IEEE8021-PBBTE-MIB Table View

The PBB-TE Protection group list table.  Each entry in this table
corresponds to a configured PBB-TE Protection Group configured on
the B-Component of an IB-BEB.

ieee8021PbbTeProtectionGroupListEntry row .1.3.111.2.802.1.1.10.1.1.1

The PBB-TE protection group list table entry.
Note that the component ID must refer to an B component

Indexes

IEEE8021-BRIDGE-MIBieee8021BridgeBaseComponentId ieee8021PbbTeProtectionGroupListGroupId

Column	Syntax	OID
ieee8021PbbTeProtectionGroupListGroupId The unique identifier for the protection group.	IEEE8021-TC-MIBIEEE8021PbbTeProtectionGroupId Type Constraints: range: 1..429467295	.1.3.111.2.802.1.1.10.1.1.1.1
ieee8021PbbTeProtectionGroupListMD This refers to the Maintenance Domain that qualifies the WorkingMA and ProtectionMA columns of this table. The MD index in this column must hold a value that matches the in the dot1agCfmStackMdIndex in the dot1agCfmSta…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.111.2.802.1.1.10.1.1.1.2
ieee8021PbbTeProtectionGroupListWorkingMA This refers to the Maintenance Association that refers to the PBB-TE MA that corresponds to the group's working entity. The MA index in this column must hold a value that is the value of dot1agCfmStackMaIndex column fo…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.111.2.802.1.1.10.1.1.1.3
ieee8021PbbTeProtectionGroupListProtectionMA This refers to the Maintenance Association that refers to the PBB-TE MA that corresponds to the group's protection entity. The MA index in this column must hold a value that is the value of dot1agCfmStackMaIndex column…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.111.2.802.1.1.10.1.1.1.4
ieee8021PbbTeProtectionGroupListStorageType This object indicates the persistence of this entry. All read-create columns must be writable if this column is set to permanent.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.111.2.802.1.1.10.1.1.1.5
ieee8021PbbTeProtectionGroupListRowStatus The status of this row. The writable columns in a row cannot be changed if the row is active. The PbbTeProtectionGroupListWorkingMA, and PbbTeProtectionGroupListProtectionMA columns must be specified be…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.111.2.802.1.1.10.1.1.1.6

This table contains references to all protection groups that
share a working or protection entity with a given protection
group.

ieee8021PbbTeMASharedGroupEntry row .1.3.111.2.802.1.1.10.1.2.1

The ieee801PbbTeMASharedGroupEntry table. The table is
indexed by protection group and by a simple integer. The
table lists all protection groups that load share with that
group.

Indexes

IEEE8021-BRIDGE-MIBieee8021BridgeBaseComponentId ieee8021PbbTeProtectionGroupListGroupId ieee8021PbbTeMASharedGroupSubIndex

Column	Syntax	OID
ieee8021PbbTeMASharedGroupSubIndex A simple integer to distinguish the members of the set of MAs that comprise the set of load sharing MAs for the specified protection group.	Unsigned32 Constraints: range: 1-4294967295	.1.3.111.2.802.1.1.10.1.2.1.1
ieee8021PbbTeMASharedGroupId This column holds the group id of a protection group that shares a working or protection group with the group whose index is the first index of this row.	IEEE8021-TC-MIBIEEE8021PbbTeProtectionGroupId Type Constraints: range: 1..429467295	.1.3.111.2.802.1.1.10.1.2.1.2

The PBB-TE TESI table contains information for each
TE Service Instance known to a system.

ieee8021PbbTeTesiEntry row .1.3.111.2.802.1.1.10.1.3.1

The PBB-TE TESI entry. Each entry maps a TESI to
a component and CBP.

Indexes

ieee8021PbbTeTesiId

Column	Syntax	OID
ieee8021PbbTeTesiId This is the unique identifier for a PBB-TE TE-SID.	IEEE8021-TC-MIBIEEE8021PbbTeTSidId Type Constraints: range: 1..42947295	.1.3.111.2.802.1.1.10.1.3.1.1
ieee8021PbbTeTesiComponent This is the component upon which the Bridge Port of the TESI is located.	IEEE8021-TC-MIBIEEE8021PbbComponentIdentifierr/w Type Constraints: range: 1..4294967295	.1.3.111.2.802.1.1.10.1.3.1.2
ieee8021PbbTeTesiBridgePort This is the Bridge Port of the TESI.	IEEE8021-TC-MIBIEEE8021BridgePortNumberr/w Type Constraints: range: 1..65535	.1.3.111.2.802.1.1.10.1.3.1.3
ieee8021PbbTeTesiStorageType This object indicates the persistence of this entry. All read-crate columns must be writable for rows whose StorageType is permanaent.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.111.2.802.1.1.10.1.3.1.4
ieee8021PbbTeTesiRowStatus This column holds the status for this row. When the status is active, no columns of this table may be modified. All columns must have a valid value before the row can be activated.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.111.2.802.1.1.10.1.3.1.5

The PBB-TE TE-SID table contains information for each TE
service instance known to a system.

ieee8021PbbTeTeSiEspEntry row .1.3.111.2.802.1.1.10.1.4.1

The PBB-TE TE-SID entry. Each entry refers to a
TE Service Instance by identifier and contains information about
one of the ESPs that comprise this TE Service Instance.

