HIRSCHMANN-MMP4-QOS-MIB Table View

A table of ACL instances.

aclEntry row .1.3.6.1.4.1.248.15.3.2.1.1

The entry of the aclTable.

Indexes

aclIndex

Column	Syntax	OID
aclIndex The IP ACL table index this instance is associated with.	SNMPv2-SMIInteger32 Enumerated Values: 1 enabled 2 disabled Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.15.3.2.1.1.1
aclStatus Status of this instance. Entries can not be deleted until all rows in the aclIfTable and aclRuleTable with corresponding values of aclIndex have been deleted. active(1) - this ACL instance is acti…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.248.15.3.2.1.1.3

A table of IP ACL Rule instances.

aclRuleEntry row .1.3.6.1.4.1.248.15.3.2.4.1

A table of IP ACL Classification Rules

Indexes

FS-BFD-MIBfsBfdSessIndex aclIndex aclRuleIndex

Column	Syntax	OID
aclRuleIndex The index of this rule instance within an IP ACL.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.15.3.2.4.1.1
aclRuleAction The type of action this rule should perform.	Enumerationr/w Enumerated Values: 1 permit 2 deny Constraints: range: 0-7	.1.3.6.1.4.1.248.15.3.2.4.1.2
aclRuleProtocol icmp - 1 igmp - 2 ip - 4 tcp - 6 udp - 17 All values from 1 to 255 are valid.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.248.15.3.2.4.1.3
aclRuleSrcIpAddress The Source IP Address used in the ACL Classification.	SNMPv2-SMIIpAddressr/w Constraints: range: 1-4294967295	.1.3.6.1.4.1.248.15.3.2.4.1.4
aclRuleSrcIpMask The Source IP Mask used in the ACL Classification. This mask is expressed using wild-card notation,which is the 1's compliment of traditional Subnet Masks. Here, the 'Don't care bits' are represented by binary 1's and …	SNMPv2-SMIIpAddressr/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.248.15.3.2.4.1.5
aclRuleSrcL4Port The Source Port Number (Layer 4) used in the ACL Classification.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.15.3.2.4.1.6
aclRuleSrcL4PortRangeStart The Source Port Number(Layer 4) range start.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.15.3.2.4.1.7
aclRuleSrcL4PortRangeEnd The Source Port Number(Layer 4) range end.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.15.3.2.4.1.8
aclRuleDestIpAddress The Destination IP Address used in the ACL Classification.	SNMPv2-SMIIpAddressr/w Enumerated Values: 1 stop 2 start Type Constraints: range: 4	.1.3.6.1.4.1.248.15.3.2.4.1.9
aclRuleDestIpMask The Destination IP Mask used in the ACL Classification. This mask is expressed using wild-card notation,which is the 1's compliment of traditional Subnet Masks. Here, the 'Don't care bits' are represented by binary …	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.248.15.3.2.4.1.10
aclRuleDestL4Port The Destination Port (Layer 4) used in ACl classification.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.15.3.2.4.1.11
aclRuleDestL4PortRangeStart The Destination Port (Layer 4) starting range used in ACL classification.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.15.3.2.4.1.12
aclRuleDestL4PortRangeEnd The Destination Port (Layer 4) ending range used in ACL classification.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.15.3.2.4.1.13
aclRuleIPDSCP The Differentiated Services Code Point value.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.15.3.2.4.1.14
aclRuleIpPrecedence The Type of Service (TOS) IP Precedence value.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.15.3.2.4.1.15
aclRuleIpTosBits The Type of Service (TOS) Bits value.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.15.3.2.4.1.16
aclRuleIpTosMask The Type of Service (TOS) Mask value.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.15.3.2.4.1.17
aclRuleStatus Status of this instance. active(1) - this ACL Rule is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.248.15.3.2.4.1.18
aclRuleAssignQueueId Queue identifier to which all inbound packets matching this ACL rule are directed. This object defaults to the standard queue assignment for user priority 0 traffic per the IEEE 802.1D specification based on the numbe…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.248.15.3.2.4.1.19
aclRuleRedirectIntf A non-zero value indicates the external ifIndex to which all inbound packets matching this ACL rule are directed. A value of zero means packet redirection is not in effect, which is the default value of this object.	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.248.15.3.2.4.1.20
aclRuleMatchEvery Flag to indicate that the acl rule is defined to match on every IP packet, regardless of content.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.248.15.3.2.4.1.21

A table of MAC ACL instances.

aclMacEntry row .1.3.6.1.4.1.248.15.3.2.6.1

The entry of the aclMacTable.

