INT-SERV-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
31

intSrvIfAttribTable

table
.1.3.6.1.2.1.52.1.1 · 1 row entry · 6 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk intSrvIfAttribTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'INT-SERV-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'INT-SERV-MIB::intSrvIfAttribTable' 
The reservable attributes of the system's  in-
terfaces.
intSrvIfAttribEntry row .1.3.6.1.2.1.52.1.1.1
The reservable attributes of a given inter-
face.
Indexes
Column Syntax OID
intSrvIfAttribAllocatedBits
The number of bits/second currently allocated
to reserved sessions on the interface.
Bits per secondBitRate
Type Constraints:
range: 0..2147483647
 .1.3.6.1.2.1.52.1.1.1.1
intSrvIfAttribMaxAllocatedBits
The maximum number of bits/second that may be
allocated to reserved sessions on the inter-
face.
Bits per secondBitRater/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.2.1.52.1.1.1.2
intSrvIfAttribAllocatedBuffer
The amount of buffer space required to hold
the simultaneous burst of all reserved flows on
the interface.
BytesBurstSize
Type Constraints:
range: 0..2147483647
 .1.3.6.1.2.1.52.1.1.1.3
intSrvIfAttribFlows
The number of reserved flows currently active
on this interface. A flow can be created ei-
ther from a reservation protocol (such as RSVP
or ST-II) or via configuration information.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.52.1.1.1.4
intSrvIfAttribPropagationDelay
The amount of propagation delay that this in-
terface introduces in addition to that intro-
diced by bit propagation delays.
microsecondsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.2.1.52.1.1.1.5
intSrvIfAttribStatus
'active' on interfaces that are configured for
RSVP.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.2.1.52.1.1.1.6

intSrvFlowTable

table
.1.3.6.1.2.1.52.1.2 · 1 row entry · 25 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk intSrvFlowTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'INT-SERV-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'INT-SERV-MIB::intSrvFlowTable' 
Information describing the reserved flows  us-
ing the system's interfaces.
intSrvFlowEntry row .1.3.6.1.2.1.52.1.2.1
Information describing the use of a given in-
terface by a given flow. The counter
intSrvFlowPoliced starts counting at the in-
stallation of the flow.
Indexes
Column Syntax OID
intSrvFlowNumber
The number of this flow. This is for SNMP In-
dexing purposes only and has no relation to any
protocol value.
SessionNumber
Type Constraints:
range: 0..2147483647
 .1.3.6.1.2.1.52.1.2.1.1
intSrvFlowType
The type of session (IP4, IP6, IP6 with flow
information, etc).
SessionTyper/w
Type Constraints:
range: 1..255
 .1.3.6.1.2.1.52.1.2.1.2
intSrvFlowOwner
The process that installed this flow in the
queue policy database.
Enumerationr/w
Enumerated Values:
1other
2rsvp
3management
 .1.3.6.1.2.1.52.1.2.1.3
intSrvFlowDestAddr
The destination address used by all senders in
this session. This object may not be changed
when the value of the RowStatus object is 'ac-
tive'.
OctetStringr/w
Constraints:
range: 4-16
 .1.3.6.1.2.1.52.1.2.1.4
intSrvFlowSenderAddr
The source address of the sender selected by
this reservation. The value of all zeroes in-
dicates 'all senders'. This object may not be
changed when the value of the RowStatus object
is 'active'.
OctetStringr/w
Constraints:
range: 4-16
 .1.3.6.1.2.1.52.1.2.1.5
intSrvFlowDestAddrLength
The length of the destination address in bits.
This is the CIDR Prefix Length, which for IP4
hosts and multicast addresses is 32 bits. This
object may not be changed when the value of the
RowStatus object is 'active'.
Integer32r/w
Constraints:
range: 0-128
 .1.3.6.1.2.1.52.1.2.1.6
intSrvFlowSenderAddrLength
The length of the sender's address in bits.
This is the CIDR Prefix Length, which for IP4
hosts and multicast addresses is 32 bits. This
object may not be changed when the value of the
RowStatus object is 'active'.
Integer32r/w
Constraints:
range: 0-128
 .1.3.6.1.2.1.52.1.2.1.7
intSrvFlowProtocol
The IP Protocol used by a session. This ob-
ject may not be changed when the value of the
RowStatus object is 'active'.
Protocolr/w
Type Constraints:
range: 1..255
 .1.3.6.1.2.1.52.1.2.1.8
intSrvFlowDestPort
The UDP or TCP port number used as a destina-
tion port for all senders in this session. If
the IP protocol in use, specified by
intSrvResvFwdProtocol, is 50 (ESP) or 51 (AH),
this represents a virtual…
Portr/w
Type Constraints:
range: 2..4
 .1.3.6.1.2.1.52.1.2.1.9
intSrvFlowPort
The UDP or TCP port number used as a source
port for this sender in this session. If the
IP protocol in use, specified by
intSrvResvFwdProtocol is 50 (ESP) or 51 (AH),
this represents a generalize…
Portr/w
Type Constraints:
range: 2..4
 .1.3.6.1.2.1.52.1.2.1.10
intSrvFlowFlowId
The flow ID that this sender is using, if
this is an IPv6 session.
Integer32
Constraints:
range: 0-16777215
 .1.3.6.1.2.1.52.1.2.1.11
intSrvFlowInterface
The ifIndex value of the interface on which
this reservation exists.
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.2.1.52.1.2.1.12
intSrvFlowIfAddr
The IP Address on the ifEntry on which this
reservation exists. This is present primarily
to support those interfaces which layer multi-
ple IP Addresses on the interface.
OctetStringr/w
Constraints:
range: 4-16
 .1.3.6.1.2.1.52.1.2.1.13
intSrvFlowRate
The Reserved Rate of the sender's data stream.
If this is a Controlled Load service flow, this
rate is derived from the Tspec rate parameter
(r). If this is a Guaranteed service flow,
this rate is derived from t…
bits per secondBitRater/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.2.1.52.1.2.1.14
intSrvFlowBurst
The size of the largest burst expected from
the sender at a time.

