IEEE8021-PBBTE-MIB
Copyright (C) IEEE (2018). All Rights Reserved
This version of this MIB module is part of IEEE 802.1Q;
See the standard itself for full legal notices.
Unless otherwise indicated, the references in this MIB
module are to IEEE Std 802.1Q.
- Source file
IEEE8021-PBBTE-MIB- Last revised
- Identity
ieee8021PbbTeMib- Base OID
1.3.111.2.802.1.1.10
Imported Objects
| IEEE8021-BRIDGE-MIB | ieee8021BridgeBaseComponentId |
| IEEE8021-Q-BRIDGE-MIB | ieee8021QBridgeVlanCurrentComponentId |
| IEEE8021-TC-MIB | IEEE8021BridgePortNumber IEEE8021PbbComponentIdentifier IEEE8021PbbServiceIdentifier IEEE8021PbbTeEsp IEEE8021PbbTeProtectionGroupActiveRequests IEEE8021PbbTeProtectionGroupConfigAdmin IEEE8021PbbTeProtectionGroupId IEEE8021PbbTeTSidId IEEE8021VlanIndexOrWildcard ieee802dot1mibs |
| Q-BRIDGE-MIB | PortList |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | RowStatus StorageType TruthValue |
Net-SNMP examples using the rfc MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'IEEE8021-PBBTE-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'IEEE8021-PBBTE-MIB::ieee8021PbbTeMib'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IEEE8021-PBBTE-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IEEE8021-PBBTE-MIB::ieee8021PbbTeMib'
Objects (56)
Showing 56 of 56 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.111.2.802.1.1.10 |
||
.1.3.111.2.802.1.1.10.0 |
||
.1.3.111.2.802.1.1.10.1 |
||
.1.3.111.2.802.1.1.10.1.1 |
||
.1.3.111.2.802.1.1.10.1.1.1 |
||
.1.3.111.2.802.1.1.10.1.1.1.1 |
||
.1.3.111.2.802.1.1.10.1.1.1.2 |
||
.1.3.111.2.802.1.1.10.1.1.1.3 |
||
.1.3.111.2.802.1.1.10.1.1.1.4 |
||
.1.3.111.2.802.1.1.10.1.1.1.5 |
||
.1.3.111.2.802.1.1.10.1.1.1.6 |
||
.1.3.111.2.802.1.1.10.1.2 |
||
.1.3.111.2.802.1.1.10.1.2.1 |
||
|
Unsigned32
|
.1.3.111.2.802.1.1.10.1.2.1.1 |
|
.1.3.111.2.802.1.1.10.1.2.1.2 |
||
.1.3.111.2.802.1.1.10.1.3 |
||
.1.3.111.2.802.1.1.10.1.3.1 |
||
.1.3.111.2.802.1.1.10.1.3.1.1 |
||
.1.3.111.2.802.1.1.10.1.3.1.2 |
||
.1.3.111.2.802.1.1.10.1.3.1.3 |
||
.1.3.111.2.802.1.1.10.1.3.1.4 |
||
.1.3.111.2.802.1.1.10.1.3.1.5 |
||
.1.3.111.2.802.1.1.10.1.4 |
||
.1.3.111.2.802.1.1.10.1.4.1 |
||
|
Unsigned32
|
.1.3.111.2.802.1.1.10.1.4.1.1 |
|
.1.3.111.2.802.1.1.10.1.4.1.2 |
||
.1.3.111.2.802.1.1.10.1.4.1.3 |
||
.1.3.111.2.802.1.1.10.1.4.1.4 |
||
.1.3.111.2.802.1.1.10.1.5 |
||
.1.3.111.2.802.1.1.10.1.5.1 |
||
|
Enumeration
|
.1.3.111.2.802.1.1.10.1.5.1.1 |
|
.1.3.111.2.802.1.1.10.1.5.1.2 |
||
.1.3.111.2.802.1.1.10.1.5.1.3 |
||
.1.3.111.2.802.1.1.10.1.5.1.4 |
||
.1.3.111.2.802.1.1.10.1.5.1.5 |
||
|
Unsigned32
|
.1.3.111.2.802.1.1.10.1.5.1.6 |
|
|
Unsigned32
|
.1.3.111.2.802.1.1.10.1.5.1.7 |
|
.1.3.111.2.802.1.1.10.1.5.1.8 |
||
.1.3.111.2.802.1.1.10.1.5.1.9 |
||
.1.3.111.2.802.1.1.10.1.6 |
||
.1.3.111.2.802.1.1.10.1.6.1 |
||
.1.3.111.2.802.1.1.10.1.6.1.1 |
||
.1.3.111.2.802.1.1.10.1.6.1.2 |
||
.1.3.111.2.802.1.1.10.1.6.1.3 |
