HPR-MIB Table View

The ANR Routing table provides a means of correlating an
incoming ANR label (i.e., one assigned by this node) with the
TG over which a packet containing the label will be forwarded.
When the ANR label identifies a local NCE, the hprAnrOutTgDest
and hprAnrOutTgNum objects have no meaning.  The table also
contains an object to count the number of packets received
with a given ANR label.

hprAnrRoutingEntry row .1.3.6.1.2.1.34.6.1.2.4.1

The ANR label is used to index this table.

Indexes

hprAnrLabel

Column	Syntax	OID
hprAnrLabel The first ANR label in an incoming packet.	OctetString Constraints: range: 1-8	.1.3.6.1.2.1.34.6.1.2.4.1.1
hprAnrType An object indicating whether an ANR label assigned by this node identifies a local NCE or a TG on which outgoing packets are forwarded. nce(1) - the ANR label identifies a local NCE. In this …	Enumeration Enumerated Values: 1 nce 2 tg	.1.3.6.1.2.1.34.6.1.2.4.1.2
hprAnrOutTgDest Destination node for the TG over which packets with this ANR label are forwarded. This is the fully qualified name of an APPN network node or end node, formatted according to the SnaControlPointName textual convention.…	OctetString Constraints: range: 3-17 range: 0-0	.1.3.6.1.2.1.34.6.1.2.4.1.3
hprAnrOutTgNum Number of the TG over which packets with this ANR label are forwarded. If the ANR label identifies a local NCE, then this object returns the value 0, since 0 is not a valid TG number for a TG that supports HPR. …	Integer32 Constraints: range: 0-255	.1.3.6.1.2.1.34.6.1.2.4.1.4
hprAnrPacketsReceived The count of packets received with this ANR label as their first label. A Management Station can detect discontinuities in this counter by monitoring the hprAnrCounterDisconTime object in the same row.	ANR packetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.34.6.1.2.4.1.5
hprAnrCounterDisconTime The value of the sysUpTime object when the hprAnrPacketsReceived counter for this ANR label last experienced a discontinuity. This will be the more recent of two times: the time at which the ANR label was associated w…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.2.1.34.6.1.2.4.1.6

The Network Connection Endpoint (NCE) table.

hprNceEntry row .1.3.6.1.2.1.34.6.1.3.1.1

The NCE ID is used to index this table.

Indexes

hprNceId

Column	Syntax	OID
hprNceId The Network Connection Endpoint (NCE) ID. NCEs identify Control Points (Cp), Logical Units (Lu), HPR Boundary Functions (Bf) and Route Setup (Rs) Functions. A value for this object can be retrieved from any of the fol…	OctetString Constraints: range: 1-8	.1.3.6.1.2.1.34.6.1.3.1.1.1
hprNceType A bit string identifying the function types provided by this Network Connection Endpoint (NCE).	HprNceTypes Type Values: 0 controlPoint 1 logicalUnit 2 boundaryFunction 3 routeSetup	.1.3.6.1.2.1.34.6.1.3.1.1.2
hprNceDefault A bit string identifying the function types for which this Network Connection Endpoint (NCE) is the default NCE. While default NCEs are not explicitly defined in the architecture, some implementations provide them; for…	HprNceTypes Type Values: 0 controlPoint 1 logicalUnit 2 boundaryFunction 3 routeSetup	.1.3.6.1.2.1.34.6.1.3.1.1.3
hprNceInstanceId The NCE instance identifier (NCEII) identifying the current instance of this NCE. An NCEII is used to denote different instances (IPLs) of an NCE component. Each time an NCE is activated (IPL'd), it acquires a differe…	OctetString Constraints: range: 4-4	.1.3.6.1.2.1.34.6.1.3.1.1.4

The RTP Connection table

hprRtpEntry row .1.3.6.1.2.1.34.6.1.4.2.1

The local NCE ID and local TCID are used to index this
table.

