This trap signifies that the sending protocol
entity recognizes that one of the xDSL communication
links is in a fluctuating state. This is a trap of
'minor' class.
xdslPortSpeedNormal
.1.3.6.1.4.1.1795.2.24.2.6.8.1.0.102
This trap signifies that the port speed of the
xDSL link has has gone above the threshold value.
This is a trap of 'warning' class. This trap compliments the
xdslPortSpeedLow Trap
xdslMarginNormal
.1.3.6.1.4.1.1795.2.24.2.6.8.1.0.103
This trap signifies that the margin estimate has gone
above a customer set threshold value. this is a trap
of 'minor' class. this trap compliments the xdslMarginLow
trap
xdslErrorRateNormal
.1.3.6.1.4.1.1795.2.24.2.6.8.1.0.104
This trap signifies that the error rate estimates
gone below a customer set threshold value. This is a trap
of 'minor' class. This trap compliments the xdslErrorRateHigh trap.
xdslPortOperational
.1.3.6.1.4.1.1795.2.24.2.6.8.1.0.105
This trap signifies that the modem set which was bad is now operational.
This is a trap of 'major' class. This trap compliments the
xdslPortFailure trap.
xdslTestOver
.1.3.6.1.4.1.1795.2.24.2.6.8.1.0.106
This trap signifies that the test has completed on one of the
ports. This trap compliments the xdslTestStart trap.
xdslRtuTypeMismatchClear
.1.3.6.1.4.1.1795.2.24.2.6.8.1.0.107
The RTU configured in the DSL card does match with the RTU connected
to the DSL port indicated by the ifIndex.
xdslRtuSelfTestFail
.1.3.6.1.4.1.1795.2.24.2.6.8.1.0.16
A self test failure from the RTU connected
to the DSL port indicated by the ifIndex.
xdslRtuLastGasp
.1.3.6.1.4.1.1795.2.24.2.6.8.1.0.17
Card received LastGap message from SN followed by a link
down condition one minute later.
xdslSNDeviceFail
.1.3.6.1.4.1.1795.2.24.2.6.8.1.0.18
Operating software has detected an internal device failure. The
RTU is still operating.
xdslSNSelfTestFail
.1.3.6.1.4.1.1795.2.24.2.6.8.1.0.19
Failure of the RTU's hardware components. This trap is only set if the
hardware failure still allows sending traps.
xdslPortSpeedLow
.1.3.6.1.4.1.1795.2.24.2.6.8.1.0.2
This trap signifies that the port speed of the
xDSL link has dropped below a threshold value.
This is a trap of 'warning' class
xdslSNFatalReset
.1.3.6.1.4.1.1795.2.24.2.6.8.1.0.20
Fatal error device reset
xdslLinkDownAnalysisTrap
.1.3.6.1.4.1.1795.2.24.2.6.8.1.0.21
This trap signifies that the sending protocol
entity recognizes that the xDSL communication
link is up. LinkDownReason conveys the reason
for link down.
xdslRemoteInjectionFailureTrap
.1.3.6.1.4.1.1795.2.24.2.6.8.1.0.22
This trap signifies that the injection of filters to SN failed
It is of warning class
xdslRemoteInjectionIncompatibleTrap
.1.3.6.1.4.1.1795.2.24.2.6.8.1.0.23
This trap signifies that the injection of filters is not supported
by the SN. It is of warning class
xdslLossOfNetworkTimingSignalTrap
.1.3.6.1.4.1.1795.2.24.2.6.8.1.0.24
This trap is generated by an IDSL port card when it detects
that the line supplying timing signals to the chassis on the port
designated as NT has dropped. The ifIndex corresponds to the port
designated as NT.
xdslMarginLow
.1.3.6.1.4.1.1795.2.24.2.6.8.1.0.3
This trap signifies that the margin estimate
is below a customer set threshold value. this is a trap
of 'minor' class.
xdslErrorRateHigh
.1.3.6.1.4.1.1795.2.24.2.6.8.1.0.4
This trap signifies that the error rate estimates
is above a customer set threshold value. This is a trap
of 'minor' class.
xdslPortFailure
.1.3.6.1.4.1.1795.2.24.2.6.8.1.0.5
This trap signifies that the processor detected
a bad modem set. This is a trap of 'major' class
xdslTestStart
.1.3.6.1.4.1.1795.2.24.2.6.8.1.0.6
This trap signifies that a diagnostic test has started on one of the
ports
xdslRtuTypeMismatch
.1.3.6.1.4.1.1795.2.24.2.6.8.1.0.7
The RTU configured in the DSL card does NOT match with the RTU connected
to the DSL port indicated by the ifIndex.