HDSL2-SHDSL-LINE-MIB Table View

This table supports overall configuration of HDSL2/SHDSL
spans.  Entries in this table MUST be maintained in a
persistent manner.

hdsl2ShdslSpanConfEntry row .1.3.6.1.2.1.10.48.1.1.1

An entry in the hdsl2ShdslSpanConfTable. Each entry
represents the complete span in a single HDSL2/SHDSL line.
It is indexed by the ifIndex of the associated HDSL2/SHDSL
line.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hdsl2ShdslSpanConfNumRepeaters This object provisions the number of repeaters/regenerators in this HDSL2/SHDSL span.	repeatersUnsigned32r/w Constraints: range: 0-8	.1.3.6.1.2.1.10.48.1.1.1.1
hdsl2ShdslSpanConfProfile This object is a pointer to a span configuration profile in the hdsl2ShdslSpanConfProfileTable, which applies to this span. The value of this object is the index of the referenced profile in the hdsl2ShdslSpanConfProfi…	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.2.1.10.48.1.1.1.2
hdsl2ShdslSpanConfAlarmProfile This object is a pointer to an alarm configuration profile in the hdsl2ShdslEndpointAlarmConfProfileTable. The value of this object is the index of the referenced profile in the hdsl2ShdslEndpointAlarmConfProfileTable.…	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.2.1.10.48.1.1.1.3

This table provides overall status information of
HDSL2/SHDSL spans.  This table contains live data from
equipment.  As such, it is NOT persistent.

hdsl2ShdslSpanStatusEntry row .1.3.6.1.2.1.10.48.1.2.1

An entry in the hdsl2ShdslSpanStatusTable. Each entry
represents the complete span in a single HDSL2/SHDSL line.
It is indexed by the ifIndex of the associated HDSL2/SHDSL
line.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hdsl2ShdslStatusNumAvailRepeaters Contains the actual number of repeaters/regenerators discovered in this HDSL2/SHDSL span.	Unsigned32 Constraints: range: 0-8	.1.3.6.1.2.1.10.48.1.2.1.1
hdsl2ShdslStatusMaxAttainableLineRate Contains the maximum attainable line rate in this HDSL2/SHDSL span. This object provides the maximum rate the line is capable of achieving. This is based upon measurements made during line probing. This rate includes…	bpsUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.2.1.10.48.1.2.1.2
hdsl2ShdslStatusActualLineRate Contains the actual line rate in this HDSL2/SHDSL span. This SHOULD equal ifSpeed. This rate includes payload (user data) and any applicable framing overhead	bpsUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.2.1.10.48.1.2.1.3
hdsl2ShdslStatusTransmissionModeCurrent Contains the current Power Spectral Density (PSD) regional setting of the HDSL2/SHDSL span.	Hdsl2ShdslTransmissionModeType Type Values: 0 region1 1 region2	.1.3.6.1.2.1.10.48.1.2.1.4
hdsl2ShdslStatusMaxAttainablePayloadRate Contains the maximum attainable payload (user data) line rate in this HDSL2/SHDSL span. This object provides the maximum rate the line is capable of achieving. This is based upon measurements made during line probing.…	bpsUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.2.1.10.48.1.2.1.5
hdsl2ShdslStatusActualPayloadRate Contains the actual line rate in this HDSL2/SHDSL span. Any framing overhead is not included.	bpsUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.2.1.10.48.1.2.1.6

This table supports retrieval of unit inventory information
available via the EOC from units in an HDSL2/SHDSL line.
          
Entries in this table are dynamically created during the
line discovery process.  The life cycle for these entries
is as follows:
          
   - xtu discovers a device, either a far-end xtu or an xru
   - an inventory table entry is created for the device
   - the line goes down for whatever reason
   - inventory table entries for unreachable devices are
     destroyed
          
As these entries are created/destroyed dynamically, they
are NOT persistent.

hdsl2ShdslInventoryEntry row .1.3.6.1.2.1.10.48.1.3.1

An entry in the hdsl2ShdslInventoryTable. Each entry
represents inventory information for a single unit in an
HDSL2/SHDSL line. It is indexed by the ifIndex of the
HDSL2/SHDSL line and the Hdsl2ShdslUnitId of the
asso…

