HH3C-NQA-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
12
Rows
12
Columns
178

hh3cNqaCtlTable

table
.1.3.6.1.4.1.25506.8.3.1.2 · 1 row entry · 16 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cNqaCtlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-NQA-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-NQA-MIB::hh3cNqaCtlTable' 
Defines the NQA Control Extend Table for providing, via SNMP,
the capability of performing network analysis operations at a
remote host.
hh3cNqaCtlEntry row .1.3.6.1.4.1.25506.8.3.1.2.1
Defines an entry in the hh3cNqaCtlTable. The operation of this
table is same as that of pingResultsTable.
Indexes
No indexes recorded
Column Syntax OID
hh3cNqaCtlTargetPort
The destination port that may be used by udpEcho,
tcpConnect and jitter probes.
Integer32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.25506.8.3.1.2.1.1
hh3cNqaCtlSourcePort
The source port that may be used by all tests except
for dns and dlsw.
If no source port is specified, system will create
a random port as source port.
Integer32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.25506.8.3.1.2.1.2
hh3cNqaCtlTTL
Specifies the value to store in the TTL Field in the IP packet used to
encapsulate the NQA probe.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.8.3.1.2.1.3
hh3cNqaCtlJitterAdminInterval
Time value in milliseconds that is an interval between two continuous
probes in jitter test.

This object is only used by jitter test.
millisecondsInteger32r/w
Constraints:
range: 0-60000
 .1.3.6.1.4.1.25506.8.3.1.2.1.4
hh3cNqaCtlJitterAdminNumPackets
Packet number that specifies how many packets will be sent in
one jitter test.

This object is only used by jitter test.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.8.3.1.2.1.5
hh3cNqaCtlHttpOperationType
Http operation type: get, post or raw.
Enumerationr/w
Enumerated Values:
1get
2post
3raw
 .1.3.6.1.4.1.25506.8.3.1.2.1.6
hh3cNqaCtlHttpOperationString
Http operation string. For example, if the http operation type is get,
the string will be url, home page and http version.
OctetStringr/w
Constraints:
range: 0-1023
 .1.3.6.1.4.1.25506.8.3.1.2.1.7
hh3cNqaCtlFtpOperationType
Ftp operation type.
Enumerationr/w
Enumerated Values:
1get
2put
 .1.3.6.1.4.1.25506.8.3.1.2.1.8
hh3cNqaCtlFtpUsername
Ftp username.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.25506.8.3.1.2.1.9
hh3cNqaCtlFtpPassword
Ftp password.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.25506.8.3.1.2.1.10
hh3cNqaCtlFtpOperationString
Ftp operation string. If the ftp operation type is get,
the string must be the file name which will be gotten from ftp server.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.25506.8.3.1.2.1.11
hh3cNqaCtlVPNInstance
VPN name by which system finds route in the specified VPN
to send NQA probe packets.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.25506.8.3.1.2.1.12
hh3cNqaCtlHistoryKeptTime
To indicate how long the history records will be saved
in the pingProbeHistoryTable table after the test stopped.
minutesInteger32r/w
Constraints:
range: 1-1440
 .1.3.6.1.4.1.25506.8.3.1.2.1.13
hh3cNqaCtlHistoryEnable
To indicate whether the history should be recorded in the
PingProbeHistoryTable or not.
enabled(1) --history will be recorded
disabled(2) --history will not be recorded.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.25506.8.3.1.2.1.14
hh3cNqaCtlICPIFAdvFactor
The advantage factor depends on the type of access and how the service
is to be used. This object will be used while calculating the ICPIF
(Calculated Planning Impairment Factor) values. This is applicable
only for the…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.8.3.1.2.1.15
hh3cNqaCtlCodecType
To indicate the codec type to be used with jitter probe. This is
applicable only for the jitter probe.
Enumerationr/w
Enumerated Values:
1notDefined
2g711Alaw
3g711Ulaw
4g729A
5icmpTimestamp
 .1.3.6.1.4.1.25506.8.3.1.2.1.16

hh3cNqaResultsTable

table
.1.3.6.1.4.1.25506.8.3.1.3 · 1 row entry · 20 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cNqaResultsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-NQA-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-NQA-MIB::hh3cNqaResultsTable' 
Defines the NQA Results Extend Table for providing
the capability of performing NQA operations at a remote
host. The results of these operations are stored in the
hh3cNqaResultsTable. The operation of this table is same
as that of pingResultsTable.
hh3cNqaResultsEntry row .1.3.6.1.4.1.25506.8.3.1.3.1
The operation of this table is same as that of pingResultsTable.
Indexes
Column Syntax OID
hh3cNqaResultsRttNumDisconnects
The number of times that a NQA probe failed because
the destination became disconnected.

