HIRSCHMANN-PIM-MIB Table View

The (conceptual) table listing the router's PIM interfaces.
IGMP and PIM are enabled on all interfaces listed in this
table.

hmPIMInterfaceEntry row .1.3.6.1.4.1.248.15.4.99.1.1.2.1

An entry (conceptual row) in the hmPIMInterfaceTable.

Indexes

hmPIMInterfaceIfIndex

Column	Syntax	OID
hmPIMInterfaceIfIndex The ifIndex value of this PIM interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.248.15.4.99.1.1.2.1.1
hmPIMInterfaceAddress The IP address of the PIM interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.248.15.4.99.1.1.2.1.2
hmPIMInterfaceNetMask The network mask for the IP address of the PIM interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.248.15.4.99.1.1.2.1.3
hmPIMInterfaceMode The configured mode of this PIM interface. A value of sparseDense is only valid for PIMv1.	Enumerationr/w Enumerated Values: 1 dense 2 sparse 3 sparseDense	.1.3.6.1.4.1.248.15.4.99.1.1.2.1.4
hmPIMInterfaceDR The Designated Router on this PIM interface. For point-to- point interfaces, this object has the value 0.0.0.0.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.248.15.4.99.1.1.2.1.5
hmPIMInterfaceHelloInterval The frequency at which PIM Hello messages are transmitted on this interface.	secondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.15.4.99.1.1.2.1.6
hmPIMInterfaceStatus The status of this entry. Creating the entry enables PIM on the interface; destroying the entry disables PIM on the interface.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.248.15.4.99.1.1.2.1.7
hmPIMInterfaceJoinPruneInterval The frequency at which PIM Join/Prune messages are transmitted on this PIM interface. The default value of this object is the hmPIMJoinPruneInterval.	secondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.15.4.99.1.1.2.1.8
hmPIMInterfaceCBSRPreference The preference value for the local interface as a candidate bootstrap router. The value of -1 is used to indicate that the local interface is not a candidate BSR interface.	Integer32r/w Constraints: range: -1-255	.1.3.6.1.4.1.248.15.4.99.1.1.2.1.9

The (conceptual) table listing the router's PIM neighbors.

hmPIMNeighborEntry row .1.3.6.1.4.1.248.15.4.99.1.1.3.1

An entry (conceptual row) in the hmPIMNeighborTable.

Indexes

hmPIMNeighborAddress

Column	Syntax	OID
hmPIMNeighborAddress The IP address of the PIM neighbor for which this entry contains information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.248.15.4.99.1.1.3.1.1
hmPIMNeighborIfIndex The value of ifIndex for the interface used to reach this PIM neighbor.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.248.15.4.99.1.1.3.1.2
hmPIMNeighborUpTime The time since this PIM neighbor (last) became a neighbor of the local router.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.248.15.4.99.1.1.3.1.3
hmPIMNeighborExpiryTime The minimum time remaining before this PIM neighbor will be aged out.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.248.15.4.99.1.1.3.1.4
hmPIMNeighborModedeprecated The active PIM mode of this neighbor. This object is deprecated for PIMv2 routers since all neighbors on the interface must be either dense or sparse as determined by the protocol running on the interface.	Enumeration Enumerated Values: 1 dense 2 sparse	.1.3.6.1.4.1.248.15.4.99.1.1.3.1.5

The (conceptual) table listing PIM-specific information on
a subset of the rows of the ipMRouteTable defined in the IP
Multicast MIB.

hmPIMIpMRouteEntry row .1.3.6.1.4.1.248.15.4.99.1.1.4.1

An entry (conceptual row) in the hmPIMIpMRouteTable. There
is one entry per entry in the ipMRouteTable whose incoming
interface is running PIM.

Indexes

IPMROUTE-STD-MIBipMRouteGroup IPMROUTE-STD-MIBipMRouteSource IPMROUTE-STD-MIBipMRouteSourceMask

Column	Syntax	OID
hmPIMIpMRouteUpstreamAssertTimer The time remaining before the router changes its upstream neighbor back to its RPF neighbor. This timer is called the Assert timer in the PIM Sparse and Dense mode specification. A value of 0 indicates that no Assert h…	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.248.15.4.99.1.1.4.1.1
hmPIMIpMRouteAssertMetric The metric advertised by the assert winner on the upstream interface, or 0 if no such assert is in received.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.15.4.99.1.1.4.1.2
hmPIMIpMRouteAssertMetricPref The preference advertised by the assert winner on the upstream interface, or 0 if no such assert is in effect.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.15.4.99.1.1.4.1.3
hmPIMIpMRouteAssertRPTBit The value of the RPT-bit advertised by the assert winner on the upstream interface, or false if no such assert is in effect.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.248.15.4.99.1.1.4.1.4
hmPIMIpMRouteFlags This object describes PIM-specific flags related to a multicast state entry. See the PIM Sparse Mode specification for the meaning of the RPT and SPT bits.	Bits Enumerated Values: 0 rpt 1 spt	.1.3.6.1.4.1.248.15.4.99.1.1.4.1.5

The (conceptual) table listing PIM information for
candidate Rendezvous Points (RPs) for IP multicast groups.
When the local router is the BSR, this information is
obtained from received Candidate-RP-Advertisements.  When
the local router is not the BSR, this information is
obtained from received RP-Set messages.

hmPIMRPSetEntry row .1.3.6.1.4.1.248.15.4.99.1.1.6.1

An entry (conceptual row) in the hmPIMRPSetTable.

