GEPARALLELUPS-MIB Table View

A list of input table entries.  The number of entries
is given by the value of upsInputNumLines.(*)

upsInputEntry row .1.3.6.1.4.1.818.1.1.10.3.3.1

An entry containing information applicable to a
particular input line.(*)

Indexes

No indexes recorded

Column	Syntax	OID
upsInputLineIndex The input line identifier.(*)	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.10.3.3.1.1
upsInputFrequency The present input frequency.(*)	0.1 HertzNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.10.3.3.1.2
upsInputVoltage The magnitude of the present input voltage.(*)	RMS VoltsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.10.3.3.1.3
upsInputCurrent The magnitude of the present input current.(*)	0.1 RMS AmpNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.10.3.3.1.4
upsInputTruePower The magnitude of the present input true power.(*)	WattsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.10.3.3.1.5
upsInputVoltageMin The lowest magnitude of the input voltage since last read out.	RMS VoltsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.10.3.3.1.6
upsInputVoltageMax The highest magnitude of the input voltage since last read out.	RMS VoltsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.10.3.3.1.7

A list of output table entries.  The number of
entries is given by the value of upsOutputNumLines.(*)

upsOutputEntry row .1.3.6.1.4.1.818.1.1.10.4.4.1

An entry containing information applicable to a
particular output line.(*)

Indexes

No indexes recorded

Column	Syntax	OID
upsOutputLineIndex The output line identifier.(*)	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.10.4.4.1.1
upsOutputVoltage The present output voltage.(*)	RMS VoltsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.10.4.4.1.2
upsOutputCurrent The present output current.(*)	0.1 RMS AmpNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.10.4.4.1.3
upsOutputPower The present output true power.(*)	WattsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.10.4.4.1.4
upsOutputPercentLoad The percentage of the UPS power capacity presently being used on this output line, i.e., the greater of the percent load of true power capacity and the percent load of VA.(*)	percentInteger32	.1.3.6.1.4.1.818.1.1.10.4.4.1.5
upsOutputPowerFactor The present output power factor. The returned value correspond to the cosf of the load. A positive value indicate an inductive load; a negative value indicate a capacitive load; value 1 indicate a resistive load. If…	0.01 cos phiInteger32	.1.3.6.1.4.1.818.1.1.10.4.4.1.6
upsOutputPeakCurrent The present output peak current.(*)	AmpsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.818.1.1.10.4.4.1.7
upsOutputShareCurrent In a parallel system ideally all the UPS are requested to contribute to the load with the same amount of current, i.e. with no current share. The current share occurs when an UPS exchanges some current with another UP…	AmpsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.818.1.1.10.4.4.1.8

A list of bypass table entries.  The number of
entries is given by the value of upsBypassNumLines.(*)

upsBypassEntry row .1.3.6.1.4.1.818.1.1.10.5.3.1

An entry containing information applicable to a
particular bypass input.(*)

Indexes

No indexes recorded

Column	Syntax	OID
upsBypassLineIndex The bypass line identifier.(*)	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.10.5.3.1.1
upsBypassVoltage The present bypass voltage.(*)	RMS VoltsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.10.5.3.1.2
upsBypassCurrent The present bypass current.(*)	0.1 RMS AmpNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.10.5.3.1.3
upsBypassPower The present true power conveyed by the bypass.(*)	WattsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.10.5.3.1.4

A list of alarm table entries.  The table contains
zero, one, or many rows at any moment, depending upon
the number of alarm conditions in effect.  The table
is initially empty at agent startup.  The agent
creates a row in the table each time a condition is
detected and deletes that row when that condition no
longer pertains.  The agent creates the first row with
upsAlarmId equal to 1, and increments the value of
upsAlarmId each time a new row is created, wrapping to
the first free value greater than or equal to 1 when
the maximum value of upsAlarmId would otherwise be
exceeded.  Consequently, after multiple operations,
the table may become sparse, e.g., containing entries
for rows 95, 100, 101, and 203 and the entries should
not be assumed to be in chronological order because
upsAlarmId might have wrapped.
          
Alarms are named by an AutonomousType (OBJECT
IDENTIFIER), upsAlarmDescr, to allow a single table to
reflect well known alarms plus alarms defined by a
particular implementation, i.e., as documented in the
private enterprise MIB definition for the device.  No
two rows will have the same value of upsAlarmDescr,
since alarms define conditions.  In order to meet this
requirement, care should be taken in the definition of
alarm conditions to insure that a system cannot enter
the same condition multiple times simultaneously.
          
The number of rows in the table at any given time is
reflected by the value of upsAlarmsPresent.(*)

upsAlarmEntry row .1.3.6.1.4.1.818.1.1.10.6.2.1

An entry containing information applicable to a
particular alarm.(*)

Indexes

No indexes recorded

Column	Syntax	OID
upsAlarmId A unique identifier for an alarm condition. This value must remain constant.(*)	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.10.6.2.1.1
upsAlarmDescr A reference to an alarm description object. The object referenced should not be accessible, but rather be used to provide a unique description of the alarm condition.(*)	SNMPv2-TCAutonomousType Description: Represents an independently extensible type identification value. It may, for example, indicate a particular sub-tree with further MIB definitions, or define a particular type of protocol or hardware.	.1.3.6.1.4.1.818.1.1.10.6.2.1.2
upsAlarmTime The value of sysUpTime when the alarm condition was detected. If the alarm condition was detected at the time of agent startup and presumably existed before agent startup, the value of upsAlarmTime shall equal 0.(*)	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.818.1.1.10.6.2.1.3

A list of receptacle table entries.  The number of
entries is given by the value of upsReceptacleNum.

upsReceptacleEntry row .1.3.6.1.4.1.818.1.1.10.8.7.1

An entry containing information applicable to a
particular receptacle.

Indexes

No indexes recorded

Column	Syntax	OID
upsReceptacleLineIndex The receptacle line identifier.	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.10.8.7.1.1
upsReceptacleOnOff The present state of the receptacle. Setting this object to 'on' will cause the receptacle to be turned on. Setting this object to 'off' will turn the receptacle off. If the receptacle is already in the desired state n…	Enumerationr/w	.1.3.6.1.4.1.818.1.1.10.8.7.1.2

A list of event table entries.  The number of entries is always
10, and the value of upsEventTableSize gives the number of valid
entries from the begging of the table.  Invalid entries return 0.
          
To prevent problems with simultaneous queries from several agents,
these values MUST be accessed using several PDUs in the
same SNMP message (<number> is (1..10)):
          
PDU-SET upsSetStartingTimeStamp <time> 
PDU-SET upsEventGetNext <number>
PDU-GET upsEventTableSize
PDU-GET upsEventCode,upsEventStatus,upsEventTime 1
PDU-GET upsEventCode,upsEventStatus,upsEventTime 2
..
PDU-GET upsEventCode,upsEventStatus,upsEventTime <number>
          
The table is read up to requested number of events and the
management software afterwards decides which entries are
valid, as indicated by the upsEventTableSize.

upsEventEntry row .1.3.6.1.4.1.818.1.1.10.10.6.1

An entry containing information applicable to a
particular event.