For connectionless protocol pingCtlTypes, this number should be
zero.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.3.1.1
hh3cNqaResultsRttTimeouts
The number of times that a NQA probe failed because the
probe timed out.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.3.1.2
hh3cNqaResultsRttBusies
The number of times that a NQA probe failed because all
NQA tasks have been running.

If a new probe fails to start, the value of this object
is incremented. The next test will not start until the
next Fre…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.3.1.3
hh3cNqaResultsRttNoConnections
The number of times that a NQA probe failed because the probe
destination is unavailable.

For connectionless protocol pingCtlTypes, this number should be
zero.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.3.1.4
hh3cNqaResultsRttDrops
The number of times that a NQA operation failed to initiated
for unavailibility of necessary internal resources.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.3.1.5
hh3cNqaResultsRttSequenceErrors
The number of packets arrived out of sequence.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.3.1.6
hh3cNqaResultsRttStatsErrors
The number of some other errors.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.3.1.7
hh3cNqaResultsMaxDelaySD
The maximal delay from source device to destination device.
Currently this value is only used for jitter test, and this
value must be 0 in other type test. In jitter test, if
destination system time is not valid, the SD…
millisecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.3.1.8
hh3cNqaResultsMaxDelayDS
The maximal delay from destination device to source device.
Currently this value is only used for jitter test, and this
value is 0 in other type test. In jitter test, if destination
system time is not valid, the DS dela…
millisecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.3.1.9
hh3cNqaResultsLostPacketRatio
The value of this object reflects the drop rate of NQA test.
For example, this value is 30 that means source device only
had received 70% packets of total sent packets.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.3.1.10
hh3cNqaResultsPacketLateArrival
The value of this object indicates the number of the packets that
arrived after the timeout.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.3.1.11
hh3cNqaResultsRttSum
The sum of round trip time.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.3.1.12
hh3cNqaResultsNumOfDelaySD
The number of delay from source to destination that are
successfully measured.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.3.1.13
hh3cNqaResultsMinDelaySD
The minimum of all one way times from source to destination.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.3.1.14
hh3cNqaResultsSumDelaySD
The sum of one way times from source to destination.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.3.1.15
hh3cNqaResultsSum2DelaySD
The sum of squares of one way times from source to destination.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.3.1.16
hh3cNqaResultsNumOfDelayDS
The number of delay from destination to source that are
successfully measured.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.3.1.17
hh3cNqaResultsMinDelayDS
The minimum of all one way times from destination to source.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.3.1.18
hh3cNqaResultsSumDelayDS
The sum of one way times from destination to source.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.3.1.19
hh3cNqaResultsSum2DelayDS
The sum of squares of one way times from destination to source.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.3.1.20