Indexes

IF-MIBifIndex hdsl2ShdslInvIndex

Column	Syntax	OID
hdsl2ShdslInvIndex Each entry in this table corresponds to a physical element in an HDSL2/SHDSL span. It is based on the EOC unit addressing scheme with reference to the xtuC.	Hdsl2ShdslUnitId Type Values: 1 xtuC 2 xtuR 3 xru1 4 xru2 5 xru3 6 xru4 7 xru5 8 xru6 9 xru7 10 xru8	.1.3.6.1.2.1.10.48.1.3.1.1
hdsl2ShdslInvVendorID Vendor ID as reported in an Inventory Response message.	OctetString Constraints: range: 8-8	.1.3.6.1.2.1.10.48.1.3.1.2
hdsl2ShdslInvVendorModelNumber Vendor model number as reported in an Inventory Response message.	OctetString Constraints: range: 12-12	.1.3.6.1.2.1.10.48.1.3.1.3
hdsl2ShdslInvVendorSerialNumber Vendor serial number as reported in an Inventory Response message.	OctetString Constraints: range: 12-12	.1.3.6.1.2.1.10.48.1.3.1.4
hdsl2ShdslInvVendorEOCSoftwareVersion Vendor EOC version as reported in a Discovery Response message.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.10.48.1.3.1.5
hdsl2ShdslInvStandardVersion Version of the HDSL2/SHDSL standard implemented, as reported in an Inventory Response message.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.10.48.1.3.1.6
hdsl2ShdslInvVendorListNumber Vendor list number as reported in an Inventory Response message.	OctetString Constraints: range: 3-3	.1.3.6.1.2.1.10.48.1.3.1.7
hdsl2ShdslInvVendorIssueNumber Vendor issue number as reported in an Inventory Response message.	OctetString Constraints: range: 2-2	.1.3.6.1.2.1.10.48.1.3.1.8
hdsl2ShdslInvVendorSoftwareVersion Vendor software version as reported in an Inventory Response message.	OctetString Constraints: range: 6-6	.1.3.6.1.2.1.10.48.1.3.1.9
hdsl2ShdslInvEquipmentCode Equipment code conforming to ANSI T1.213, Coded Identification of Equipment Entities.	OctetString Constraints: range: 10-10	.1.3.6.1.2.1.10.48.1.3.1.10
hdsl2ShdslInvVendorOther Other vendor information as reported in an Inventory Response message.	OctetString Constraints: range: 12-12	.1.3.6.1.2.1.10.48.1.3.1.11
hdsl2ShdslInvTransmissionModeCapability Contains the transmission mode capability of the SHDSL unit.	Hdsl2ShdslTransmissionModeType Type Values: 0 region1 1 region2	.1.3.6.1.2.1.10.48.1.3.1.12

This table supports configuration parameters for segment
endpoints in an HDSL2/SHDSL line.  As this table is indexed
by ifIndex, it MUST be maintained in a persistent manner.

hdsl2ShdslEndpointConfEntry row .1.3.6.1.2.1.10.48.1.4.1

An entry in the hdsl2ShdslEndpointConfTable. Each entry
represents a single segment endpoint in an HDSL2/SHDSL line.
It is indexed by the ifIndex of the HDSL2/SHDSL line, the
UnitId of the associated unit, the side of …

Indexes

IF-MIBifIndex hdsl2ShdslInvIndex hdsl2ShdslEndpointSide hdsl2ShdslEndpointWirePair

Column	Syntax	OID
hdsl2ShdslEndpointSide The side of the unit associated with this segment endpoint -- Network/Customer side -- as per the Hdsl2ShdslUnitSide textual convention.	Hdsl2ShdslUnitSide Type Values: 1 networkSide 2 customerSide	.1.3.6.1.2.1.10.48.1.4.1.1
hdsl2ShdslEndpointWirePair The wire pair of the modem associated with this segment endpoint as per the Hdsl2ShdslWirePair textual convention.	Hdsl2ShdslWirePair Type Values: 1 wirePair1 2 wirePair2 3 wirePair3 4 wirePair4	.1.3.6.1.2.1.10.48.1.4.1.2
hdsl2ShdslEndpointAlarmConfProfile This object configures the alarm threshold values to be used for this segment endpoint. The values are obtained from the alarm configuration profile referenced by this object. The value of this object is the index of …	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.2.1.10.48.1.4.1.3

This table contains current status and performance information
for segment endpoints in HDSL2/SHDSL lines.  As with other
tables in this MIB module indexed by ifIndex, entries in this
table MUST be maintained in a persistent manner.

