HUAWEI-ANCP-AN-MIB Table View

This table represents the ANCP sessions in the access
node. An entry in this table needs to be configured
(created) before an ANCP session might be started.
		  The index of this table is ancpAnSessionConfigSessionId.

ancpAnSessionConfigEntry row .1.3.6.1.4.1.2011.5.106.1.3.1

This table represents the ANCP sessions in the access
node. An entry in this table needs to be configured
(created) before an ANCP session might be started.
The index of this entry is ancpAnSessionConfigSessionId.

Indexes

No indexes recorded

Column	Syntax	OID
ancpAnSessionConfigSessionId An index of a session referred by this row. The index is unique across all partitions. The referred session may be actually established or just potential. Prior to creating a row in the table it is advised to check the …	Unsigned32	.1.3.6.1.4.1.2011.5.106.1.3.1.1
ancpAnSessionConfigRowStatus An object that allows entries in this table to be created, modified and deleted using the RowStatus convention. A SET operation to any other attribute in this row, when this object is set to 'active' (1), MUST be reject…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.106.1.3.1.2
ancpAnSessionConfigGsmpVersion The maximum version number of the GSMP protocol that may be used in this session. The value of this object is persistent.	GSMP-MIBGsmpVersionr/w Constraints: range: 0-7 range: 65535-65535	.1.3.6.1.4.1.2011.5.106.1.3.1.3
ancpAnSessionConfigGsmpSubVersion The maximum subversion number of the GSMP protocol that may be used in this session. The value of this object is persistent.	HUAWEI-ANCP-TC-MIBGsmpSubVersionr/w	.1.3.6.1.4.1.2011.5.106.1.3.1.4
ancpAnSessionConfigEncapsulationType Required encapsulation for this session. The value of this object is persistent. Options: 1. tcp(1) -indicates that the type is tcp.	Enumerationr/w Constraints: range: 0-7 range: 65535-65535	.1.3.6.1.4.1.2011.5.106.1.3.1.5
ancpAnSessionConfigCapabilities ANCP capabilities supported by the AN in this session. When all bits are set to zero then this means that no capabilities are supported. The value of this object is persistent.	HUAWEI-ANCP-TC-MIBAncpSessionCapabilitiesr/w Type Values: 0 topologyDiscovery 1 lineConfig 2 multicast 3 l2Oam	.1.3.6.1.4.1.2011.5.106.1.3.1.6
ancpAnSessionConfigAliveTimer The timer specifies the nominal time between periodic adjacency protocol messages generated by the access node. It is a constant for the duration of an ANCP session. The timer is specified in units of 100ms. The value o…	decisecondsUnsigned32r/w	.1.3.6.1.4.1.2011.5.106.1.3.1.7
ancpAnSessionConfigPortReportShaper The timer specifies the nominal time between 2 EventReport messages related to the same port. It is a constant for the duration of a GSMP session. The timer is specified in units of 100ms. The value of this object is pe…	decisecondsUnsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2011.5.106.1.3.1.8
ancpAnSessionConfigAggregateReportShaper The timer specifies the nominal time between 2 EventReport messages related to any port. It is a constant for the duration of a GSMP session. The timer is specified in units of 10ms. The value of this object is persiste…	centisecondsUnsigned32r/w	.1.3.6.1.4.1.2011.5.106.1.3.1.9
ancpAnSessionConfigTransportRetryTimer The timer specifies the nominal time between 2 transport connection setup attempts done by the access node. The transport protocol is specified in ancpAnSessionConfigEncapsulationType. The timer is specified in units of…	decisecondsUnsigned32r/w	.1.3.6.1.4.1.2011.5.106.1.3.1.10
ancpAnSessionConfigAncpRetryTimer The timer specifies the nominal time between 2 ANCP connection setup attempts. The timer is specified in units of 100ms. A value 0 means that the access node will NOT spontaneously trigger an ANCP session. Whatever the …	decisecondsUnsigned32r/w	.1.3.6.1.4.1.2011.5.106.1.3.1.11
ancpAnSessionConfigAnName The name of the access node. The first three octets must be an Organizationally Unique Identifier (OUI) that identifies the manufacturer of the access node. This object can be (one of) the MAC address(es) of the access …	GSMP-MIBGsmpNameTyper/w Type Constraints: range: 6	.1.3.6.1.4.1.2011.5.106.1.3.1.12