hh3cNqaJitterStatsTable

table
.1.3.6.1.4.1.25506.8.3.1.4 · 1 row entry · 33 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cNqaJitterStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-NQA-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-NQA-MIB::hh3cNqaJitterStatsTable' 
Statistics table for latest jitter activity.
hh3cNqaJitterStatsEntry row .1.3.6.1.4.1.25506.8.3.1.4.1
An entry contains the statistics for the latest jitter activity.
This entry is created only if the pingCtlType is hh3cNqajitter.
Indexes
Column Syntax OID
hh3cNqaJitterStatsNumOfRTT
The number of received destination device responses with which
jitter test can reach round-trip time.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.4.1.1
hh3cNqaJitterStatsMinOfPositivesSD
The value of time that records the minimal positive jitter value from
source to destination in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.4.1.2
hh3cNqaJitterStatsMaxOfPositivesSD
The value of time that records the maximal positive jitter value from
source to destination in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.4.1.3
hh3cNqaJitterStatsNumOfPositivesSD
The number that records positive jitter times from source to
destination in the jitter test.
The total number of the value of all positive jitters in packets
sent from source to destination.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.4.1.4
hh3cNqaJitterStatsSumOfPositivesSD
The value of time that records the sum of positive jitter values from
source to destination in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.4.1.5
hh3cNqaJitterStatsSum2PositivesSD
The value of time that records the sum of square of positive jitter
values from source to destination in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.4.1.6
hh3cNqaJitterStatsMinOfNegativesSD
The value of time that records the minimal absolute values of
negative jitter value from source to destination in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.4.1.7
hh3cNqaJitterStatsMaxOfNegativesSD
The value of time that records the maximal absolute values of negative
jitter value from source to destination in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.4.1.8
hh3cNqaJitterStatsNumOfNegativesSD
The number that records negative jitter times from source to
destination in the jitter test.
The total number of all negative jitter values in packets
sent from source to destination.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.4.1.9
hh3cNqaJitterStatsSumOfNegativesSD
The value of time that records the sum of negative jitter values from
source to destination in the jitter test.
The total number of the value of all negative jitters in packets
sent from source to destination.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.4.1.10
hh3cNqaJitterStatsSum2NegativesSD
The value of time that records the sum of square of negative jitter
values from source to destination in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.4.1.11
hh3cNqaJitterStatsMinOfPositivesDS
The value of time that records the minimal positive jitter value from
destination to source in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.4.1.12
hh3cNqaJitterStatsMaxOfPositivesDS
The value of time that records the maximal positive jitter value from
destination to source in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.4.1.13
hh3cNqaJitterStatsNumOfPositivesDS
The number that records positive jitter times from destination to
source in the jitter test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.4.1.14
hh3cNqaJitterStatsSumOfPositivesDS
The value of time that records the sum of positive jitter values from
destination to source in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.4.1.15
hh3cNqaJitterStatsSum2PositivesDS
The value of time that records the sum of square of positive jitter
values from destination to source in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.4.1.16
hh3cNqaJitterStatsMinOfNegativesDS
The value of time that records the minimal absolute values of negative
jitter value from destination to source in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.4.1.17
hh3cNqaJitterStatsMaxOfNegativesDS
The value of time that records the maximal absolute values of negative
jitter value from destination to source in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.4.1.18
hh3cNqaJitterStatsNumOfNegativesDS
The number that records negative jitter times from destination to source
in the jitter test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.4.1.19
hh3cNqaJitterStatsSumOfNegativesDS
The value of time that records the sum of negative jitter values from
destination to source in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.4.1.20
hh3cNqaJitterStatsSum2NegativesDS
The value of time that records the sum of square of negative jitter
values from destination to source in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.4.1.21
hh3cNqaJitterStatsPacketLossSD
The lost packets number sent from source to destination.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.4.1.22
hh3cNqaJitterStatsPacketLossDS
The lost packets number sent from destination to source.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.4.1.23
hh3cNqaJitterStatsAvePositivesSD
The value of time that records the average positive jitter value
from source to destination.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.4.1.24
hh3cNqaJitterStatsAveNegativesSD
The value of time that records the average negative jitter value
from source to destination.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.4.1.25
hh3cNqaJitterStatsAvePositivesDS
The value of time that records the average positive jitter value
from destination to source.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.4.1.26
hh3cNqaJitterStatsAveNegativesDS
The value of time that records the average negative jitter value
from destination to source.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.4.1.27
hh3cNqaJitterStatsPktLossUnknown
The number of packets which is lost with unknown reason.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.4.1.28
hh3cNqaJitterStatsOperOfICPIF
The ICPIF (Calculated Planning Impairment Factor) value for the latest
jitter test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.4.1.29
hh3cNqaJitterStatsOperOfMOS
The MOS (Mean Opinion Score) value for the latest jitter test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.4.1.30
hh3cNqaJitterStatsAveSD
The value of time that records the average jitter value
from source to destination.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.4.1.31
hh3cNqaJitterStatsAveDS
The value of time that records the average jitter value
from destination to source.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.4.1.32
hh3cNqaJitterStatsLostPacketPermillage
The value of this object reflects the drop rate of NQA
test packet.
For example, if the value is 100, that means source device
only had received 900 packets per thousand.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.4.1.33

hh3cNqaTcpServerTable

table
.1.3.6.1.4.1.25506.8.3.1.6 · 1 row entry · 3 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cNqaTcpServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-NQA-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-NQA-MIB::hh3cNqaTcpServerTable' 
A table which contains the status of NQA tcp server
configuration information.
hh3cNqaTcpServerEntry row .1.3.6.1.4.1.25506.8.3.1.6.1
A table which contains the status of NQA tcp server
configuration information.

This entry includes not only the tcp server ip address
but also the tcp server port.
Indexes
Column Syntax OID
hh3cNqaTcpServerIpAddress
Tcp server's ip address.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.25506.8.3.1.6.1.1
hh3cNqaTcpServerPort
Tcp server's port number.
Integer32
Constraints:
range: 0-65536
 .1.3.6.1.4.1.25506.8.3.1.6.1.2
hh3cNqaTcpServerRowStatus
hh3cNqaTcpServerIpAddress and hh3cNqaTcpServerPort
must be set during a creation operation.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.25506.8.3.1.6.1.3

hh3cNqaUdpServerTable

table
.1.3.6.1.4.1.25506.8.3.1.7 · 1 row entry · 3 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cNqaUdpServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-NQA-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-NQA-MIB::hh3cNqaUdpServerTable' 
Status of NQA udp server configuration information.
hh3cNqaUdpServerEntry row .1.3.6.1.4.1.25506.8.3.1.7.1
This entry includes not only the udp server ip address
but also the udp server udp port.
Indexes
Column Syntax OID
hh3cNqaUdpServerIpAddress
Udp server's ip address.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.25506.8.3.1.7.1.1
hh3cNqaUdpServerPort
Udp server's port number.
Integer32
Constraints:
range: 0-65536
 .1.3.6.1.4.1.25506.8.3.1.7.1.2
hh3cNqaUdpServerRowStatus
hh3cNqaUdpServerIpAddress and hh3cNqaUdpServerPort
must be set during a creation operation.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.25506.8.3.1.7.1.3