Indexes

No indexes recorded

Column	Syntax	OID
upsEventLineIndex The event line identifier.	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.10.10.6.1.1
upsEventCode The event code in numerical format.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.818.1.1.10.10.6.1.2
upsEventStatus The status of the UPS at the moment that the event was generated. The format is specified at the 'upsStatus' command. If the UPS is not able to deliver status information, then SNMPNOSUCHNAME is returned.	NonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.10.10.6.1.3
upsEventTime The timestamp of the moment the event was generated.	NonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.10.10.6.1.4

A list of parameter entries. The number of entries is always
16, and the value of upsParameterTableSize gives the number of valid
entries from the begging of the table. Invalid entries return 0.
          
To prevent problems with simultaneous queries from several agents,
these values MUST be accessed using several PDUs in the
same SNMP message (<number> is (1..16)):
          
Read sequence:
          
PDU-SET upsSetStartingAddress <addr>
PDU-SET upsParametersRead <number>
PDU-GET upsParameterTableSize
PDU-GET upsParameterValue 1
PDU-GET upsParameterValue 2
..
PDU-GET upsParameterValue <number>
          
The table is read up to requested number of events and the
management software afterwards decides which entries are
valid, as indicated by the upsParameterTableSize.
          
Write sequence:
          
PDU-SET upsSetStartingAddress <addr>
PDU-SET upsParameterValue 1
PDU-SET upsParameterValue 2
..
PDU-SET upsParameterValue <number>
PDU-SET upsParametersWrite <number>

upsParameterEntry row .1.3.6.1.4.1.818.1.1.10.10.11.1

An entry containing information applicable to a
particular parameter.

Indexes

No indexes recorded

Column	Syntax	OID
upsParameterLineIndex The parameter line identifier.	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.10.10.11.1.1
upsParameterValue The parameter value in numerical format.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.818.1.1.10.10.11.1.2

A list of input table entries.  The number of entries
is given by the value of upsInputNumLines.(*)

upsInputFirstEntry row .1.3.6.1.4.1.818.1.1.11.3.3.1

An entry containing information applicable to a
particular input line.(*)

Indexes

No indexes recorded

Column	Syntax	OID
upsInputLineIndexfirst The input line identifier.(*)	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.11.3.3.1.1
upsInputFrequencyfirst The present input frequency.(*)	0.1 HertzNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.11.3.3.1.2
upsInputVoltagefirst The magnitude of the present input voltage.(*)	RMS VoltsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.11.3.3.1.3
upsInputCurrentfirst The magnitude of the present input current.(*)	0.1 RMS AmpNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.11.3.3.1.4
upsInputTruePowerfirst The magnitude of the present input true power.(*)	WattsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.11.3.3.1.5
upsInputVoltageMinfirst The lowest magnitude of the input voltage since last read out.	RMS VoltsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.11.3.3.1.6
upsInputVoltageMaxfirst The highest magnitude of the input voltage since last read out.	RMS VoltsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.11.3.3.1.7

A list of output table entries.  The number of
entries is given by the value of upsOutputNumLines.(*)

upsOutputFirstEntry row .1.3.6.1.4.1.818.1.1.11.4.4.1

An entry containing information applicable to a
particular output line.(*)

Indexes

No indexes recorded

Column	Syntax	OID
upsOutputLineIndexfirst The output line identifier.(*)	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.11.4.4.1.1
upsOutputVoltagefirst The present output voltage.(*)	RMS VoltsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.11.4.4.1.2
upsOutputCurrentfirst The present output current.(*)	0.1 RMS AmpNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.11.4.4.1.3
upsOutputPowerfirst The present output true power.(*)	WattsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.11.4.4.1.4
upsOutputPercentLoadfirst The percentage of the UPS power capacity presently being used on this output line, i.e., the greater of the percent load of true power capacity and the percent load of VA.(*)	percentInteger32	.1.3.6.1.4.1.818.1.1.11.4.4.1.5
upsOutputPowerFactorfirst The present output power factor. The returned value correspond to the cosf of the load. A positive value indicate an inductive load; a negative value indicate a capacitive load; value 1 indicate a resistive load. If…	0.01 cos phiInteger32	.1.3.6.1.4.1.818.1.1.11.4.4.1.6
upsOutputPeakCurrentfirst The present output peak current.(*)	AmpsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.818.1.1.11.4.4.1.7
upsOutputShareCurrentfirst In a parallel system ideally all the UPS are requested to contribute to the load with the same amount of current, i.e. with no current share. The current share occurs when an UPS exchanges some current with another UP…	AmpsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.818.1.1.11.4.4.1.8

A list of bypass table entries.  The number of
entries is given by the value of upsBypassNumLines.(*)

upsBypassFirstEntry row .1.3.6.1.4.1.818.1.1.11.5.3.1

An entry containing information applicable to a
particular bypass input.(*)

Indexes

No indexes recorded

Column	Syntax	OID
upsBypassLineIndexfirst The bypass line identifier.(*)	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.11.5.3.1.1
upsBypassVoltagefirst The present bypass voltage.(*)	RMS VoltsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.11.5.3.1.2
upsBypassCurrentfirst The present bypass current.(*)	0.1 RMS AmpNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.11.5.3.1.3
upsBypassPowerfirst The present true power conveyed by the bypass.(*)	WattsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.11.5.3.1.4

A list of alarm table entries.  The table contains
zero, one, or many rows at any moment, depending upon
the number of alarm conditions in effect.  The table
is initially empty at agent startup.  The agent
creates a row in the table each time a condition is
detected and deletes that row when that condition no
longer pertains.  The agent creates the first row with
upsAlarmId equal to 1, and increments the value of
upsAlarmId each time a new row is created, wrapping to
the first free value greater than or equal to 1 when
the maximum value of upsAlarmId would otherwise be
exceeded.  Consequently, after multiple operations,
the table may become sparse, e.g., containing entries
for rows 95, 100, 101, and 203 and the entries should
not be assumed to be in chronological order because
upsAlarmId might have wrapped.
          
Alarms are named by an AutonomousType (OBJECT
IDENTIFIER), upsAlarmDescr, to allow a single table to
reflect well known alarms plus alarms defined by a
particular implementation, i.e., as documented in the
private enterprise MIB definition for the device.  No
two rows will have the same value of upsAlarmDescr,
since alarms define conditions.  In order to meet this
requirement, care should be taken in the definition of
alarm conditions to insure that a system cannot enter
the same condition multiple times simultaneously.
          