Indexes

hprRtpLocNceId hprRtpLocTcid

Column	Syntax	OID
hprRtpLocNceId The local Network Connection Endpoint (NCE) ID of this RTP connection. NCEs identify CPs, LUs, Boundary Functions (BFs), and Route Setup (RS) components. A value for this object can be retrieved from any of the follow…	OctetString Constraints: range: 1-8	.1.3.6.1.2.1.34.6.1.4.2.1.1
hprRtpLocTcid The local TCID of this RTP connection. A value for this object can be retrieved from either the appnIsInRtpTcid object or the appnIsRtpTcid object the APPN MIB; in each case this value identifies a row in this table co…	OctetString Constraints: range: 8-8	.1.3.6.1.2.1.34.6.1.4.2.1.2
hprRtpRemCpName Administratively assigned network name for the remote node of this RTP connection.	APPN-MIBSnaControlPointName Type Constraints: range: 3..17	.1.3.6.1.2.1.34.6.1.4.2.1.3
hprRtpRemNceId The remote Network Connection Endpoint (NCE) of this RTP connection. NCEs identify CPs, LUs, Boundary Functions (BFs), and Route Setup (RS) components.	OctetString Constraints: range: 1-8	.1.3.6.1.2.1.34.6.1.4.2.1.4
hprRtpRemTcid The remote TCID of this RTP connection.	OctetString Constraints: range: 8-8	.1.3.6.1.2.1.34.6.1.4.2.1.5
hprRtpPathSwitchTrigger Object by which a Management Station can trigger an operator- requested path switch, by setting the value to switchPathNow(2). Setting this object to switchPathNow(2) triggers a path switch even if its previous value w…	Enumerationr/w Enumerated Values: 1 ready 2 switchPathNow	.1.3.6.1.2.1.34.6.1.4.2.1.6
hprRtpRscv The forward Route Selection Control Vector for this RTP connection. The format of this vector is described in SNA Formats. The value returned in this object during a path switch is implementation-depende…	OctetString Constraints: range: 0-255	.1.3.6.1.2.1.34.6.1.4.2.1.7
hprRtpTopic The topic for this RTP connection. This is used to indicate the Class of Service.	OctetString Constraints: range: 8-8	.1.3.6.1.2.1.34.6.1.4.2.1.8
hprRtpState The state of the RTP connection, from the perspective of the local RTP protocol machine: rtpListening - connection open; waiting for other end to call in rtpCalling …	Enumeration Enumerated Values: 1 rtpListening 2 rtpCalling 3 rtpConnected 4 rtpPathSwitching 5 rtpDisconnecting 99 other	.1.3.6.1.2.1.34.6.1.4.2.1.9
hprRtpUpTime The length of time the RTP connection has been up, measured in 1/100ths of a second.	1/100ths of a secondSNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.34.6.1.4.2.1.10
hprRtpLivenessTimer The value of the liveness (ALIVE) timer of this RTP connection, in units of 1/100th of a second. When this timer expires and no packet has arrived from the partner since it was last set, packets with Status Request ind…	1/100ths of a secondSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.34.6.1.4.2.1.11
hprRtpShortReqTimer The value of the RTP SHORT_REQ timer, in units of 1/100 of a second. This timer represents the maximum time that a sender waits for a reply from a receiver.	1/100ths of a secondSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.34.6.1.4.2.1.12
hprRtpPathSwTimer The length of time that RTP should attempt a path switch for a connection, in units of 1/100th of a second.	1/100ths of a secondSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.34.6.1.4.2.1.13
hprRtpLivenessTimeouts The count of liveness timeouts for this RTP connection.	liveness timeoutsHprRtpCounter	.1.3.6.1.2.1.34.6.1.4.2.1.14
hprRtpShortReqTimeouts The count of short request timeouts for this RTP connection.	short request timeoutsHprRtpCounter	.1.3.6.1.2.1.34.6.1.4.2.1.15
hprRtpMaxSendRate The high-water mark for this RTP connection's send rate, in units of bytes per second. This is the high-water mark for the entire life of the connection, not just the high-water mark for the connection's current path. …	bytes per secondSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.34.6.1.4.2.1.16
hprRtpMinSendRate The low-water mark for this RTP connection's send rate, in units of bytes per second. This is the low-water mark for the entire life of the connection, not just the low-water mark for the connection's current path. …	bytes per secondSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.34.6.1.4.2.1.17
hprRtpCurSendRate The current send rate for this RTP connection, in units of bytes per second. For more details on this and other parameters related to HPR, see the High Performance Routing Architecture Reference.	bytes per secondSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.34.6.1.4.2.1.18
hprRtpSmRdTripDelay The smoothed round trip delay for this RTP connection, in units of 1/1000th of a second (ms). For more details on this and other parameters related to HPR, see the High Performance Routing Architecture Re…	1/1000ths of a secondSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.34.6.1.4.2.1.19
hprRtpSendPackets The count of packets successfully sent on this RTP connection.	RTP packetsHprRtpCounter	.1.3.6.1.2.1.34.6.1.4.2.1.20
hprRtpRecvPackets The count of packets received on this RTP connection. The counter is incremented only once if duplicate copies of a packet are received.	RTP packetsHprRtpCounter	.1.3.6.1.2.1.34.6.1.4.2.1.21
hprRtpSendBytes The count of bytes sent on this RTP connection. Both RTP Transport Header (THDR) bytes and data bytes are included in this count.	bytesHprRtpCounter	.1.3.6.1.2.1.34.6.1.4.2.1.22
hprRtpRecvBytes The count of bytes received on this RTP connection. Both RTP Transport Header (THDR) bytes and data bytes are included in this count.	bytesHprRtpCounter	.1.3.6.1.2.1.34.6.1.4.2.1.23
hprRtpRetrPackets The count of packets retransmitted on this RTP connection.	RTP packetsHprRtpCounter	.1.3.6.1.2.1.34.6.1.4.2.1.24
hprRtpPacketsDiscarded The count of packets received on this RTP connection and then discarded. A packet may be discarded because it is determined to be a duplicate, or for other reasons.	RTP packetsHprRtpCounter	.1.3.6.1.2.1.34.6.1.4.2.1.25
hprRtpDetectGaps The count of gaps detected on this RTP connection.	gapsHprRtpCounter	.1.3.6.1.2.1.34.6.1.4.2.1.26
hprRtpRateReqSends The count of Rate Requests sent on this RTP connection.	rate requestsHprRtpCounter	.1.3.6.1.2.1.34.6.1.4.2.1.27
hprRtpOkErrPathSws The count of successful path switch attempts for this RTP connection due to errors.	path switch attemptsHprRtpCounter	.1.3.6.1.2.1.34.6.1.4.2.1.28
hprRtpBadErrPathSws The count of unsuccessful path switches for this RTP connection due to errors.	path switch attemptsHprRtpCounter	.1.3.6.1.2.1.34.6.1.4.2.1.29
hprRtpOkOpPathSws The count of successful path switches for this RTP connection due to operator requests.	path switchesHprRtpCounter	.1.3.6.1.2.1.34.6.1.4.2.1.30
hprRtpBadOpPathSws The count of unsuccessful path switches for this RTP connection due to operator requests. This counter is not incremented by an implementation that does not support operator-requested path switches, even if a Managemen…	path switchesHprRtpCounter	.1.3.6.1.2.1.34.6.1.4.2.1.31
hprRtpCounterDisconTime The value of the sysUpTime object when the counters for this RTP connection last experienced a discontinuity. This will be the more recent of two times: the time at which the connection was established …	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.2.1.34.6.1.4.2.1.32