hdsl2ShdslEndpointCurrEntry row .1.3.6.1.2.1.10.48.1.5.1

An entry in the hdsl2ShdslEndpointCurrTable. Each entry
contains status and performance information relating to a
single segment endpoint. It is indexed by the ifIndex of the
HDSL2/SHDSL line, the UnitId of the associ…

Indexes

IF-MIBifIndex hdsl2ShdslInvIndex hdsl2ShdslEndpointSide hdsl2ShdslEndpointWirePair

Column	Syntax	OID
hdsl2ShdslEndpointCurrAtn The current loop attenuation for this endpoint as reported in a Network or Customer Side Performance Status message.	dBInteger32 Constraints: range: -127-128	.1.3.6.1.2.1.10.48.1.5.1.1
hdsl2ShdslEndpointCurrSnrMgn The current SNR margin for this endpoint as reported in a Status Response/SNR message.	dBInteger32 Constraints: range: -127-128	.1.3.6.1.2.1.10.48.1.5.1.2
hdsl2ShdslEndpointCurrStatus Contains the current state of the endpoint. This is a bit-map of possible conditions. The various bit positions are as follows: noDefect There are no defects on the line. po…	Bits Enumerated Values: 0 noDefect 1 powerBackoff 2 deviceFault 3 dcContinuityFault 4 snrMarginAlarm 5 loopAttenuationAlarm 6 loswFailureAlarm 7 configInitFailure 8 protocolInitFailure 9 noNeighborPresent 10 loopbackActive	.1.3.6.1.2.1.10.48.1.5.1.3
hdsl2ShdslEndpointES Count of Errored Seconds (ES) on this endpoint since the xU was last restarted.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.48.1.5.1.4
hdsl2ShdslEndpointSES Count of Severely Errored Seconds (SES) on this endpoint since the xU was last restarted.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.48.1.5.1.5
hdsl2ShdslEndpointCRCanomalies Count of CRC anomalies on this endpoint since the xU was last restarted.	detected CRC AnomaliesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.48.1.5.1.6
hdsl2ShdslEndpointLOSWS Count of Loss of Sync Word (LOSW) Seconds on this endpoint since the xU was last restarted.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.48.1.5.1.7
hdsl2ShdslEndpointUAS Count of Unavailable Seconds (UAS) on this endpoint since the xU was last restarted.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.48.1.5.1.8
hdsl2ShdslEndpointCurr15MinTimeElapsed Total elapsed seconds in the current 15-minute interval.	secondsHdsl2ShdslPerfTimeElapsed Type Constraints: range: 0..86399	.1.3.6.1.2.1.10.48.1.5.1.9
hdsl2ShdslEndpointCurr15MinES Count of Errored Seconds (ES) in the current 15-minute interval.	secondsPerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.2.1.10.48.1.5.1.10
hdsl2ShdslEndpointCurr15MinSES Count of Severely Errored Seconds (SES) in the current 15-minute interval.	secondsPerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.2.1.10.48.1.5.1.11
hdsl2ShdslEndpointCurr15MinCRCanomalies Count of CRC anomalies in the current 15-minute interval.	detected CRC AnomaliesPerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.2.1.10.48.1.5.1.12
hdsl2ShdslEndpointCurr15MinLOSWS Count of Loss of Sync Word (LOSW) Seconds in the current 15-minute interval.	secondsPerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.2.1.10.48.1.5.1.13
hdsl2ShdslEndpointCurr15MinUAS Count of Unavailable Seconds (UAS) in the current 15-minute interval.	secondsPerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.2.1.10.48.1.5.1.14
hdsl2ShdslEndpointCurr1DayTimeElapsed Number of seconds that have elapsed since the beginning of the current 1-day interval.	secondsHdsl2ShdslPerfTimeElapsed Type Constraints: range: 0..86399	.1.3.6.1.2.1.10.48.1.5.1.15
hdsl2ShdslEndpointCurr1DayES Count of Errored Seconds (ES) during the current day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed.	secondsHdsl2ShdslPerfCurrDayCount	.1.3.6.1.2.1.10.48.1.5.1.16
hdsl2ShdslEndpointCurr1DaySES Count of Severely Errored Seconds (SES) during the current day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed.	secondsHdsl2ShdslPerfCurrDayCount	.1.3.6.1.2.1.10.48.1.5.1.17
hdsl2ShdslEndpointCurr1DayCRCanomalies Count of CRC anomalies during the current day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed.	detected CRC AnomaliesHdsl2ShdslPerfCurrDayCount	.1.3.6.1.2.1.10.48.1.5.1.18
hdsl2ShdslEndpointCurr1DayLOSWS Count of Loss of Sync Word (LOSW) Seconds during the current day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed.	secondsHdsl2ShdslPerfCurrDayCount	.1.3.6.1.2.1.10.48.1.5.1.19
hdsl2ShdslEndpointCurr1DayUAS Count of Unavailable Seconds (UAS) during the current day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed.	secondsHdsl2ShdslPerfCurrDayCount	.1.3.6.1.2.1.10.48.1.5.1.20
hdsl2ShdslEndpointCurrTipRingReversal This object indicates the state of the tip/ring for the wire pair.	Enumeration Enumerated Values: 1 normal 2 reversed	.1.3.6.1.2.1.10.48.1.5.1.21
hdsl2ShdslEndpointCurrActivationState This object indicates the activation or training state of the wire pair.	Enumeration Enumerated Values: 1 preActivation 2 activation 3 data	.1.3.6.1.2.1.10.48.1.5.1.22