The number of rows in the table at any given time is
reflected by the value of upsAlarmsPresent.(*)

upsAlarmFirstEntry row .1.3.6.1.4.1.818.1.1.11.6.2.1

An entry containing information applicable to a
particular alarm.(*)

Indexes

No indexes recorded

Column	Syntax	OID
upsAlarmIdfirst A unique identifier for an alarm condition. This value must remain constant.(*)	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.11.6.2.1.1
upsAlarmDescrfirst A reference to an alarm description object. The object referenced should not be accessible, but rather be used to provide a unique description of the alarm condition.(*)	SNMPv2-TCAutonomousType Description: Represents an independently extensible type identification value. It may, for example, indicate a particular sub-tree with further MIB definitions, or define a particular type of protocol or hardware.	.1.3.6.1.4.1.818.1.1.11.6.2.1.2
upsAlarmTimefirst The value of sysUpTime when the alarm condition was detected. If the alarm condition was detected at the time of agent startup and presumably existed before agent startup, the value of upsAlarmTime shall equal 0.(*)	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.818.1.1.11.6.2.1.3

A list of receptacle table entries.  The number of
entries is given by the value of upsReceptacleNum.

upsReceptacleFirstEntry row .1.3.6.1.4.1.818.1.1.11.8.7.1

An entry containing information applicable to a
particular receptacle.

Indexes

No indexes recorded

Column	Syntax	OID
upsReceptacleLineIndexfirst The receptacle line identifier.	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.11.8.7.1.1
upsReceptacleOnOfffirst The present state of the receptacle. Setting this object to 'on' will cause the receptacle to be turned on. Setting this object to 'off' will turn the receptacle off. If the receptacle is already in the desired state n…	Enumerationr/w	.1.3.6.1.4.1.818.1.1.11.8.7.1.2

A list of event table entries.  The number of entries is always
10, and the value of upsEventTableSize gives the number of valid
entries from the begging of the table.  Invalid entries return 0.
          
To prevent problems with simultaneous queries from several agents,
these values MUST be accessed using several PDUs in the
same SNMP message (<number> is (1..10)):
          
PDU-SET upsSetStartingTimeStamp <time> 
PDU-SET upsEventGetNext <number>
PDU-GET upsEventTableSize
PDU-GET upsEventCode,upsEventStatus,upsEventTime 1
PDU-GET upsEventCode,upsEventStatus,upsEventTime 2
..
PDU-GET upsEventCode,upsEventStatus,upsEventTime <number>
          
The table is read up to requested number of events and the
management software afterwards decides which entries are
valid, as indicated by the upsEventTableSize.

upsEventFirstEntry row .1.3.6.1.4.1.818.1.1.11.10.6.1

An entry containing information applicable to a
particular event.

Indexes

No indexes recorded

Column	Syntax	OID
upsEventLineIndexfirst The event line identifier.	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.11.10.6.1.1
upsEventCodefirst The event code in numerical format.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.818.1.1.11.10.6.1.2
upsEventStatusfirst The status of the UPS at the moment that the event was generated. The format is specified at the 'upsStatus' command. If the UPS is not able to deliver status information, then SNMPNOSUCHNAME is returned.	NonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.11.10.6.1.3
upsEventTimefirst The timestamp of the moment the event was generated.	NonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.11.10.6.1.4

A list of parameter entries. The number of entries is always
16, and the value of upsParameterTableSize gives the number of valid
entries from the begging of the table. Invalid entries return 0.
          
To prevent problems with simultaneous queries from several agents,
these values MUST be accessed using several PDUs in the
same SNMP message (<number> is (1..16)):
          
Read sequence:
          
PDU-SET upsSetStartingAddress <addr>
PDU-SET upsParametersRead <number>
PDU-GET upsParameterTableSize
PDU-GET upsParameterValue 1
PDU-GET upsParameterValue 2
..
PDU-GET upsParameterValue <number>
          
The table is read up to requested number of events and the
management software afterwards decides which entries are
valid, as indicated by the upsParameterTableSize.
          
Write sequence:
          
PDU-SET upsSetStartingAddress <addr>
PDU-SET upsParameterValue 1
PDU-SET upsParameterValue 2
..
PDU-SET upsParameterValue <number>
PDU-SET upsParametersWrite <number>

upsParameterFirstEntry row .1.3.6.1.4.1.818.1.1.11.10.11.1

An entry containing information applicable to a
particular parameter.

Indexes

No indexes recorded

Column	Syntax	OID
upsParameterLineIndexfirst The parameter line identifier.	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.11.10.11.1.1
upsParameterValuefirst The parameter value in numerical format.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.818.1.1.11.10.11.1.2

A list of input table entries.  The number of entries
is given by the value of upsInputNumLines.(*)

upsInputSecondEntry row .1.3.6.1.4.1.818.1.1.12.3.3.1

An entry containing information applicable to a
particular input line.(*)

Indexes

No indexes recorded

Column	Syntax	OID
upsInputLineIndexsecond The input line identifier.(*)	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.12.3.3.1.1
upsInputFrequencysecond The present input frequency.(*)	0.1 HertzNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.12.3.3.1.2
upsInputVoltagesecond The magnitude of the present input voltage.(*)	RMS VoltsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.12.3.3.1.3
upsInputCurrentsecond The magnitude of the present input current.(*)	0.1 RMS AmpNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.12.3.3.1.4
upsInputTruePowersecond The magnitude of the present input true power.(*)	WattsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.12.3.3.1.5
upsInputVoltageMinsecond The lowest magnitude of the input voltage since last read out.	RMS VoltsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.12.3.3.1.6
upsInputVoltageMaxsecond The highest magnitude of the input voltage since last read out.	RMS VoltsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.12.3.3.1.7

A list of output table entries.  The number of
entries is given by the value of upsOutputNumLines.(*)

upsOutputSecondEntry row .1.3.6.1.4.1.818.1.1.12.4.4.1

An entry containing information applicable to a
particular output line.(*)

Indexes

No indexes recorded

Column	Syntax	OID
upsOutputLineIndexsecond The output line identifier.(*)	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.12.4.4.1.1
upsOutputVoltagesecond The present output voltage.(*)	RMS VoltsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.12.4.4.1.2
upsOutputCurrentsecond The present output current.(*)	0.1 RMS AmpNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.12.4.4.1.3
upsOutputPowersecond The present output true power.(*)	WattsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.12.4.4.1.4
upsOutputPercentLoadsecond The percentage of the UPS power capacity presently being used on this output line, i.e., the greater of the percent load of true power capacity and the percent load of VA.(*)	percentInteger32	.1.3.6.1.4.1.818.1.1.12.4.4.1.5
upsOutputPowerFactorsecond The present output power factor. The returned value correspond to the cosf of the load. A positive value indicate an inductive load; a negative value indicate a capacitive load; value 1 indicate a resistive load. If…	0.01 cos phiInteger32	.1.3.6.1.4.1.818.1.1.12.4.4.1.6
upsOutputPeakCurrentsecond The present output peak current.(*)	AmpsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.818.1.1.12.4.4.1.7
upsOutputShareCurrentsecond In a parallel system ideally all the UPS are requested to contribute to the load with the same amount of current, i.e. with no current share. The current share occurs when an UPS exchanges some current with another UP…	AmpsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.818.1.1.12.4.4.1.8