Indexes

aclMacIndex

Column	Syntax	OID
aclMacIndex The MAC ACL table index this instance is associated with. When creating a new MAC ACL, refer to the aclMacIndexNextFree object to determine the next available aclMacIndex to use.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.15.3.2.6.1.1
aclMacName The name of this MAC ACL entry, which must consist of 1 to 31 alphanumeric characters and uniquely identify this MAC ACL. An existing MAC ACL can be renamed by setting this object to a new name. This obj…	OctetStringr/w Constraints: range: 1-31	.1.3.6.1.4.1.248.15.3.2.6.1.2
aclMacStatus Status of this instance. ACL MAC entries can not be deleted until all rows in the aclIfTable and aclRuleTable with corresponding values of aclMacIndex have been deleted. active(1) - this ACL insta…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.248.15.3.2.6.1.3

A table of layer 2 MAC ACL Rule instances.

aclMacRuleEntry row .1.3.6.1.4.1.248.15.3.2.7.1

A table of layer 2 MAC ACL Classification Rules

Indexes

aclMacIndex aclMacRuleIndex

Column	Syntax	OID
aclMacRuleIndex The index of this rule instance within an MAC ACL.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.15.3.2.7.1.1
aclMacRuleAction The type of action this MAC ACL rule should perform.	Enumerationr/w Enumerated Values: 1 permit 2 deny	.1.3.6.1.4.1.248.15.3.2.7.1.2
aclMacRuleCos The Class of Service (COS) used in the MAC ACL Classification. This is the three-bit user priority field in the 802.1Q tag header of a tagged Ethernet frame. For frames containing a double VLAN tag, thi…	Unsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.248.15.3.2.7.1.3
aclMacRuleCos2 The Secondary Class of Service (COS2) used in the MAC ACL Classification. This is the three-bit user priority field in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet frame.	Unsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.248.15.3.2.7.1.4
aclMacRuleDestMacAddr The Destination MAC address used in the MAC ACL Classification.	SNMPv2-TCMacAddressr/w Constraints: range: -1-255 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.248.15.3.2.7.1.5
aclMacRuleDestMacMask The Destination MAC address mask used in the MAC ACL Classification. This mask value identifies the portion of the aclMacRuleDestMacAddr that is compared against a packet. A non-contiguous mask value is …	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.248.15.3.2.7.1.6
aclMacRuleEtypeKey The Ethertype keyword used in the MAC ACL Classification. A keyword of custom(1) requires that the aclMacRuleEtypeValue object also be set.	Enumerationr/w Enumerated Values: 1 custom 2 appletalk 3 arp 4 ibmsna 5 ipv4 6 ipv6 7 ipx 8 mplsmcast 9 mplsucast 10 netbios 11 novell 12 pppoe 13 rarp	.1.3.6.1.4.1.248.15.3.2.7.1.7
aclMacRuleEtypeValue The Ethertype custom value used in the MAC ACL Classification. This object is only valid if the aclMacRuleEtypeKey is set to custom(1). The allowed value for this object is 0x0600 to 0xFFFF (1536 to 65…	EtypeValuer/w Type Constraints: range: 1536..65535	.1.3.6.1.4.1.248.15.3.2.7.1.8
aclMacRuleSrcMacAddr The Source MAC address used in the MAC ACL Classification.	SNMPv2-TCMacAddressr/w Constraints: range: 0-255 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.248.15.3.2.7.1.9
aclMacRuleSrcMacMask The Source MAC address mask used in the MAC ACL Classification. This mask value identifies the portion of the aclMacRuleSrcMacAddr that is compared against a packet. A non-contiguous mask value is permi…	SNMPv2-TCMacAddressr/w Constraints: range: 0-255 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.248.15.3.2.7.1.10
aclMacRuleVlanId The VLAN ID value used in the MAC ACL Classification. The VLAN ID field is defined as the 12-bit VLAN identifier in the 802.1Q tag header of a tagged Ethernet frame. This is contained in the first/outer…	Unsigned32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.248.15.3.2.7.1.11
aclMacRuleVlanIdRangeStart The VLAN ID range start value used in the MAC ACL Classification. Setting this value greater than the current aclMacRuleVlanIdRangeEnd changes the VLAN ID range end to the same value as the range start. T…	Unsigned32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.248.15.3.2.7.1.12
