HOTWIRE-XDSL-INTERFACE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
7
Rows
7
Columns
86

xdslDevIfIntervalStatsTable

table mandatory
.1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1 · 1 row entry · 37 columns
Open in standard view
Uses the paradyne variant from /opt/observium/mibs/paradyne.
Command help
Walk xdslDevIfIntervalStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HOTWIRE-XDSL-INTERFACE-MIB' -M '/opt/observium/mibs/paradyne:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HOTWIRE-XDSL-INTERFACE-MIB::xdslDevIfIntervalStatsTable' 
The xdslIfStatsTable provides statistics specific to the xDSL
link. Statistics are collected on a per port basis and 
on specified intervals. Hence as such this table is 
indexed by the xdslDevIfStatsIfIndex and 
xdslDevIfStatsInterval. Also Statistics are grouped
into remote and central statistics. By 'remote' we mean the
statistics collected by the device at the customer premises
and by 'central' we mean the statistics collected by the
device located at the central office. The objects which
are not grouped into these two groups are related to both
ends of the xDSL link.
xdslDevIfIntervalStatsEntry row .1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1
Describes a specific xDSL satistics entry.
Indexes
Column Syntax OID
xdslDevIfStatsIfIndexmandatory
The value of this object corresponds directly to each
DSL interface as described in ifTable.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.1
xdslDevIfStatsIntervalmandatory
The value of this object corresponds to the
interval of time during which statistics were
collected. previousDay(32) will have the statistics
collected from 12 midnight previous calendar day
Enumeration
Enumerated Values:
1first15MinuteSlice
2second15MinuteSlice
3third15MinuteSlice
4fourth15MinuteSlice
5currentHour
6current15Minutes
7hour1of24hrs
8hour2of24hrs
9hour3of24hrs
10hour4of24hrs
11hour5of24hrs
12hour6of24hrs
13hour7of24hrs
14hour8of24hrs
15hour9of24hrs
16hour10of24hrs
17hour11of24hrs
18hour12of24hrs
19hour13of24hrs
20hour14of24hrs
21hour15of24hrs
22hour16of24hrs
23hour17of24hrs
24hour18of24hrs
25hour19of24hrs
26hour20of24hrs
27hour21of24hrs
28hour22of24hrs
29hour23of24hrs
30hour24of24hrs
31current24Hours
32previousDay
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.2
xdslDevIfStatsValid15MinuteIntervalCountmandatory
Reflects the number of 15 minute intervals
during which link was up and statistics were
received from the remote end
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.3
xdslDevIfStatsElapsedTimeLinkUpmandatory
Reflects the elapsed time since the link was up.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.4
xdslDevIfStatsLinkDownCountmandatory
Reflects the number of times that the xDSL link has gone to a
down state. This may be due to shutting down of the
customers side of the link. It could also be due to error
conditions which result in the going down. A la…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.5
xdslDevIfStatsUpStreamSpeedmandatory
The speed in the upstream (from the remote
to the central site) direction. This object
compliments the ifSpeed object in the ifTable which
represents the speed in the downstream (from the
central to the remote site) d…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.6
xdslDevIfStatsCentralReceiverGainmandatory
Reflects the receiver gain at the central site.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.7
xdslDevIfStatsCentralRecMarginmandatory
Reflects the margin at the central site.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.8
xdslDevIfStatsCentralRecAttenuationEstimatemandatory
Reflects the attenuation estimate at the central site.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.9
xdslDevIfStatsCentralRecTransmitPowermandatory
Reflects the transmit power at the central site.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.10
xdslDevIfStatsCentralRecErrorRatemandatory
Reflects the error rate at the central site. This string
will represent a floating point number of the form.
[ErrRate][eE][+-][ErrRateBase] where ErrRate and ErrRateBase
are integers. In Other Words
ErrRate * […
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.11
xdslDevIfStatsCentralRecErroredSecondsmandatory
Reflects the errored seconds at the central site.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.12
xdslDevIfStatsCentralRecSeverelyErroredSecondsmandatory
Reflects the severely errored seconds at the central site.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.13