||
.1.3.111.2.802.1.1.10.1.6.1.4 |
||
.1.3.111.2.802.1.1.10.1.6.1.5 |
||
.1.3.111.2.802.1.1.10.1.7 |
||
.1.3.111.2.802.1.1.10.1.7.1 |
||
.1.3.111.2.802.1.1.10.1.7.1.1 |
||
.1.3.111.2.802.1.1.10.1.7.1.2 |
||
.1.3.111.2.802.1.1.10.1.7.1.3 |
||
.1.3.111.2.802.1.1.10.1.7.1.4 |
||
.1.3.111.2.802.1.1.10.1.7.1.5 |
||
.1.3.111.2.802.1.1.10.2 |
||
.1.3.111.2.802.1.1.10.2.1 |
||
.1.3.111.2.802.1.1.10.2.2 |
Dependencies (20) 7 direct · 13 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- IEEE8021-TC-MIBrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- SNMP-FRAMEWORK-MIBrfc
- IEEE8021-BRIDGE-MIBrfc
- BRIDGE-MIBrfc
- P-BRIDGE-MIBrfc
- RMON-MIBrfc
- RFC-1212rfc
- RFC1155-SMIrfc
- RFC1213-MIBrfc
- RFC1271-MIBrfc
- TOKEN-RING-RMON-MIBrfc
- RMON2-MIBrfc
- Q-BRIDGE-MIBrfc
- IEEE8021-Q-BRIDGE-MIBrfc
- IEEE8021-PBBTE-MIBrfcselected
Conformance Groups (9)
Compliance Statements (1)
OID
.1.3.111.2.802.1.1.10.2.1.1The compliance statement for support of the PBB-TE MIB module.
Required groups
| mandatory | ieee8021PbbTeGroupListGroup | |
| mandatory | ieee8021PbbTeMASharedGroup | |
| mandatory | ieee8021PbbTeTesiGroup | |
| mandatory | ieee8021PbbTeSiEspGroup | |
| mandatory | ieee8021PbbTeProtectionConfigManGroup | |
| mandatory | ieee8021PbbTeProtectionGroupISidGroup | |
| mandatory | ieee8021PbbTeFdbGroup | |
| mandatory | ieee8021PbbTeNotificationsGroup | |
| optional | ieee8021PbbTeProtectionConfigOptGroup |
This group allows implmementation to optionally change the WaitToRestore and HoldOff timers for protection groups. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| ieee8021PbbTeProtectionGroupConfigWTR | noaccess | This object is optional. | |
| ieee8021PbbTeProtectionGroupConfigHoldOff | noaccess | This object is optional. | |
| ieee8021PbbTeProtectionGroupListRowStatus |
active(1), notInService(2)
|
Support for createAndWait is not required. | |
| ieee8021PbbTeTeSiEspRowStatus |
active(1), notInService(2)
|
Support for createAndWait is not required. | |
| ieee8021PbbTeProtectionGroupISidRowStatus |
active(1), notInService(2)
|
Support for createAndWait is not required. |
Notifications / Traps (1)
| Name | OID | Description |
|---|---|---|
.1.3.111.2.802.1.1.10.0.1 |
A protection group generates this notification whenever
an adminisistrative command cannot be executed by the protection state machine. For example, a requested manual switch cannot be performed because of a signal failure condition. The management entity receiving the notification can identify the system from the network source address of the notification and can identify the protection group by the indices of the OID of the ieee8021PbbTeProtectionGroupConfigState variable in the notification: ieee8021BridgeBaseComponentId - Identifies the component on the Bridge where the protection group is configured. ieee8021PbbTeProtectionGroupListGroupId - The id of the protection group. |