HUAWEI-DISMAN-PING-MIB Table View

Defines the ping Control Extend Table for providing, via SNMP,
the capability of performing ping operations at
a remote host.

hwPingCtlEntry row .1.3.6.1.4.1.2011.5.25.28.1.2.1

Defines an entry in the hwpingCtlTable. The operation of this
table is same as that of pingResultsTable.

Indexes

No indexes recorded

Column	Syntax	OID
hwpingCtlTargetPort This object represents the target's port number. This object is applicable to udpEcho, tcpConnect and jitter probes.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2011.5.25.28.1.2.1.1
hwpingCtlSourcePort This object represents the source's port number. If this object is not specified, the application will get a port allocated by the system. This object is applicable to all probes except dns, dlsw.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2011.5.25.28.1.2.1.2
hwpingCtlTTL Specifies the value to store in the TTL Field in the IP packet used to encapsulate the ping probe.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.28.1.2.1.3
hwpingCtlJitterAdminInterval This value represents the inter-packet delay between packets and is in milliseconds. This value is currently used for Jitter probe. This object is applicable to jitter probe only.	millisecondsInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.28.1.2.1.4
hwpingCtlJitterAdminNumPackets This value represents the number of packets that need to be transmitted. This value is currently used for Jitter probe. This object is applicable to jitter probe only.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.28.1.2.1.5
hwpingCtlHttpOperationType Http operation type:get or post.	Enumerationr/w Enumerated Values: 1 get 2 post	.1.3.6.1.4.1.2011.5.25.28.1.2.1.6
hwpingCtlHttpOperationString Http operation string.for example,if you choose get operation type,the string will be url , home page and http version.	OctetStringr/w Constraints: range: 0-240	.1.3.6.1.4.1.2011.5.25.28.1.2.1.7
hwpingCtlFtpOperationType Ftp operation type:get or put	Enumerationr/w Enumerated Values: 1 get 2 put	.1.3.6.1.4.1.2011.5.25.28.1.2.1.8
hwpingCtlFtpUsername Ftp username	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.2011.5.25.28.1.2.1.9
hwpingCtlFtpPassword Ftp password.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.2011.5.25.28.1.2.1.10
hwpingCtlFtpOperationString Ftp operation string.If the ftp operation type is get,the string will be file name that you will get from ftp server.	OctetStringr/w Constraints: range: 0-240	.1.3.6.1.4.1.2011.5.25.28.1.2.1.11
hwpingCtlVPNInstance This field is used to specify the VPN name in which the PING operation will be userd. The agent will use the field to identify the VPN routing Table for this operation.	OctetStringr/w Constraints: range: 0-31	.1.3.6.1.4.1.2011.5.25.28.1.2.1.12

Defines the Ping Results Extend Table for providing
the capability of performing ping operations at
a remote host.  The results of these operations are
stored in the hwpingResultsTable . The operation of this 
table is same as that of pingResultsTable.

hwpingResultsEntry row .1.3.6.1.4.1.2011.5.25.28.1.3.1

The operation of this table is same as that of pingResultsTable.