xdslDevIfStatsRemoteReceiverGainmandatory
Reflects the receiver gain at the remote site
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.14
xdslDevIfStatsRemoteRecMarginmandatory
Reflects the margin at the remote site
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.15
xdslDevIfStatsRemoteRecAttenuationEstimatemandatory
Reflects the attenuation estimate at the remote site
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.16
xdslDevIfStatsRemoteRecTransmitPowermandatory
Reflects the transmit power at the remote site.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.17
xdslDevIfStatsRemoteRecErrorRatemandatory
Reflects the error rate at the remote site. This string
will represent a floating point number of the form a.b.
[ErrRate][eE][+-][ErrRateBase] where ErrRate and ErrRateBase
are integers. In Other Words
ErrRate *…
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.18
xdslDevIfStatsRemoteRecErroredSecondsmandatory
Reflects the errored seconds at the remote site.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.19
xdslDevIfStatsRemoteRecSeverelyErroredSecondsmandatory
Reflects the severely errored seconds at the remote site.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.20
xdslDevIfStatsRemoteOctetsCorrectedmandatory
This object reflects the number of octets corrected
when reed-solomon is turned on at the remote site.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.21
xdslDevIfStatsRemoteOctetsNotCorrectedmandatory
This object reflects the number of octets not corrected
when reed-solomon is turned on at the remote site.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.22
xdslDevIfStatsRemoteReceivedKiloOctetsmandatory
The number of octets that have been received by the xDSL
interface at the remote site divided by 1000.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.23
xdslDevIfStatsRemoteReceivedPktsmandatory
The number of good packets that have been received by
the xDSL interface at the remote site.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.24
xdslDevIfStatsRemoteRecErrPktsmandatory
Reflects the number packet receive with error by the xDSL
interface at the remote site.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.25
xdslDevIfStatsRemoteDroppedPktsmandatory
Reflects the number of good packets that have been
received by the xDSL interface at the remote site,
but have been dropped due to insufficient buffer capacity.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.26
xdslDevIfStatsRemoteTransmittedKiloOctetsmandatory
The number of octets that have been transmitted by the
xDSL interface at the remote site divided by 1000.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.27
xdslDevIfStatsRemoteTransmittedPktsmandatory
The number of pkts that have been transmitted by the
xDSL interface at the remote site.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.28
xdslDevIfStatsCentralRecErroredMinutesmandatory
Reflects the errored minutes at the central site.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.29
xdslDevIfStatsCentralRecSeverelyErroredMinutesmandatory
Reflects the severely errored minutes at the central site.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.30
xdslDevIfStatsRemoteRecErroredMinutesmandatory
Reflects the errored minutes at the remote site.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.31
xdslDevIfStatsRemoteRecSeverelyErroredMinutesmandatory
Reflects the severely errored minutes at the remote site.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.32
xdslDevIfStatsCentralReceivedKiloOctetsmandatory
The number of octets that have been received by the xDSL
interface at the central site divided by 1000.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.33
xdslDevIfStatsCentralTransmittedKiloOctetsmandatory
The number of octets that have been transmitted by the
xDSL interface at the central site divided by 1000.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.34
xdslDevIfStatsCentralTransmittedPktsmandatory
The number of packets that have been transmitted by the
xDSL interface at the central site.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.35
xdslDevIfStatsCentralReceivedPktsmandatory
The number of packets that have been received by the
xDSL interface at the central site.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.36
xdslDevIfStatsCentralErrPktsmandatory
The number of packets that have been received by the
xDSL interface at the central site with error.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.37