A list of bypass table entries.  The number of
entries is given by the value of upsBypassNumLines.(*)

upsBypassSecondEntry row .1.3.6.1.4.1.818.1.1.12.5.3.1

An entry containing information applicable to a
particular bypass input.(*)

Indexes

No indexes recorded

Column	Syntax	OID
upsBypassLineIndexsecond The bypass line identifier.(*)	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.12.5.3.1.1
upsBypassVoltagesecond The present bypass voltage.(*)	RMS VoltsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.12.5.3.1.2
upsBypassCurrentsecond The present bypass current.(*)	0.1 RMS AmpNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.12.5.3.1.3
upsBypassPowersecond The present true power conveyed by the bypass.(*)	WattsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.12.5.3.1.4

A list of alarm table entries.  The table contains
zero, one, or many rows at any moment, depending upon
the number of alarm conditions in effect.  The table
is initially empty at agent startup.  The agent
creates a row in the table each time a condition is
detected and deletes that row when that condition no
longer pertains.  The agent creates the first row with
upsAlarmId equal to 1, and increments the value of
upsAlarmId each time a new row is created, wrapping to
the first free value greater than or equal to 1 when
the maximum value of upsAlarmId would otherwise be
exceeded.  Consequently, after multiple operations,
the table may become sparse, e.g., containing entries
for rows 95, 100, 101, and 203 and the entries should
not be assumed to be in chronological order because
upsAlarmId might have wrapped.
          
Alarms are named by an AutonomousType (OBJECT
IDENTIFIER), upsAlarmDescr, to allow a single table to
reflect well known alarms plus alarms defined by a
particular implementation, i.e., as documented in the
private enterprise MIB definition for the device.  No
two rows will have the same value of upsAlarmDescr,
since alarms define conditions.  In order to meet this
requirement, care should be taken in the definition of
alarm conditions to insure that a system cannot enter
the same condition multiple times simultaneously.
          
The number of rows in the table at any given time is
reflected by the value of upsAlarmsPresent.(*)

upsAlarmSecondEntry row .1.3.6.1.4.1.818.1.1.12.6.2.1

An entry containing information applicable to a
particular alarm.(*)

Indexes

No indexes recorded

Column	Syntax	OID
upsAlarmIdsecond A unique identifier for an alarm condition. This value must remain constant.(*)	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.12.6.2.1.1
upsAlarmDescrsecond A reference to an alarm description object. The object referenced should not be accessible, but rather be used to provide a unique description of the alarm condition.(*)	SNMPv2-TCAutonomousType Description: Represents an independently extensible type identification value. It may, for example, indicate a particular sub-tree with further MIB definitions, or define a particular type of protocol or hardware.	.1.3.6.1.4.1.818.1.1.12.6.2.1.2
upsAlarmTimesecond The value of sysUpTime when the alarm condition was detected. If the alarm condition was detected at the time of agent startup and presumably existed before agent startup, the value of upsAlarmTime shall equal 0.(*)	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.818.1.1.12.6.2.1.3

A list of receptacle table entries.  The number of
entries is given by the value of upsReceptacleNum.

upsReceptacleSecondEntry row .1.3.6.1.4.1.818.1.1.12.8.7.1

An entry containing information applicable to a
particular receptacle.

Indexes

No indexes recorded

Column	Syntax	OID
upsReceptacleLineIndexsecond The receptacle line identifier.	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.12.8.7.1.1
upsReceptacleOnOffsecond The present state of the receptacle. Setting this object to 'on' will cause the receptacle to be turned on. Setting this object to 'off' will turn the receptacle off. If the receptacle is already in the desired state n…	Enumerationr/w	.1.3.6.1.4.1.818.1.1.12.8.7.1.2

A list of event table entries.  The number of entries is always
10, and the value of upsEventTableSize gives the number of valid
entries from the begging of the table.  Invalid entries return 0.
          
To prevent problems with simultaneous queries from several agents,
these values MUST be accessed using several PDUs in the
same SNMP message (<number> is (1..10)):
          
PDU-SET upsSetStartingTimeStamp <time> 
PDU-SET upsEventGetNext <number>
PDU-GET upsEventTableSize
PDU-GET upsEventCode,upsEventStatus,upsEventTime 1
PDU-GET upsEventCode,upsEventStatus,upsEventTime 2
..
PDU-GET upsEventCode,upsEventStatus,upsEventTime <number>
          
The table is read up to requested number of events and the
management software afterwards decides which entries are
valid, as indicated by the upsEventTableSize.

upsEventSecondEntry row .1.3.6.1.4.1.818.1.1.12.10.6.1

An entry containing information applicable to a
particular event.

Indexes

No indexes recorded

Column	Syntax	OID
upsEventLineIndexsecond The event line identifier.	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.12.10.6.1.1
upsEventCodesecond The event code in numerical format.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.818.1.1.12.10.6.1.2
upsEventStatussecond The status of the UPS at the moment that the event was generated. The format is specified at the 'upsStatus' command. If the UPS is not able to deliver status information, then SNMPNOSUCHNAME is returned.	NonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.12.10.6.1.3
upsEventTimesecond The timestamp of the moment the event was generated.	NonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.12.10.6.1.4

A list of parameter entries. The number of entries is always
16, and the value of upsParameterTableSize gives the number of valid
entries from the begging of the table. Invalid entries return 0.
          
To prevent problems with simultaneous queries from several agents,
these values MUST be accessed using several PDUs in the
same SNMP message (<number> is (1..16)):
          
Read sequence:
          
PDU-SET upsSetStartingAddress <addr>
PDU-SET upsParametersRead <number>
PDU-GET upsParameterTableSize
PDU-GET upsParameterValue 1
PDU-GET upsParameterValue 2
..
PDU-GET upsParameterValue <number>
          
The table is read up to requested number of events and the
management software afterwards decides which entries are
valid, as indicated by the upsParameterTableSize.
          
Write sequence:
          
PDU-SET upsSetStartingAddress <addr>
PDU-SET upsParameterValue 1
PDU-SET upsParameterValue 2
..
PDU-SET upsParameterValue <number>
PDU-SET upsParametersWrite <number>

upsParameterSecondEntry row .1.3.6.1.4.1.818.1.1.12.10.11.1

An entry containing information applicable to a
particular parameter.