RTP Connection Status Table:  This table contains historical
information on RTP connections.  An entry is created in this
table when a path switch is completed, either successfully or
unsuccessfully.

hprRtpStatusEntry row .1.3.6.1.2.1.34.6.1.4.3.1

This table is indexed by local NCE ID, local TCID, and an
integer hprRtpStatusIndex. Thus the primary grouping of table
rows is by RTP connection, with the multiple entries for a
given RTP connection ordered by time.

Indexes

hprRtpStatusLocNceId hprRtpStatusLocTcid hprRtpStatusIndex

Column	Syntax	OID
hprRtpStatusLocNceId The local Network Connection Endpoint (NCE) of this RTP connection. NCEs identify CPs, LUs, Boundary Functions (BFs), and Route Setup (RS) components.	OctetString Constraints: range: 1-8	.1.3.6.1.2.1.34.6.1.4.3.1.1
hprRtpStatusLocTcid The local TCID of this RTP connection.	OctetString Constraints: range: 8-8	.1.3.6.1.2.1.34.6.1.4.3.1.2
hprRtpStatusIndex Table index. This value begins at one and is incremented when a new entry is added to the table. It is an implementation choice whether to run a single counter for all entries in the table, or to run a …	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.2.1.34.6.1.4.3.1.3
hprRtpStatusStartTime The time when the path switch began.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.2.1.34.6.1.4.3.1.4
hprRtpStatusEndTime The time when the path switch was ended, either successfully or unsuccessfully.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.2.1.34.6.1.4.3.1.5
hprRtpStatusRemCpName Administratively assigned network name for the remote node of this RTP connection.	APPN-MIBSnaControlPointName Type Constraints: range: 3..17	.1.3.6.1.2.1.34.6.1.4.3.1.6
hprRtpStatusRemNceId The remote Network Connection Endpoint (NCE) of this RTP connection. NCEs identify CPs, LUs, Boundary Functions (BFs), and Route Setup (RS) components.	OctetString Constraints: range: 1-8	.1.3.6.1.2.1.34.6.1.4.3.1.7
hprRtpStatusRemTcid The remote TCID of this RTP connection.	OctetString Constraints: range: 8-8	.1.3.6.1.2.1.34.6.1.4.3.1.8
hprRtpStatusNewRscv The new Route Selection Control Vector for this RTP connection. A zero-length string indicates that no value is available, perhaps because the implementation does not save RSCVs.	OctetString Constraints: range: 0-255	.1.3.6.1.2.1.34.6.1.4.3.1.9
hprRtpStatusOldRscv The old Route Selection Control Vector for this RTP connection. A zero-length string indicates that no value is available, perhaps because the implementation does not save RSCVs.	OctetString Constraints: range: 0-255	.1.3.6.1.2.1.34.6.1.4.3.1.10
hprRtpStatusCause The reason for the path switch: other(1) - Reason other than those listed below, rtpConnFail(2) - RTP connection failure detected, locLinkFail(3) - Local link failure, remLinkFail(4) - Remote link f…	Enumeration Enumerated Values: 1 other 2 rtpConnFail 3 locLinkFail 4 remLinkFail 5 operRequest	.1.3.6.1.2.1.34.6.1.4.3.1.11
hprRtpStatusLastAttemptResult The result of the last completed path switch attempt. If the path switch is aborted in the middle of a path switch attempt because the path switch timer expires, the result of the previous path switch attempt is report…	Enumeration Enumerated Values: 1 successful 2 initiatorMoving 3 directorySearchFailed 4 rscvCalculationFailed 5 negativeRouteSetupReply 6 backoutRouteSetupReply 7 timeoutDuringFirstAttempt 8 otherUnsuccessful	.1.3.6.1.2.1.34.6.1.4.3.1.12