HPR-MIB

        This is the MIB module for objects used to
manage network devices with HPR capabilities.
    
Source file
HPR-MIB
Last revised
Identity
hprMIB
Base OID
1.3.6.1.2.1.34.6
Imported Objects
APPN-MIB SnaControlPointName
SNA-NAU-MIB snanauMIB
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Gauge32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) TimeTicks Unsigned32
SNMPv2-TC DateAndTime DisplayString TEXTUAL-CONVENTION (no object page) TimeStamp
Net-SNMP examples using the rfc MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'HPR-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'HPR-MIB::hprMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPR-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPR-MIB::hprMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (80)
.1.3.6.1.2.1.34.6
.1.3.6.1.2.1.34.6.1
.1.3.6.1.2.1.34.6.1.1
.1.3.6.1.2.1.34.6.1.1.1
Enumeration
.1.3.6.1.2.1.34.6.1.1.2
.1.3.6.1.2.1.34.6.1.2
.1.3.6.1.2.1.34.6.1.2.1
Enumeration
.1.3.6.1.2.1.34.6.1.2.2
.1.3.6.1.2.1.34.6.1.2.3
.1.3.6.1.2.1.34.6.1.2.4
.1.3.6.1.2.1.34.6.1.2.4.1
OctetString
.1.3.6.1.2.1.34.6.1.2.4.1.1
Enumeration
.1.3.6.1.2.1.34.6.1.2.4.1.2
OctetString
.1.3.6.1.2.1.34.6.1.2.4.1.3
Integer32
.1.3.6.1.2.1.34.6.1.2.4.1.4
.1.3.6.1.2.1.34.6.1.2.4.1.5
.1.3.6.1.2.1.34.6.1.2.4.1.6
.1.3.6.1.2.1.34.6.1.3
.1.3.6.1.2.1.34.6.1.3.1
.1.3.6.1.2.1.34.6.1.3.1.1
OctetString
.1.3.6.1.2.1.34.6.1.3.1.1.1
.1.3.6.1.2.1.34.6.1.3.1.1.2
.1.3.6.1.2.1.34.6.1.3.1.1.3
OctetString
.1.3.6.1.2.1.34.6.1.3.1.1.4
.1.3.6.1.2.1.34.6.1.4
.1.3.6.1.2.1.34.6.1.4.1
RTP connection setupsSNMPv2-SMICounter32
.1.3.6.1.2.1.34.6.1.4.1.1
Enumeration
.1.3.6.1.2.1.34.6.1.4.1.2
.1.3.6.1.2.1.34.6.1.4.1.3
.1.3.6.1.2.1.34.6.1.4.2
.1.3.6.1.2.1.34.6.1.4.2.1
OctetString
.1.3.6.1.2.1.34.6.1.4.2.1.1
1/100ths of a secondSNMPv2-SMITimeTicks
.1.3.6.1.2.1.34.6.1.4.2.1.10
1/100ths of a secondSNMPv2-SMIUnsigned32
.1.3.6.1.2.1.34.6.1.4.2.1.11
1/100ths of a secondSNMPv2-SMIUnsigned32
.1.3.6.1.2.1.34.6.1.4.2.1.12
1/100ths of a secondSNMPv2-SMIUnsigned32
.1.3.6.1.2.1.34.6.1.4.2.1.13
liveness timeoutsHprRtpCounter
.1.3.6.1.2.1.34.6.1.4.2.1.14
short request timeoutsHprRtpCounter
.1.3.6.1.2.1.34.6.1.4.2.1.15
bytes per secondSNMPv2-SMIGauge32
.1.3.6.1.2.1.34.6.1.4.2.1.16
bytes per secondSNMPv2-SMIGauge32
.1.3.6.1.2.1.34.6.1.4.2.1.17
bytes per secondSNMPv2-SMIGauge32
.1.3.6.1.2.1.34.6.1.4.2.1.18
1/1000ths of a secondSNMPv2-SMIGauge32
.1.3.6.1.2.1.34.6.1.4.2.1.19
OctetString
.1.3.6.1.2.1.34.6.1.4.2.1.2
RTP packetsHprRtpCounter
.1.3.6.1.2.1.34.6.1.4.2.1.20