xdslDevIfConfigTable

table mandatory
.1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1 · 1 row entry · 17 columns
Open in standard view
Uses the paradyne variant from /opt/observium/mibs/paradyne.
Command help
Walk xdslDevIfConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HOTWIRE-XDSL-INTERFACE-MIB' -M '/opt/observium/mibs/paradyne:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HOTWIRE-XDSL-INTERFACE-MIB::xdslDevIfConfigTable' 
The xdslDevIfConfigTable provides config information specific 
to a xDSL device, or system. The table is indexed by an 
object which corresponds to ifIndex. These ifIndex entries, 
themselves, denote and identify specific xdsl interfaces on
the board or module. Also the configuration parameters are
grouped into two broad categories, 'up' and 'down'. 'up'
reflects the upstream direction (from the customer premises
to the central office). 'Down' reflects the downstream
direction (from the central office to the customer premises)
xdslDevIfConfigEntry row .1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1
Describes a specific xDSL interface entry.
Indexes
Column Syntax OID
xdslDevIfConfigIfIndexmandatory
The value of this object corresponds directly to each xDSL
interface as described in ifTable.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.1
xdslDevIfConfigPortSpeedBehaviourmandatory
The value of this object corresponds to the
behaviour of the specified port. The default
value for this object is fixed (1).
Enumerationr/w
Enumerated Values:
1fixed
2adaptive
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.2
xdslDevIfConfigUpFixedPortSpeedmandatory
The value of this object corresponds to the upstream
speed of the specified port for fixed port speed
behaviour. All the speeds enumerated above are in kbps.
If the port speed behaviour is adaptive an error of
noSuchNam…
Enumerationr/w
Enumerated Values:
1s272
2s408
3s544
4s680
5s816
6s952
7s1088
8s91
9s476
10s340
11s204
12s136
13s119
14s102
15s85
16s68
17s51
18s45
19s34
20s11
21s2320
22s2046
23s1552
24s1040
25s784
26s528
27s400
28s277
29s144
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.3
xdslDevIfConfigDownFixedPortSpeedmandatory
The value of this object corresponds to the downstream
speed of the specified port for fixed port speed
behaviour. All the speeds enumerated above are in kbps.
if the port speed behaviour is adaptive an error of noSuchN…
Enumerationr/w
Enumerated Values:
1s640
2s960
3s1280
4s1600
5s1920
6s2240
7s2560
8s2688
9s3200
10s4480
11s5120
12s6272
13s7168
14s1024
15s896
16s768
17s512
18s384
19s256
20s2320
21s2046
22s1552
23s1040
24s784
25s528
26s400
27s277
28s144
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.4
xdslDevIfConfigUpAdaptiveUpperBoundPortSpeedmandatory
The value of this object corresponds to the
upper bound for the upstream port speed of the specified port
for adaptive port speed behaviour. The speeds are measured
in kbps. If the port speed behaviour is fixed an err…
Enumerationr/w
Enumerated Values:
1s272
2s408
3s544
4s680
5s816
6s952
7s1088
8s91
9s476
10s340
11s204
12s136
13s119
14s102
15s85
16s68
17s51
18s45
19s34
20s11
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.5
xdslDevIfConfigUpAdaptiveLowerBoundPortSpeedmandatory
The value of this object corresponds to the
lower bound for the upstream port speed of the
specified port for adaptive port speed behaviour
in kbps. If the port speed behaviour is fixed an
error of noSuchName will be r…
Enumerationr/w
Enumerated Values:
1s272
2s408
3s544
4s680
5s816
6s952
7s1088
8s91
9s476
10s340
11s204
12s136
13s119
14s102
15s85
16s68
17s51
18s45
19s34
20s11
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.6
xdslDevIfConfigDownAdaptiveUpperBoundPortSpeedmandatory
The value of this object corresponds to
the upper bound allowed for the downstream port speed
of the specified port for adaptive port speed
behaviour. The speeds are measured in kbps.
if the port speed behaviour is f…
Enumerationr/w
Enumerated Values:
1s640
2s960
3s1280
4s1600
5s1920
6s2240
7s2560
8s2688
9s3200
10s4480
11s5120
12s6272
13s7168
14s1024
15s896
16s768
17s512
18s384
19s256
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.7
xdslDevIfConfigDownAdaptiveLowerBoundPortSpeedmandatory
The value of this object corresponds to the
Minimum lower bound allowed for the downstream port speed
of the specified port for adaptive port speed behaviour.
If the port speed behaviour is fixed an error of noSuchName…
Enumerationr/w
Enumerated Values:
1s640
2s960
3s1280
4s1600
5s1920
6s2240
7s2560
8s2688
9s3200
10s4480
11s5120
12s6272
13s7168
14s1024
15s896
16s768
17s512
18s384
19s256
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.8
xdslDevIfConfigReedSolomonDownForwardErrorCorrectionmandatory
The value of this object corresponds to the
Reed-Solomon forward error correction in the downstream
direction. The default value of this object should be
minimizeError (1).
Enumerationr/w
Enumerated Values:
1minimizeError
2minimizeDelay
3reedSolomonNotSupported
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.9
xdslDevIfConfigMarginThresholdmandatory
The value of this object corresponds to the offset from
the startup margin. The threshold margin is calculated
by subtracting the offset from the startup margin.
Permissible range of values are between -7 and 14.
A val…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.10
xdslDevIfConfigEstimatedHrErrRateThresholdmandatory
The value of this object corresponds to the
estimated error rate threshold value on an hourly basis.
A value of -9999 disables the threshold check. The default value
for this object is 1000.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.11
xdslDevIfConfigEstimatedDayErrRateThresholdmandatory
The value of this object corresponds to the
estimated error rate threshold value on a daily basis. A
value of -9999 disables this threshold check. The default value
for this object is 10000
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.12
xdslDevIfConfigPortIDmandatory
The value of this object corresponds to 40 character
information only field that identifies what the DSL
port is connected to (Circuit ID, MDF location,
Customer name, etc.)
OctetStringr/w
Constraints:
range: 1-40
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.13
xdslDevIfLinkUpDownTransitionThresholdmandatory
The value of this object corresponds to the threshold
value for link up-down transitions. If link up-down's exceed
this threshold value a xdslLinkupDownTransitions
trap is generated. This value would represent the numbe…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.14
xdslDevIfConfigStartUpMarginmandatory
The value of this object corresponds to the startup value
of the margin for a DSL interface (specified by ifIndex).
The unit is db (decibels. The higher the margin the better
the quality of the line. The default value …
Integer32r/w
Constraints:
range: -3-9
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.15
xdslDevIfConfigTxPowerAttenuationmandatory
This value corresponds to the Transmitt Power Attenuation in dB
for the access node. This value represents the downstream power
level in dB. Permissible range of values are between -6 and 0.
The default value of this ob…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.16
xdslDevIfConfigSnTxPowerAttenuationmandatory
This value corresponds to the Transmitt Power Attenuation in dB
for the service node. This value represents the upstream power
level in dB. The default value of this object is -6 dB.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.17

