that VC is originated from this client. The 'calling (2)' indicates the VC w…	Enumerationr/w Enumerated Values: 1 called 2 calling	.1.3.6.1.2.1.57.1.4.1.6
marsClientVcType Circuit Connection type: permanent virtual circuit or switched virtual circuit.	Enumerationr/w Enumerated Values: 1 pvc 2 svc	.1.3.6.1.2.1.57.1.4.1.7
marsClientVcCtrlType Control VC type used to specify a particular connection. pointToPointVC (1): used by the ATM Clients for the registration and queries. This VC or the initial signalling path is set up from the source Client to a …	Enumerationr/w Enumerated Values: 1 pointToPointVC 2 clusterControlVC 3 pointToMultiPointVC	.1.3.6.1.2.1.57.1.4.1.8
marsClientVcIdleTimer The idle timer associated with this VC. The minimum suggested value is 1 minute and the recommended default value is 20 minutes.	minutesInteger32r/w Constraints: range: 1-2147483647	.1.3.6.1.2.1.57.1.4.1.9
marsClientVcRevalidate A flag associated with an open and active multipoint VC. It is checked every time a packet is queued for transmission on that VC. The object has the value of true (1) if revalidate is required and the value false (2) o…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.57.1.4.1.10
marsClientVcEncapsType The encapsulation type used when communicating over this VC.	Enumerationr/w Enumerated Values: 1 other 2 llcSnap	.1.3.6.1.2.1.57.1.4.1.11
marsClientVcNegotiatedMtu The negotiated MTU when communicating over this VC.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.2.1.57.1.4.1.12
marsClientVcRowStatus The object is used to create, delete or modify a row in this table. A row cannot be made 'active' until instances of all corresponding columns in the row of this table are appropriately configured. …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.57.1.4.1.13

The table contains statistics collected at MARS
clients.

marsClientStatEntry row .1.3.6.1.2.1.57.1.5.1

Each entry contains statistics collected at one MARS
client.

Indexes

RFC1213-MIBipAdEntAddr marsClientIndex

Column	Syntax	OID
marsClientStatTxReqMsgs Total number of MARS_REQUEST messages transmitted from a client.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.1.5.1.1
marsClientStatTxJoinMsgs Total number of MARS_JOIN messages transmitted from a client.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.1.5.1.2
marsClientStatTxLeaveMsgs Total number of MARS_LEAVE messages transmitted from a client.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.1.5.1.3
marsClientStatTxGrpLstReqMsgs Total number of MARS_GROUPLIST_REQUEST messages transmitted from a client.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.1.5.1.4
marsClientStatRxJoinMsgs Total number of MARS_JOIN messages received by a client.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.1.5.1.5
marsClientStatRxLeaveMsgs Total number of MARS_LEAVE messages received by a client.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.1.5.1.6
marsClientStatRxMultiMsgs Total number of MARS_MULTI messages received by a client.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.1.5.1.7
marsClientStatRxNakMsgs Total number of MARS_NAK messages received by a client.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.1.5.1.8
marsClientStatRxMigrateMsgs Total number of MARS_MIGRATE messages received by a client.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.1.5.1.9
marsClientStatRxGrpLstRplyMsgs Total number of MARS_GROUPLIST_REPLY messages received by a client.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.1.5.1.10
marsClientStatFailMultiMsgs Total number of timeouts occurred indicating failure of the last MARS_MULTI to arrive.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.1.5.1.11

The objects defined in this table are used for the
management of MARS servers.

marsEntry row .1.3.6.1.2.1.57.2.1.1

Each entry contains a MARS and its associated
attributes.