RTP packetsHprRtpCounter
.1.3.6.1.2.1.34.6.1.4.2.1.21
.1.3.6.1.2.1.34.6.1.4.2.1.22
.1.3.6.1.2.1.34.6.1.4.2.1.23
RTP packetsHprRtpCounter
.1.3.6.1.2.1.34.6.1.4.2.1.24
RTP packetsHprRtpCounter
.1.3.6.1.2.1.34.6.1.4.2.1.25
.1.3.6.1.2.1.34.6.1.4.2.1.26
rate requestsHprRtpCounter
.1.3.6.1.2.1.34.6.1.4.2.1.27
path switch attemptsHprRtpCounter
.1.3.6.1.2.1.34.6.1.4.2.1.28
path switch attemptsHprRtpCounter
.1.3.6.1.2.1.34.6.1.4.2.1.29
.1.3.6.1.2.1.34.6.1.4.2.1.3
path switchesHprRtpCounter
.1.3.6.1.2.1.34.6.1.4.2.1.30
path switchesHprRtpCounter
.1.3.6.1.2.1.34.6.1.4.2.1.31
.1.3.6.1.2.1.34.6.1.4.2.1.32
OctetString
.1.3.6.1.2.1.34.6.1.4.2.1.4
OctetString
.1.3.6.1.2.1.34.6.1.4.2.1.5
Enumeration
.1.3.6.1.2.1.34.6.1.4.2.1.6
OctetString
.1.3.6.1.2.1.34.6.1.4.2.1.7
OctetString
.1.3.6.1.2.1.34.6.1.4.2.1.8
Enumeration
.1.3.6.1.2.1.34.6.1.4.2.1.9
.1.3.6.1.2.1.34.6.1.4.3
.1.3.6.1.2.1.34.6.1.4.3.1
OctetString
.1.3.6.1.2.1.34.6.1.4.3.1.1
OctetString
.1.3.6.1.2.1.34.6.1.4.3.1.10
Enumeration
.1.3.6.1.2.1.34.6.1.4.3.1.11
Enumeration
.1.3.6.1.2.1.34.6.1.4.3.1.12
OctetString
.1.3.6.1.2.1.34.6.1.4.3.1.2
Unsigned32
.1.3.6.1.2.1.34.6.1.4.3.1.3
.1.3.6.1.2.1.34.6.1.4.3.1.4
.1.3.6.1.2.1.34.6.1.4.3.1.5
.1.3.6.1.2.1.34.6.1.4.3.1.6
OctetString
.1.3.6.1.2.1.34.6.1.4.3.1.7
OctetString
.1.3.6.1.2.1.34.6.1.4.3.1.8
OctetString
.1.3.6.1.2.1.34.6.1.4.3.1.9
.1.3.6.1.2.1.34.6.2
.1.3.6.1.2.1.34.6.2.1
.1.3.6.1.2.1.34.6.2.2
Dependencies (6) 5 direct · 1 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-TCrfc
  3. IANAifType-MIBrfc
  4. SNMPv2-CONFrfc
  5. SNA-NAU-MIBrfc
  6. APPN-MIBrfc
  7. HPR-MIBrfcselected
Type Definitions (2)
Bits
controlPoint(0)
logicalUnit(1)
boundaryFunction(2)
routeSetup(3)
Unsigned32
Conformance Groups (4)
A collection of objects providing the instrumentation of HPR
general information and capabilities.
.1.3.6.1.2.1.34.6.2.2.1
A collection of objects providing instrumentation for the
node's ANR routing.
.1.3.6.1.2.1.34.6.2.2.2
A collection of objects providing information on the users of
the HPR transport known to the node.
.1.3.6.1.2.1.34.6.2.2.3
A collection of objects providing the instrumentation for RTP
connection end points.
.1.3.6.1.2.1.34.6.2.2.4
Compliance Statements (1)

OID .1.3.6.1.2.1.34.6.2.1.1
The compliance statement for the SNMPv2 entities that
implement the HPR MIB.
Required groups
mandatory hprGlobalConfGroup
mandatory hprAnrRoutingConfGroup
mandatory hprTransportUserConfGroup
optional hprRtpConfGroup The hprRtpConfGroup is mandatory for HPR implementations
supporting the HPR transport tower.