FS-BFD-MIB
This module defines fs BFD mibs.
- Source file
FS-BFD-MIB- Last revised
- Identity
fsBfdMIB- Base OID
1.3.6.1.4.1.52642.1.1.10.2.48
Imported Objects
| FS-SMI | fsMgmt |
| IF-MIB | InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 Counter64 Integer32 mib-2 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus StorageType TEXTUAL-CONVENTION (no object page) TimeStamp TruthValue |
Net-SNMP examples using the fscom MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'FS-BFD-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'FS-BFD-MIB::fsBfdMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-BFD-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-BFD-MIB::fsBfdMIB'
Objects (80)
Showing 80 of 80 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.52642.1.1.10.2.48 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.0 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.1 |
||
|
|
Enumeration
|
.1.3.6.1.4.1.52642.1.1.10.2.48.1.1.1 |
.1.3.6.1.4.1.52642.1.1.10.2.48.1.1.2 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.2 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.1 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.10 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.11 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.12 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.13 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.14 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.15 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.16 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.17 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.18 |
||
|
|
.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.19 |
|
|
Unsigned32
|
.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.2 |
|
.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.20 |
||
|
|
.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.21 |
|
|
|
.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.22 |
|
|
|
Unsigned32
|
.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.23 |
.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.24 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.25 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.26 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.27 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.28 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.29 |
||
|
|
.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.3 |
|
.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.30 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.31 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.32 |
||
|
Integer32
|
.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.33 |
|
.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.34 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.35 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.36 |
||
|
|
OctetString
|
.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.37 |
|
|
OctetString
|
.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.38 |
|
Unsigned32
|
.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.4 |
|
|
Unsigned32
|
.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.5 |
|
.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.6 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.7 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.8 |
||
|
Enumeration
|
.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.9 |
|
.1.3.6.1.4.1.52642.1.1.10.2.48.1.3 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.1 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.10 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.11 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.12 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.13 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.14 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.15 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.16 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.17 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.18 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.19 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.2 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.3 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.4 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.5 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.6 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.7 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.8 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.9 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.4 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.4.1 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.4.1.1 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.4.1.2 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.4.1.3 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.5 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.5.1 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.5.1.1 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.5.1.2 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.1.5.1.3 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.2 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.2.1 |
||
.1.3.6.1.4.1.52642.1.1.10.2.48.2.2 |
Dependencies (8) 6 direct · 2 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- FS-SMIfscom
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- INET-ADDRESS-MIBrfc
- FS-BFD-MIBfscomselected
Type Definitions (11)
| Unsigned32 |
range: 0..65535 |
|
| Unsigned32 |
range: 0..65535 |
|
| Enumeration |
noDiagnostic(0)controlDetectionTimeExpired(1)echoFunctionFailed(2)neighborSignaledSessionDown(3)forwardingPlaneReset(4)pathDown(5)concatenatedPathDown(6)administrativelyDown(7)reverseConcatenatedPathDown(8) |
|
| Unsigned32 |
range: 0..4294967295 |
|
| Unsigned32 |
range: 1..255 |
|
| Enumeration |
noAuthentication(-1)reserved(0)simplePassword(1)keyedMD5(2)meticulousKeyedMD5(3)keyedSHA1(4)meticulousKeyedSHA1(5) |
|
| Unsigned32 |
range: 1..4294967295 |
|
| Enumeration |
asyncModeWEchoFunction(1)asynchModeWOEchoFunction(2)demandModeWEchoFunction(3)demandModeWOEchoFunction(4) |
|
| Enumeration |
adminDown(1)down(2)init(3)up(4)failing(5) |
|
| Enumeration |
singleHop(1)multiHopTotallyArbitraryPaths(2)multiHopOutOfBandSignaling(3)multiHopUnidirectionalLinks(4)multiPointHead(5)multiPointTail(6) |
|
| OctetString |
range: 0..252 |
Conformance Groups (5)
Compliance Statements (2)
OID
.1.3.6.1.4.1.52642.1.1.10.2.48.2.2.1Compliance statement for agents that provide full
support for the BFD-MIB module. Such devices can
then be monitored and also be configured using
this MIB module.
support for the BFD-MIB module. Such devices can
then be monitored and also be configured using
this MIB module.
Required groups
| mandatory | fsBfdSessionGroup | |
| mandatory | fsBfdSessionReadOnlyGroup | |
| mandatory | fsBfdSessionPerfGroup | |
| mandatory | fsBfdNotificationGroup | |
| optional | fsBfdSessionPerfHCGroup |
This group is mandatory for all systems that are able to support the Counter64 date type. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| fsBfdSessSrcAddrType | Only unknown(0), ipv4(1), ipv6(2) and ipv6z(4) support are required. |
||
| fsBfdSessSrcAddr | An implementation is only required to support unknown(0), ipv4(1), ipv6(2) and ipv6z(4) sizes. |
||
| fsBfdSessDstAddrType | Only unknown(0), ipv4(1), ipv6(2) and ipv6z(4) support are required. |
||
| fsBfdSessDstAddr | An implementation is only required to support unknown(0), ipv4(1), ipv6(2) and ipv6z(4) sizes. |
||
| fsBfdSessRowStatus | Support for createAndWait and notReady is not required. |
||
| fsBfdSessDiscMapRowStatus | Support for createAndWait and notReady is not required. |
||
| fsBfdSessIpMapRowStatus | Support for createAndWait and notReady is not required. |
OID
.1.3.6.1.4.1.52642.1.1.10.2.48.2.2.2Compliance requirement for implementations that only
provide read-only support for BFD-MIB. Such devices
can then be monitored but cannot be configured using
this MIB module.
provide read-only support for BFD-MIB. Such devices
can then be monitored but cannot be configured using
this MIB module.