This table provides one row for each HDSL2/SHDSL endpoint
performance data collection interval.  This table contains
live data from equipment.  As such, it is NOT persistent.

hdsl2Shdsl15MinIntervalEntry row .1.3.6.1.2.1.10.48.1.6.1

An entry in the hdsl2Shdsl15MinIntervalTable.

Indexes

IF-MIBifIndex hdsl2ShdslInvIndex hdsl2ShdslEndpointSide hdsl2ShdslEndpointWirePair hdsl2Shdsl15MinIntervalNumber

Column	Syntax	OID
hdsl2Shdsl15MinIntervalNumber Performance Data Interval number. Interval 1 is the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional.	Unsigned32 Constraints: range: 1-96	.1.3.6.1.2.1.10.48.1.6.1.1
hdsl2Shdsl15MinIntervalES Count of Errored Seconds (ES) during the interval.	secondsPerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.2.1.10.48.1.6.1.2
hdsl2Shdsl15MinIntervalSES Count of Severely Errored Seconds (SES) during the interval.	secondsPerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.2.1.10.48.1.6.1.3
hdsl2Shdsl15MinIntervalCRCanomalies Count of CRC anomalies during the interval.	detected CRC AnomaliesPerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.2.1.10.48.1.6.1.4
hdsl2Shdsl15MinIntervalLOSWS Count of Loss of Sync Word (LOSW) Seconds during the interval.	secondsPerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.2.1.10.48.1.6.1.5
hdsl2Shdsl15MinIntervalUAS Count of Unavailable Seconds (UAS) during the interval.	secondsPerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.2.1.10.48.1.6.1.6

This table provides one row for each HDSL2/SHDSL endpoint
performance data collection interval.  This table contains
live data from equipment.  As such, it is NOT persistent.

hdsl2Shdsl1DayIntervalEntry row .1.3.6.1.2.1.10.48.1.7.1

An entry in the hdsl2Shdsl1DayIntervalTable.

Indexes

IF-MIBifIndex hdsl2ShdslInvIndex hdsl2ShdslEndpointSide hdsl2ShdslEndpointWirePair hdsl2Shdsl1DayIntervalNumber

Column	Syntax	OID
hdsl2Shdsl1DayIntervalNumber History Data Interval number. Interval 1 is the most recent previous day; interval 30 is 30 days ago. Intervals 2..30 are optional.	Unsigned32 Constraints: range: 1-30	.1.3.6.1.2.1.10.48.1.7.1.1
hdsl2Shdsl1DayIntervalMoniSecs The amount of time in the 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monitoring dat…	secondsHdsl2ShdslPerfTimeElapsed Type Constraints: range: 0..86399	.1.3.6.1.2.1.10.48.1.7.1.2
hdsl2Shdsl1DayIntervalES Count of Errored Seconds (ES) during the 1-day interval as measured by hdsl2Shdsl1DayIntervalMoniSecs.	secondsHdsl2Shdsl1DayIntervalCount	.1.3.6.1.2.1.10.48.1.7.1.3
hdsl2Shdsl1DayIntervalSES Count of Severely Errored Seconds (SES) during the 1-day interval as measured by hdsl2Shdsl1DayIntervalMoniSecs.	secondsHdsl2Shdsl1DayIntervalCount	.1.3.6.1.2.1.10.48.1.7.1.4
hdsl2Shdsl1DayIntervalCRCanomalies Count of CRC anomalies during the 1-day interval as measured by hdsl2Shdsl1DayIntervalMoniSecs.	detected CRC AnomaliesHdsl2Shdsl1DayIntervalCount	.1.3.6.1.2.1.10.48.1.7.1.5
hdsl2Shdsl1DayIntervalLOSWS Count of Loss of Sync Word (LOSW) Seconds during the 1-day interval as measured by hdsl2Shdsl1DayIntervalMoniSecs.	secondsHdsl2Shdsl1DayIntervalCount	.1.3.6.1.2.1.10.48.1.7.1.6
hdsl2Shdsl1DayIntervalUAS Count of Unavailable Seconds (UAS) during the 1-day interval as measured by hdsl2Shdsl1DayIntervalMoniSecs.	secondsHdsl2Shdsl1DayIntervalCount	.1.3.6.1.2.1.10.48.1.7.1.7