aclMacRuleVlanIdRangeEnd The VLAN ID range end value used in the MAC ACL Classification. Setting this value less than the current aclMacRuleVlanIdRangeStart changes the VLAN ID range start to the same value as the range end. The …	Unsigned32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.248.15.3.2.7.1.13
aclMacRuleVlanId2 The Secondary VLAN ID value used in the MAC ACL Classification. The Secondary VLAN ID field is defined as the 12-bit VLAN identifier in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet …	Unsigned32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.248.15.3.2.7.1.14
aclMacRuleVlanId2RangeStart The Secondary VLAN ID range start value used in the MAC ACL Classification. Setting this value greater than the current aclMacRuleVlanId2RangeEnd changes the Secondary VLAN ID range end to the same value as the range st…	Unsigned32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.248.15.3.2.7.1.15
aclMacRuleVlanId2RangeEnd The Secondary VLAN ID range end value used in the MAC ACL Classification. Setting this value less than the current aclMacRuleVlanId2RangeStart changes the Secondary VLAN ID range start to the same value as the range end…	Unsigned32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.248.15.3.2.7.1.16
aclMacRuleStatus Status of this instance. active(1) - this ACL Rule is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.248.15.3.2.7.1.17
aclMacRuleAssignQueueId Queue identifier to which all inbound packets matching this MAC ACL rule are directed. This object defaults to the standard queue assignment for user priority 0 traffic per the IEEE 802.1D specification based on the n…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.248.15.3.2.7.1.18
aclMacRuleRedirectIntf A non-zero value indicates the external ifIndex to which all inbound packets matching this MAC ACL rule are directed. A value of zero means packet redirection is not in effect, which is the default value of this objec…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.248.15.3.2.7.1.19
aclMacRuleMatchEvery Flag to indicate that the MAC acl rule is defined to match all packets, regardless of Ethertype.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.248.15.3.2.7.1.20

A table of ACL interface instances per direction.

aclIfEntry row .1.3.6.1.4.1.248.15.3.2.8.1

The entry of the aclIfTable.

Indexes

aclIfIndex aclIfDirection aclIfSequence aclIfAclType aclIfAclId

Column	Syntax	OID
aclIfIndex The interface to which this ACL instance applies.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.15.3.2.8.1.1
aclIfDirection The interface direction to which this ACL instance applies.	Enumeration Enumerated Values: 1 inbound 2 outbound	.1.3.6.1.4.1.248.15.3.2.8.1.2
aclIfSequence The relative evaluation sequence of this ACL for this interface and direction. When multiple ACLs are allowed for a given interface and direction, the sequence number determines the order in which the list of ACLs ar…	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.248.15.3.2.8.1.3
aclIfAclType The type of this ACL, which is used to interpret the aclIfId object value. Each type of ACL uses its own numbering scheme for identification (see aclIfId object for details). The aclIfId object must be …	Enumeration Enumerated Values: 1 ip 2 mac	.1.3.6.1.4.1.248.15.3.2.8.1.4
aclIfAclId The ACL identifier value, which is interpreted based on the aclIfType object. For the IP ACLs, the actual ACL number is its identifier as follows: IP standard ranges from 1-99, while IP extended ranges …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.15.3.2.8.1.5
aclIfStatus Status of this instance. active(1) - this ACL interface instance is active createAndGo(4) - set to this value to assign an ACL to an interface and direction destroy(6) - set to this value to remo…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.248.15.3.2.8.1.6

A table mapping evaluated IP precedence to Traffic 
Class for a specific physical port.  Traffic class 
is a number in the range 
(0..(dot1dPortNumTrafficClasses-1)).

hmAgentCosMapIpPrecEntry row .1.3.6.1.4.1.248.15.3.3.1.1.1

IP Precedence to Traffic Class mapping for a port.