xdslRemoteSysTable

table mandatory
.1.3.6.1.4.1.1795.2.24.2.6.8.1.3.1 · 1 row entry · 9 columns
Open in standard view
Uses the paradyne variant from /opt/observium/mibs/paradyne.
Command help
Walk xdslRemoteSysTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HOTWIRE-XDSL-INTERFACE-MIB' -M '/opt/observium/mibs/paradyne:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HOTWIRE-XDSL-INTERFACE-MIB::xdslRemoteSysTable' 
The Remote System information table.  This table is based
on the mib-2 system mib.
xdslRemoteSysEntry row .1.3.6.1.4.1.1795.2.24.2.6.8.1.3.1.1
Describes a specific xDSL interface Remote Endpoint entry.
Indexes
Column Syntax OID
xdslRemoteSysIndexmandatory
Refer to the mib-2 system MIB for a description.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.3.1.1.1
xdslRemoteSysDescrmandatory
Refer to the mib-2 system MIB for a description.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.3.1.1.2
xdslRemoteSysObjectIDmandatory
Refer to the mib-2 system MIB for a description.
ObjectIdentifier .1.3.6.1.4.1.1795.2.24.2.6.8.1.3.1.1.3
xdslRemoteSysUpTimemandatory
Refer to the mib-2 system MIB for a description.
RFC1155-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.3.1.1.4
xdslRemoteSysContactmandatory
Refer to the mib-2 system MIB for a description.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.3.1.1.5
xdslRemoteSysNamemandatory
Refer to the mib-2 system MIB for a description.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.3.1.1.6
xdslRemoteSysLocationmandatory
Refer to the mib-2 system MIB for a description.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.3.1.1.7
xdslRemoteSysServicesmandatory
Refer to the mib-2 system MIB for a description.
Integer32
Constraints:
range: 0-127
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.3.1.1.8
xdslRemoteSysCircuitIdmandatory
The value of this object reflects the Circuit ID
for a Service Node.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.3.1.1.9