Indexes

marsIndex marsIfIndex

Column	Syntax	OID
marsIndex The auxiliary variable used to identify instances of the columnar objects in the MARS table.	Integer32 Constraints: range: 1-65535	.1.3.6.1.2.1.57.2.1.1.1
marsIfIndex The ifIndex of the interface that the MARS is associated with.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.2.1.57.2.1.1.2
marsAddr The ATM address associated with the MARS.	ATM-TC-MIBAtmAddrr/w Type Constraints: range: 0..40	.1.3.6.1.2.1.57.2.1.1.3
marsLocal A flag associated with a MARS entry. The object has the value of true (1) if the MARS whose interface is local to the machine that implements this MIB; otherwise the object has the value of false (2).	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.57.2.1.1.4
marsServStatus The current status of MARS.	Enumerationr/w Enumerated Values: 1 active 2 inactive 3 faulted	.1.3.6.1.2.1.57.2.1.1.5
marsServType Types of MARS servers: primary or backup.	Enumerationr/w Enumerated Values: 1 primary 2 backup	.1.3.6.1.2.1.57.2.1.1.6
marsServPriority Priority associated with a backup MARS server. A backup MARS server with lower priority value indicates a higher preference than other backup MARS servers to be used as the MARS server when the primary server fails.	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.2.1.57.2.1.1.7
marsRedirMapMsgTimer Periodic interval on which a multi-part MARS_REDIRECT_MAP is sent from this MARS.	minutesInteger32r/w Constraints: range: 1-2	.1.3.6.1.2.1.57.2.1.1.8
marsCsn Current cluster sequence number (CSN) which is global within the context of a given protocol. The CSN is incremented by the MARS on every transmission of a message on ClusterControlVC. A cluster member uses the CSN to…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.2.1.1.9
marsSsn Current server sequence number (SSN) which is global within the context of a given protocol. The SSN is incremented by the MARS on every transmission of a message on ServerControlVC. A MCS uses the SSN to track the me…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.2.1.1.10
marsRowStatus The object is used to create, delete or modify a row in this table. A row cannot be made 'active' until instances of all corresponding columns in the row of this table are appropriately configured and unt…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.57.2.1.1.11

This table contains a list of IP multicast address
blocks associated with a MARS.  Entries in this table
are used by the MARS host map table and the server map
table.  They should be created prior to being referenced
as indices by those tables.
Each row can be created or deleted via configuration.

marsMcGrpEntry row .1.3.6.1.2.1.57.2.2.1

Each entry represents a consecutive block of multicast
group addresses.

Indexes

marsIndex marsIfIndex marsMcMinGrpAddr marsMcMaxGrpAddr

Column	Syntax	OID
marsMcMinGrpAddr Minimum multicast group address - the min and max multicast forms multi-group block. If the MinGrpAddr and MaxGrpAddr are the same, it indicates that this block contains a single group address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.2.1.57.2.2.1.1
marsMcMaxGrpAddr Maximum multicast group address - the min and max multicast forms a multi-group block. If The MinGrpAddr and MaxGrpAddr are the same, it indicates that this block contains a single group address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.2.1.57.2.2.1.2
marsMcGrpAddrUsage Usage of the multicast address block. The hostMap (1) indicates that the address block is only used in the MARS host map table. The serverMap (2) indicates that the address block is only used in the MARS server map tab…	Enumerationr/w Enumerated Values: 1 hostMap 2 serverMap 3 hostServerMap	.1.3.6.1.2.1.57.2.2.1.3
marsMcGrpRxLayer3GrpSets Number of MARS_JOIN messages received with mars$flags.layer3grp flag set.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.2.2.1.4
marsMcGrpRxLayer3GrpResets Number of MARS_JOIN messages received with mars$flags.layer3grp flag reset.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.2.2.1.5
marsMcGrpRowStatus The object is used to create, delete or modify a row in this table. The value of this object has no effect on whether other objects in this conceptual row can be modified.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.57.2.2.1.6

This table caches mappings between IP multicast
address to a list of ATM addresses that are
configured or dynamically learned from the MARS.
This address resolution is used for the host map.
It supports the mapping of a block of multicast
group addresses to a cluster member address.  In
the case where a group block is associated with
multiple cluster members, several entries are
used to representing the relationship.

marsHostMapEntry row .1.3.6.1.2.1.57.2.3.1

Each entry row contains attributes associated with
the mapping between a multicast group block and an
ATM address.

Indexes

marsIndex marsIfIndex marsMcMinGrpAddr marsMcMaxGrpAddr marsHostMapAtmAddr

Column	Syntax	OID
marsHostMapAtmAddr The mapped cluster member ATM address.	ATM-TC-MIBAtmAddr Type Constraints: range: 0..40	.1.3.6.1.2.1.57.2.3.1.1
marsHostMapRowType Method in which this entry row is created. The static (1) indicates that this row is created through configuration. The dynamic (2) indicates that the row is created as the result of group address updates received at t…	Enumerationr/w Enumerated Values: 1 static 2 dynamic	.1.3.6.1.2.1.57.2.3.1.2
marsHostMapRowStatus The object is used to create, delete or modify a row in this table. This object must not be set to 'active' until instances of all corresponding columns in the row of this table are appropriately configur…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.57.2.3.1.3

