HP-ICF-IPv6-DYNAMIC-LOCKDOWN-MIB

        This MIB module contains HP proprietary
objects for managing DHCPV6 Snooping.
    
Source file
HP-ICF-IPv6-DYNAMIC-LOCKDOWN-MIB
Last revised
Identity
hpicfIpv6Lockdown
Base OID
1.3.6.1.4.1.11.2.14.11.5.1.103
Imported Objects
HP-ICF-OID hpSwitch
HPICF-SAVI-MIB hpicfSaviObjectsFilteringEntry
IF-MIB ifIndex InterfaceIndex
INET-ADDRESS-MIB InetAddress InetAddressType
Q-BRIDGE-MIB VlanIndex
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page)
SNMPv2-TC MacAddress TruthValue
Net-SNMP examples using the hp MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'HP-ICF-IPv6-DYNAMIC-LOCKDOWN-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'HP-ICF-IPv6-DYNAMIC-LOCKDOWN-MIB::hpicfIpv6Lockdown'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-IPv6-DYNAMIC-LOCKDOWN-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-IPv6-DYNAMIC-LOCKDOWN-MIB::hpicfIpv6Lockdown'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (34)
.1.3.6.1.4.1.11.2.14.11.5.1.103
.1.3.6.1.4.1.11.2.14.11.5.1.103.0
.1.3.6.1.4.1.11.2.14.11.5.1.103.0.2
.1.3.6.1.4.1.11.2.14.11.5.1.103.0.2.1
.1.3.6.1.4.1.11.2.14.11.5.1.103.0.2.2
.1.3.6.1.4.1.11.2.14.11.5.1.103.0.2.3
.1.3.6.1.4.1.11.2.14.11.5.1.103.0.2.4
.1.3.6.1.4.1.11.2.14.11.5.1.103.0.2.5
.1.3.6.1.4.1.11.2.14.11.5.1.103.0.4
.1.3.6.1.4.1.11.2.14.11.5.1.103.0.4.1
.1.3.6.1.4.1.11.2.14.11.5.1.103.0.4.2
.1.3.6.1.4.1.11.2.14.11.5.1.103.0.4.3
.1.3.6.1.4.1.11.2.14.11.5.1.103.0.4.4
.1.3.6.1.4.1.11.2.14.11.5.1.103.0.4.5
.1.3.6.1.4.1.11.2.14.11.5.1.103.0.4.6
.1.3.6.1.4.1.11.2.14.11.5.1.103.0.4.7
.1.3.6.1.4.1.11.2.14.11.5.1.103.0.4.8
.1.3.6.1.4.1.11.2.14.11.5.1.103.1
.1.3.6.1.4.1.11.2.14.11.5.1.103.1.1
.1.3.6.1.4.1.11.2.14.11.5.1.103.1.1.1
.1.3.6.1.4.1.11.2.14.11.5.1.103.1.1.2
.1.3.6.1.4.1.11.2.14.11.5.1.103.1.1.2.1
.1.3.6.1.4.1.11.2.14.11.5.1.103.1.1.2.1.1
Bits
.1.3.6.1.4.1.11.2.14.11.5.1.103.1.1.2.1.2
.1.3.6.1.4.1.11.2.14.11.5.1.103.1.1.3
.1.3.6.1.4.1.11.2.14.11.5.1.103.1.1.4
.1.3.6.1.4.1.11.2.14.11.5.1.103.1.2
.1.3.6.1.4.1.11.2.14.11.5.1.103.1.2.1
.1.3.6.1.4.1.11.2.14.11.5.1.103.1.2.1.1
.1.3.6.1.4.1.11.2.14.11.5.1.103.1.2.1.1.1
.1.3.6.1.4.1.11.2.14.11.5.1.103.1.2.1.1.2
.1.3.6.1.4.1.11.2.14.11.5.1.103.2
.1.3.6.1.4.1.11.2.14.11.5.1.103.2.1
.1.3.6.1.4.1.11.2.14.11.5.1.103.2.2
Dependencies (20) 8 direct · 12 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Compliance Statements (2)

OID .1.3.6.1.4.1.11.2.14.11.5.1.103.2.2.1
The compliance statement for HP
switches that support Dynamic IPv6 Lockdown.
Required groups

OID .1.3.6.1.4.1.11.2.14.11.5.1.103.2.2.2
The compliance statement for HP
switches that support Dynamic IP Lockdown
Notify group .
Required groups
Notifications / Traps (2)
NameOIDDescription
.1.3.6.1.4.1.11.2.14.11.5.1.103.0.1
This trap is sent when hardware runs out of resource
to program Dynamic IPv6 Lockdown rule. It is controlled
by the state of
hpicfcfDIPLDv6SourceBindingOutOfResourcesTrapCtrl
object.Implementation of this trap is optional.
.1.3.6.1.4.1.11.2.14.11.5.1.103.0.3
This notification indicates a host was denied access to
the switch based on Dynamic IPv6 lockdown protection rules.
This trap is controlled by the state of the
'hpicfDIPLDv6SourceBindingViolationsTrapCtrl' object.
Implementation of this trap is optional.