ancpAnSessionConfigPartitionId The Id for this session's specific access node partition. This object has a meaning only if partitions are used (ancpAnPartitionsUsed='true') and is ignored otherwise. The value of this object is persistent.	GSMP-MIBGsmpPartitionIdTyper/w Enumerated Values: 1 null 2 synsent 3 synrcvd 4 estab Type Constraints: range: 1	.1.3.6.1.4.1.2011.5.106.1.3.1.13
ancpAnSessionConfigWindowSize The maximum number of unacknowledged request messages that may be transmitted by the controller without the possibility of loss. This field is used to prevent request messages from being lost in the access node because …	Unsigned32r/w	.1.3.6.1.4.1.2011.5.106.1.3.1.14
ancpAnSessionConfigRelatedInterface This object contains the value of an ifIndex object, defined in IF-MIB, indicating an interface corresponding to this session. The corresponding interface might be either physical or logical (e.g., IP Interface). The va…	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.106.1.3.1.15
ancpAnSessionConfigRelatedEntity This object contains the name of an object instance uniquely identifying a lower layer entity associated with this session. For example, in the case where the session is associated with an ATM VCC, this object might be…	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.2011.5.106.1.3.1.16
ancpAnSessionConfigSvid If the session is associated with a single VLAN, this object contains the VLAN ID of the single VLAN tag. If ancpAnSessionConfigCvid is also nonzero then the session is associated with two VLAN tags, S-VLAN tag and C-VL…	Q-BRIDGE-MIBVlanIdOrNoner/w Type Constraints: range: 0..4094	.1.3.6.1.4.1.2011.5.106.1.3.1.17
ancpAnSessionConfigSPrio If the session is associated with a single VLAN, this object contains the priority value of the single VLAN tag. If ancpAnSessionConfigCvid is also nonzero then the session is associated with two VLAN tags, S-VLAN tag a…	Unsigned32r/w	.1.3.6.1.4.1.2011.5.106.1.3.1.18
ancpAnSessionConfigCvid If the session is associated with two VLANs, has both S-VLAN tag and C-VLAN tag, this object contains the VLAN ID of the inner VLAN tag (also called C-VLAN ID). In such a case the value of this object SHOULD be nonzero.…	Q-BRIDGE-MIBVlanIdOrNoner/w Type Constraints: range: 0..4094	.1.3.6.1.4.1.2011.5.106.1.3.1.19
ancpAnSessionConfigCPrio If the session is associated with two VLANs, has both S-VLAN tag and C-VLAN tag, this object contains the priority value of the inner VLAN tag (also called C-VLAN priority). In such a case the value of this object SHOUL…	Unsigned32r/w Constraints: range: 0-16777215	.1.3.6.1.4.1.2011.5.106.1.3.1.20
ancpAnSessionConfigNasIpAddressType The type of address in ancpAnSessionConfigNasIpAddress. The value of this object is persistent.	INET-ADDRESS-MIBInetAddressTyper/w Constraints: range: 0-16777215 Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2011.5.106.1.3.1.21
ancpAnSessionConfigNasIpAddress The IP address used for the ANCP session peer (NAS). The type of this IP address attribute is determined by the value of ancpAnSessionConfigNasIpAddressType. The value of this object is persistent.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2011.5.106.1.3.1.22
ancpAnSessionConfigEncapPortNumber The port number used for the transport protocol establishment to the ANCP peer. The transport protocol type is specified by ancpAnSessionConfigEncapsulationType and as it is set by default to 'tcp' then the default port…	Unsigned32r/w	.1.3.6.1.4.1.2011.5.106.1.3.1.23
ancpAnSessionConfigNotifyDnEnable This object specifies if ancpAnSessionDown notification should be generated when this session leaves the 'estab' state as given by ancpAnCurrentSessionState in the corresponding row in ancpAnCurrentSessionTable. The val…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.106.1.3.1.24
ancpAnSessionConfigNotifyUpEnable This object specifies if ancpAnSessionUp notification should be generated when this session goes to 'estab' state as given by ancpAnCurrentSessionState in the corresponding row in ancpAnCurrentSessionTable. The value of…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.106.1.3.1.25