This table caches mappings between IP multicast
address to a list of MCS ATM addresses that are
configured or dynamically learned from the MARS.
This address resolution is used for the server map.
It supports the mapping of a block of multicast
group addresses to a MCS address.  In the case
where a group block is associated with multiple
MCSs, several entries are used to representing the
relationship.

marsServerMapEntry row .1.3.6.1.2.1.57.2.4.1

Each entry row contains attributes associated with
the mapping between a multicast group block and an
MCS address.

Indexes

marsIndex marsIfIndex marsMcMinGrpAddr marsMcMaxGrpAddr marsServerMapAtmAddr

Column	Syntax	OID
marsServerMapAtmAddr The mapped MCS ATM address.	ATM-TC-MIBAtmAddr Type Constraints: range: 0..40	.1.3.6.1.2.1.57.2.4.1.1
marsServerMapRowType Method in which this entry row is created. The 'static (1)' indicates that this row is created through configuration. The 'dynamic (2)' indicates that the row is created as the result of group address updates received …	Enumerationr/w Enumerated Values: 1 static 2 dynamic	.1.3.6.1.2.1.57.2.4.1.2
marsServerMapRowStatus The object is used to create, delete or modify a row in this table. This object must not be set to 'active' until instances of all corresponding columns in the row of this table are appropriately configur…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.57.2.4.1.3

This table contains information about open virtual circuits
(VCs) that a MARS has.  For point to point circuit, each
entry represents a single VC connection between this MARS
ATM address to another party's ATM address.  In the case of
point to multipoint connection where a ControlVc is attached
with multiple leaf nodes, several entries are used  to
represent the relationship.  An example of point to
multi-point VC represented in a table is shown below.
          
     MARS     VPI/VCI    MARS Addr     Party Addr
       1         0,1         m1            p1
       1         0,1         m1            p2
       1         0,1         m1            p3

marsVcEntry row .1.3.6.1.2.1.57.2.5.1

The objects contained in the entry are VC related attributes
such as VC signalling type, control VC type, idle timer,
negotiated MTU size, etc.

Indexes

marsIndex marsIfIndex marsVcVpi marsVcVci marsVcPartyAddr

Column	Syntax	OID
marsVcVpi The value of virtual path identifier (VPI). Since a VPI can be numbered 0, this sub-index can take a value of 0.	Integer32 Constraints: range: 0-4095	.1.3.6.1.2.1.57.2.5.1.1
marsVcVci The value of virtual circuit identifier (VCI). Since a VCI can be numbered 0, this sub-index can take a value of 0.	Integer32 Constraints: range: 0-65535	.1.3.6.1.2.1.57.2.5.1.2
marsVcPartyAddr An ATM party address in which this VC is linked. The party type is identified by the marsVcPartyAddrType.	ATM-TC-MIBAtmAddr Type Constraints: range: 0..40	.1.3.6.1.2.1.57.2.5.1.5
marsVcPartyAddrType The party type is associated with the party address. The 'called (1)' indicates that the party address is a destination address which implies that VC is originated from this MARS. The 'calling (2)' indicates the VC was…	Enumerationr/w Enumerated Values: 1 called 2 calling	.1.3.6.1.2.1.57.2.5.1.6
marsVcType Circuit Connection type: permanent virtual circuit or switched virtual circuit.	Enumerationr/w Enumerated Values: 1 pvc 2 svc	.1.3.6.1.2.1.57.2.5.1.7
marsVcCtrlType Control VC type used to specify a particular connection. pointToPointVC (1): used by the ATM endpoints (clients) or the MCS for registration and queries. This VC is set up from a MARS client and MCS to this MARS.…	Enumerationr/w Enumerated Values: 1 pointToPointVC 2 clusterControlVC 3 serverControlVC	.1.3.6.1.2.1.57.2.5.1.8
marsVcIdleTimer The idle timer associated with this VC. The minimum suggested value is 1 minute and the recommended default value is 20 minutes.	minutesInteger32r/w Constraints: range: 1-2147483647	.1.3.6.1.2.1.57.2.5.1.9
marsVcCmi Cluster member identifier (CMI) which uniquely identifies each endpoint attached to the cluster. This variable applies to each 'leaf node' of an outgoing control VC.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.2.1.57.2.5.1.10
marsVcEncapsType The encapsulation type used when communicating over this VC.	Enumerationr/w Enumerated Values: 1 other 2 llcSnap	.1.3.6.1.2.1.57.2.5.1.11
marsVcNegotiatedMtu The negotiated MTU when communicating over this VC.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.2.1.57.2.5.1.12
marsVcRowStatus The object is used to create, delete or modify a row in this table. A row cannot be made 'active' until instances of all corresponding columns in the row of this table are appropriately configured. …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.57.2.5.1.13

