HUAWEI-ANCP-AN-MIB
The MIB for implementing the access node side of the Access
-- Node Control Protocol (ANCP).
- Source file
HUAWEI-ANCP-AN-MIB- Last revised
- Identity
hwAncpAnMIB- Base OID
1.3.6.1.4.1.2011.5.106
Imported Objects
| GSMP-MIB | GsmpNameType GsmpPartitionIdType GsmpVersion |
| HUAWEI-ANCP-TC-MIB | AncpSessionCapabilities GsmpSubVersion |
| HUAWEI-MIB | huaweiMgmt |
| IF-MIB | ifIndex InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| Q-BRIDGE-MIB | VlanIdOrNone |
| RMON2-MIB | ZeroBasedCounter32 |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | mib-2 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) TimeTicks Unsigned32 zeroDotZero |
| SNMPv2-TC | RowPointer RowStatus TruthValue |
Net-SNMP examples using the huawei MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'HUAWEI-ANCP-AN-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'HUAWEI-ANCP-AN-MIB::hwAncpAnMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ANCP-AN-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ANCP-AN-MIB::hwAncpAnMIB'
Objects (55)
Showing 55 of 55 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.2011.5.106 |
||
.1.3.6.1.4.1.2011.5.106.0 |
||
.1.3.6.1.4.1.2011.5.106.1 |
||
.1.3.6.1.4.1.2011.5.106.1.1 |
||
.1.3.6.1.4.1.2011.5.106.1.2 |
||
.1.3.6.1.4.1.2011.5.106.1.3 |
||
.1.3.6.1.4.1.2011.5.106.1.3.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.2011.5.106.1.3.1.1 |
|
|
decisecondsUnsigned32
|
.1.3.6.1.4.1.2011.5.106.1.3.1.10 |
|
|
decisecondsUnsigned32
|
.1.3.6.1.4.1.2011.5.106.1.3.1.11 |
|
.1.3.6.1.4.1.2011.5.106.1.3.1.12 |
||
.1.3.6.1.4.1.2011.5.106.1.3.1.13 |
||
|
Unsigned32
|
.1.3.6.1.4.1.2011.5.106.1.3.1.14 |
|
.1.3.6.1.4.1.2011.5.106.1.3.1.15 |
||
.1.3.6.1.4.1.2011.5.106.1.3.1.16 |
||
.1.3.6.1.4.1.2011.5.106.1.3.1.17 |
||
|
Unsigned32
|
.1.3.6.1.4.1.2011.5.106.1.3.1.18 |
|
.1.3.6.1.4.1.2011.5.106.1.3.1.19 |
||
.1.3.6.1.4.1.2011.5.106.1.3.1.2 |
||
|
Unsigned32
|
.1.3.6.1.4.1.2011.5.106.1.3.1.20 |
|
.1.3.6.1.4.1.2011.5.106.1.3.1.21 |
||
.1.3.6.1.4.1.2011.5.106.1.3.1.22 |
||
|
Unsigned32
|
.1.3.6.1.4.1.2011.5.106.1.3.1.23 |
|
.1.3.6.1.4.1.2011.5.106.1.3.1.24 |
||
.1.3.6.1.4.1.2011.5.106.1.3.1.25 |
||
.1.3.6.1.4.1.2011.5.106.1.3.1.3 |
||
.1.3.6.1.4.1.2011.5.106.1.3.1.4 |
||
|
Enumeration
|
.1.3.6.1.4.1.2011.5.106.1.3.1.5 |
|
.1.3.6.1.4.1.2011.5.106.1.3.1.6 |
||
|
decisecondsUnsigned32
|
.1.3.6.1.4.1.2011.5.106.1.3.1.7 |
|
|
decisecondsUnsigned32
|
.1.3.6.1.4.1.2011.5.106.1.3.1.8 |
|
|
centisecondsUnsigned32
|
.1.3.6.1.4.1.2011.5.106.1.3.1.9 |
|
.1.3.6.1.4.1.2011.5.106.1.4 |
||
.1.3.6.1.4.1.2011.5.106.1.4.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.2011.5.106.1.4.1.1 |
|
.1.3.6.1.4.1.2011.5.106.1.4.1.10 |
||
.1.3.6.1.4.1.2011.5.106.1.4.1.11 |
||
.1.3.6.1.4.1.2011.5.106.1.4.1.12 |
||
.1.3.6.1.4.1.2011.5.106.1.4.1.13 |
||
.1.3.6.1.4.1.2011.5.106.1.4.1.14 |
||
.1.3.6.1.4.1.2011.5.106.1.4.1.15 |
||
.1.3.6.1.4.1.2011.5.106.1.4.1.2 |
||
.1.3.6.1.4.1.2011.5.106.1.4.1.3 |
||
.1.3.6.1.4.1.2011.5.106.1.4.1.4 |
||
.1.3.6.1.4.1.2011.5.106.1.4.1.5 |
||
.1.3.6.1.4.1.2011.5.106.1.4.1.6 |
||
.1.3.6.1.4.1.2011.5.106.1.4.1.7 |
||
|
Unsigned32
|
.1.3.6.1.4.1.2011.5.106.1.4.1.8 |
|
|
Unsigned32
|
.1.3.6.1.4.1.2011.5.106.1.4.1.9 |
|
.1.3.6.1.4.1.2011.5.106.1.5 |
||
.1.3.6.1.4.1.2011.5.106.1.5.1 |
||
.1.3.6.1.4.1.2011.5.106.1.5.1.1 |
||
.1.3.6.1.4.1.2011.5.106.2 |
||
.1.3.6.1.4.1.2011.5.106.2.1 |
||
.1.3.6.1.4.1.2011.5.106.2.2 |
Dependencies (22) 10 direct · 12 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- ATM-TC-MIBrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- INET-ADDRESS-MIBrfc
- RMON-MIBrfc
- RFC-1212rfc
- RFC1155-SMIrfc
- RFC1213-MIBrfc
- RFC1271-MIBrfc
- TOKEN-RING-RMON-MIBrfc
- RMON2-MIBrfc
- GSMP-MIBrfc
- HUAWEI-MIBhuawei
- HUAWEI-ANCP-TC-MIBhuawei
- BRIDGE-MIBrfc
- P-BRIDGE-MIBrfc
- SNMP-FRAMEWORK-MIBrfc
- Q-BRIDGE-MIBrfc
- HUAWEI-ANCP-AN-MIBhuaweiselected
Conformance Groups (7)
|
