IBM-ELAN-MIB Table View

This table contains configuration information
for the all LESs for each ELAN specified in the
elanConfTable. This table is used by the LECS
to know if a backup LES is configured.

ibmElanLesEntry row .1.3.6.1.4.1.2.6.118.1.2.1.4.2.2.1

Each entry represents a LES/Emulated LAN pair this
agent maintains.

Indexes

elanConfIndex elanLesIndex

Column	Syntax	OID
ibmBackupLesAtmAddrValidmandatory When True specifies the backup LES is specified by ibmBackupLesAtmAddr. When False specifies no backup LES is configured.	SNMPv2-TC-v1TruthValuer/w Type Values: 1 true 2 false	.1.3.6.1.4.1.2.6.118.1.2.1.4.2.2.1.1
ibmBackupLesAtmAddrmandatory The ATM address of the backup LES.	r/w	.1.3.6.1.4.1.2.6.118.1.2.1.4.2.2.1.2

This table contains configuration information the LECSs
within the scope of the agent.

ibmLecsConfEntry row .1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1

Each entry represents a LECS this
agent maintains.
Objects lecsUseBurnedInEsi, lecsConfiguredEsi,
and lecsConfiguredSelector cannot be modified
unless the lecsAdminStatus is set to
down(2). And the change doesn't take
…

Indexes

lecsConfIndex

Column	Syntax	OID
lecsUseBurnedInEsimandatory Specifies whether a MAC Address burned into the ATM device should be used as the End System Identifier component of the LECS ATM Address.	SNMPv2-TC-v1TruthValuer/w Type Values: 1 true 2 false	.1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.1
lecsConfiguredEsimandatory Locally Administered End System Identifier that is to be used as the ESI component of the LECS's ATM Address.	NWAYSMSS-MIBAtmPrivateAddrEsir/w Type Constraints: range: 6	.1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.2
lecsConfiguredSelectormandatory Specifies value to be used as Selector field component of LECS's ATM address.	NWAYSMSS-MIBAtmSelectorr/w Type Constraints: range: 1	.1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.3
lecsValidateBestEffortPcrmandatory When false, Best Effort Configuration Direct VCCs will be accepted without regard to the signalled forward Peak Cell Rate (PCR). When true, Best Effort VCCs will be rejected if the signalled forward PCR exceeds the lin…	SNMPv2-TC-v1TruthValuer/w Type Values: 1 true 2 false	.1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.4
configDirectMaxReservedBwmandatory Defines the maximum acceptable Sustained Cell Rate (SCR) for a Configuration Direct VCC; if SCR is not specified on the incoming call, then this parameter defines the maximum acceptable Peak Cell Rate (PCR) for a Config…	Integer32r/w Constraints: range: 0-155000	.1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.5
atmDevLineSpeedmandatory Line Speed of LECS ATM Device. This should not exposed to the user.		.1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.6
idleVccTimemandatory When the maximum number of VCCs is exceeded at the LECS, VCCs are released (see lecsMaxVccs). All active VCCs at the LECS are scanned. If a VCC has been inactive for this length of time, then it is released.	Integer32r/w Constraints: range: 3-43200	.1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.7
lecsMaxVccsmandatory This is the maximum number of simultaneous VCCs supported by the LECS. If this number is exceeded, then VCCs will be released (see idleVccTime).	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.8
lecsDomainNamemandatory This is the name to associate with the Domain of the LECS	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.9