Indexes

No indexes recorded

Column	Syntax	OID
upsParameterLineIndexsecond The parameter line identifier.	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.12.10.11.1.1
upsParameterValuesecond The parameter value in numerical format.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.818.1.1.12.10.11.1.2

A list of input table entries.  The number of entries
is given by the value of upsInputNumLines.(*)

upsInputThirdEntry row .1.3.6.1.4.1.818.1.1.13.3.3.1

An entry containing information applicable to a
particular input line.(*)

Indexes

No indexes recorded

Column	Syntax	OID
upsInputLineIndexthird The input line identifier.(*)	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.13.3.3.1.1
upsInputFrequencythird The present input frequency.(*)	0.1 HertzNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.13.3.3.1.2
upsInputVoltagethird The magnitude of the present input voltage.(*)	RMS VoltsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.13.3.3.1.3
upsInputCurrentthird The magnitude of the present input current.(*)	0.1 RMS AmpNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.13.3.3.1.4
upsInputTruePowerthird The magnitude of the present input true power.(*)	WattsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.13.3.3.1.5
upsInputVoltageMinthird The lowest magnitude of the input voltage since last read out.	RMS VoltsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.13.3.3.1.6
upsInputVoltageMaxthird The highest magnitude of the input voltage since last read out.	RMS VoltsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.13.3.3.1.7

A list of output table entries.  The number of
entries is given by the value of upsOutputNumLines.(*)

upsOutputThirdEntry row .1.3.6.1.4.1.818.1.1.13.4.4.1

An entry containing information applicable to a
particular output line.(*)

Indexes

No indexes recorded

Column	Syntax	OID
upsOutputLineIndexthird The output line identifier.(*)	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.13.4.4.1.1
upsOutputVoltagethird The present output voltage.(*)	RMS VoltsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.13.4.4.1.2
upsOutputCurrentthird The present output current.(*)	0.1 RMS AmpNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.13.4.4.1.3
upsOutputPowerthird The present output true power.(*)	WattsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.13.4.4.1.4
upsOutputPercentLoadthird The percentage of the UPS power capacity presently being used on this output line, i.e., the greater of the percent load of true power capacity and the percent load of VA.(*)	percentInteger32	.1.3.6.1.4.1.818.1.1.13.4.4.1.5
upsOutputPowerFactorthird The present output power factor. The returned value correspond to the cosf of the load. A positive value indicate an inductive load; a negative value indicate a capacitive load; value 1 indicate a resistive load. If…	0.01 cos phiInteger32	.1.3.6.1.4.1.818.1.1.13.4.4.1.6
upsOutputPeakCurrentthird The present output peak current.(*)	AmpsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.818.1.1.13.4.4.1.7
upsOutputShareCurrentthird In a parallel system ideally all the UPS are requested to contribute to the load with the same amount of current, i.e. with no current share. The current share occurs when an UPS exchanges some current with another UP…	AmpsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.818.1.1.13.4.4.1.8

A list of bypass table entries.  The number of
entries is given by the value of upsBypassNumLines.(*)

upsBypassThirdEntry row .1.3.6.1.4.1.818.1.1.13.5.3.1

An entry containing information applicable to a
particular bypass input.(*)

Indexes

No indexes recorded

Column	Syntax	OID
upsBypassLineIndexthird The bypass line identifier.(*)	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.13.5.3.1.1
upsBypassVoltagethird The present bypass voltage.(*)	RMS VoltsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.13.5.3.1.2
upsBypassCurrentthird The present bypass current.(*)	0.1 RMS AmpNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.13.5.3.1.3
upsBypassPowerthird The present true power conveyed by the bypass.(*)	WattsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.13.5.3.1.4

A list of alarm table entries.  The table contains
zero, one, or many rows at any moment, depending upon
the number of alarm conditions in effect.  The table
is initially empty at agent startup.  The agent
creates a row in the table each time a condition is
detected and deletes that row when that condition no
longer pertains.  The agent creates the first row with
upsAlarmId equal to 1, and increments the value of
upsAlarmId each time a new row is created, wrapping to
the first free value greater than or equal to 1 when
the maximum value of upsAlarmId would otherwise be
exceeded.  Consequently, after multiple operations,
the table may become sparse, e.g., containing entries
for rows 95, 100, 101, and 203 and the entries should
not be assumed to be in chronological order because
upsAlarmId might have wrapped.
          
Alarms are named by an AutonomousType (OBJECT
IDENTIFIER), upsAlarmDescr, to allow a single table to
reflect well known alarms plus alarms defined by a
particular implementation, i.e., as documented in the
private enterprise MIB definition for the device.  No
two rows will have the same value of upsAlarmDescr,
since alarms define conditions.  In order to meet this
requirement, care should be taken in the definition of
alarm conditions to insure that a system cannot enter
the same condition multiple times simultaneously.
          
The number of rows in the table at any given time is
reflected by the value of upsAlarmsPresent.(*)

upsAlarmThirdEntry row .1.3.6.1.4.1.818.1.1.13.6.2.1

An entry containing information applicable to a
particular alarm.(*)

Indexes

No indexes recorded

Column	Syntax	OID
upsAlarmIdthird A unique identifier for an alarm condition. This value must remain constant.(*)	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.13.6.2.1.1
upsAlarmDescrthird A reference to an alarm description object. The object referenced should not be accessible, but rather be used to provide a unique description of the alarm condition.(*)	SNMPv2-TCAutonomousType Description: Represents an independently extensible type identification value. It may, for example, indicate a particular sub-tree with further MIB definitions, or define a particular type of protocol or hardware.	.1.3.6.1.4.1.818.1.1.13.6.2.1.2
upsAlarmTimethird The value of sysUpTime when the alarm condition was detected. If the alarm condition was detected at the time of agent startup and presumably existed before agent startup, the value of upsAlarmTime shall equal 0.(*)	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.818.1.1.13.6.2.1.3

A list of receptacle table entries.  The number of
entries is given by the value of upsReceptacleNum.

upsReceptacleThirdEntry row .1.3.6.1.4.1.818.1.1.13.8.7.1

An entry containing information applicable to a
particular receptacle.

Indexes

No indexes recorded

Column	Syntax	OID
upsReceptacleLineIndexthird The receptacle line identifier.	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.13.8.7.1.1
upsReceptacleOnOffthird The present state of the receptacle. Setting this object to 'on' will cause the receptacle to be turned on. Setting this object to 'off' will turn the receptacle off. If the receptacle is already in the desired state n…	Enumerationr/w	.1.3.6.1.4.1.818.1.1.13.8.7.1.2

A list of event table entries.  The number of entries is always
10, and the value of upsEventTableSize gives the number of valid
entries from the begging of the table.  Invalid entries return 0.
          