hh3cNqaStatisticsCtlTable

table
.1.3.6.1.4.1.25506.8.3.1.10 · 1 row entry · 5 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cNqaStatisticsCtlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-NQA-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-NQA-MIB::hh3cNqaStatisticsCtlTable' 
Defines the NQA statistics control table for providing, via SNMP,
the capability of performing NQA operations at a remote host.
The results of these operations are stored in the
hh3cNqaStatisticsResultsTable and the hh3cNqaGroupStatsJitterTable.
hh3cNqaStatisticsCtlEntry row .1.3.6.1.4.1.25506.8.3.1.10.1
Defines an entry in the hh3cNqaStatisticsCtlTable.
The hh3cNqaStatisticsCtlTable has the same index as the
pingCtlTable in order for a hh3cNqaStatisticsCtlTable to
correspond to the pingCtlEntry.
Indexes
No indexes recorded
Column Syntax OID
hh3cNqaCtlStatisticsInterval
Statistic information will be calculated after the time that is
the value of hh3cNqaCtlStatisticsInterval.
minutesSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.10.1.1
hh3cNqaCtlStatisticsGroupNumber
The value of this object indicates the number of group saved.
The length of this object is from 1 to hh3cNqaStatsMaxGroupNumber.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.10.1.2
hh3cNqaCtlStatisticsKeptTime
To indicate how long the statistic information will be saved after
the test stops.
minutesUnsigned32r/w
Constraints:
range: 1-1440
 .1.3.6.1.4.1.25506.8.3.1.10.1.3
hh3cNqaCtlBeginTime
Time at which the type-specified test will start.
SNMPv2-TCDateAndTimer/w
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.25506.8.3.1.10.1.4
hh3cNqaCtlLifeTime
To indicate how long the type-specified test will last.
secondsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.10.1.5

hh3cNqaStatisticsResultsTable

table
.1.3.6.1.4.1.25506.8.3.1.11 · 1 row entry · 32 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cNqaStatisticsResultsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-NQA-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-NQA-MIB::hh3cNqaStatisticsResultsTable' 
Defines the NQA statistics results table for providing
the capability of performing NQA operations at a remote
host. The statistics results of these operations in a statistic cycle
are stored in the hh3cNqaStatisticsResultsTable. The statistic cycle is
the value of hh3cNqaCtlStatisticsInterval.
The first two index identify the pingCtlEntry that the probe statistics
result (Hh3cNqaStatisticsResultsEntry) belongs to.
hh3cNqaStatisticsResultsEntry row .1.3.6.1.4.1.25506.8.3.1.11.1
Defines an entry in the hh3cNqaStatisticsResultsTable. The
hh3cNqaStatisticsResultsTable has the same index as the
pingCtlTable in order for a hh3cNqaStatisticsResultsEntry to
correspond to the pingCtlEntry that caused …
Indexes
Column Syntax OID
hh3cNqaStatResIndex
An entry in this table is created when the statistics
result of a NQA probe is determined.