Indexes

hmAgentCosMapIpPrecIntfIndex hmAgentCosMapIpPrecValue

Column	Syntax	OID
hmAgentCosMapIpPrecIntfIndex This is a unique index for an entry in the hmAgentCosMapIpPrecTable. A non-zero value indicates the ifIndex for the corresponding interface entry in the ifTable. A value of zero represents global configuration, …	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.248.15.3.3.1.1.1.1
hmAgentCosMapIpPrecValue The IP precedence value contained in the received frame. This value is only indicated in IP packets, but is independent of both media-type and frame tagging. Non-IP packets are handled in accordance …	Unsigned32 Constraints: range: 0-7	.1.3.6.1.4.1.248.15.3.3.1.1.1.2
hmAgentCosMapIpPrecTrafficClass Traffic class priority queue the received frame is mapped to. This represents the actual configuration setting the port is using.	Unsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.248.15.3.3.1.1.1.3

A table mapping evaluated IP DSCP to Traffic Class 
for a specific physical port.  Traffic class is a 
number in the range 
(0..(dot1dPortNumTrafficClasses-1)).

hmAgentCosMapIpDscpEntry row .1.3.6.1.4.1.248.15.3.3.1.2.1

IP DSCP to Traffic Class mapping for a port.

Indexes

hmAgentCosMapIpDscpIntfIndex hmAgentCosMapIpDscpValue

Column	Syntax	OID
hmAgentCosMapIpDscpIntfIndex This is a unique index for an entry in the hmAgentCosMapIpDscpTable. A non-zero value indicates the ifIndex for the corresponding interface entry in the ifTable. A value of zero represents global configuration, …	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.248.15.3.3.1.2.1.1
hmAgentCosMapIpDscpValue The IP DSCP value contained in the received frame. This value is only indicated in IP packets, but is independent of both media-type and frame tagging. Non-IP packets are handled in accordance with the…	Unsigned32 Constraints: range: 0-63	.1.3.6.1.4.1.248.15.3.3.1.2.1.2
hmAgentCosMapIpDscpTrafficClass Traffic class priority queue the received frame is mapped to.	Unsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.248.15.3.3.1.2.1.3

Specifies the interface trust mode of operation for 
a port.  The trust mode setting determines which COS 
mapping table is used for directing ingress packets 
to a Traffic Class.

hmAgentCosMapIntfTrustEntry row .1.3.6.1.4.1.248.15.3.3.1.3.1

COS interface trust mode.

Indexes

hmAgentCosMapIntfTrustIntfIndex

Column	Syntax	OID
hmAgentCosMapIntfTrustIntfIndex This is a unique index for an entry in the hmAgentCosMapIntfTrustTable. A non-zero value indicates the ifIndex for the corresponding interface entry in the ifTable. A value of zero represents global configuratio…	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.248.15.3.3.1.3.1.1
hmAgentCosMapIntfTrustMode The class of service trust mode of an interface. When set to a trusted mode, the appropriate COS mapping table is used as follows: trustDot1p(2) : dot1dTrafficClassTable trustIpPrecedence(3):…	Enumerationr/w Enumerated Values: 1 untrusted 2 trustDot1p 3 trustIpPrecedence 4 trustIpDscp	.1.3.6.1.4.1.248.15.3.3.1.3.1.2
hmAgentCosMapUntrustedTrafficClass The traffic class (i.e. hardware queue) to which all untrusted traffic is assigned. This includes all traffic when the hmAgentCosMapIntfTrustMode is set to untrusted(1), or just non-IP packets when in trustIpPrece…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.248.15.3.3.1.3.1.3

Table of class-of-service queue configuration 
controls for the specified interface.

hmAgentCosQueueControlEntry row .1.3.6.1.4.1.248.15.3.3.2.3.1

Provides a general control mechanism that affects
all queues on a given interface.