To prevent problems with simultaneous queries from several agents,
these values MUST be accessed using several PDUs in the
same SNMP message (<number> is (1..10)):
          
PDU-SET upsSetStartingTimeStamp <time> 
PDU-SET upsEventGetNext <number>
PDU-GET upsEventTableSize
PDU-GET upsEventCode,upsEventStatus,upsEventTime 1
PDU-GET upsEventCode,upsEventStatus,upsEventTime 2
..
PDU-GET upsEventCode,upsEventStatus,upsEventTime <number>
          
The table is read up to requested number of events and the
management software afterwards decides which entries are
valid, as indicated by the upsEventTableSize.

upsEventThirdEntry row .1.3.6.1.4.1.818.1.1.13.10.6.1

An entry containing information applicable to a
particular event.

Indexes

No indexes recorded

Column	Syntax	OID
upsEventLineIndexthird The event line identifier.	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.13.10.6.1.1
upsEventCodethird The event code in numerical format.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.818.1.1.13.10.6.1.2
upsEventStatusthird The status of the UPS at the moment that the event was generated. The format is specified at the 'upsStatus' command. If the UPS is not able to deliver status information, then SNMPNOSUCHNAME is returned.	NonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.13.10.6.1.3
upsEventTimethird The timestamp of the moment the event was generated.	NonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.13.10.6.1.4

A list of parameter entries. The number of entries is always
16, and the value of upsParameterTableSize gives the number of valid
entries from the begging of the table. Invalid entries return 0.
          
To prevent problems with simultaneous queries from several agents,
these values MUST be accessed using several PDUs in the
same SNMP message (<number> is (1..16)):
          
Read sequence:
          
PDU-SET upsSetStartingAddress <addr>
PDU-SET upsParametersRead <number>
PDU-GET upsParameterTableSize
PDU-GET upsParameterValue 1
PDU-GET upsParameterValue 2
..
PDU-GET upsParameterValue <number>
          
The table is read up to requested number of events and the
management software afterwards decides which entries are
valid, as indicated by the upsParameterTableSize.
          
Write sequence:
          
PDU-SET upsSetStartingAddress <addr>
PDU-SET upsParameterValue 1
PDU-SET upsParameterValue 2
..
PDU-SET upsParameterValue <number>
PDU-SET upsParametersWrite <number>

upsParameterThirdEntry row .1.3.6.1.4.1.818.1.1.13.10.11.1

An entry containing information applicable to a
particular parameter.

Indexes

No indexes recorded

Column	Syntax	OID
upsParameterLineIndexthird The parameter line identifier.	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.13.10.11.1.1
upsParameterValuethird The parameter value in numerical format.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.818.1.1.13.10.11.1.2

A list of input table entries.  The number of entries
is given by the value of upsInputNumLines.(*)

upsInputFourthEntry row .1.3.6.1.4.1.818.1.1.14.3.3.1

An entry containing information applicable to a
particular input line.(*)

Indexes

No indexes recorded

Column	Syntax	OID
upsInputLineIndexfourth The input line identifier.(*)	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.14.3.3.1.1
upsInputFrequencyfourth The present input frequency.(*)	0.1 HertzNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.14.3.3.1.2
upsInputVoltagefourth The magnitude of the present input voltage.(*)	RMS VoltsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.14.3.3.1.3
upsInputCurrentfourth The magnitude of the present input current.(*)	0.1 RMS AmpNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.14.3.3.1.4
upsInputTruePowerfourth The magnitude of the present input true power.(*)	WattsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.14.3.3.1.5
upsInputVoltageMinfourth The lowest magnitude of the input voltage since last read out.	RMS VoltsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.14.3.3.1.6
upsInputVoltageMaxfourth The highest magnitude of the input voltage since last read out.	RMS VoltsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.14.3.3.1.7

A list of output table entries.  The number of
entries is given by the value of upsOutputNumLines.(*)

upsOutputFourthEntry row .1.3.6.1.4.1.818.1.1.14.4.4.1

An entry containing information applicable to a
particular output line.(*)

Indexes

No indexes recorded

Column	Syntax	OID
upsOutputLineIndexfourth The output line identifier.(*)	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.14.4.4.1.1
upsOutputVoltagefourth The present output voltage.(*)	RMS VoltsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.14.4.4.1.2
upsOutputCurrentfourth The present output current.(*)	0.1 RMS AmpNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.14.4.4.1.3
upsOutputPowerfourth The present output true power.(*)	WattsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.14.4.4.1.4
upsOutputPercentLoadfourth The percentage of the UPS power capacity presently being used on this output line, i.e., the greater of the percent load of true power capacity and the percent load of VA.(*)	percentInteger32	.1.3.6.1.4.1.818.1.1.14.4.4.1.5
upsOutputPowerFactorfourth The present output power factor. The returned value correspond to the cosf of the load. A positive value indicate an inductive load; a negative value indicate a capacitive load; value 1 indicate a resistive load. If…	0.01 cos phiInteger32	.1.3.6.1.4.1.818.1.1.14.4.4.1.6
upsOutputPeakCurrentfourth The present output peak current.(*)	AmpsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.818.1.1.14.4.4.1.7
upsOutputShareCurrentfourth In a parallel system ideally all the UPS are requested to contribute to the load with the same amount of current, i.e. with no current share. The current share occurs when an UPS exchanges some current with another UP…	AmpsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.818.1.1.14.4.4.1.8

A list of bypass table entries.  The number of
entries is given by the value of upsBypassNumLines.(*)

upsBypassFourthEntry row .1.3.6.1.4.1.818.1.1.14.5.3.1

An entry containing information applicable to a
particular bypass input.(*)

Indexes

No indexes recorded

Column	Syntax	OID
upsBypassLineIndexfourth The bypass line identifier.(*)	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.14.5.3.1.1
upsBypassVoltagefourth The present bypass voltage.(*)	RMS VoltsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.14.5.3.1.2
upsBypassCurrentfourth The present bypass current.(*)	0.1 RMS AmpNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.14.5.3.1.3
upsBypassPowerfourth The present true power conveyed by the bypass.(*)	WattsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.14.5.3.1.4

A list of alarm table entries.  The table contains
zero, one, or many rows at any moment, depending upon
the number of alarm conditions in effect.  The table
is initially empty at agent startup.  The agent
creates a row in the table each time a condition is
detected and deletes that row when that condition no
longer pertains.  The agent creates the first row with
upsAlarmId equal to 1, and increments the value of
upsAlarmId each time a new row is created, wrapping to
the first free value greater than or equal to 1 when
the maximum value of upsAlarmId would otherwise be
exceeded.  Consequently, after multiple operations,
the table may become sparse, e.g., containing entries
for rows 95, 100, 101, and 203 and the entries should
not be assumed to be in chronological order because
upsAlarmId might have wrapped.
          
Alarms are named by an AutonomousType (OBJECT
IDENTIFIER), upsAlarmDescr, to allow a single table to
reflect well known alarms plus alarms defined by a
particular implementation, i.e., as documented in the
private enterprise MIB definition for the device.  No
two rows will have the same value of upsAlarmDescr,
since alarms define conditions.  In order to meet this
requirement, care should be taken in the definition of
alarm conditions to insure that a system cannot enter
the same condition multiple times simultaneously.
          