Indexes

ieee8021PbbTeTesiId ieee8021PbbTeTeSiEspEspIndex

Column	Syntax	OID
ieee8021PbbTeTeSiEspEspIndex This is an identifier, of local signifigance to a particular PBB-TE TE-SID which is used to index all of the ESPs associated with the TE-SID.	Unsigned32 Constraints: range: 1-4294967295	.1.3.111.2.802.1.1.10.1.4.1.1
ieee8021PbbTeTeSiEspEsp This column holds the ESP identifier for one of the Ethernet Switched Paths that define the TE service instance.	IEEE8021-TC-MIBIEEE8021PbbTeEspr/w Type Constraints: range: 14	.1.3.111.2.802.1.1.10.1.4.1.2
ieee8021PbbTeTeSiEspStorageType This object indicates the persistence of this entry. All read-create columns must be writable for permanent rows.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.111.2.802.1.1.10.1.4.1.3
ieee8021PbbTeTeSiEspRowStatus This column holds the status for this row. When the status is active, no columns of this table may be modified. All columns must have a valid value before the row can be activated.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.111.2.802.1.1.10.1.4.1.4

The PBB-TE Protection group config table contains
configuration and status information for each configuration
group configured in the system.  Entries in this table are
created implicitly by the creation of entries in the
ieee8021PbbTeProtectionGroupListTable table.

ieee8021PbbTeProtectionGroupConfigEntry row .1.3.111.2.802.1.1.10.1.5.1

The protection group confguration table entry. Rows are
created in this table implicitly when a row is added to the
ieee8021PbbTeProtectionGroupListTable.

Indexes

IEEE8021-BRIDGE-MIBieee8021BridgeBaseComponentId ieee8021PbbTeProtectionGroupListGroupId

Column	Syntax	OID
ieee8021PbbTeProtectionGroupConfigState This column indicates the current state of the protection switching state machine for a protection group.	Enumeration Enumerated Values: 1 workingPath 2 protectionPat 3 waitToRestore 4 protAdmin	.1.3.111.2.802.1.1.10.1.5.1.1
ieee8021PbbTeProtectionGroupConfigCommandStatus This column indicates the status of administrative commands within the protection group. It reflects the current operational administrative command being acted upon by the protection group.	IEEE8021-TC-MIBIEEE8021PbbTeProtectionGroupConfigAdmin Type Values: 1 clear 2 lockOutProtection 3 forceSwitch 4 manualSwitchToProtection 5 manualSwitchToWorking	.1.3.111.2.802.1.1.10.1.5.1.2
ieee8021PbbTeProtectionGroupConfigCommandLast This column indicates the last attempted administrative command applied to the protection group. It is changed whenever a write is made to the CommandAdmin column of this table and is a record of the last attempted …	IEEE8021-TC-MIBIEEE8021PbbTeProtectionGroupConfigAdmin Type Values: 1 clear 2 lockOutProtection 3 forceSwitch 4 manualSwitchToProtection 5 manualSwitchToWorking	.1.3.111.2.802.1.1.10.1.5.1.3
ieee8021PbbTeProtectionGroupConfigCommandAdmin This column is used by the operator to request that the protection group state machine perform some administrative operation. The operator requests a command by writing the command value to this column. The state mach…	IEEE8021-TC-MIBIEEE8021PbbTeProtectionGroupConfigAdminr/w Type Values: 1 clear 2 lockOutProtection 3 forceSwitch 4 manualSwitchToProtection 5 manualSwitchToWorking	.1.3.111.2.802.1.1.10.1.5.1.4
ieee8021PbbTeProtectionGroupConfigActiveRequests This column shows the status of active requests within the TE protection group.	IEEE8021-TC-MIBIEEE8021PbbTeProtectionGroupActiveRequests Type Values: 1 noRequest 2 loP 3 fs 4 pSFH 5 wSFH 6 manualSwitchToProtection 7 manualSwitchToWorking	.1.3.111.2.802.1.1.10.1.5.1.5
ieee8021PbbTeProtectionGroupConfigWTR This column is used to configure the wait-to-restore timer for the protection group operation. The timer may be configured in steps of 1 minute between 5 and 12 minutes, the default being 5. Additionally, the value 0 …	Unsigned32r/w Constraints: range: 0-0 range: 5-12	.1.3.111.2.802.1.1.10.1.5.1.6
ieee8021PbbTeProtectionGroupConfigHoldOff This column is used to configure the hold off timer. The purpose is to allow a service layer protection mechanism to have a chance to fix athe problem before switching at the client layer, or to allow an upstream prote…	Unsigned32r/w Constraints: range: 0-100	.1.3.111.2.802.1.1.10.1.5.1.7
ieee8021PbbTeProtectionGroupConfigNotifyEnable This column is used to enable or disable transmission of ieee8021PbbTeProtectionGroupAdminFailure notifications. These notifications are generated whenever an administrative command cannot be performed by the protectio…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.111.2.802.1.1.10.1.5.1.8
ieee8021PbbTeProtectionGroupConfigStorageType This object indicates the persistence of this entry. For permanent objects the ieee8021PbbTeProtectionGroupConfigCommandAdmin column must be writable.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.111.2.802.1.1.10.1.5.1.9

