HUAWEI-VO-ANALOG-IF-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
7
Rows
7
Columns
36

hwVoAnalogIfCommonConfigTable

table
.1.3.6.1.4.1.2011.5.25.1.3.1.1 · 1 row entry · 6 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk hwVoAnalogIfCommonConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VO-ANALOG-IF-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VO-ANALOG-IF-MIB::hwVoAnalogIfCommonConfigTable' 
The voice analog interface common configuration table contains information
about configuration parameters for analog voice interface.
hwVoAnalogIfCommonConfigEntry row .1.3.6.1.4.1.2011.5.25.1.3.1.1.1
An entry in the voice analog interface common configuration table.
The entry is automatically created when a analog voice interface hardware is found.
Indexes
Column Syntax OID
hwVoAnalogIfConfigPortNumber
Index of voice analog interface common config table. It identify the
number of the voice port.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.1.3.1.1.1.1
hwVoAnalogIfConfigPortType
This object expresses the type of the voice analog interfaces.
fxs : the type of the voice port is FXS.
fxo : the type of the voice port is FXO.
em : the type of the voice port is E&M.
Enumeration
Enumerated Values:
1fxs
2fxo
3em
 .1.3.6.1.4.1.2011.5.25.1.3.1.1.1.2
hwVoAnaloglfConfigPortImpedance
This object expresses the port impedance of voice analog interfaces.
impedance600Real : 600 Ohms
This impedance is primarily used by FXS.
impedanceComplex : 200 Ohms + 680 Ohms || 1…
Enumeration
Enumerated Values:
1impedance600Real
2impedanceComplex
 .1.3.6.1.4.1.2011.5.25.1.3.1.1.1.3
hwVoAnalogIfConfigInitialDigitTimeOut
This object states the longgest time to wait the first input digit from
caller side. The default value is 10 seconds.
Integer32r/w
Constraints:
range: 0-300
 .1.3.6.1.4.1.2011.5.25.1.3.1.1.1.4
hwVoAnalogIfConfigInterDigitTimeOut
This object states the longest time to wait between two input digit from
caller side. The default value is 10 seconds.
Integer32r/w
Constraints:
range: 0-300
 .1.3.6.1.4.1.2011.5.25.1.3.1.1.1.5
hwVoAnalogIfConfigCallDisconnect
This object states the time the system waits for the caller side to hang up
after the connect is disable. The default value is 10 seconds.
Integer32
Constraints:
range: 0-120
 .1.3.6.1.4.1.2011.5.25.1.3.1.1.1.6

hwVoAnalogIfFXSConfigTable

table
.1.3.6.1.4.1.2011.5.25.1.3.2.1 · 1 row entry · 2 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk hwVoAnalogIfFXSConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VO-ANALOG-IF-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VO-ANALOG-IF-MIB::hwVoAnalogIfFXSConfigTable' 
The voice analog interface fxs configuration table contains information
about configuration parameters for analog fxs voice interface.
hwVoAnalogIfFXSConfigEntry row .1.3.6.1.4.1.2011.5.25.1.3.2.1.1
An entry in the voice analog interface fxs configuration table.
The entry is automatically created when a analog fxs voice interface hardware is found.
Indexes
Column Syntax OID
hwVoAnalogIfFXSConfigPortNumber
Index of voice analog interface fxs config table. It identify the
number of the fxs voice port.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.1.3.2.1.1.1
hwVoAnalogIfFXSConfigStartMode
This object expresses the signaling type of analog fxs interface.
The default value is loopStart.
Enumeration
Enumerated Values:
1loopStart
2groundStart
 .1.3.6.1.4.1.2011.5.25.1.3.2.1.1.2

hwVoAnalogIfFXSTimerTable

table
.1.3.6.1.4.1.2011.5.25.1.3.2.3 · 1 row entry · 3 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk hwVoAnalogIfFXSTimerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VO-ANALOG-IF-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VO-ANALOG-IF-MIB::hwVoAnalogIfFXSTimerTable' 
The voice analog interface fxs timer table contains information
about timer parameters for analog fxs voice interface.
hwVoAnalogIfFXSTimerEntry row .1.3.6.1.4.1.2011.5.25.1.3.2.3.1
An entry in the voice analog interface fxs configuration table.
The entry is automatically created when a analog fxs voice interface hardware is found.
Indexes
Column Syntax OID
hwVoAnalogIfFXSTimerPortNumber
Index of voice analog interface fxs timer table. It identify the
number of the fxs voice port.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.1.3.2.3.1.1
hwVoAnalogIfFXSTimerDtmf
This object expresses outgoing dtmf digit duration of the analog
fxs interface. The default value is 120 milliseconds
Integer32
Constraints:
range: 50-500
 .1.3.6.1.4.1.2011.5.25.1.3.2.3.1.2
hwVoAnalogIfFXSTimerDtmfInterval
This object expresses outgoing dtmf interval duration of the analog
fxs interface. The default value is 120 milliseconds
Integer32
Constraints:
range: 50-500
 .1.3.6.1.4.1.2011.5.25.1.3.2.3.1.3