xdslRemoteDTEStatusTable

table mandatory
.1.3.6.1.4.1.1795.2.24.2.6.8.1.4.1 · 1 row entry · 6 columns
Open in standard view
Uses the paradyne variant from /opt/observium/mibs/paradyne.
Command help
Walk xdslRemoteDTEStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HOTWIRE-XDSL-INTERFACE-MIB' -M '/opt/observium/mibs/paradyne:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HOTWIRE-XDSL-INTERFACE-MIB::xdslRemoteDTEStatusTable' 
The Remote DTE Status table. This provides status information about the 
DTE port of the DSL RTUs.
xdslRemoteDTEStatusEntry row .1.3.6.1.4.1.1795.2.24.2.6.8.1.4.1.1
This provides status information about the
DTE port of a specific DSL RTU.
Indexes
Column Syntax OID
xdslRemoteDTEStatusIndexmandatory
The value of this object corresponds directly to each DSL interface as
described in the ifTable.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.4.1.1.1
xdslRemoteDTEStatemandatory
The value of this object reflects the state of the DTE interface of the
DSL RTU.
Enumeration
Enumerated Values:
1inService
2outOfService
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.4.1.1.2
xdslRemoteDTETypemandatory
The value of this object reflects the configuration of the DTE interface
of the DSL RTU.
Enumeration
Enumerated Values:
1v35
2eia530
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.4.1.1.3
xdslRemoteDTEClockSourcemandatory
The value of this object reflects the timing configuration of the DTE
interface of the DSL RTU.
Enumeration
Enumerated Values:
1internal
2external
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.4.1.1.4
xdslRemoteDTEStrobemandatory
The value of this object reflects the clock edge timing configuration of the DTE
interface of the DSL RTU.
Enumeration
Enumerated Values:
1risingEdge
2fallingEdge
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.4.1.1.5
xdslRemoteDTELoopbackStatemandatory
The value of this object reflects the loopback state of the DTE
interface of the DSL RTU.
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.4.1.1.6

xdslDevMvlIfConfigTable

table mandatory
.1.3.6.1.4.1.1795.2.24.2.6.8.1.5.1 · 1 row entry · 7 columns
Open in standard view
Uses the paradyne variant from /opt/observium/mibs/paradyne.
Command help
Walk xdslDevMvlIfConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HOTWIRE-XDSL-INTERFACE-MIB' -M '/opt/observium/mibs/paradyne:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HOTWIRE-XDSL-INTERFACE-MIB::xdslDevMvlIfConfigTable' 
The xdslDevMvlIfConfigTable provides config information specific 
to a xDSL(MVL) device, or system. The table is indexed by an 
object which corresponds to ifIndex. These ifIndex entries, 
themselves, denote and identify specific xdsl(Mvl) interfaces on
the board or module.
xdslDevMvlIfConfigEntry row .1.3.6.1.4.1.1795.2.24.2.6.8.1.5.1.1
Describes a specific xDSL(MVL) interface entry.
Indexes
Column Syntax OID
xdslDevMvlIfConfigIfIndexmandatory
The value of this object corresponds directly to each xDSL(MVL)
interface as described in ifTable.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.5.1.1.1
xdslDevMvlIfConfigUpperBoundPortSpeedmandatory
The value of this object corresponds to the upper bound
port speed of the specified port. The speeds are measured in kbps.
Supported speeds are 128, 192, 256, 320, 384, 448, 512
576, 640, 704, 768.
The default value of …
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.5.1.1.2
xdslDevMvlIfConfigMarginThresholdmandatory
The value of this object corresponds to the
Margin threshold value. Permissible range of
values are between -5 and 9. A value of -9999
disables the threshold check. The default value is 3
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.5.1.1.3
xdslDevMvlIfConfigPortIDmandatory
The value of this object corresponds to 40 character
information only field that identifies what the DSL
port is connected to (Circuit ID, MDF location,
Customer name, etc.)
OctetStringr/w
Constraints:
range: 1-40
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.5.1.1.4
xdslDevMvlIfLinkUpDownTransitionThresholdmandatory
The value of this object corresponds to the threshold
value for link up-down transitions. If link up-down's exceed
this threshold value a xdslLinkupDownTransitions
trap is generated. This value would represent the numbe…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.5.1.1.5
xdslDevMvlIfConfigOnHookTxPowerAttenuationmandatory
This value corresponds to the On-hook Transmitt Power Attenuation
in dB for the access node and the service node. This value represents
both downstream and upstream power level in dB while the phone is
On-hook. Permiss…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.5.1.1.6
xdslDevMvlIfConfigOffHookTxPowerAttenuationmandatory
This value corresponds to the Off-hook Transmitt Power Attenuation
in dB for the access node and the service node. This value represents
both downstream and upstream power level in dB while the phone is
Off-hook. Permi…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.5.1.1.7