An implementation MUST start assigning
hh3cNqaStatResIndex values at 1 and wrap after
exceeding the maximum possi…
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.25506.8.3.1.11.1.1
hh3cNqaStatResIpTargetAddressType
This object indicates the type of address stored
in the corresponding hh3cNqaStatResIpTargetAddress
object.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.25506.8.3.1.11.1.2
hh3cNqaStatResIpTargetAddress
This object represent the host address to be used at a remote host for
performing a network analysis operation.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.25506.8.3.1.11.1.3
hh3cNqaStatResMinRtt
The minimum NQA probe round-trip-time (RTT) received. The value
of 0 for this object implies that no RTT has been received.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.11.1.4
hh3cNqaStatResMaxRtt
The maximum NQA probe round-trip-time (RTT) received. The value
of 0 for this object implies that no RTT has been received.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.11.1.5
hh3cNqaStatResAverageRtt
The average NQA probe round-trip-time (RTT).
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.11.1.6
hh3cNqaStatResProbeResponses
The number of responses received. The value of this object
MUST be reported as 0 when no probe responses have been
received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.11.1.7
hh3cNqaStatResSentProbes
The value of this object reflects the number of probes sent.
The value of this object MUST be reported as 0 when no probes
have been sent.
probesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.11.1.8
hh3cNqaStatResRttSumOfSquares
This object contains the sum of the squares for all NQA
responses received. The value of this object MUST
be reported as 0 when no NQA responses have been
received.
millisecondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.11.1.9
hh3cNqaStatResStartTime
This object contains the start time of the statistic.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.25506.8.3.1.11.1.10
hh3cNqaStatResInterval
This object contains the interval between two times of statistic.
secondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.11.1.11
hh3cNqaStatResRttNumDisconnects
The number of times that a NQA probe failed because the destination
became disconnected.
For connectionless protocol pingCtlTypes, this number should be
zero.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.11.1.12
hh3cNqaStatResRttTimeouts
The number of times that a probe failed because the probe timed out.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.11.1.13
hh3cNqaStatResRttBusies
The number of times that a NQA probe failed because
errors related to sockets.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.11.1.14
hh3cNqaStatResRttNoConnections
The number of times that a NQA probe failed because the
probe destination is unavailable.
For connectionless protocol pingCtlTypes, this number should be
zero.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.11.1.15
hh3cNqaStatResRttDrops
The number of times that a NQA operation failed to initiate
for unavailibility of necessary internal resources.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.11.1.16
hh3cNqaStatResRttSequenceErrors
The number of packets arrived out of sequence.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.11.1.17
hh3cNqaStatResRttErrors
The number of other errors.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.11.1.18
hh3cNqaStatResLostPacketRatio
The value of this object reflects the drop rate of NQA
test packet.
For example, if the value is 30, that means source device
only had received 70 percent packets of total sent packets.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.11.1.19
hh3cNqaStatResPacketLateArrival
The value of this object reflects the number of the packets that
arrived after the timeout.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.11.1.20
hh3cNqaStatResRttSum
This object contains the sum for all NQA responses received
during the test lifetime. The value of this object MUST be
reported as 0 when no NQA responses have been received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.11.1.21
hh3cNqaStatResNumOfDelaySD
The number of one way times from source to destination that are
successfully measured.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.11.1.22
hh3cNqaStatResMinDelaySD
The minimum one way times from source to destination.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.11.1.23
hh3cNqaStatResMaxDelaySD
The maximum one way times from source to destination.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.11.1.24
hh3cNqaStatResSumDelaySD
The sum of one way times from source to destination.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.11.1.25
hh3cNqaStatResSum2DelaySD
The sum of squares of one way times from source to destination.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.11.1.26
hh3cNqaStatResNumOfDelayDS
The number of one way times from destination to source that are
successfully measured.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.11.1.27
hh3cNqaStatResMinDelayDS
The minimum one way times from destination to source.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.11.1.28
hh3cNqaStatResMaxDelayDS
The maximum one way times from destination to source.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.11.1.29
hh3cNqaStatResSumDelayDS
The sum of one way times from destination to source.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.11.1.30
hh3cNqaStatResSum2DelayDS
The sum of squares of one way times from destination to source.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.11.1.31
hh3cNqaStatResLostPacketPermillage
The value of this object reflects the drop rate of NQA
test packet.
For example, if the value is 100, that means source device
only had received 900 packets per thousand.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.11.1.32

hh3cNqaGroupStatsJitterTable

table
.1.3.6.1.4.1.25506.8.3.1.12 · 1 row entry · 34 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cNqaGroupStatsJitterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-NQA-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-NQA-MIB::hh3cNqaGroupStatsJitterTable' 
Test Group Statistic table for jitter activity in a statistic cycle.
The statistic cycle is the value of hh3cNqaCtlStatisticsInterval.
The first two index identify the pingCtlEntry that a probe statistics
result (Hh3cNqaStatisticsResultsEntry) belongs to.
hh3cNqaGroupStatsJitterEntry row .1.3.6.1.4.1.25506.8.3.1.12.1
An entry contains the group statistic information for jitter activity.
This entry is created only if the pingCtlType is hh3cNqajitter.
Indexes
Column Syntax OID
hh3cNqaStatJitterIndex
An entry in this table is created when the statistic
result of a NQA probe in a statistic cycle is determined.