hwVoAnalogIfFXOConfigTable

table
.1.3.6.1.4.1.2011.5.25.1.3.3.1 · 1 row entry · 6 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk hwVoAnalogIfFXOConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VO-ANALOG-IF-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VO-ANALOG-IF-MIB::hwVoAnalogIfFXOConfigTable' 
The voice analog interface fxo configuration table contains information
about configuration parameters for analog fxo voice interface.
hwVoAnalogIfFXOConfigEntry row .1.3.6.1.4.1.2011.5.25.1.3.3.1.1
An entry in the voice analog interface fxo configuration table.
The entry is automatically created when a analog fxo voice interface hardware is found.
Indexes
Column Syntax OID
hwVoAnalogIfFXOConfigPortNumber
Index of voice analog interface fxo config table. It identify the
number of the fxo voice port.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.1.3.3.1.1.1
hwVoAnalogIfFXOConfigStartMode
This object expresses the signal type of analog fxo interface.
The default value is fxoLoopStart.
Enumeration
Enumerated Values:
1loopStart
2groundStart
 .1.3.6.1.4.1.2011.5.25.1.3.3.1.1.2
hwVoAnalogIfFXOConfigAlertNumber
This object expresses the number of rings detected before loop
being closed. The default value is 2.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.1.3.3.1.1.3
hwVoAnalogIfFXOConfigArea
This object expresses the busy tone of analog fxo interface.
The default value is europe.
Enumerationr/w
Enumerated Values:
1europe
2custom
3north-america
 .1.3.6.1.4.1.2011.5.25.1.3.3.1.1.4
hwVoAnalogIfFXOPreDialDelay
This object expresses the pre-dial delay of analog fxo interface.
The default value is 1 seconds.
Integer32r/w
Constraints:
range: 0-10
 .1.3.6.1.4.1.2011.5.25.1.3.3.1.1.5
hwVoAnaloglfFXOConfigPortImpedance
This object expresses the port impedance of FXO interfaces.
Enumerationr/w
Enumerated Values:
0impedance550r
1impedance600r
2impedance600c
3impedancecomplex
 .1.3.6.1.4.1.2011.5.25.1.3.3.1.1.6

hwVoAnalogIfFXOTimerTable

table
.1.3.6.1.4.1.2011.5.25.1.3.3.3 · 1 row entry · 3 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk hwVoAnalogIfFXOTimerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VO-ANALOG-IF-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VO-ANALOG-IF-MIB::hwVoAnalogIfFXOTimerTable' 
The voice analog interface fxo timer table contains information
about timer parameters for analog fxo voice interface.
hwVoAnalogIfFXOTimerEntry row .1.3.6.1.4.1.2011.5.25.1.3.3.3.1
An entry in the voice analog interface fxo timer table.
The entry is automatically created when a analog fxo voice interface hardware is found.
Indexes
Column Syntax OID
hwVoAnalogIfFXOTimerPortNumber
Index of voice analog interface fxo timer table. It identify the
number of the fxo voice port.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.1.3.3.3.1.1
hwVoAnalogIfFXOTimerDtmf
This object expresses outgoing dtmf digit duration of the analog
fxo interface. The default value is 120 milliseconds
Integer32r/w
Constraints:
range: 50-500
 .1.3.6.1.4.1.2011.5.25.1.3.3.3.1.2
hwVoAnalogIfFXOTimerDtmfInterval
This object expresses outgoing dtmf interval duration of the analog
fxo interface. The default value is 120 milliseconds
Integer32r/w
Constraints:
range: 50-500
 .1.3.6.1.4.1.2011.5.25.1.3.3.3.1.3

hwVoAnalogIfEMConfigTable

table
.1.3.6.1.4.1.2011.5.25.1.3.4.1 · 1 row entry · 6 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk hwVoAnalogIfEMConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VO-ANALOG-IF-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VO-ANALOG-IF-MIB::hwVoAnalogIfEMConfigTable' 
The voice analog interface e&m configuration table contains information
about configuration parameters for analog e&m voice interface.
hwVoAnalogIfEMConfigEntry row .1.3.6.1.4.1.2011.5.25.1.3.4.1.1
An entry in the voice analog interface e&m configuration table.
The entry is automatically created when a analog e&m voice interface hardware is found.
Indexes
Column Syntax OID
hwVoAnalogIfEMConfigPortNumber
Index of voice analog interface e&m config table. It identify the
number of the e&m voice port.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.1.3.4.1.1.1
hwVoAnalogIfEMConfigSignalMode
This object expresses the signal mode of the analog e&m interfaces.
The default value is immediateDial.
Enumerationr/w
Enumerated Values:
1delayDial
2immediateDial
3winkStart
 .1.3.6.1.4.1.2011.5.25.1.3.4.1.1.2
hwVoAnalogIfEMConfigPhyParm
This object expresses the operation of the analog e&m signal.
The default value of this object is fourWiresOperation.
Enumerationr/w
Enumerated Values:
1twoWiresOperation
2fourWiresOperation
 .1.3.6.1.4.1.2011.5.25.1.3.4.1.1.3
hwVoAnalogIfEMConfigPhyType
This object expresses the e&m lead signaling type of the analog e&m interface.
The default is type5.
Enumerationr/w
Enumerated Values:
1type1
2type2
3type3
5type5
 .1.3.6.1.4.1.2011.5.25.1.3.4.1.1.4
hwVoAnalogIfEMConfigTimeoutRinging
This object expresses the ring timeout of the analog e&m interface.
The value of 65535 indicates the timer is approach infinity. The
default value of this object is 60 seconds.
Integer32r/w
Constraints:
range: 65535-65535
range: 5-600
 .1.3.6.1.4.1.2011.5.25.1.3.4.1.1.5
hwVoAnalogIfEMConfigTimeoutWaitDigit
This object expresses the wait digit timeout of the analog e&m interface.
The value of 65535 indicates the timer is approach infinity. The
default value of this object is 5 seconds.
Integer32r/w
Constraints:
range: 3-600
range: 65535-65535
 .1.3.6.1.4.1.2011.5.25.1.3.4.1.1.6

