H3C-RRPP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

h3cRrppDomainTable

table

.1.3.6.1.4.1.2011.10.2.45.2.1 · 1 row entry · 9 columns

Open in standard view

A table containing information about configurations
and status of a RRPP domain.

h3cRrppDomainEntry entry .1.3.6.1.4.1.2011.10.2.45.2.1.1

Detailed information of a specified RRPP domain.

Indexes

h3cRrppDomainID

Column Syntax OID

h3cRrppDomainID

An index uniquely identifies a RRPP domain,
which ranges from 1~128.
This value can't be modified after created.

Integer32

Constraints:
range: 1-128

.1.3.6.1.4.1.2011.10.2.45.2.1.1.1

h3cRrppDomainControlVlanID

Index of the control VLAN specified to a domain.
The value 65535 indicates the control VLAN has
not been configured.
The VLAN assigned to a RRPP Domain must not have
been created.
This value can't be modified after crea…

Integer32r/w

Constraints:
range: 2-4094
range: 65535-65535

.1.3.6.1.4.1.2011.10.2.45.2.1.1.2

h3cRrppDomainHelloTime

The value indicates the interval between two hello
packets sent by master-node, and its unit is second.
The value ranges from 1s~10s.

Integer32r/w

Constraints:
range: 1-10

.1.3.6.1.4.1.2011.10.2.45.2.1.1.3

h3cRrppDomainFailTime

The expiration value of the fail-period timer and its unit
is second. If not receiving hello packets before this
expires, the master-node considers the ring is broken.
The value of this node ranging from 3s~30s must no…

Integer32r/w

Constraints:
range: 3-30

.1.3.6.1.4.1.2011.10.2.45.2.1.1.4

h3cRrppDomainRowStatus

This object is responsible for managing the creation,
deletion and modification of rows, which support active
status and CreatAndGo, destroy operation.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.10.2.45.2.1.1.5

h3cRrppDomainInstanceListLow

Each octet contained in this value specifies an eight-instance
group, with the first octet specifying instances 0 through 7,
the second octet specifying instances 8 through 15, and so on.
Within each octet, the most sig…

OctetStringr/w

Constraints:
range: 256-256

.1.3.6.1.4.1.2011.10.2.45.2.1.1.6

h3cRrppDomainInstanceListHigh

Each octet contained in this value specifies an eight-instance
group, with the first octet specifying instances 2048 through
2055, the second octet specifying instances 2056 through 2063,
and so on. Within each octet, t…

OctetStringr/w

Constraints:
range: 256-256

.1.3.6.1.4.1.2011.10.2.45.2.1.1.7

h3cRrppDomainProtectVlanListLow

Each octet contained in this value specifies an eight-VLAN group,
with the first octet specifying VLANs 1 through 7, the second
octet specifying VLANs 8 through 15, and so on. Within each octet,
the most significant bit…

OctetStringr/w

Constraints:
range: 256-256

.1.3.6.1.4.1.2011.10.2.45.2.1.1.8

h3cRrppDomainProtectVlanListHigh

Each octet contained in this value specifies an eight-VLAN group,
with the first octet specifying VLANs 2048 through 2055, the
second octet specifying VLANs 2056 through 2063, and so on. Within
each octet, the most sign…

OctetStringr/w

Constraints:
range: 256-256

.1.3.6.1.4.1.2011.10.2.45.2.1.1.9

h3cRrppRingTable

table

.1.3.6.1.4.1.2011.10.2.45.2.2 · 1 row entry · 9 columns

Open in standard view

A table containing information about configurations
and status of a RRPP Ring.

h3cRrppRingEntry entry .1.3.6.1.4.1.2011.10.2.45.2.2.1

Detailed information of a specified RRPP Ring.

Indexes

h3cRrppDomainID h3cRrppRingID

Column Syntax OID

h3cRrppRingID

An index uniquely identifies a RRPP Ring,
which ranges from 1~128.
This value can't be modified after created.