An implementation MUST start assigning hh3cNqaStatJitterIndex
values at 1 and wrap after exce…
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.25506.8.3.1.12.1.1
hh3cNqaStatJitterMinOfPosSD
The value of time that records the minimal positive jitter value
from source to destination in jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.12.1.2
hh3cNqaStatJitterMaxOfPosSD
The value of time that records the maximal positive jitter value
from source to destination in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.12.1.3
hh3cNqaStatJitterNumOfPosSD
The total number of positive jitters from source to destination in the
jitter test.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.12.1.4
hh3cNqaStatJitterSumOfPosSD
The value of time that records the sum of positive jitter values
from source to destination in the jitter test.
millisecondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.12.1.5
hh3cNqaStatJitterSumOfSquarePosSD
The value of time that records the sum of square of positive jitter
values from source to destination in the jitter test.
millisecondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.12.1.6
hh3cNqaStatJitterMinOfNegSD
The value of time that records the minimal absolute values of
negative jitter value from source to destination in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.12.1.7
hh3cNqaStatJitterMaxOfNegSD
The value of time that records the maximal absolute values of negative
jitter value from source to destination in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.12.1.8
hh3cNqaStatJitterNumOfNegSD
The total number of negative jitters from source to destination in the
jitter test.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.12.1.9
hh3cNqaStatJitterSumOfNegSD
The value of time that records the sum of negative jitter values
from source to destination in the jitter test.
millisecondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.12.1.10
hh3cNqaStatJitterSumOfSquareNegSD
The value of time that records the sum of square of negative jitter
values from source to destination in the jitter test.
millisecondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.12.1.11
hh3cNqaStatJitterMinOfPosDS
The value of time that records the minimal positive jitter value
from destination to source in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.12.1.12
hh3cNqaStatJitterMaxOfPosDS
The value of time that records the maximal positive jitter value
from destination to source in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.12.1.13
hh3cNqaStatJitterNumOfPosDS
The total number of positive jitters from destination to source in the
jitter test.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.12.1.14
hh3cNqaStatJitterSumOfPosDS
The value of time that records the sum of positive jitter values
from destination to source in the jitter test.
millisecondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.12.1.15
hh3cNqaStatJitterSumOfSquarePosDS
The value of time that records the sum of square of positive jitter
values destination to source in the jitter test.
millisecondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.12.1.16
hh3cNqaStatJitterMinOfNegDS
The value of time that records the minimal absolute values of negative
jitter value from destination to source in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.12.1.17
hh3cNqaStatJitterMaxOfNegDS
The value of time that records the maximal absolute values of negative
jitter value from destination to source in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.12.1.18
hh3cNqaStatJitterNumOfNegDS
The total number of negative jitters from destination to source in the
jitter test.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.12.1.19
hh3cNqaStatJitterSumOfNegDS
The value of time that records the sum of negative jitter values
from destination to source in the jitter test.
millisecondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.12.1.20
hh3cNqaStatJitterSumOfSquareNegDS
The value of time that records the sum of square of negative jitter
values from destination to source in the jitter test.
millisecondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.12.1.21
hh3cNqaStatJitterPacketLossSD
The lost packets number sent from source to destination.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.12.1.22
hh3cNqaStatJitterPacketLossDS
The lost packets number sent from destination to source.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.12.1.23
hh3cNqaStatJitterAvePosSD
The value of time that records the average positive jitter value
from source to destination.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.12.1.24
hh3cNqaStatJitterAveNegSD
The value of time that records the average negative jitter value
from source to destination.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.12.1.25
hh3cNqaStatJitterAvePosDS
The value of time that records the average positive jitter value
from destination to source.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.12.1.26
hh3cNqaStatJitterAveNegDS
The value of time that records the average negative jitter value
from destination to source.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.12.1.27
hh3cNqaStatJitterPktLossUnknown
The number of packets which is lost with unknown reason.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.12.1.28
hh3cNqaStatJitterMaxOfICPIF
The maximum of all ICPIF values in a statistic cycle for jitter test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.12.1.29
hh3cNqaStatJitterMinOfICPIF
The minimum of all ICPIF values in a statistic cycle for jitter test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.12.1.30
hh3cNqaStatJitterMaxOfMOS
The maximum of all MOS values in a statistic cycle for jitter test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.12.1.31
hh3cNqaStatJitterMinOfMOS
The minimum of all MOS values in a statistic cycle for jitter test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.12.1.32
hh3cNqaStatJitterAveSD
The value of time that records the average jitter value
from source to destination.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.12.1.33
hh3cNqaStatJitterAveDS
The value of time that records the average jitter value
from destination to source.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.12.1.34

hh3cNqaReactionTable

table
.1.3.6.1.4.1.25506.8.3.1.13 · 1 row entry · 14 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cNqaReactionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-NQA-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-NQA-MIB::hh3cNqaReactionTable' 
A table of NQA test monitoring notification and
reaction configuration definitions.
          
An entry is removed from this table when its
corresponding pingCtlEntry is deleted.
          
 When PingCtlType of the test is hh3cNqaTwampLight,
 it does not support the table.
hh3cNqaReactionEntry row .1.3.6.1.4.1.25506.8.3.1.13.1
Defines an entry in the hh3cNqaReactionTable. The first two index
elements identify the pingCtlEntry that a hh3cNqaReactItemIndex
belongs to. The third index element selects a single reaction.
Indexes
Column Syntax OID
hh3cNqaReactOwnerIndex
The first index of hh3cNqaReactionTable, it is the same as
pingCtlOwnerIndex in pingCtlTable. hh3cNqaReactOwnerIndex and
hh3cNqaReactTestName identify an existed test.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.25506.8.3.1.13.1.1
hh3cNqaReactTestName
The second index of hh3cNqaReactionTable, it is the same as
pingCtlTestName in pingCtlTable. hh3cNqaReactOwnerIndex and
hh3cNqaReactTestName identify an existed test.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.25506.8.3.1.13.1.2
hh3cNqaReactItemIndex
The third index of hh3cNqaReactionTable, it definitely
identifies one of the reaction configurations for a test.
Unsigned32
Constraints:
range: 1-10
 .1.3.6.1.4.1.25506.8.3.1.13.1.3
hh3cNqaReactCheckedElement
A list of reaction condition type.
'probetime' and 'probefailure' are valid when pingCtlType of
the test is not hh3cNqajitter.