This table supports maintenance operations (e.g., loopbacks)
to be performed on HDSL2/SHDSL segment endpoints.  This table
contains live data from equipment.  As such, it is NOT
persistent.

hdsl2ShdslEndpointMaintEntry row .1.3.6.1.2.1.10.48.1.8.1

An entry in the hdsl2ShdslEndpointMaintTable. Each entry
corresponds to a single segment endpoint and is indexed by the
ifIndex of the HDSL2/SHDSL line, the UnitId of the associated
unit, and the side of the unit.

Indexes

IF-MIBifIndex hdsl2ShdslInvIndex hdsl2ShdslEndpointSide

Column	Syntax	OID
hdsl2ShdslMaintLoopbackConfig This object controls configuration of loopbacks for the associated segment endpoint. The status of the loopback is obtained via the hdsl2ShdslEndpointCurrStatus object.	Enumerationr/w Enumerated Values: 1 noLoopback 2 normalLoopback 3 specialLoopback	.1.3.6.1.2.1.10.48.1.8.1.1
hdsl2ShdslMaintTipRingReversal This object indicates the state of the tip/ring pair at the associated segment endpoint.	Enumeration Enumerated Values: 1 normal 2 reversed	.1.3.6.1.2.1.10.48.1.8.1.2
hdsl2ShdslMaintPowerBackOff This object configures the receiver at the associated segment endpoint to operate in default or enhanced power backoff mode.	Enumerationr/w Enumerated Values: 1 default 2 enhanced	.1.3.6.1.2.1.10.48.1.8.1.3
hdsl2ShdslMaintSoftRestart This object enables the manager to trigger a soft restart of the modem at the associated segment endpoint. The manager may only set this object to the 'restart(2)' value, which initiates a restart. The agent will perf…	Enumerationr/w Enumerated Values: 1 ready 2 restart	.1.3.6.1.2.1.10.48.1.8.1.4

This table supports maintenance operations for units in a
HDSL2/SHDSL line.  Entries in this table MUST be maintained
in a persistent manner.

hdsl2ShdslUnitMaintEntry row .1.3.6.1.2.1.10.48.1.9.1

An entry in the hdsl2ShdslUnitMaintTable. Each entry
corresponds to a single unit and is indexed by the
ifIndex of the HDSL2/SHDSL line and the UnitId of the
associated unit.

Indexes

IF-MIBifIndex hdsl2ShdslInvIndex

Column	Syntax	OID
hdsl2ShdslMaintLoopbackTimeout This object configures the timeout value for loopbacks initiated at segments endpoints contained in the associated unit. A value of 0 disables the timeout.	minutesInteger32r/w Constraints: range: 0-4095	.1.3.6.1.2.1.10.48.1.9.1.1
hdsl2ShdslMaintUnitPowerSource This object indicates the DC power source being used by the associated unit.	Enumeration Enumerated Values: 1 local 2 span	.1.3.6.1.2.1.10.48.1.9.1.2

This table supports definitions of span configuration
profiles for SHDSL lines.  HDSL2 does not support these
configuration options.  This table MUST be maintained
in a persistent manner.

hdsl2ShdslSpanConfProfileEntry row .1.3.6.1.2.1.10.48.1.10.1

Each entry corresponds to a single span configuration
profile. Each profile contains a set of span configuration
parameters. The configuration parameters in a profile are
applied to those lines referencing that profil…