Indexes

hmPIMRPSetComponent hmPIMRPSetGroupAddress hmPIMRPSetGroupMask hmPIMRPSetAddress

Column	Syntax	OID
hmPIMRPSetGroupAddress The IP multicast group address which, when combined with hmPIMRPSetGroupMask, gives the group prefix for which this entry contains information about the Candidate-RP.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.248.15.4.99.1.1.6.1.1
hmPIMRPSetGroupMask The multicast group address mask which, when combined with hmPIMRPSetGroupAddress, gives the group prefix for which this entry contains information about the Candidate-RP.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.248.15.4.99.1.1.6.1.2
hmPIMRPSetAddress The IP address of the Candidate-RP.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.248.15.4.99.1.1.6.1.3
hmPIMRPSetHoldTime The holdtime of a Candidate-RP. If the local router is not the BSR, this value is 0.	secondsInteger32 Constraints: range: 0-255	.1.3.6.1.4.1.248.15.4.99.1.1.6.1.4
hmPIMRPSetExpiryTime The minimum time remaining before the Candidate-RP will be declared down. If the local router is not the BSR, this value is 0.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.248.15.4.99.1.1.6.1.5
hmPIMRPSetComponent A number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.248.15.4.99.1.1.6.1.6

The (conceptual) table listing PIM-specific information on
a subset of the rows of the ipMRouteNextHopTable defined in
the IP Multicast MIB.

hmPIMIpMRouteNextHopEntry row .1.3.6.1.4.1.248.15.4.99.1.1.7.1

An entry (conceptual row) in the hmPIMIpMRouteNextHopTable.
There is one entry per entry in the ipMRouteNextHopTable
whose interface is running PIM and whose
ipMRouteNextHopState is pruned(1).

Indexes

IPMROUTE-STD-MIBipMRouteNextHopGroup IPMROUTE-STD-MIBipMRouteNextHopSource IPMROUTE-STD-MIBipMRouteNextHopSourceMask IPMROUTE-STD-MIBipMRouteNextHopIfIndex IPMROUTE-STD-MIBipMRouteNextHopAddress

Column	Syntax	OID
hmPIMIpMRouteNextHopPruneReason This object indicates why the downstream interface was pruned, whether in response to a PIM prune message or due to PIM Assert processing.	Enumeration Enumerated Values: 1 other 2 prune 3 assert	.1.3.6.1.4.1.248.15.4.99.1.1.7.1.2

The (conceptual) table listing the IP multicast groups for
which the local router is to advertise itself as a
Candidate-RP when the value of hmPIMComponentCRPHoldTime is
non-zero.  If this table is empty, then the local router
will advertise itself as a Candidate-RP for all groups
(providing the value of hmPIMComponentCRPHoldTime is non-
zero).

hmPIMCandidateRPEntry row .1.3.6.1.4.1.248.15.4.99.1.1.11.1

An entry (conceptual row) in the hmPIMCandidateRPTable.

Indexes

hmPIMCandidateRPGroupAddress hmPIMCandidateRPGroupMask

Column	Syntax	OID
hmPIMCandidateRPGroupAddress The IP multicast group address which, when combined with hmPIMCandidateRPGroupMask, identifies a group prefix for which the local router will advertise itself as a Candidate-RP.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.248.15.4.99.1.1.11.1.1
hmPIMCandidateRPGroupMask The multicast group address mask which, when combined with hmPIMCandidateRPGroupMask, identifies a group prefix for which the local router will advertise itself as a Candidate-RP.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.248.15.4.99.1.1.11.1.2
hmPIMCandidateRPAddress The (unicast) address of the interface which will be advertised as a Candidate-RP.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.248.15.4.99.1.1.11.1.3
hmPIMCandidateRPRowStatus The status of this row, by which new entries may be created, or old entries deleted from this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.248.15.4.99.1.1.11.1.4

The (conceptual) table containing objects specific to a PIM
domain.  One row exists for each domain to which the router
is connected.  A PIM-SM domain is defined as an area of the
network over which Bootstrap messages are forwarded.
Typically, a PIM-SM router will be a member of exactly one
domain.  This table also supports, however, routers which
may form a border between two PIM-SM domains and do not
forward Bootstrap messages between them.

hmPIMComponentEntry row .1.3.6.1.4.1.248.15.4.99.1.1.12.1

An entry (conceptual row) in the hmPIMComponentTable.

Indexes

hmPIMComponentIndex

Column	Syntax	OID
hmPIMComponentIndex A number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value. Routers that only support membership in a single PIM-SM domain should use a hmPIM…	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.248.15.4.99.1.1.12.1.1
hmPIMComponentBSRAddress The IP address of the bootstrap router (BSR) for the local PIM region.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.248.15.4.99.1.1.12.1.2
hmPIMComponentBSRExpiryTime The minimum time remaining before the bootstrap router in the local domain will be declared down. For candidate BSRs, this is the time until the component sends an RP-Set message. For other routers, this is the time u…	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.248.15.4.99.1.1.12.1.3
hmPIMComponentCRPHoldTime The holdtime of the component when it is a candidate RP in the local domain. The value of 0 is used to indicate that the local system is not a Candidate-RP.	secondsInteger32r/w Constraints: range: 0-255	.1.3.6.1.4.1.248.15.4.99.1.1.12.1.4
hmPIMComponentStatus The status of this entry. Creating the entry creates another protocol instance; destroying the entry disables a protocol instance.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.248.15.4.99.1.1.12.1.5