HPICF-SAVI-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
15

hpicfSaviObjectsPortTable

table
.1.3.6.1.4.1.11.2.14.11.5.2.1.1.1 · 1 row entry · 4 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfSaviObjectsPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPICF-SAVI-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPICF-SAVI-MIB::hpicfSaviObjectsPortTable' 
The table containing hpicfSAVI parameters of each anchor.
hpicfSaviObjectsPortEntry row .1.3.6.1.4.1.11.2.14.11.5.2.1.1.1.1
An entry containing hpicfSAVI running parameters of an anchor.
Indexes
Column Syntax OID
hpicfSaviObjectsPortIPVersion
The IP version.
INET-ADDRESS-MIBInetVersion
Type Values:
0unknown
1ipv4
2ipv6
 .1.3.6.1.4.1.11.2.14.11.5.2.1.1.1.1.1
hpicfSaviObjectsPortIfIndex
The index value that uniquely identifies the interface to
which this entry is applicable. The interface identified by
a particular value of this index is the same interface as
identified by the same value of the IF-MIB…
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.11.2.14.11.5.2.1.1.1.1.2
hpicfSaviObjPortDhcpTrustAttr
The DHCP trust attribute of the port.
enable(1), the attribute is set.
disable(2), the attribute is not set.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.11.2.14.11.5.2.1.1.1.1.3
hpicfSaviObjectsPortFilteringNum
The max filtering number of the Port.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.2.1.1.1.1.4

hpicfSaviObjectsBindingTable

table
.1.3.6.1.4.1.11.2.14.11.5.2.1.1.2 · 1 row entry · 7 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfSaviObjectsBindingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPICF-SAVI-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPICF-SAVI-MIB::hpicfSaviObjectsBindingTable' 
The table containing the state of binding
between source address and anchor.
hpicfSaviObjectsBindingEntry row .1.3.6.1.4.1.11.2.14.11.5.2.1.1.2.1
An entry containing the state of binding between source
address and anchor.
Entries are keyed on the source IP address type,
binding type, anchor, and source IP address.
Indexes
Column Syntax OID
hpicfSaviObjBindingIpAddrType
IP address type of the binding source IP.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.14.11.5.2.1.1.2.1.1
hpicfSaviObjectsBindingType
IP address assignment methods.
Enumeration
Enumerated Values:
1manual
2slaac
3dhcp
4send
 .1.3.6.1.4.1.11.2.14.11.5.2.1.1.2.1.2
hpicfSaviObjectsBindingIfIndex
The index value that uniquely identifies the interface to
which this entry is applicable. The interface identified by
a particular value of this index is the same interface as
identified by the same value of the IF-MIB…
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.11.2.14.11.5.2.1.1.2.1.3
hpicfSaviObjectsBindingIpAddress
The binding source IP address.
OctetString
Constraints:
range: 4-4
range: 16-16
 .1.3.6.1.4.1.11.2.14.11.5.2.1.1.2.1.4
hpicfSaviObjectsBindingMacAddr
The binding source mac address.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.11.2.14.11.5.2.1.1.2.1.5
hpicfSaviObjectsBindingLifetime
The remaining lifetime of the entry.
TimeInterval is defined in RFC 2579, it's a period of time,
measured in units of 0.01 seconds,
and the value is (0..2147483647).
If hpicfSaviObjectsBindingType=manual, a value of 214…
SNMPv2-TCTimeInterval
Type Constraints:
range: 0..2147483647
Description:
A period of time, measured in units of 0.01 seconds.
 .1.3.6.1.4.1.11.2.14.11.5.2.1.1.2.1.6
hpicfSaviObjectsBindingRowStatus
The status of this row, by which new entries may be
created, or old entries deleted from this table.
An Entry can be created or deleted only when
hpicfSaviObjectsBindingType=manual. Row statuses
createAndWait(5), notRe…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.14.11.5.2.1.1.2.1.7

hpicfSaviObjectsFilteringTable

table
.1.3.6.1.4.1.11.2.14.11.5.2.1.1.3 · 1 row entry · 4 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfSaviObjectsFilteringTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPICF-SAVI-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPICF-SAVI-MIB::hpicfSaviObjectsFilteringTable' 
The table containing the filtering entries.
hpicfSaviObjectsFilteringEntry row .1.3.6.1.4.1.11.2.14.11.5.2.1.1.3.1
An entry containing the filtering parameters.
Entries are keyed on the source IP address type,
anchor, and source IP address.
Indexes
Column Syntax OID
hpicfSaviObjFilteringIpAddrType
IP address type of the filtering source IP.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.14.11.5.2.1.1.3.1.1
hpicfSaviObjectsFilteringIfIndex
The index value that uniquely identifies the interface to
which this entry is applicable. The interface identified by
a particular value of this index is the same interface as
identified by the same value of the IF-MIB…
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.11.2.14.11.5.2.1.1.3.1.2
hpicfSaviObjFilteringIpAddr
The filtering source IP address.
OctetString
Constraints:
range: 4-4
range: 16-16
 .1.3.6.1.4.1.11.2.14.11.5.2.1.1.3.1.3
hpicfSaviObjectsFilteringMacAddr
The filtering source mac address.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.11.2.14.11.5.2.1.1.3.1.4