Indexes

hdsl2ShdslSpanConfProfileName

Column	Syntax	OID
hdsl2ShdslSpanConfProfileName This object is the unique index associated with this profile. Entries in this table are referenced via the object hdsl2ShdslSpanConfProfile in Hdsl2ShdslSpanConfEntry.	OctetString Constraints: range: 1-32	.1.3.6.1.2.1.10.48.1.10.1.1
hdsl2ShdslSpanConfWireInterface This object configures the two-wire or optional four-wire, six-wire, or eight-wire operation for SHDSL lines.	Enumerationr/w Enumerated Values: 1 twoWire 2 fourWire 3 sixWire 4 eightWire	.1.3.6.1.2.1.10.48.1.10.1.2
hdsl2ShdslSpanConfMinLineRate This object configures the minimum transmission rate for the associated SHDSL Line in bits-per-second (bps) and includes both payload (user data) and any applicable framing overhead. If the minimum line rate equals the …	bpsUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.2.1.10.48.1.10.1.3
hdsl2ShdslSpanConfMaxLineRate This object configures the maximum transmission rate for the associated SHDSL Line in bits-per-second (bps) and includes both payload (user data) and any applicable framing overhead. If the minimum line rate equals the …	bpsUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.2.1.10.48.1.10.1.4
hdsl2ShdslSpanConfPSD This object configures use of symmetric/asymmetric PSD (Power Spectral Density) Mask for the associated SHDSL Line. Support for symmetric PSD is mandatory for all supported data rates. Support for asymmetric PSD is opt…	Enumerationr/w Enumerated Values: 1 symmetric 2 asymmetric	.1.3.6.1.2.1.10.48.1.10.1.5
hdsl2ShdslSpanConfTransmissionMode This object specifies the regional setting for the SHDSL line.	Hdsl2ShdslTransmissionModeTyper/w Type Values: 0 region1 1 region2	.1.3.6.1.2.1.10.48.1.10.1.6
hdsl2ShdslSpanConfRemoteEnabled This object enables/disables support for remote management of the units in an SHDSL line from the STU-R via the EOC.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.2.1.10.48.1.10.1.7
hdsl2ShdslSpanConfPowerFeeding This object enables/disables support for optional power feeding in an SHDSL line.	Enumerationr/w Enumerated Values: 1 noPower 2 powerFeed 3 wettingCurrent	.1.3.6.1.2.1.10.48.1.10.1.8
hdsl2ShdslSpanConfCurrCondTargetMarginDown This object specifies the downstream current condition target SNR margin for an SHDSL line. The SNR margin is the difference between the desired SNR and the actual SNR. Target SNR margin is the desired SNR margin for …	dBInteger32r/w Constraints: range: -10-21	.1.3.6.1.2.1.10.48.1.10.1.9
hdsl2ShdslSpanConfWorstCaseTargetMarginDown This object specifies the downstream worst-case target SNR margin for an SHDSL line. The SNR margin is the difference between the desired SNR and the actual SNR. Target SNR margin is the desired SNR margin for a unit.	dBInteger32r/w Constraints: range: -10-21	.1.3.6.1.2.1.10.48.1.10.1.10
hdsl2ShdslSpanConfCurrCondTargetMarginUp This object specifies the upstream current-condition target SNR margin for an SHDSL line. The SNR margin is the difference between the desired SNR and the actual SNR. Target SNR margin is the desired SNR margin for a …	dBInteger32r/w Constraints: range: -10-21	.1.3.6.1.2.1.10.48.1.10.1.11
hdsl2ShdslSpanConfWorstCaseTargetMarginUp This object specifies the upstream worst-case target SNR margin for an SHDSL line. The SNR margin is the difference between the desired SNR and the actual SNR. Target SNR margin is the desired SNR margin for a unit.	dBInteger32r/w Constraints: range: -10-21	.1.3.6.1.2.1.10.48.1.10.1.12
hdsl2ShdslSpanConfUsedTargetMargins Indicates whether a target SNR margin is enabled or disabled. This is a bit-map of possible settings. The various bit positions are as follows: currCondDown - current-condition downstream target SNR …	Bitsr/w Enumerated Values: 0 currCondDown 1 worstCaseDown 2 currCondUp 3 worstCaseUp	.1.3.6.1.2.1.10.48.1.10.1.13
hdsl2ShdslSpanConfReferenceClock This object configures the clock reference for the STU-C in an SHDSL Line.	Hdsl2ShdslClockReferenceTyper/w Type Values: 1 localClk 2 networkClk 3 dataOrNetworkClk 4 dataClk	.1.3.6.1.2.1.10.48.1.10.1.14
hdsl2ShdslSpanConfLineProbeEnable This object enables/disables support for Line Probe of the units in an SHDSL line. When Line Probe is enabled, the system performs Line Probing to find the best possible rate. If Line Probe is disabled, the rate adapt…	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.2.1.10.48.1.10.1.15
hdsl2ShdslSpanConfProfileRowStatus This object controls creation/deletion of the associated entry in this table per the semantics of RowStatus. If an active entry is referenced in hdsl2ShdslSpanConfProfile, the entry MUST remain active until all referen…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.48.1.10.1.16