The number of rows in the table at any given time is
reflected by the value of upsAlarmsPresent.(*)

upsAlarmFourthEntry row .1.3.6.1.4.1.818.1.1.14.6.2.1

An entry containing information applicable to a
particular alarm.(*)

Indexes

No indexes recorded

Column	Syntax	OID
upsAlarmIdfourth A unique identifier for an alarm condition. This value must remain constant.(*)	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.14.6.2.1.1
upsAlarmDescrfourth A reference to an alarm description object. The object referenced should not be accessible, but rather be used to provide a unique description of the alarm condition.(*)	SNMPv2-TCAutonomousType Description: Represents an independently extensible type identification value. It may, for example, indicate a particular sub-tree with further MIB definitions, or define a particular type of protocol or hardware.	.1.3.6.1.4.1.818.1.1.14.6.2.1.2
upsAlarmTimefourth The value of sysUpTime when the alarm condition was detected. If the alarm condition was detected at the time of agent startup and presumably existed before agent startup, the value of upsAlarmTime shall equal 0.(*)	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.818.1.1.14.6.2.1.3

A list of receptacle table entries.  The number of
entries is given by the value of upsReceptacleNum.

upsReceptacleFourthEntry row .1.3.6.1.4.1.818.1.1.14.8.7.1

An entry containing information applicable to a
particular receptacle.

Indexes

No indexes recorded

Column	Syntax	OID
upsReceptacleLineIndexfourth The receptacle line identifier.	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.14.8.7.1.1
upsReceptacleOnOfffourth The present state of the receptacle. Setting this object to 'on' will cause the receptacle to be turned on. Setting this object to 'off' will turn the receptacle off. If the receptacle is already in the desired state n…	Enumerationr/w	.1.3.6.1.4.1.818.1.1.14.8.7.1.2

A list of event table entries.  The number of entries is always
10, and the value of upsEventTableSize gives the number of valid
entries from the begging of the table.  Invalid entries return 0.
          
To prevent problems with simultaneous queries from several agents,
these values MUST be accessed using several PDUs in the
same SNMP message (<number> is (1..10)):
          
PDU-SET upsSetStartingTimeStamp <time> 
PDU-SET upsEventGetNext <number>
PDU-GET upsEventTableSize
PDU-GET upsEventCode,upsEventStatus,upsEventTime 1
PDU-GET upsEventCode,upsEventStatus,upsEventTime 2
..
PDU-GET upsEventCode,upsEventStatus,upsEventTime <number>
          
The table is read up to requested number of events and the
management software afterwards decides which entries are
valid, as indicated by the upsEventTableSize.

upsEventFourthEntry row .1.3.6.1.4.1.818.1.1.14.10.6.1

An entry containing information applicable to a
particular event.

Indexes

No indexes recorded

Column	Syntax	OID
upsEventLineIndexfourth The event line identifier.	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.14.10.6.1.1
upsEventCodefourth The event code in numerical format.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.818.1.1.14.10.6.1.2
upsEventStatusfourth The status of the UPS at the moment that the event was generated. The format is specified at the 'upsStatus' command. If the UPS is not able to deliver status information, then SNMPNOSUCHNAME is returned.	NonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.14.10.6.1.3
upsEventTimefourth The timestamp of the moment the event was generated.	NonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.14.10.6.1.4

A list of parameter entries. The number of entries is always
16, and the value of upsParameterTableSize gives the number of valid
entries from the begging of the table. Invalid entries return 0.
          
To prevent problems with simultaneous queries from several agents,
these values MUST be accessed using several PDUs in the
same SNMP message (<number> is (1..16)):
          
Read sequence:
          
PDU-SET upsSetStartingAddress <addr>
PDU-SET upsParametersRead <number>
PDU-GET upsParameterTableSize
PDU-GET upsParameterValue 1
PDU-GET upsParameterValue 2
..
PDU-GET upsParameterValue <number>
          
The table is read up to requested number of events and the
management software afterwards decides which entries are
valid, as indicated by the upsParameterTableSize.
          
Write sequence:
          
PDU-SET upsSetStartingAddress <addr>
PDU-SET upsParameterValue 1
PDU-SET upsParameterValue 2
..
PDU-SET upsParameterValue <number>
PDU-SET upsParametersWrite <number>

upsParameterFourthEntry row .1.3.6.1.4.1.818.1.1.14.10.11.1

An entry containing information applicable to a
particular parameter.

Indexes

No indexes recorded

Column	Syntax	OID
upsParameterLineIndexfourth The parameter line identifier.	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.14.10.11.1.1
upsParameterValuefourth The parameter value in numerical format.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.818.1.1.14.10.11.1.2

A list of input table entries.  The number of entries
is given by the value of upsInputNumLines.(*)

upsInputFifthEntry row .1.3.6.1.4.1.818.1.1.15.3.3.1

An entry containing information applicable to a
particular input line.(*)

Indexes

No indexes recorded

Column	Syntax	OID
upsInputLineIndexfifth The input line identifier.(*)	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.15.3.3.1.1
upsInputFrequencyfifth The present input frequency.(*)	0.1 HertzNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.15.3.3.1.2
upsInputVoltagefifth The magnitude of the present input voltage.(*)	RMS VoltsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.15.3.3.1.3
upsInputCurrentfifth The magnitude of the present input current.(*)	0.1 RMS AmpNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.15.3.3.1.4
upsInputTruePowerfifth The magnitude of the present input true power.(*)	WattsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.15.3.3.1.5
upsInputVoltageMinfifth The lowest magnitude of the input voltage since last read out.	RMS VoltsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.15.3.3.1.6
upsInputVoltageMaxfifth The highest magnitude of the input voltage since last read out.	RMS VoltsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.15.3.3.1.7

A list of output table entries.  The number of
entries is given by the value of upsOutputNumLines.(*)

upsOutputFifthEntry row .1.3.6.1.4.1.818.1.1.15.4.4.1

An entry containing information applicable to a
particular output line.(*)

Indexes

No indexes recorded

Column	Syntax	OID
upsOutputLineIndexfifth The output line identifier.(*)	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.15.4.4.1.1
upsOutputVoltagefifth The present output voltage.(*)	RMS VoltsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.15.4.4.1.2
upsOutputCurrentfifth The present output current.(*)	0.1 RMS AmpNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.15.4.4.1.3
upsOutputPowerfifth The present output true power.(*)	WattsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.15.4.4.1.4
upsOutputPercentLoadfifth The percentage of the UPS power capacity presently being used on this output line, i.e., the greater of the percent load of true power capacity and the percent load of VA.(*)	percentInteger32	.1.3.6.1.4.1.818.1.1.15.4.4.1.5
upsOutputPowerFactorfifth The present output power factor. The returned value correspond to the cosf of the load. A positive value indicate an inductive load; a negative value indicate a capacitive load; value 1 indicate a resistive load. If…	0.01 cos phiInteger32	.1.3.6.1.4.1.818.1.1.15.4.4.1.6
upsOutputPeakCurrentfifth The present output peak current.(*)	AmpsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.818.1.1.15.4.4.1.7
upsOutputShareCurrentfifth In a parallel system ideally all the UPS are requested to contribute to the load with the same amount of current, i.e. with no current share. The current share occurs when an UPS exchanges some current with another UP…	AmpsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.818.1.1.15.4.4.1.8