This table contains ATM identities of all the currently
registered cluster members at a MARS.  Each entry represents
one set of ATM identities associated with one cluster member
or the MARS client.

marsRegClientEntry row .1.3.6.1.2.1.57.2.6.1

Each entry row contains attributes associated with one
register cluster member.

Indexes

marsIndex marsIfIndex marsRegClientCmi

Column	Syntax	OID
marsRegClientCmi This cluster member identifier is used as an auxiliary index for the entry in this table.	Integer32 Constraints: range: 0-65535	.1.3.6.1.2.1.57.2.6.1.1
marsRegClientAtmAddr The registered client's ATM address.	ATM-TC-MIBAtmAddr Type Constraints: range: 0..40	.1.3.6.1.2.1.57.2.6.1.2

This table contains ATM identities of all the currently
registered MCSs at a MARS. Each entry represents one set
of ATM identities associated with one MCS.

marsRegMcsEntry row .1.3.6.1.2.1.57.2.7.1

Each entry row contains attributes associated with one
registered MCS.

Indexes

marsIndex marsIfIndex marsRegMcsAtmAddr

Column	Syntax	OID
marsRegMcsAtmAddr The registered MCS's ATM address.	ATM-TC-MIBAtmAddr Type Constraints: range: 0..40	.1.3.6.1.2.1.57.2.7.1.1

The table contains statistics collected at MARS.

marsStatEntry row .1.3.6.1.2.1.57.2.8.1

Each entry contains statistics collected at one MARS.

Indexes

marsIndex marsIfIndex

Column	Syntax	OID
marsStatTxMultiMsgs Total number of MARS_MULTI transmitted by this MARS.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.2.8.1.1
marsStatTxGrpLstRplyMsgs Total number of MARS_GROUPLIST_REPLY messages transmitted by this MARS.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.2.8.1.2
marsStatTxRedirectMapMsgs Total number of MARS_REDIRECT_MAP messages transmitted by this MARS.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.2.8.1.3
marsStatTxMigrateMsgs Total number of MARS_MIGRATE messages transmitted by this MARS.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.2.8.1.4
marsStatTxNakMsgs Total number of MARS_NAK messages transmitted by this MARS.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.2.8.1.5
marsStatTxJoinMsgs Total number of MARS_JOIN messages transmitted by this MARS.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.2.8.1.6
marsStatTxLeaveMsgs Total number of MARS_LEAVE messages transmitted by this MARS.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.2.8.1.7
marsStatTxSjoinMsgs Total number of MARS_SJOIN messages transmitted by this MARS.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.2.8.1.8
marsStatTxSleaveMsgs Total number of MARS_SLEAVE messages transmitted by this MARS.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.2.8.1.9
marsStatTxMservMsgs Total number of MARS_MSERV messages transmitted by this MARS.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.2.8.1.10
marsStatTxUnservMsgs Total number of MARS_UNSERV messages transmitted by this MARS.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.2.8.1.11
marsStatRxReqMsgs Total number of MARS_REQUEST messages received by this MARS.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.2.8.1.12
marsStatRxGrpLstReqMsgs Total number of MARS_GROUPLIST_REQUEST messages received by this MARS.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.2.8.1.13
marsStatRxJoinMsgs Total number of MARS_JOINS messages received by this MARS.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.2.8.1.14
marsStatRxLeaveMsgs Total number of MARS_LEAVES messages received by this MARS.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.2.8.1.15
marsStatRxMservMsgs Total number of MARS_MSERV messages received by this MARS.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.2.8.1.16
marsStatRxUnservMsgs Total number of MARS_UNSERV messages received by this MARS.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.2.8.1.17
marsStatRxBlkJoinMsgs Total number of block joins messages received by this MARS.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.2.8.1.18
marsStatRegMemGroups Total number of IP multicast groups with 1 or more joined cluster members.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.2.8.1.19
marsStatRegMcsGroups Total number of IP multicast groups with 1 or more joined MCSs.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.2.8.1.20

The objects defined in this table are used for
the management of a multicast server (MCS).

marsMcsEntry row .1.3.6.1.2.1.57.3.1.1

Each entry contains a MCS and its associated
attributes.