'jitterOwdSD': one way delay from source to destination in
jit…
Enumerationr/w
Enumerated Values:
1probetime
2probefailure
3jitterrtt
4jitterpacketloss
5jittersd
6jitterds
7icpif
8mos
9jitterOwdSD
10jitterOwdDS
11testfailure
12testresultchange
 .1.3.6.1.4.1.25506.8.3.1.13.1.4
hh3cNqaReactThresholdUpperLimit
This object defines an administrative upper-threshold value for
hh3cNqaReactCheckedElement.

The value of this object is zero if hh3cNqaReactCheckedElement is
specified as 'jitterpacketloss' and 'probefail…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.13.1.5
hh3cNqaReactThresholdLowerLimit
This object defines an administrative lower-threshold value for
hh3cNqaReactCheckedElement.

The value of hh3cNqaReactThresholdLowerLimit should be equal or less
than the value of hh3cNqaReactThresholdUppe…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.13.1.6
hh3cNqaReactThresholdType
This object defines the reaction threshold types.

invalid(0): Invalid value.

average(1): If reaction threshold type is average and the average
value of watched opera…
Enumerationr/w
Enumerated Values:
0invalid
1average
2consecutive
3accumulative
 .1.3.6.1.4.1.25506.8.3.1.13.1.7
hh3cNqaReactThresholdConsecNum
This object defines a consecutive threshold limit.

The value is zero when hh3cNqaReactThresholdType
is not 'consecutive'.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.13.1.8
hh3cNqaReactThresholdAccumNum
This object defines an accumulative threshold limit.

The value is zero when the hh3cNqaReactThresholdType
is not 'accumulative'.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.13.1.9
hh3cNqaReactActionType
Specifies the type of reaction to generate if the specified
violation type occurs for the monitored element:

none - No reaction is generated
trapOnly - A trap is generated
triggerO…
Enumerationr/w
Enumerated Values:
0none
1trapOnly
2triggerOnly
3trapAndTrigger
 .1.3.6.1.4.1.25506.8.3.1.13.1.10
hh3cNqaReactCurrentStatus
Specifies the current status of this reaction entry:

invalid - The status of the reaction entry is unknown.

overThreshold - The status of the reaction entry is overThreshold
…
Enumeration
Enumerated Values:
1invalid
2overThreshold
3belowThreshold
4overUpperThreshold
5belowLowerThreshold
 .1.3.6.1.4.1.25506.8.3.1.13.1.11
hh3cNqaReactRowStatus
This object allows entries to be created and deleted
in the hh3cNqaReactionTable.

Creation of an entry in this table results in a new set of reaction
configurations which take effect immediately.
…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.25506.8.3.1.13.1.12
hh3cNqaReactCheckedNum
The number of checked element samples that are monitored.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.13.1.13
hh3cNqaReactThresholdNum
The number of checked element samples that are over threshold.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.13.1.14

hh3cNqaStatisticsReactionTable

table
.1.3.6.1.4.1.25506.8.3.1.14 · 1 row entry · 6 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cNqaStatisticsReactionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-NQA-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-NQA-MIB::hh3cNqaStatisticsReactionTable' 
A table of NQA test monitoring notification and
reaction configuration definitions.
          
An entry is removed from this table when its
corresponding pingCtlEntry is deleted.
hh3cNqaStatisticsReactionEntry row .1.3.6.1.4.1.25506.8.3.1.14.1
Defines an entry in the hh3cNqaStatisticsReactionTable. The
first two index elements identify the pingCtlEntry that a
hh3cNqaReactItemIndex belongs to. The third index element
identifies an entry in the hh3cNqaStatistic…
Indexes
Column Syntax OID
hh3cNqaStatReactOwnerIndex
The first index of hh3cNqaStatisticsReactionTable, it is the same
as pingCtlOwnerIndex in pingCtlTable.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.25506.8.3.1.14.1.1
hh3cNqaStatReactTestName
The second index of hh3cNqaStatisticsReactionTable, it is the same
as pingCtlTestName in pingCtlTable.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.25506.8.3.1.14.1.2
hh3cNqaStatReactIndex
The third index of hh3cNqaStatisticsReactionTable. An entry in
this table is created when the statistics result of a NQA probe
is determined.