xdslDevNAPCustomerAccountTable

table mandatory
.1.3.6.1.4.1.1795.2.24.2.6.8.1.6.1 · 1 row entry · 4 columns
Open in standard view
Uses the paradyne variant from /opt/observium/mibs/paradyne.
Command help
Walk xdslDevNAPCustomerAccountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HOTWIRE-XDSL-INTERFACE-MIB' -M '/opt/observium/mibs/paradyne:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HOTWIRE-XDSL-INTERFACE-MIB::xdslDevNAPCustomerAccountTable' 
The xdslDevNAPCustomerAccountTable provides customer accounting 
information on each DSL port. Network Access Providers can accurately
bill their end station DSL customers by the amount of usage.  
The table is indexed by ifIndex and xdslDevNAPCustomerAccountInterval
The ifIndex identifies specific xdsl interface on the device and
xdslDevNAPCustomerAccountInterval specifies the accounting information
is for the current day or the previous day. Customer data excludes all
traffic used for management purpose.
xdslDevNAPCustomerAccountEntry row .1.3.6.1.4.1.1795.2.24.2.6.8.1.6.1.1
Provides customer related accounting information specific to an
xDSL interface entry.
Indexes
Column Syntax OID
xdslDevNAPCustomerAccountIfIndexmandatory
The value of this object corresponds directly to each xDSL
interface as described in ifTable.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.6.1.1.1
xdslDevNAPCustomerAccountIntervalmandatory
The value of this object corresponds to the interval of time
during which customer accounting data were collected. Day
starts at 12.01 midnight
Enumeration
Enumerated Values:
1currentDay
2previousDay
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.6.1.1.2
xdslDevNAPCustomerAccountRecKiloOctetsmandatory
Customer data received at the AN's DSL port in 1000 Octets.
The default value of this object is 0
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.6.1.1.3
xdslDevNAPCustomerAccountTrxKiloOctetsmandatory
Customer data transmitted over the AN's DSL port in 1000 Octets.
The default value of this object is 0
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.6.1.1.4

xdslDevIDSLConfigTable

table mandatory
.1.3.6.1.4.1.1795.2.24.2.6.8.1.9.1 · 1 row entry · 6 columns
Open in standard view
Uses the paradyne variant from /opt/observium/mibs/paradyne.
Command help
Walk xdslDevIDSLConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HOTWIRE-XDSL-INTERFACE-MIB' -M '/opt/observium/mibs/paradyne:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HOTWIRE-XDSL-INTERFACE-MIB::xdslDevIDSLConfigTable' 
The xdslDevIDSLConfigTable provides configuration specific to the IDSL link.
xdslDevIDSLConfigEntry row .1.3.6.1.4.1.1795.2.24.2.6.8.1.9.1.1
Describes a specific IDSL configuration entry.
Indexes
Column Syntax OID
xdslDevIDSLConfigPortSpeedBehaviourmandatory
The value of this object corresponds to the
behaviour of the specified port. The default
value for this object is fixed (1).
Enumerationr/w
Enumerated Values:
1fixed
2adaptive
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.9.1.1.1
xdslDevIDSLConfigPortSpeedmandatory
The value of this object corresponds to both upstream
and downstream speed of the specified port. All the
speeds are in kbps. The default value for this object
is 128 kbps.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.9.1.1.2
xdslDevIDSLConfigPortIDmandatory
The value of this object corresponds to 40 character
information only field that identifies what the DSL
port is connected to (Circuit ID, MDF location,
Customer name, etc.)
OctetStringr/w
Constraints:
range: 1-40
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.9.1.1.3
xdslDevIDSLTimingPortTransceiverModemandatory
The transceiver mode selected on the timing source port.
Only one IDSL port can be set to NT mode. This timing
will then be distributed to all other IDSL ports in the
chassis that are set to LT.

The selec…
Enumerationr/w
Enumerated Values:
1networkTiming
2localTiming
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.9.1.1.4
xdslDevIDSLConfigMarginThresholdmandatory
The value of this object corresponds to the
Margin threshold value. A value of -9999 disables the
threshold check. The value range of this object is
-5 to 10. The default value is 3
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.9.1.1.5
xdslDevIDSLLinkUpDownTransitionThresholdmandatory
The value of this object corresponds to the threshold
value for link up-down transitions. If link up-down's exceed
this threshold value a xdslLinkupDownTransitions
trap is generated. This value would represent the numbe…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.2.6.8.1.9.1.1.6