Required groups
| mandatory | fsBfdSessionGroup | |
| mandatory | fsBfdSessionReadOnlyGroup | |
| mandatory | fsBfdSessionPerfGroup | |
| mandatory | fsBfdNotificationGroup | |
| optional | fsBfdSessionPerfHCGroup |
This group is mandatory for all systems that are able to support the Counter64 date type. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| fsBfdSessVersionNumber | readonly | Write access is not required. | |
| fsBfdSessType | readonly | Write access is not required. | |
| fsBfdSessDestinationUdpPort | readonly | Write access is not required. | |
| fsBfdSessSourceUdpPort | readonly | Write access is not required. | |
| fsBfdSessEchoSourceUdpPort | readonly | Write access is not required. | |
| fsBfdSessAdminStatus | readonly | Write access is not required. | |
| fsBfdSessOperMode | readonly | Write access is not required. | |
| fsBfdSessDemandModeDesiredFlag | readonly | Write access is not required. | |
| fsBfdSessControlPlaneIndepFlag | readonly | Write access is not required. | |
| fsBfdSessMultipointFlag | readonly | Write access is not required. | |
| fsBfdSessInterface | readonly | Write access is not required. | |
| fsBfdSessSrcAddrType | readonly | Only unknown(0), ipv4(1), ipv6(2) and ipv6z(4) support are required. |
|
| fsBfdSessSrcAddr | readonly | An implementation is only required to support unknown(0), ipv4(1), ipv6(2) and ipv6z(4) sizes. |
|
| fsBfdSessDstAddrType | readonly | Only unknown(0), ipv4(1), ipv6(2) and ipv6z(4) support are required. |
|
| fsBfdSessDstAddr | readonly | An implementation is only required to support unknown(0), ipv4(1), ipv6(2) and ipv6z(4) sizes. |
|
| fsBfdSessGTSM | readonly | Write access is not required. | |
| fsBfdSessGTSMTTL | readonly | Write access is not required. | |
| fsBfdSessDesiredMinTxInterval | readonly | Write access is not required. | |
| fsBfdSessReqMinRxInterval | readonly | Write access is not required. | |
| fsBfdSessReqMinEchoRxInterval | readonly | Write access is not required. | |
| fsBfdSessDetectMult | readonly | Write access is not required. | |
| fsBfdSessAuthPresFlag | readonly | Write access is not required. | |
| fsBfdSessAuthenticationType | readonly | Write access is not required. | |
| fsBfdSessAuthenticationKeyID | readonly | Write access is not required. | |
| fsBfdSessAuthenticationKey | readonly | Write access is not required. | |
| fsBfdSessStorageType | readonly | Write access is not required. | |
| fsBfdSessRowStatus | readonly | Write access is not required. | |
| fsBfdSessDiscMapStorageType | readonly | Write access is not required. | |
| fsBfdSessDiscMapRowStatus | readonly | Write access is not required. | |
| fsBfdSessIpMapStorageType | readonly | Write access is not required. | |
| fsBfdSessIpMapRowStatus | readonly | Write access is not required. | |
| fsBfdSessIfName | readonly | Write access is not required. | |
| fsBfdSessIfDes | readonly | Write access is not required. |
Notifications / Traps (2)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.4.1.52642.1.1.10.2.48.0.1 |
This notification is generated when the
fsBfdSessState object for one or more contiguous entries in fsBfdSessTable are about to enter the up(4) state from some other state. The included values of fsBfdSessDiag MUST both be set equal to this new state (i.e: up(4)). The included values of fsBfdSessInterface MUST be set equal to interface index of bfd session(i.e: index(2)). The included values of fsBfdSessIfname MUST be set equal to interface name of bfd session(i.e: name(GigabitEthernet 0/1)). The two instances of fsBfdSessDiag in this notification indicate the range of indexes that are affected. Note that all the indexes of the two ends of the range can be derived from the instance identifiers of these two objects. For the cases where a contiguous range of sessions have transitioned into the up(4) state at roughly the same time, the device SHOULD issue a single notification for each range of contiguous indexes in an effort to minimize the emission of a large number of notifications. If a notification has to be issued for just a single fsBfdSessEntry, then the instance identifier (and values) of the two fsBfdSessDiag objects MUST be the identical. |
|
.1.3.6.1.4.1.52642.1.1.10.2.48.0.2 |
This notification is generated when the
fsBfdSessState object for one or more contiguous entries in fsBfdSessTable are about to enter the down(2) or adminDown(1) states from some other state. The included values of fsBfdSessDiag MUST both be set equal to this new state (i.e: down(2) or adminDown(1)). The included values of fsBfdSessInterface MUST be set equal to interface index of bfd session(i.e: index(2)). The included values of fsBfdSessIfname MUST be set equal to interface name of bfd session(i.e: name(GigabitEthernet 0/1)). The two instances of fsBfdSessDiag in this notification indicate the range of indexes that are affected. Note that all the indexes of the two ends of the range can be derived from the instance identifiers of these two objects. For cases where a contiguous range of sessions have transitioned into the down(2) or adminDown(1) states at roughly the same time, the device SHOULD issue a single notification for each range of contiguous indexes in an effort to minimize the emission of a large number of notifications. If a notification has to be issued for just a single fsBfdSessEntry, then the instance identifier (and values) of the two fsBfdSessDiag objects MUST be the identical. |