If this is less than the sender's advertised
burst size, the receiver is asking the network
to provide flow pacing beyond what w…
bytesBurstSizer/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.2.1.52.1.2.1.15
intSrvFlowWeight
The weight used to prioritize the traffic.
Note that the interpretation of this object is
implementation-specific, as implementations
vary in their use of weighting procedures.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.2.1.52.1.2.1.16
intSrvFlowQueue
The number of the queue used by this traffic.
Note that the interpretation of this object is
implementation-specific, as implementations
vary in their use of queue identifiers.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.2.1.52.1.2.1.17
intSrvFlowMinTU
The minimum message size for this flow. The
policing algorithm will treat smaller messages
as though they are this size.
MessageSizer/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.2.1.52.1.2.1.18
intSrvFlowMaxTU
The maximum datagram size for this flow that
will conform to the traffic specification. This
value cannot exceed the MTU of the interface.
MessageSizer/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.2.1.52.1.2.1.19
intSrvFlowBestEffort
The number of packets that were remanded to
best effort service.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.52.1.2.1.20
intSrvFlowPoliced
The number of packets policed since the incep-
tion of the flow's service.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.52.1.2.1.21
intSrvFlowDiscard
If 'true', the flow is to incur loss when
traffic is policed. If 'false', policed traff-
ic is treated as best effort traffic.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.2.1.52.1.2.1.22
intSrvFlowService
The QoS service being applied to this flow.
QosService
Type Values:
1bestEffort
2guaranteedDelay
5controlledLoad
 .1.3.6.1.2.1.52.1.2.1.23
intSrvFlowOrder
In the event of ambiguity, the order in which
the classifier should make its comparisons.
The row with intSrvFlowOrder=0 is tried first,
and comparisons proceed in the order of in-
creasing value. Non-serial …
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.2.1.52.1.2.1.24
intSrvFlowStatus
'active' for all active flows. This object
may be used to install static classifier infor-
mation, delete classifier information, or au-
thorize such.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.2.1.52.1.2.1.25