Indexes

marsMcsIndex marsMcsIfIndex

Column	Syntax	OID
marsMcsIndex The auxiliary variable used to identify instances of the columnar objects in the MCS table.	Integer32 Constraints: range: 1-65535	.1.3.6.1.2.1.57.3.1.1.1
marsMcsIfIndex The ifIndex of the interface that the MCS is associated with.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.2.1.57.3.1.1.2
marsMcsAddr The ATM address associated with the MCS.	ATM-TC-MIBAtmAddrr/w Type Constraints: range: 0..40	.1.3.6.1.2.1.57.3.1.1.3
marsMcsDefaultMarsAddr The default MARS ATM address which is needed to setup the initial signalling path between a MCS and its associated MARS.	ATM-TC-MIBAtmAddrr/w Type Constraints: range: 0..40	.1.3.6.1.2.1.57.3.1.1.4
marsMcsRegistration An indication with regards to the registration STATUS of this MCS. The registration codes of 'notRegistered (1)', 'registered (2)', and registered (3) are self-explanatory. The 'reRegisteringFault (4)' indicates the MCS…	Enumerationr/w Enumerated Values: 1 notRegistered 2 registering 3 registered 4 reRegisteringFault 5 reRegisteringRedirMap	.1.3.6.1.2.1.57.3.1.1.5
marsMcsSsn The MCS own 32 bit Server Sequence Number. It is used to track the Mars sequence number.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.3.1.1.6
marsMcsDefaultMtu The default maximum transmission unit (MTU) used for this cluster. Note that the actual size used for a VC between two members of the cluster may be negotiated during connection setup and may be different than this val…	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.2.1.57.3.1.1.7
marsMcsFailureTimer A timer used to flag the failure of last MARS_MULTI to arrive. Default value = 10 seconds (recommended).	secondsInteger32r/w Constraints: range: 1-2147483647	.1.3.6.1.2.1.57.3.1.1.8
marsMcsRetranDelayTimer The delay timer for sending out new MARS_REQUEST for the group after the MCS learned that there is no other group in the cluster. The timer must be set between 5 and 10 seconds inclusive.	secondsInteger32r/w Constraints: range: 5-10	.1.3.6.1.2.1.57.3.1.1.9
marsMcsRdmMulReqAddRetrTimer The initial random L_MULTI_RQ/ADD retransmit timer which can be set between 5 and 10 seconds inclusive.	secondsInteger32r/w Constraints: range: 5-10	.1.3.6.1.2.1.57.3.1.1.10
marsMcsRdmVcRevalidateTimer The random time to set VC_revalidate flag. The timer value ranges between 1 and 10 seconds inclusive.	secondsInteger32r/w Constraints: range: 1-10	.1.3.6.1.2.1.57.3.1.1.11
marsMcsRegisterRetrInterval MARS_MSERV/UNSERV retransmit interval. The minimum and recommended values are 5 and 10 seconds, respectively.	secondsInteger32r/w Constraints: range: 5-2147483647	.1.3.6.1.2.1.57.3.1.1.12
marsMcsRegisterRetrLimit MARS_MSERV/UNSERV retransmit limit. The maximum value is 5.	Integer32r/w Constraints: range: 0-5	.1.3.6.1.2.1.57.3.1.1.13
marsMcsRegWithMarsRdmTimer Random time for a MCS to register with a MARS.	secondsInteger32r/w Constraints: range: 1-10	.1.3.6.1.2.1.57.3.1.1.14
marsMcsForceWaitTimer Force wait if MARS re-registration is looping. The minimum value is 1 minute.	minutesInteger32r/w Constraints: range: 1-2147483647	.1.3.6.1.2.1.57.3.1.1.15
marsMcsLmtToMissRedirMapTimer Timer limit for MCS to miss MARS_REDIRECT_MAPS.	secondsInteger32r/w Constraints: range: 1-4	.1.3.6.1.2.1.57.3.1.1.16
marsMcsIdleTimer The configurable inactivity timer associated with a MCS. When a VC is created at this MCS, it gets the idle timer value from this configurable timer. The minimum suggested value is 1 minute and the recommended default v…	minutesInteger32r/w Constraints: range: 1-2147483647	.1.3.6.1.2.1.57.3.1.1.17
marsMcsRowStatus The object is used to create, delete or modify a row in this table. A row cannot be made 'active' until instances of all corresponding columns in the row of this table are appropriately configured and unt…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.57.3.1.1.18