An implementation MUST start assigning hh3cNqaStatResIndex val…
Unsigned32
Constraints:
range: 1-10
 .1.3.6.1.4.1.25506.8.3.1.14.1.3
hh3cNqaStatReactItemIndex
The forth index of hh3cNqaStatisticsReactionTable, it definitely
identifies one of the reaction configurations for a test
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.25506.8.3.1.14.1.4
hh3cNqaStatReactCheckedNum
The number of checked element samples that are monitored.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.14.1.5
hh3cNqaStatReactThresholdNum
The number of checked element samples that are over threshold.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.3.1.14.1.6

hh3cNqaTcpServerExtendTable

table
.1.3.6.1.4.1.25506.8.3.1.15 · 1 row entry · 6 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cNqaTcpServerExtendTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-NQA-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-NQA-MIB::hh3cNqaTcpServerExtendTable' 
A table which contains the status of extended NQA TCP server
configuration information.
hh3cNqaTcpServerExtendEntry row .1.3.6.1.4.1.25506.8.3.1.15.1
A table which contains the status of extended NQA TCP server
configuration information.
This entry includes the TCP server IP address, port,
VPN name and DSField.
Indexes
Column Syntax OID
hh3cNqaTcpServerExtIpAddress
TCP server's IP address.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.25506.8.3.1.15.1.1
hh3cNqaTcpServerExtPort
TCP server's port number.
Integer32
Constraints:
range: 0-65536
 .1.3.6.1.4.1.25506.8.3.1.15.1.2
hh3cNqaTcpServerExtVPNType
TCP server's VPN instance type.
VpnInstanceType
Type Values:
1public
2vpn
 .1.3.6.1.4.1.25506.8.3.1.15.1.3
hh3cNqaTcpServerExtVPNInstance
TCP server's VPN name.If the NQA server listens on the public network,
the value of hh3cNqaTcpServerExtVPNType must be public(1) and the value
of this object can be set to any non-printable character string.If the
NQA s…
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.25506.8.3.1.15.1.4
hh3cNqaTcpServerExtDSField
Specifies the value to store in the Differentiated
Services (DS) Field in the IP packet used to
encapsulate the probe. The DS Field is defined
as the Type of Service (TOS) octet in a IPv4 header
or as the Traffic Class…
Unsigned32r/w
Constraints:
range: 0-256
 .1.3.6.1.4.1.25506.8.3.1.15.1.5
hh3cNqaTcpServerExtRowStatus
hh3cNqaTcpServerIpAddress, hh3cNqaTcpServerPort, hh3cNqaTcpServerExtVPNType
and hh3cNqaTcpServerVPNInstance must be set during a creation operation.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.25506.8.3.1.15.1.6

hh3cNqaUdpServerExtendTable

table
.1.3.6.1.4.1.25506.8.3.1.16 · 1 row entry · 6 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cNqaUdpServerExtendTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-NQA-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-NQA-MIB::hh3cNqaUdpServerExtendTable' 
Status of extended NQA UDP server configuration information.
hh3cNqaUdpServerExtendEntry row .1.3.6.1.4.1.25506.8.3.1.16.1
A table which contains the status of extended NQA UDP server
configuration information.
This entry includes the UDP server IP address, port,
VPN name and DSField.
Indexes
Column Syntax OID
hh3cNqaUdpServerExtIpAddress
UDP server's IP address.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.25506.8.3.1.16.1.1
hh3cNqaUdpServerExtPort
UDP server's port number.
Integer32
Constraints:
range: 0-65536
 .1.3.6.1.4.1.25506.8.3.1.16.1.2
hh3cNqaUdpServerExtVPNType
UDP server's VPN instance type.
VpnInstanceType
Type Values:
1public
2vpn
 .1.3.6.1.4.1.25506.8.3.1.16.1.3
hh3cNqaUdpServerExtVPNInstance
UDP server's VPN name.If the NQA server listens on the public network,
the value of hh3cNqaUdpServerExtVPNType must be public(1) and the value
of this object can be set to any non-printable character string.If the
NQA s…
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.25506.8.3.1.16.1.4
hh3cNqaUdpServerExtDSField
Specifies the value to store in the Differentiated
Services (DS) Field in the IP packet used to
encapsulate the probe. The DS Field is defined
as the Type of Service (TOS) octet in a IPv4 header
or as the Traffic Class…
Unsigned32r/w
Constraints:
range: 0-256
 .1.3.6.1.4.1.25506.8.3.1.16.1.5
hh3cNqaUdpServerExtRowStatus
hh3cNqaUdpServerIpAddress, hh3cNqaUdpServerPort, hh3cNqaUdpServerExtVPNType
and hh3cNqaUdpServerVPNInstance must be set during a creation operation.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.25506.8.3.1.16.1.6