This MIB module defines a collection of objects for managing
HDSL2/SHDSL lines. An agent may reside at either end of the
line; however, the MIB module is designed to require no
management communication between the modems beyond that
inherent in the low-level EOC line protocol as defined in
ANSI T1E1.4/2000-006 (for HDSL2 lines) or in ITU G.991.2
(for SHDSL lines).
Copyright (C) The Internet Society (2005). This version of
this MIB module is part of RFC 4319; see the RFC itself for
full legal notices.
This notification indicates that the loop attenuation
threshold (as per the hdsl2ShdslEndpointThreshLoopAttenuation
value) has been reached/exceeded for the HDSL2/SHDSL segment
endpoint.
hdsl2ShdslpowerBackoff
.1.3.6.1.2.1.10.48.0.10
This notification indicates that the bit setting for
powerBackoff in the hdsl2ShdslEndpointCurrStatus object for
this endpoint has changed.
hdsl2ShdsldeviceFault
.1.3.6.1.2.1.10.48.0.11
This notification indicates that the bit setting for
deviceFault in the hdsl2ShdslEndpointCurrStatus object for
this endpoint has changed.
hdsl2ShdsldcContinuityFault
.1.3.6.1.2.1.10.48.0.12
This notification indicates that the bit setting for
dcContinuityFault in the hdsl2ShdslEndpointCurrStatus object
for this endpoint has changed.
hdsl2ShdslconfigInitFailure
.1.3.6.1.2.1.10.48.0.13
This notification indicates that the bit setting for
configInitFailure in the hdsl2ShdslEndpointCurrStatus object
for this endpoint has changed.
hdsl2ShdslprotocolInitFailure
.1.3.6.1.2.1.10.48.0.14
This notification indicates that the bit setting for
protocolInitFailure in the hdsl2ShdslEndpointCurrStatus
object for this endpoint has changed.
hdsl2ShdslnoNeighborPresent
.1.3.6.1.2.1.10.48.0.15
This notification indicates that the bit setting for
noNeighborPresent in the hdsl2ShdslEndpointCurrStatus object
for this endpoint has changed.
hdsl2ShdslLocalPowerLoss
.1.3.6.1.2.1.10.48.0.16
This notification indicates impending unit failure due to
loss of local power (last gasp).
hdsl2ShdslSNRMarginCrossing
.1.3.6.1.2.1.10.48.0.2
This notification indicates that the SNR margin threshold (as
per the hdsl2ShdslEndpointThreshSNRMargin value) has been
reached/exceeded for the HDSL2/SHDSL segment endpoint.
hdsl2ShdslPerfESThresh
.1.3.6.1.2.1.10.48.0.3
This notification indicates that the errored seconds
threshold (as per the hdsl2ShdslEndpointThreshES value)
has been reached/exceeded for the HDSL2/SHDSL segment
endpoint.
hdsl2ShdslPerfSESThresh
.1.3.6.1.2.1.10.48.0.4
This notification indicates that the severely errored seconds
threshold (as per the hdsl2ShdslEndpointThreshSES value) has
been reached/exceeded for the HDSL2/SHDSL segment endpoint.
hdsl2ShdslPerfCRCanomaliesThresh
.1.3.6.1.2.1.10.48.0.5
This notification indicates that the CRC anomalies threshold
(as per the hdsl2ShdslEndpointThreshCRCanomalies value) has
been reached/exceeded for the HDSL2/SHDSL segment endpoint.
hdsl2ShdslPerfLOSWSThresh
.1.3.6.1.2.1.10.48.0.6
This notification indicates that the LOSW Seconds threshold
(as per the hdsl2ShdslEndpointThreshLOSWS value) has been
reached/exceeded for the HDSL2/SHDSL segment endpoint.
hdsl2ShdslPerfUASThresh
.1.3.6.1.2.1.10.48.0.7
This notification indicates that the unavailable seconds
threshold (as per the hdsl2ShdslEndpointThreshUAS value) has
been reached/exceeded for the HDSL2/SHDSL segment endpoint.
hdsl2ShdslSpanInvalidNumRepeaters
.1.3.6.1.2.1.10.48.0.8
This notification indicates that a mismatch has been detected
between the number of repeater/regenerator units configured
for an HDSL2/SHDSL line via the hdsl2ShdslSpanConfNumRepeaters
object and the actual number of repeater/regenerator units
discovered via the EOC.
hdsl2ShdslLoopbackFailure
.1.3.6.1.2.1.10.48.0.9
This notification indicates that an endpoint maintenance
loopback command failed for an HDSL2/SHDSL segment.