This table contains a list of IP multicast group address
blocks associated by a MARS MCS.  The MCS uses the
information contained in list to advertise its multicast
group service to the MARS.
Each row can be created or deleted via configuration.

marsMcsMcGrpEntry row .1.3.6.1.2.1.57.3.2.1

Each entry represents a consecutive block of multicast
group addresses.

Indexes

marsMcsIndex marsMcsIfIndex marsMcsMcMinGrpAddr marsMcsMcMaxGrpAddr

Column	Syntax	OID
marsMcsMcMinGrpAddr Minimum multicast group address - the min and max multicast forms multi-group block. If the MinGrpAddr and MaxGrpAddr are the same, it indicates that this block contains a single group address. Since the block joins …	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.2.1.57.3.2.1.1
marsMcsMcMaxGrpAddr Maximum multicast group address - the min and max multicast forms a multi-group block. If the MinGrpAddr and MaxGrpAddr are the same, it indicates that this block contains a single group address. Since the block joins …	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.2.1.57.3.2.1.2
marsMcsMcGrpRowStatus The object is used to create or delete a row in this table. Since other objects in this row are not-accessible 'index-objects', the value of this object has no effect on whether those objects in this conc…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.57.3.2.1.3

This table contains a list of backup MARS addresses that
a MCS can make contact to in case of failure for
connecting to the primary server. The list of addresses
is in descending order of preference. It should be noted
that the backup list provided by the MARS to the MCS
via the MARS_REDIRECT_MAP message has a higher preference
than addresses that are manually configured into the MCS.
When such a list is received from the MARS, this information
should be inserted at the top of the list.
Each row can be created or deleted via configuration.

marsMcsBackupMarsEntry row .1.3.6.1.2.1.57.3.3.1

Each entry represents an ATM address of a backup MARS.

Indexes

marsMcsIndex marsMcsIfIndex marsMcsBackupMarsPriority marsMcsBackupMarsAddr

Column	Syntax	OID
marsMcsBackupMarsPriority The priority associated with a backup MARS. A lower priority value inidcates a higher preference.	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.2.1.57.3.3.1.1
marsMcsBackupMarsAddr The ATM address associated with a backup MARS.	ATM-TC-MIBAtmAddr Type Constraints: range: 0..40	.1.3.6.1.2.1.57.3.3.1.2
marsMcsBackupMarsRowStatus The object is used to create or delete a row in this table. Since other objects in this row are not-accessible 'index-objects', the value of this object has no effect on whether those objects in this conc…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.57.3.3.1.3

This table contains information about open virtual
circuits (VCs) that a MCS has.  For point to
point circuit, each entry represents a single VC
connection between this MCS ATM address to another
party ATM address.  In the case of point to
multipoint connection where a single source address
is associated with multiple destinations, several
entries are used to represent the relationship.  An
example of point to multi-point VC represented in a
table is shown below.
          
   MCS      VPI/VCI    Grp Addr1/Addr2    Part Addr
    1         0,1          g1,g2             p1
    1         0,1          g1,g2             p2
    1         0,1          g1,g2             p3

marsMcsVcEntry row .1.3.6.1.2.1.57.3.4.1

The objects contained in the entry are VC related
attributes such as VC signalling type, control VC
type, idle timer, negotiated MTU size, etc.