This table supports definitions of alarm configuration
profiles for HDSL2/SHDSL segment endpoints.  This table
MUST be maintained in a persistent manner.

hdsl2ShdslEndpointAlarmConfProfileEntry row .1.3.6.1.2.1.10.48.1.11.1

Each entry corresponds to a single alarm configuration profile.
Each profile contains a set of parameters for setting alarm
thresholds for various performance attributes monitored at
HDSL2/SHDSL segment endpoints. Prof…

Indexes

hdsl2ShdslEndpointAlarmConfProfileName

Column	Syntax	OID
hdsl2ShdslEndpointAlarmConfProfileName This object is the unique index associated with this profile.	OctetString Constraints: range: 1-32	.1.3.6.1.2.1.10.48.1.11.1.1
hdsl2ShdslEndpointThreshLoopAttenuation This object configures the loop attenuation alarm threshold. When the current value of hdsl2ShdslEndpointCurrAtn reaches or exceeds this threshold, an hdsl2ShdslLoopAttenCrossing MAY be generated.	dBInteger32r/w Constraints: range: -127-128	.1.3.6.1.2.1.10.48.1.11.1.2
hdsl2ShdslEndpointThreshSNRMargin This object configures the SNR margin alarm threshold. When the current value of hdsl2ShdslEndpointCurrSnrMgn reaches or drops below this threshold, a hdsl2ShdslSNRMarginCrossing MAY be generated.	dBInteger32r/w Constraints: range: -127-128	.1.3.6.1.2.1.10.48.1.11.1.3
hdsl2ShdslEndpointThreshES This object configures the threshold for the number of Errored Seconds (ES) within any given 15-minute performance data collection interval. If the value of Errored Seconds in a particular 15-minute collection interval…	secondsHdsl2ShdslPerfIntervalThresholdr/w Type Constraints: range: 0..900	.1.3.6.1.2.1.10.48.1.11.1.4
hdsl2ShdslEndpointThreshSES This object configures the threshold for the number of Severely Errored Seconds (SES) within any given 15-minute performance data collection interval. If the value of Severely Errored Seconds in a particular 15-minute …	secondsHdsl2ShdslPerfIntervalThresholdr/w Type Constraints: range: 0..900	.1.3.6.1.2.1.10.48.1.11.1.5
hdsl2ShdslEndpointThreshCRCanomalies This object configures the threshold for the number of CRC anomalies within any given 15-minute performance data collection interval. If the value of CRC anomalies in a particular 15-minute collection interval reaches/…	detected CRC AnomaliesSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.10.48.1.11.1.6
hdsl2ShdslEndpointThreshLOSWS This object configures the threshold for the number of Loss of Sync Word (LOSW) Seconds within any given 15-minute performance data collection interval. If the value of LOSW in a particular 15-minute collection interva…	secondsHdsl2ShdslPerfIntervalThresholdr/w Type Constraints: range: 0..900	.1.3.6.1.2.1.10.48.1.11.1.7
hdsl2ShdslEndpointThreshUAS This object configures the threshold for the number of Unavailable Seconds (UAS) within any given 15-minute performance data collection interval. If the value of UAS in a particular 15-minute collection interval reache…	secondsHdsl2ShdslPerfIntervalThresholdr/w Type Constraints: range: 0..900	.1.3.6.1.2.1.10.48.1.11.1.8
hdsl2ShdslEndpointAlarmConfProfileRowStatus This object controls creation/deletion of the associated entry in this table as per the semantics of RowStatus. If an active entry is referenced in either hdsl2ShdslSpanConfAlarmProfile or hdsl2ShdslEndpointAlarmConfPro…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.48.1.11.1.9