hwVoAnalogIfEMTimerTable

table
.1.3.6.1.4.1.2011.5.25.1.3.4.3 · 1 row entry · 10 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk hwVoAnalogIfEMTimerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VO-ANALOG-IF-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VO-ANALOG-IF-MIB::hwVoAnalogIfEMTimerTable' 
The voice analog interface e&m timer table contains information
about timer parameters for analog e&m voice interface.
hwVoAnalogIfEMTimerEntry row .1.3.6.1.4.1.2011.5.25.1.3.4.3.1
An entry in the voice analog interface e&m timer table.
The entry is automatically created when a analog e&m voice interface hardware is found.
Indexes
Column Syntax OID
hwVoAnalogIfEMTimerPortNumber
Index of voice analog interface e&m timer table. It identify the
number of the e&m voice port.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.1.3.4.3.1.1
hwVoAnalogIfEMTimerDtmf
This object expresses outgoing dtmf digit duration of the analog
e&m interface. The default value is 120 milliseconds
Integer32r/w
Constraints:
range: 50-500
 .1.3.6.1.4.1.2011.5.25.1.3.4.3.1.2
hwVoAnalogIfEMTimerDtmfInterval
This object expresses outgoing dtmf interval duration of the analog
e&m interface. The default value is 120 milliseconds
Integer32r/w
Constraints:
range: 50-500
 .1.3.6.1.4.1.2011.5.25.1.3.4.3.1.3
hwVoAnalogIfEMTimerCallInterval
This object expresses the dureation of call clearing. The default value
is 200 milliseconds.
Integer32r/w
Constraints:
range: 200-2000
 .1.3.6.1.4.1.2011.5.25.1.3.4.3.1.4
hwVoAnalogIfEMTimerSendWink
This object expresses the max time between receiving seizure signal
and sending wink signal. This object can olny be used when
hwVoAnalogIfEMConfigSignalMode is 'winkStart'. The default value is
500 milliseconds.
Integer32r/w
Constraints:
range: 100-5000
 .1.3.6.1.4.1.2011.5.25.1.3.4.3.1.5
hwVoAnalogIfEMTimerWinkRising
This object expresses the max time between sending seizure signal and
receiving wink signal. This object can only be used when
hwVoAnalogIfEMConfigSignalMode is 'winkStart'. The default value is
2000 milliseconds.
Integer32r/w
Constraints:
range: 100-5000
 .1.3.6.1.4.1.2011.5.25.1.3.4.3.1.6
hwVoAnalogIfEMTimerWinkHold
This object expresses the max duration for sending wink signal. This
object can only be used when hwVoAnalogIfEMConfigSignalMode is 'winkStart'.
The default value is 500 milliseconds.
Integer32r/w
Constraints:
range: 100-3000
 .1.3.6.1.4.1.2011.5.25.1.3.4.3.1.7
hwVoAnalogIfEMTimerDialoutDelay
This object expresses max time sending called digits. This object can
only be used when hwVoAnalogIfEMConfigSignalMode is 'immediate'. The
default value is 300 milliseconds.
Integer32r/w
Constraints:
range: 50-5000
 .1.3.6.1.4.1.2011.5.25.1.3.4.3.1.8
hwVoAnalogIfEMTimerRising
This object expresses the wait duration between receiveing seizure
signal and sending delay signal. This object can only be used when
hwVoAnalogIfEMConfigSignalMode is 'delayDial'. The default value is
300 milliseconds.
Integer32r/w
Constraints:
range: 20-2000
 .1.3.6.1.4.1.2011.5.25.1.3.4.3.1.9
hwVoAnalogIfEMTimerHold
This object expresses the max time sending delay signal. This object
can only be used when hwVoAnalogIfEMConfigSignalMode is 'delayDial'.
The default value is 400 milliseconds.
Integer32r/w
Constraints:
range: 100-5000
 .1.3.6.1.4.1.2011.5.25.1.3.4.3.1.10