ancpAnNextSessionId ancpAnSessionConfigRowStatus ancpAnSessionConfigGsmpVersion ancpAnSessionConfigGsmpSubVersion ancpAnSessionConfigEncapsulationType ancpAnSessionConfigCapabilities ancpAnSessionConfigAliveTimer ancpAnSessionConfigPortReportShaper ancpAnSessionConfigAggregateReportShaper ancpAnSessionConfigTransportRetryTimer ancpAnSessionConfigAncpRetryTimer ancpAnSessionConfigAnName ancpAnSessionConfigPartitionId ancpAnSessionConfigWindowSize ancpAnSessionConfigNasIpAddressType ancpAnSessionConfigNasIpAddress ancpAnSessionConfigEncapPortNumber ancpAnSessionConfigNotifyDnEnable ancpAnSessionConfigNotifyUpEnable
These objects apply to the configuration of ANCP
sessions in access nodes. |
.1.3.6.1.4.1.2011.5.106.2.1.1
|
|
|
This object contains the ifIndex of an interface defined
in IF-MIB. If an ANCP session must be associated with an IP interface, then this group must be supported. This group also must be supported together with the ancpAnRelatedEntityGroup in case the ANCP session is to be associated with an ATM PVC. |
.1.3.6.1.4.1.2011.5.106.2.1.2
|
|
|
This object contains the name of an object instance
uniquely identifying a lower layer entity. If an ANCP session must be associated with an ATM PVC, then this group together with ancpAnRelatedInterfaceGroup must be supported. |
.1.3.6.1.4.1.2011.5.106.2.1.3
|
|
|
These objects contains all VLAN-related configuration when
the ANCP session is associated with a particular VLAN. If an ANCP session must be associated with a VLAN (or VLAN stack), then this group must be supported. |
.1.3.6.1.4.1.2011.5.106.2.1.4
|
|
|
ancpAnCurrentSessionState ancpAnCurrentSessionGsmpVersion ancpAnCurrentSessionGsmpSubVersion ancpAnCurrentSessionAnName ancpAnCurrentSessionNasName ancpAnCurrentSessionAnIpAddressType ancpAnCurrentSessionAnIpAddress ancpAnCurrentSessionAnInstance ancpAnCurrentSessionNasInstance ancpAnCurrentSessionCapabilities ancpAnCurrentSessionStartUptime ancpAnCurrentSessionDiscontinuityTime ancpAnCurrentSessionStatSentMessages ancpAnCurrentSessionStatReceivedValidMessages ancpAnCurrentSessionStatDiscardedMessages
These objects show the operational state of all ANCP
sessions configured in the access node. |
.1.3.6.1.4.1.2011.5.106.2.1.5
|
|
|
These objects are used to assign user facing interface to
partitions. |
.1.3.6.1.4.1.2011.5.106.2.1.6
|
|
|
These objects are used to enable or disable the generation
of notifications by the access node about changes in the state of ANCP sessions. |
.1.3.6.1.4.1.2011.5.106.2.1.7
|
Compliance Statements (1)
OID
.1.3.6.1.4.1.2011.5.106.2.2.1The compliance statement for agents that support
the ANCP MIB module for access nodes.
the ANCP MIB module for access nodes.
Required groups
| mandatory | ancpAnConfigGroup | |
| mandatory | ancpAnCurrentGroup | |
| mandatory | ancpAnInterfaceGroup | |
| mandatory | ancpAnNotificationsGroup |
Notifications / Traps (2)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.4.1.2011.5.106.0.1 |
This notification is generated whenever an ANCP session
goes down. A session can go down for several reasons: 1) The ANCP session can be deleted by a manager from the ancpAnSessionConfigTable, and hence it will also be removed from the ancpAnCurrentSessionTable. 2) The session can go operational down due to some malfunction in the network, the AN, or the NAS. In this case, the ANCP session will be still in the ancpAnSessionConfigTable and ancpAnCurrentSessionTable, but the ancpAnCurrentSessionState moves from the estab state to another state. This notification is only generated when ancpAnSessionConfigNotifyDnEnable of this session is set to true. |
|
.1.3.6.1.4.1.2011.5.106.0.2 |
This notification is generated when an ANCP session enters
the estab state as given by ancpAnCurrentSessionState. Since ancpAnCurrentSessionAnInstance identifies the ANCP session uniquely the other attributes can be derived from this attribute. This notification is only generated when ancpAnSessionConfigNotifyUpEnable of this session is set to true. |