This table gives actual information of the sessions
in the access node.
A row in this table is created when the corresponding row
in the ancpAnSessionConfigTable is created.
A row in this table is deleted when the corresponding row
in the ancpAnSessionConfigTable is deleted.
		  The index of this table is ancpAnSessionConfigSessionId.

ancpAnCurrentSessionEntry row .1.3.6.1.4.1.2011.5.106.1.4.1

This table gives actual information of the sessions
in the access node.
A row in this table is created when the corresponding row
in the ancpAnSessionConfigTable is created.
A row in this table is deleted when the corre…

Indexes

No indexes recorded

Column	Syntax	OID
ancpAnCurrentSessionState The state of this session. The null (1) state is returned if the proper encapsulation data is not yet configured, if the row is not in active status or if the session is in NULL state as defined in the GSMP specificatio…	Enumeration	.1.3.6.1.4.1.2011.5.106.1.4.1.1
ancpAnCurrentSessionGsmpVersion The actual version number of the GSMP protocol that is used in this session. This object has value 0 if ancpAnCurrentSessionState is not estab(4).	GSMP-MIBGsmpVersion	.1.3.6.1.4.1.2011.5.106.1.4.1.2
ancpAnCurrentSessionGsmpSubVersion The actual subversion number of the GSMP protocol that may be used in this session. This object has value 0 if ancpAnCurrentSessionState is not estab(4).	HUAWEI-ANCP-TC-MIBGsmpSubVersion	.1.3.6.1.4.1.2011.5.106.1.4.1.3
ancpAnCurrentSessionAnName The name of the access node used in this session. It should be the same as ancpAnSessionConfigAnName if that object is not set to zero. If ancpAnSessionConfigAnName is set to zero, then this object will contain the MAC…	GSMP-MIBGsmpNameType Type Constraints: range: 6	.1.3.6.1.4.1.2011.5.106.1.4.1.4
ancpAnCurrentSessionNasName The name of the NAS as advertised in the adjacency message. The value of this object is set to the value of the 'Sender Name' field in the header of the ANCP messages received on this session. This object has value 0 i…	GSMP-MIBGsmpNameType Type Constraints: range: 6	.1.3.6.1.4.1.2011.5.106.1.4.1.5
ancpAnCurrentSessionAnIpAddressType The type of address in ancpAnCurrentSessionAnIpAddress.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2011.5.106.1.4.1.6
ancpAnCurrentSessionAnIpAddress The IP address used for the access node. The type of this IP address attribute is determined by the value of ancpAnCurrentSessionAnIpAddressType.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2011.5.106.1.4.1.7
ancpAnCurrentSessionAnInstance The instance number used by the access node during this session. The Instance number is a 24-bit number that should be guaranteed to be unique within the recent past and to change when the link or node comes back up aft…	Unsigned32	.1.3.6.1.4.1.2011.5.106.1.4.1.8
ancpAnCurrentSessionNasInstance The instance number used by the NAS during this session. The Instance number is a 24-bit number that should be guaranteed to be unique within the recent past and to change when the link or node comes back up after going…	Unsigned32	.1.3.6.1.4.1.2011.5.106.1.4.1.9
ancpAnCurrentSessionCapabilities The common ANCP capabilities supported by the AN and NAS in this session. The object has the value 0 if no capabilities are supported or if ancpAnCurrentSessionState is not estab(4).	HUAWEI-ANCP-TC-MIBAncpSessionCapabilities Type Values: 0 topologyDiscovery 1 lineConfig 2 multicast 3 l2Oam	.1.3.6.1.4.1.2011.5.106.1.4.1.10
ancpAnCurrentSessionStartUptime The value of sysUpTime when the session came to established state. This object has value 0 if ancpAnCurrentSessionState is not estab(4).	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.106.1.4.1.11
ancpAnCurrentSessionDiscontinuityTime The value of sysUpTime on the most recent occasion at which session's counters suffered a discontinuity. If no such discontinuities have occurred since then, this object contains the same value as ancpAnCurrentSessionSt…	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.106.1.4.1.12
ancpAnCurrentSessionStatSentMessages The number of messages that have been sent in this session by the access node. All ANCP messages pertaining to this session after the session came to established state shall be counted, also including adjacency protocol…	RMON2-MIBZeroBasedCounter32	.1.3.6.1.4.1.2011.5.106.1.4.1.13
ancpAnCurrentSessionStatReceivedValidMessages The number of messages that have been received and processed in this session by the access node. All ANCP messages pertaining to this session after the session came to established state shall be counted, also including …	RMON2-MIBZeroBasedCounter32	.1.3.6.1.4.1.2011.5.106.1.4.1.14
ancpAnCurrentSessionStatDiscardedMessages The number of messages that in this session have been received and discarded for whatever reason by the access node. All ANCP messages pertaining to this session after the session came to established state shall be coun…	RMON2-MIBZeroBasedCounter32	.1.3.6.1.4.1.2011.5.106.1.4.1.15

This table configures the association of user facing
interfaces to ANCP partitions in the access node.
An entry in this table needs to be added by the agent
for each relevant user facing interface with the value
of ancpAnInterfaceConfigPartitionId set to zero at the
time of the creation of the row. A relevant user facing
interface is created whenever a row is created in the
ifTable of the IF-MIB that can be controlled by ANCP.
When such an interface is deleted from the ifTable, the
corresponding row in this table has to be removed by the
agent.
Rows should only be created by the agent when
ancpAnPartitionsUsed is set to 'true'.  If no
partitions are used, then no rows should be created in
this table.
		  The index of this table is ifIndex.

ancpAnInterfaceConfigEntry row .1.3.6.1.4.1.2011.5.106.1.5.1

This table configures the association of user facing
interfaces to ANCP partitions in the access node.
An entry in this table needs to be added by the agent
for each relevant user facing interface with the value
of ancp…

Indexes

No indexes recorded

Column	Syntax	OID
ancpAnInterfaceConfigPartitionId A partition Id associated with the related ifIndex. Upon creation of the row, the value is set to '00'H. The value of this object is persistent.	GSMP-MIBGsmpPartitionIdTyper/w Type Constraints: range: 1	.1.3.6.1.4.1.2011.5.106.1.5.1.1