HPICF-SAVI-MIB

        This MIB Module is designed to support the configuration 
and monitoring of DHCPv6 Snooping protocol. This MIB module 
was based off the IETF draft of SAVI mib, which was designed 
to support configuration and monitoring of SAVI protocol by 
Changging An(acq@cernet.edu.cn) and Jiahai Yang(yang@cernet.edu.cu), 
https://tools.ietf.org/html/draft-an-savi-mib-02.\u201d.
    
Source file
HPICF-SAVI-MIB
Last revised
Identity
hpicfSaviMIB
Base OID
1.3.6.1.4.1.11.2.14.11.5.2.1
Imported Objects
HP-ICF-OID hpSwitchExperimental
IF-MIB InterfaceIndex
INET-ADDRESS-MIB InetAddress InetAddressType InetVersion
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC MacAddress RowStatus TimeInterval
Net-SNMP examples using the hp MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'HPICF-SAVI-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'HPICF-SAVI-MIB::hpicfSaviMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPICF-SAVI-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPICF-SAVI-MIB::hpicfSaviMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (26)
.1.3.6.1.4.1.11.2.14.11.5.2.1
.1.3.6.1.4.1.11.2.14.11.5.2.1.1
.1.3.6.1.4.1.11.2.14.11.5.2.1.1.1
.1.3.6.1.4.1.11.2.14.11.5.2.1.1.1.1
.1.3.6.1.4.1.11.2.14.11.5.2.1.1.1.1.1
.1.3.6.1.4.1.11.2.14.11.5.2.1.1.1.1.2
Enumeration
.1.3.6.1.4.1.11.2.14.11.5.2.1.1.1.1.3
.1.3.6.1.4.1.11.2.14.11.5.2.1.1.1.1.4
.1.3.6.1.4.1.11.2.14.11.5.2.1.1.2
.1.3.6.1.4.1.11.2.14.11.5.2.1.1.2.1
.1.3.6.1.4.1.11.2.14.11.5.2.1.1.2.1.1
Enumeration
.1.3.6.1.4.1.11.2.14.11.5.2.1.1.2.1.2
.1.3.6.1.4.1.11.2.14.11.5.2.1.1.2.1.3
OctetString
.1.3.6.1.4.1.11.2.14.11.5.2.1.1.2.1.4
.1.3.6.1.4.1.11.2.14.11.5.2.1.1.2.1.5
.1.3.6.1.4.1.11.2.14.11.5.2.1.1.2.1.6
.1.3.6.1.4.1.11.2.14.11.5.2.1.1.2.1.7
.1.3.6.1.4.1.11.2.14.11.5.2.1.1.3
.1.3.6.1.4.1.11.2.14.11.5.2.1.1.3.1
.1.3.6.1.4.1.11.2.14.11.5.2.1.1.3.1.1
.1.3.6.1.4.1.11.2.14.11.5.2.1.1.3.1.2
OctetString
.1.3.6.1.4.1.11.2.14.11.5.2.1.1.3.1.3
.1.3.6.1.4.1.11.2.14.11.5.2.1.1.3.1.4
.1.3.6.1.4.1.11.2.14.11.5.2.1.2
.1.3.6.1.4.1.11.2.14.11.5.2.1.2.1
.1.3.6.1.4.1.11.2.14.11.5.2.1.2.2
Dependencies (8) 6 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Conformance Groups (3)
The if group contains objects corresponding to the hpicfSavi running
parameters of each anchor.
.1.3.6.1.4.1.11.2.14.11.5.2.1.2.2.1
The binding group contains the binding
information of anchor and source ip address.
.1.3.6.1.4.1.11.2.14.11.5.2.1.2.2.2
The filtering group contains the filtering
information of anchor and source ip address.
.1.3.6.1.4.1.11.2.14.11.5.2.1.2.2.3
Compliance Statements (1)

OID .1.3.6.1.4.1.11.2.14.11.5.2.1.2.1.1
The compliance statement for entities which implement hpicfSAVI
protocol.
Required groups