H3C-RRPP-MIB

        The RRPP (Rapid Ring Protection protocol) provides
fast protection switching to layer 2 switches
interconnected in an Ethernet ring topology.  When
a link in the ring breaks, the RRPP can recover the
data path quickly.  Its protection switching is
similar to what can be achieved with the Spanning
Tree Protocol (STP), but the converging time is less
than a second after link failure.
This MIB defines management information used on
products which support RRPP.
    
Source file
H3C-RRPP-MIB
Last revised
Identity
h3cRrpp
Base OID
1.3.6.1.4.1.2011.10.2.45
Imported Objects
HUAWEI-3COM-OID-MIB h3cCommon
SNMPv2-SMI Counter32 Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page)
SNMPv2-TC RowStatus TEXTUAL-CONVENTION (no object page)
Net-SNMP examples using the h3c MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'H3C-RRPP-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'H3C-RRPP-MIB::h3cRrpp'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-RRPP-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-RRPP-MIB::h3cRrpp'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (50)
.1.3.6.1.4.1.2011.10.2.45
.1.3.6.1.4.1.2011.10.2.45.1
.1.3.6.1.4.1.2011.10.2.45.1.1
OctetString
.1.3.6.1.4.1.2011.10.2.45.1.2
Enumeration
.1.3.6.1.4.1.2011.10.2.45.1.3
Enumeration
.1.3.6.1.4.1.2011.10.2.45.1.4
.1.3.6.1.4.1.2011.10.2.45.2
.1.3.6.1.4.1.2011.10.2.45.2.1
.1.3.6.1.4.1.2011.10.2.45.2.1.1
Integer32
.1.3.6.1.4.1.2011.10.2.45.2.1.1.1
Integer32
.1.3.6.1.4.1.2011.10.2.45.2.1.1.2
Integer32
.1.3.6.1.4.1.2011.10.2.45.2.1.1.3
Integer32
.1.3.6.1.4.1.2011.10.2.45.2.1.1.4
.1.3.6.1.4.1.2011.10.2.45.2.1.1.5
OctetString
.1.3.6.1.4.1.2011.10.2.45.2.1.1.6
OctetString
.1.3.6.1.4.1.2011.10.2.45.2.1.1.7
OctetString
.1.3.6.1.4.1.2011.10.2.45.2.1.1.8
OctetString
.1.3.6.1.4.1.2011.10.2.45.2.1.1.9
.1.3.6.1.4.1.2011.10.2.45.2.2
.1.3.6.1.4.1.2011.10.2.45.2.2.1
Integer32
.1.3.6.1.4.1.2011.10.2.45.2.2.1.1
.1.3.6.1.4.1.2011.10.2.45.2.2.1.2
Enumeration
.1.3.6.1.4.1.2011.10.2.45.2.2.1.3
Enumeration
.1.3.6.1.4.1.2011.10.2.45.2.2.1.4
Enumeration
.1.3.6.1.4.1.2011.10.2.45.2.2.1.5
.1.3.6.1.4.1.2011.10.2.45.2.2.1.6
.1.3.6.1.4.1.2011.10.2.45.2.2.1.7
Enumeration
.1.3.6.1.4.1.2011.10.2.45.2.2.1.8
.1.3.6.1.4.1.2011.10.2.45.2.2.1.9
.1.3.6.1.4.1.2011.10.2.45.2.3
.1.3.6.1.4.1.2011.10.2.45.2.3.1
.1.3.6.1.4.1.2011.10.2.45.2.3.1.1
.1.3.6.1.4.1.2011.10.2.45.2.3.1.10
.1.3.6.1.4.1.2011.10.2.45.2.3.1.11
.1.3.6.1.4.1.2011.10.2.45.2.3.1.12
.1.3.6.1.4.1.2011.10.2.45.2.3.1.13
.1.3.6.1.4.1.2011.10.2.45.2.3.1.14
.1.3.6.1.4.1.2011.10.2.45.2.3.1.15
.1.3.6.1.4.1.2011.10.2.45.2.3.1.16
.1.3.6.1.4.1.2011.10.2.45.2.3.1.17
.1.3.6.1.4.1.2011.10.2.45.2.3.1.18
Enumeration
.1.3.6.1.4.1.2011.10.2.45.2.3.1.2
Enumeration
.1.3.6.1.4.1.2011.10.2.45.2.3.1.3
.1.3.6.1.4.1.2011.10.2.45.2.3.1.4
.1.3.6.1.4.1.2011.10.2.45.2.3.1.5
.1.3.6.1.4.1.2011.10.2.45.2.3.1.6
.1.3.6.1.4.1.2011.10.2.45.2.3.1.7
.1.3.6.1.4.1.2011.10.2.45.2.3.1.8
.1.3.6.1.4.1.2011.10.2.45.2.3.1.9
.1.3.6.1.4.1.2011.10.2.45.3
Dependencies (4) 3 direct · 1 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. RFC1155-SMIrfc
  2. HUAWEI-3COM-OID-MIBh3c
  3. SNMPv2-SMIrfc
  4. SNMPv2-TCrfc
  5. H3C-RRPP-MIBh3cselected
Type Definitions (1)
Enumeration
enabled(1)
disabled(2)
Notifications / Traps (4)
NameOIDDescription
.1.3.6.1.4.1.2011.10.2.45.3.1
Trap message is generated by master-node on
the ring when the ring recovers from fault.
.1.3.6.1.4.1.2011.10.2.45.3.2
Trap message is generated by master-node on
the ring when the ring fails.
.1.3.6.1.4.1.2011.10.2.45.3.3
Trap message is generated by master-node when
it detects there are more than one master-node
on the ring.
.1.3.6.1.4.1.2011.10.2.45.3.4
Trap message is generated by edge-node or assistant-edge-node
when it detects major fault.