Indexes

DISMAN-PING-MIBpingCtlOwnerIndex DISMAN-PING-MIBpingCtlTestName

Column	Syntax	OID
hwpingResultsRttNumDisconnects When the pingCtlType is 'icmpecho' , this object represents the number of times that the target or hop along the path to a target became disconnected. For all other values of pingCtlType, this object will remain zero…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.28.1.3.1.1
hwpingResultsRttTimeouts The number of occasions when a PING operation was not completed before a timeout occurred, i.e. pingCtlTimeOut was exceeded. Since the PING operation was never completed, the completion time of these ope…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.28.1.3.1.2
hwpingResultsRttBusies The number of occasions when a PING operation could not be initiated because a previous PING operation has not been completed. When the pingCtlType is 'pathEcho' this can occur for both connection orient…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.28.1.3.1.3
hwpingResultsRttNoConnections When the pingCtlType is 'icmpecho' this is the number of occasions when a PING operation could not be initiated because the connection to the target has not been established. For all other pingCtlTypes this object wi…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.28.1.3.1.4
hwpingResultsRttDrops The number of occasions when a PING operation could not be initiated because some necessary internal resource (for example memory) was not available,or the operation completion could not be recognized.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.28.1.3.1.5
hwpingResultsRttSequenceErrors When the pingCtlType is 'icmpecho' this is the number of PING operation completions received with an unexpected sequence identifier. For all other values of pingCtlType this object will remain zero. Wh…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.28.1.3.1.6
hwpingResultsRttStatsErrors The number of some other errors	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.28.1.3.1.7
hwpingResultsMaxDelaySD The maximal delay from source device to destination device. Currently this value is only used for JITTER test, and this value must be 0 in other type test. In JITTER test, if destination system time is not valid, the…	millisecondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.28.1.3.1.8
hwpingResultsMaxDelayDS The maximal delay from destination device to source device. Currently this value is only used for JITTER test, and this value is 0 in other type test. In JITTER test, if destination system time is not valid, the DS de…	millisecondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.28.1.3.1.9
hwpingResultsLostPacketRatio The value of this object reflects the drop rate of HWPing test. For example, this value is 30 that means source device only had received 70% packets of total sent packets.	millisecondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.28.1.3.1.10

A table which contains the status of latest Jitter 
operation.

hwPingJitterStatsEntry row .1.3.6.1.4.1.2011.5.25.28.1.4.1

A table which contains the status of latest Jitter
operation.

This entry is created only if the pingCtlType
is hwpingjitter.

Indexes

DISMAN-PING-MIBpingCtlOwnerIndex DISMAN-PING-MIBpingCtlTestName

Column	Syntax	OID
hwPingJitterStatsNumOfRTT The number of Jitter's that are successfully measured.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.28.1.4.1.1
hwPingJitterStatsMinOfPositivesSD The minimum of all positive jitter values from packets sent from source to destination.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.28.1.4.1.2
hwPingJitterStatsMaxOfPositivesSD The maximum of all positive jitter values from packets sent from source to destination.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.28.1.4.1.3
hwPingJitterStatsNumOfPositivesSD The sum of number of all positive jitter values from packets sent from source to destination.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.28.1.4.1.4
hwPingJitterStatsSumOfPositivesSD The sum of RTT's of all positive jitter values from packets sent from source to destination.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.28.1.4.1.5
hwPingJitterStatsSum2PositivesSD The sum of square of RTT's of all positive jitter values from packets sent from source to destination.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.28.1.4.1.6
hwPingJitterStatsMinOfNegativesSD The minimum of absolute values of all negative jitter values from packets sent from source to destination.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.28.1.4.1.7
hwPingJitterStatsMaxOfNegativesSD The maximum of absolute values of all negative jitter values from packets sent from source to destination.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.28.1.4.1.8
hwPingJitterStatsNumOfNegativesSD The sum of number of all negative jitter values from packets sent from source to destination.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.28.1.4.1.9
hwPingJitterStatsSumOfNegativesSD The sum of all negative jitter values from packets sent from source to destination.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.28.1.4.1.10
hwPingJitterStatsSum2NegativesSD The sum of square of RTT's of all negative jitter values from packets sent from source to destination.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.28.1.4.1.11
hwPingJitterStatsMinOfPositivesDS The minimum of all positive jitter values from packets sent from destination to source.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.28.1.4.1.12
hwPingJitterStatsMaxOfPositivesDS The maximum of all positive jitter values from packets sent from destination to source.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.28.1.4.1.13
hwPingJitterStatsNumOfPositivesDS The sum of number of all positive jitter values from packets sent from destination to source.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.28.1.4.1.14
hwPingJitterStatsSumOfPositivesDS The sum of RTT's of all positive jitter values from packets sent from destination to source.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.28.1.4.1.15
hwPingJitterStatsSum2PositivesDS The sum of squares of RTT's of all positive jitter values from packets sent from destination to source.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.28.1.4.1.16
hwPingJitterStatsMinOfNegativesDS The minimum of all negative jitter values from packets sent from destination to source.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.28.1.4.1.17
hwPingJitterStatsMaxOfNegativesDS The maximum of all negative jitter values from packets sent from destination to source.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.28.1.4.1.18
hwPingJitterStatsNumOfNegativesDS The sum of number of all negative jitter values from packets sent from destination to source.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.28.1.4.1.19
hwPingJitterStatsSumOfNegativesDS The sum of RTT's of all negative jitter values from packets sent from destination to source.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.28.1.4.1.20
hwPingJitterStatsSum2NegativesDS The sum of squares of RTT's of all negative jitter values from packets sent from destination to source.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.28.1.4.1.21
hwPingJitterStatsPacketLossSD The number of packets lost when sent from source to destination.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.28.1.4.1.22
hwPingJitterStatsPacketLossDS The number of packets lost when sent from destination to source.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.28.1.4.1.23
hwPingJitterStatsAvePositivesSD The average of RTT's of all positive jitter values from packets sent from source to destination.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.28.1.4.1.24
hwPingJitterStatsAveNegativesSD The average of all negative jitter values from packets sent from source to destination.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.28.1.4.1.25
hwPingJitterStatsAvePositivesDS The average of RTT's of all positive jitter values from packets sent from destination to source.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.28.1.4.1.26
hwPingJitterStatsAveNegativesDS The average of RTT's of all negative jitter values from packets sent from destination to source.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.28.1.4.1.27
hwPingJitterStatsPktLossUnknown The number of packets which lost but not knowing result .	millisecondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.28.1.4.1.28