This table contains entries for each I-SID that is
transported over TE-SIDs that belong to protection groups.
Each I-SID maps to a single protection group.

ieee8021PbbTeProtectionGroupISidEntry row .1.3.111.2.802.1.1.10.1.6.1

The ieee8021PbbTeProtectionGroupISidTable entry.

Indexes

ieee8021PbbTeProtectionGroupISidIndex

Column	Syntax	OID
ieee8021PbbTeProtectionGroupISidIndex This is the I-Sid that is to be mapped to a protection group.	IEEE8021-TC-MIBIEEE8021PbbServiceIdentifier Type Constraints: range: 256..16777214	.1.3.111.2.802.1.1.10.1.6.1.1
ieee8021PbbTeProtectionGroupISidComponentId This column qualifies the GroupId column to a particular component.	IEEE8021-TC-MIBIEEE8021PbbComponentIdentifierr/w Type Constraints: range: 1..4294967295	.1.3.111.2.802.1.1.10.1.6.1.2
ieee8021PbbTeProtectionGroupISidGroupId This column contains the Id of the protection group used to transport the data belonging to the service identified by the I-SID value specified in the ISidIndex column of this table.	IEEE8021-TC-MIBIEEE8021PbbTeProtectionGroupIdr/w Type Constraints: range: 1..429467295	.1.3.111.2.802.1.1.10.1.6.1.3
ieee8021PbbTeProtectionGroupISidStorageType This object indicates the persistence of this entry.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.111.2.802.1.1.10.1.6.1.4
ieee8021PbbTeProtectionGroupISidRowStatus This column contains the status for this row. Once active none of the columns in the row may be modified. All columns must be specified when creating the row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.111.2.802.1.1.10.1.6.1.5

A table containing forwarding information for each vlan
specifying the set of ports to which forwarding of unicast
addressed frames for which no more specific forwarding information
applies.  This is configured statically by management.

ieee8021PbbTeBridgeStaticForwardAnyUnicastEntry row .1.3.111.2.802.1.1.10.1.7.1

Forwarding information for a VLAN, specifying the
set of ports to which forwarding of unicast addressed
frames for which no more specific forwarding information
applies.

The EgressPorts and ForbiddenPorts P…

Indexes

IEEE8021-Q-BRIDGE-MIBieee8021QBridgeVlanCurrentComponentId ieee8021PbbTeBridgeStaticForwardAnyUnicastVlanIndex

Column	Syntax	OID
ieee8021PbbTeBridgeStaticForwardAnyUnicastVlanIndex The VLAN-ID or other identifier refering to the VLAN to which this static filtering entry applies.	IEEE8021-TC-MIBIEEE8021VlanIndexOrWildcard Type Constraints: range: 1..4294967295	.1.3.111.2.802.1.1.10.1.7.1.1
ieee8021PbbTeBridgeStaticForwardAnyUnicastEgressPorts The complete set of ports to which a unicast addressed frame is to be forwarded. This value is persistent and will be restored upon system reboot. A port may not be added to this set if it is already a member of ieee8…	Q-BRIDGE-MIBPortListr/w	.1.3.111.2.802.1.1.10.1.7.1.2
ieee8021PbbTeBridgeStaticForwardAnyUnicastForbiddenPorts The complete set of ports to which a unicast addressed frame is to be filtered. This value is persistent and will be restored upon system reboot. A port may not be added to this set if it is already a member of ieee80…	Q-BRIDGE-MIBPortListr/w	.1.3.111.2.802.1.1.10.1.7.1.3
ieee8021PbbTeBridgeStaticForwardAnyUnicastStorageType The storage type for this row. All read-create columns must be writable for permanent entries.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.111.2.802.1.1.10.1.7.1.4
ieee8021PbbTeBridgeStaticForwardAnyUnicastRowStatus This column contains the status for this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.111.2.802.1.1.10.1.7.1.5