Integer32

Constraints:
range: 1-128

.1.3.6.1.4.1.2011.10.2.45.2.2.1.1

h3cRrppRingEnableStatus

Indicating whether the RRPP is enabled on this Ring.
NOTE: If major-ring and sub-ring(s) of a domain
coexist on a switch, major-ring must be enabled
before sub-ring is enabled. And sub-ring must be
disabled before majo…

EnabledStatusr/w

Textual Convention: EnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.2011.10.2.45.2.2.1.2

h3cRrppRingActive

As both h3cRrppEnableStatus and h3cRrppRingEnableStatus
are enabled, the ring is activated. Whereas either of
the two items is disabled, the ring is inactive.

Enumeration

Enumerated Values:

1	active
2	inactive

.1.3.6.1.4.1.2011.10.2.45.2.2.1.3

h3cRrppRingState

The status (i.e. unknown, health or fault) of the Ethernet
ring.
This is valid only on the master-node.

Enumeration

Enumerated Values:

1	unknown
2	health
3	fault

.1.3.6.1.4.1.2011.10.2.45.2.2.1.4

h3cRrppRingNodeMode

There are four RRPP node modes for the switch on a RRPP
ring, such as master, transit, edge and assistant-edge.
Each RRPP ring has a single designated master-node. All
other nodes except edge-node and assistant-edge-no…

Enumerationr/w

Enumerated Values:

1	master
2	transit
3	edge
4	assistantEdge

.1.3.6.1.4.1.2011.10.2.45.2.2.1.5

h3cRrppRingPrimaryPort

If the switch is a master-node or transit-node, this value
is the primary port ifIndex; otherwise, if the switch is a
edge-node or assistant-edge-node, this value is the common
port ifIndex.
This value can't be modified…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.10.2.45.2.2.1.6

h3cRrppRingSecondaryPort

If the switch is a master-node or transit-node, this value
is the secondary port ifIndex; otherwise, if the switch is
an edge-node or assistant-edge-node, this value is the edge
port ifIndex.
This value can't be modifie…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.10.2.45.2.2.1.7

h3cRrppRingLevel

Level of a ring. This field should be set 1 on major-ring
and 2 on the sub-ring.
This value can't be modified after created.

Enumerationr/w

Enumerated Values:

1	majorRing
2	subRing

.1.3.6.1.4.1.2011.10.2.45.2.2.1.8

h3cRrppRingRowStatus

This object is responsible for managing the creation,
deletion and modification of rows, which support active
status and CreatAndGo, destroy operation.
To create a new row, h3cRrppRingNodeMode,
h3cRrppRingPrimaryPort, h…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.10.2.45.2.2.1.9

h3cRrppPortTable

table

.1.3.6.1.4.1.2011.10.2.45.2.3 · 1 row entry · 18 columns

Open in standard view

A table containing information about configurations and
status of a RRPP port.

h3cRrppPortEntry entry .1.3.6.1.4.1.2011.10.2.45.2.3.1

Detailed information of a specified RRPP port.

Indexes

h3cRrppDomainID h3cRrppRingID h3cRrppPortID

Column Syntax OID

h3cRrppPortID

ifIndex of the port.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.10.2.45.2.3.1.1

h3cRrppPortRole

The RRPP role of the port.
(i.e. primary, secondary, common or edge port).

Enumeration

Enumerated Values:

1	primary
2	secondary
3	common
4	edge

.1.3.6.1.4.1.2011.10.2.45.2.3.1.2

h3cRrppPortState

State of RRPP port, including unknown, unblocked, blocked
and down.

Enumeration

Enumerated Values:

1	unknown
2	unblocked
3	blocked
4	down

.1.3.6.1.4.1.2011.10.2.45.2.3.1.3

h3cRrppPortRXError

The statistics of illegal RRPP packets received from
this port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32