Indexes

marsMcsIndex marsMcsIfIndex marsMcsVcVpi marsMcsVcVci marsMcsVcMinGrpAddr marsMcsVcMaxGrpAddr marsMcsVcPartyAddr

Column	Syntax	OID
marsMcsVcVpi The value of virtual path identifier (VPI). Since a VPI can be numbered 0, this sub-index can take a value of 0.	Integer32 Constraints: range: 0-4095	.1.3.6.1.2.1.57.3.4.1.1
marsMcsVcVci The value of virtual circuit identifier (VCI). Since a VCI can be numbered 0, this sub-index can take a value of 0.	Integer32 Constraints: range: 0-65535	.1.3.6.1.2.1.57.3.4.1.2
marsMcsVcMinGrpAddr Minimum IP multicast group address - the min and max multicast forms a multi-group block which is associated with a VC. If the MinGrpAddr and MaxGrpAddr are the same, it indicates that the size of multi-group block is …	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.2.1.57.3.4.1.3
marsMcsVcMaxGrpAddr Maximum IP multicast group address - the min and max multicast forms a multi-group block which is associated with a VC. If the MinGrpAddr and MaxGrpAddr are the same, it indicates that the size of multi-group block is 1…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.2.1.57.3.4.1.4
marsMcsVcPartyAddr An ATM party address in which this VC is linked. The party type is identified by the marsMcsVcPartyAddrType.	ATM-TC-MIBAtmAddr Type Constraints: range: 0..40	.1.3.6.1.2.1.57.3.4.1.5
marsMcsVcPartyAddrType The party type is associated with the party address. The called (1) indicates that the party address is a destination address which implies that VC is originated from this MCS. The calling (2) indicates …	Enumerationr/w Enumerated Values: 1 called 2 calling	.1.3.6.1.2.1.57.3.4.1.6
marsMcsVcType Circuit Connection type: permanent virtual circuit or switched virtual circuit.	Enumerationr/w Enumerated Values: 1 pvc 2 svc	.1.3.6.1.2.1.57.3.4.1.7
marsMcsVcCtrlType Control VC type used to specify a particular connection. pointToPointVC (1): used by the ATM Clients for the registration and queries. This VC or the initial signalling path is set up from the source MCS to a MAR…	Enumerationr/w Enumerated Values: 1 pointToPointVC 2 serverControlVC 3 pointToMultiPointVC	.1.3.6.1.2.1.57.3.4.1.8
marsMcsVcIdleTimer The idle timer associated with this VC. The minimum suggested value is 1 minute and the recommended default value is 20 minutes.	minutesInteger32r/w Constraints: range: 1-2147483647	.1.3.6.1.2.1.57.3.4.1.9
marsMcsVcRevalidate A flag associated with an open and active multipoint VC. It is checked every time a packet is queued for transmission on that VC. The object has the value of true (1) if revalidate is required and the value false (2) ot…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.57.3.4.1.10
marsMcsVcEncapsType The encapsulation type used when communicating over this VC.	Enumerationr/w Enumerated Values: 1 other 2 llcSnap	.1.3.6.1.2.1.57.3.4.1.11
marsMcsVcNegotiatedMtu The negotiated MTU when communicating over this VC.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.2.1.57.3.4.1.12
marsMcsVcRowStatus The object is used to create, delete or modify a row in this table. A row cannot be made 'active' until instances of all corresponding columns in the row of this table are appropriately configured. …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.57.3.4.1.13

The table contains statistics collected at MARS MCSs.

marsMcsStatEntry row .1.3.6.1.2.1.57.3.5.1

Each entry contains statistics collected at one
MARS MCS.

Indexes

marsMcsIndex marsMcsIfIndex

Column	Syntax	OID
marsMcsStatTxReqMsgs Total number of MARS_REQUEST messages transmitted from this MCS.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.3.5.1.1
marsMcsStatTxMservMsgs Total number of MARS_MSERV messages transmitted from this MCS.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.3.5.1.2
marsMcsStatTxUnservMsgs Total number of MARS_UNSERV messages transmitted from this MCS.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.3.5.1.3
marsMcsStatRxMultiMsgs Total number of MARS_MULTI messages received by this MCS.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.3.5.1.4
marsMcsStatRxSjoinMsgs Total number of MARS_SJOIN messages received by this MCS.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.3.5.1.5
marsMcsStatRxSleaveMsgs Total number of MARS_SLEAVE messages received by this MCS.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.3.5.1.6
marsMcsStatRxNakMsgs Total number of MARS_NAK messages received by this MCS.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.3.5.1.7
marsMcsStatRxMigrateMsgs Total number of MARS_MIGRATE messages received by this MCS.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.3.5.1.8
marsMcsStatFailMultiMsgs Total number of timeouts occurred indicating failure of the last MARS_MULTI to arrive.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.57.3.5.1.9