A table which contains the status of hwping tcp server 
configuration information.

hwPingTcpServerEntry row .1.3.6.1.4.1.2011.5.25.28.1.6.1

A table which contains the status of hwping tcp server
configuration information.

This entry is includeed not only the tcp server ip address
but also the tcp server udp port. If used for VPN it is also
i…

Indexes

hwPingTcpServerIpAddress hwPingTcpServerPort hwpingTcpServerVPNInstance

Column	Syntax	OID
hwPingTcpServerIpAddress This object represents the tcp server's ip address. This object and hwpingTcpServerPort is hwPingTcpServerTable index.	InetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2011.5.25.28.1.6.1.1
hwPingTcpServerPort This object represents the tcp server's port number. This object and hwPingTcpServerIpAddress is hwPingTcpServerTable index.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2011.5.25.28.1.6.1.2
hwpingTcpServerVPNInstance This field is used to specify the VPN name in which the PING operation will be userd. The TCP server will use the field to identify the VPN routing Table for this operation.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.2011.5.25.28.1.6.1.3
hwpingTcpServerRowStatus This object allows entries to be created and deleted in the hwPingTcpServerTable. A value MUST be specified for hwPingTcpServerIpAddress and hwPingTcpServerPort prior to a transition to active(1) state …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.28.1.6.1.4

A table which contains the status of hwping udp server 
configuration information.

hwPingUdpServerEntry row .1.3.6.1.4.1.2011.5.25.28.1.7.1

A table which contains the status of hwping udp server
configuration information.

This entry is includeed not only the udp server ip address
but also the udp server udp port.If used for VPN it is also
in…

Indexes

hwPingUdpServerIpAddress hwPingUdpServerPort hwpingUdpServerVPNInstance

Column	Syntax	OID
hwPingUdpServerIpAddress This object represents the udp server's ip address. This object and hwpingUdpServerPort is hwPingUdpServerEntry index.	InetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2011.5.25.28.1.7.1.1
hwPingUdpServerPort This object represents the udp server's port number. This object and hwPingUdpServerIpAddress is hwPingUdpServerEntry index.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2011.5.25.28.1.7.1.2
hwpingUdpServerVPNInstance This field is used to specify the VPN name in which the PING operation will be userd. The UDP server will use the field to identify the VPN routing Table for this operation.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.2011.5.25.28.1.7.1.3
hwpingUdpServerRowStatus This object allows entries to be created and deleted in the hwPingUdpServerTable. A value MUST be specified for hwPingUdpServerIpAddress and hwPingUdpServerPort prior to a transition to active(1) state …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.28.1.7.1.4