Indexes

hmAgentCosQueueIntfIndex

Column	Syntax	OID
hmAgentCosQueueIntfIndex This is a unique index for an entry in the hmAgentCosQueueControlTable, hmAgentCosQueueTable, or hmAgentCosQueueMgmtTable. A non-zero value indicates the ifIndex for the corresponding interface entry in the ifTa…	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.248.15.3.3.2.3.1.1
hmAgentCosQueueIntfShapingRate Maximum bandwidth allowed for this interface as a whole, typically used to shape the outbound transmission rate. The value is specified in terms of percentage of overall link speed for the port in 1% increments. A …	Unsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.248.15.3.3.2.3.1.2
hmAgentCosQueueMgmtTypeIntf The management technique used for all queues on this interface. If taildrop(1), then all new packets presented to the queues are dropped based on some maximum threshold value(s). If wred(2), then an active queue ma…	Enumerationr/w Enumerated Values: 1 taildrop 2 wred	.1.3.6.1.4.1.248.15.3.3.2.3.1.3
hmAgentCosQueueWredDecayExponent The decay exponent value used with the weighted random early discard (WRED) algorithm to determine how quickly the average queue length calculation reacts to the current length of the queue. A higher value produces…	Unsigned32r/w Constraints: range: 1-15	.1.3.6.1.4.1.248.15.3.3.2.3.1.4
hmAgentCosQueueDefaultsRestore Causes the default values to be restored for all COS queue objects defined for this interface. This includes objects in the following tables: hmAgentCosQueueTable hmAgentCosQueueMgmtTable …	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.248.15.3.3.2.3.1.5

Table of class-of-service queue configuration 
parameters for the specified interface.

hmAgentCosQueueEntry row .1.3.6.1.4.1.248.15.3.3.2.4.1

Each entry describes a single class-of-service (COS)
queue for a given Interface Index. The number of
configurable COS queues for an interface vary based
on device capabilities.

All objects defined for …

Indexes

hmAgentCosQueueIntfIndex hmAgentCosQueueIndex

Column	Syntax	OID
hmAgentCosQueueIndex The COS queue index, numbered 0 to (n-1), where n is the total number of configurable interface queues for the device as indicated by hmAgentCosQueueNumQueuesPerPort. In general, a higher numbered queue index is used …	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.248.15.3.3.2.4.1.1
hmAgentCosQueueSchedulerType The type of scheduling used for this queue. If strict(1), then all traffic placed on this queue is transmitted before any queue with a lower precedence (lower hmAgentCosQueueIndex). A weighted(2) scheme gives this…	Enumerationr/w Enumerated Values: 1 strict 2 weighted	.1.3.6.1.4.1.248.15.3.3.2.4.1.2
hmAgentCosQueueMinBandwidth Minimum guaranteed bandwidth allotted to this queue. The value is specified in terms of percentage of overall link speed for the port in 1% increments. A value of 0 means there is no guaranteed minimum bandwidth in…	Unsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.248.15.3.3.2.4.1.3
hmAgentCosQueueMaxBandwidth Maximum bandwidth allowed for this queue, typically used to shape the outbound transmission rate. The value is specified in terms of percentage of overall link speed for the port in 1% increments. A value of 0 mean…	Unsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.248.15.3.3.2.4.1.4
hmAgentCosQueueMgmtType The queue depth management technique used when per-queue specification is supported. If taildrop(1), then all new packets presented to the queue are dropped based on some maximum threshold value(s). If wred(2), the…	Enumerationr/w Enumerated Values: 1 taildrop 2 wred	.1.3.6.1.4.1.248.15.3.3.2.4.1.5