A list of bypass table entries.  The number of
entries is given by the value of upsBypassNumLines.(*)

upsBypassFifthEntry row .1.3.6.1.4.1.818.1.1.15.5.3.1

An entry containing information applicable to a
particular bypass input.(*)

Indexes

No indexes recorded

Column	Syntax	OID
upsBypassLineIndexfifth The bypass line identifier.(*)	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.15.5.3.1.1
upsBypassVoltagefifth The present bypass voltage.(*)	RMS VoltsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.15.5.3.1.2
upsBypassCurrentfifth The present bypass current.(*)	0.1 RMS AmpNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.15.5.3.1.3
upsBypassPowerfifth The present true power conveyed by the bypass.(*)	WattsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.15.5.3.1.4

A list of alarm table entries.  The table contains
zero, one, or many rows at any moment, depending upon
the number of alarm conditions in effect.  The table
is initially empty at agent startup.  The agent
creates a row in the table each time a condition is
detected and deletes that row when that condition no
longer pertains.  The agent creates the first row with
upsAlarmId equal to 1, and increments the value of
upsAlarmId each time a new row is created, wrapping to
the first free value greater than or equal to 1 when
the maximum value of upsAlarmId would otherwise be
exceeded.  Consequently, after multiple operations,
the table may become sparse, e.g., containing entries
for rows 95, 100, 101, and 203 and the entries should
not be assumed to be in chronological order because
upsAlarmId might have wrapped.
          
Alarms are named by an AutonomousType (OBJECT
IDENTIFIER), upsAlarmDescr, to allow a single table to
reflect well known alarms plus alarms defined by a
particular implementation, i.e., as documented in the
private enterprise MIB definition for the device.  No
two rows will have the same value of upsAlarmDescr,
since alarms define conditions.  In order to meet this
requirement, care should be taken in the definition of
alarm conditions to insure that a system cannot enter
the same condition multiple times simultaneously.
          
The number of rows in the table at any given time is
reflected by the value of upsAlarmsPresent.(*)

upsAlarmFifthEntry row .1.3.6.1.4.1.818.1.1.15.6.2.1

An entry containing information applicable to a
particular alarm.(*)

Indexes

No indexes recorded

Column	Syntax	OID
upsAlarmIdfifth A unique identifier for an alarm condition. This value must remain constant.(*)	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.15.6.2.1.1
upsAlarmDescrfifth A reference to an alarm description object. The object referenced should not be accessible, but rather be used to provide a unique description of the alarm condition.(*)	SNMPv2-TCAutonomousType Description: Represents an independently extensible type identification value. It may, for example, indicate a particular sub-tree with further MIB definitions, or define a particular type of protocol or hardware.	.1.3.6.1.4.1.818.1.1.15.6.2.1.2
upsAlarmTimefifth The value of sysUpTime when the alarm condition was detected. If the alarm condition was detected at the time of agent startup and presumably existed before agent startup, the value of upsAlarmTime shall equal 0.(*)	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.818.1.1.15.6.2.1.3

A list of receptacle table entries.  The number of
entries is given by the value of upsReceptacleNum.

upsReceptacleFifthEntry row .1.3.6.1.4.1.818.1.1.15.8.7.1

An entry containing information applicable to a
particular receptacle.

Indexes

No indexes recorded

Column	Syntax	OID
upsReceptacleLineIndexfifth The receptacle line identifier.	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.15.8.7.1.1
upsReceptacleOnOfffifth The present state of the receptacle. Setting this object to 'on' will cause the receptacle to be turned on. Setting this object to 'off' will turn the receptacle off. If the receptacle is already in the desired state n…	Enumerationr/w	.1.3.6.1.4.1.818.1.1.15.8.7.1.2

A list of event table entries.  The number of entries is always
10, and the value of upsEventTableSize gives the number of valid
entries from the begging of the table.  Invalid entries return 0.
          
To prevent problems with simultaneous queries from several agents,
these values MUST be accessed using several PDUs in the
same SNMP message (<number> is (1..10)):
          
PDU-SET upsSetStartingTimeStamp <time> 
PDU-SET upsEventGetNext <number>
PDU-GET upsEventTableSize
PDU-GET upsEventCode,upsEventStatus,upsEventTime 1
PDU-GET upsEventCode,upsEventStatus,upsEventTime 2
..
PDU-GET upsEventCode,upsEventStatus,upsEventTime <number>
          
The table is read up to requested number of events and the
management software afterwards decides which entries are
valid, as indicated by the upsEventTableSize.

upsEventFifthEntry row .1.3.6.1.4.1.818.1.1.15.10.6.1

An entry containing information applicable to a
particular event.

Indexes

No indexes recorded

Column	Syntax	OID
upsEventLineIndexfifth The event line identifier.	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.15.10.6.1.1
upsEventCodefifth The event code in numerical format.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.818.1.1.15.10.6.1.2
upsEventStatusfifth The status of the UPS at the moment that the event was generated. The format is specified at the 'upsStatus' command. If the UPS is not able to deliver status information, then SNMPNOSUCHNAME is returned.	NonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.15.10.6.1.3
upsEventTimefifth The timestamp of the moment the event was generated.	NonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.15.10.6.1.4

A list of parameter entries. The number of entries is always
16, and the value of upsParameterTableSize gives the number of valid
entries from the begging of the table. Invalid entries return 0.
          
To prevent problems with simultaneous queries from several agents,
these values MUST be accessed using several PDUs in the
same SNMP message (<number> is (1..16)):
          
Read sequence:
          
PDU-SET upsSetStartingAddress <addr>
PDU-SET upsParametersRead <number>
PDU-GET upsParameterTableSize
PDU-GET upsParameterValue 1
PDU-GET upsParameterValue 2
..
PDU-GET upsParameterValue <number>
          
The table is read up to requested number of events and the
management software afterwards decides which entries are
valid, as indicated by the upsParameterTableSize.
          
Write sequence:
          
PDU-SET upsSetStartingAddress <addr>
PDU-SET upsParameterValue 1
PDU-SET upsParameterValue 2
..
PDU-SET upsParameterValue <number>
PDU-SET upsParametersWrite <number>

upsParameterFifthEntry row .1.3.6.1.4.1.818.1.1.15.10.11.1

An entry containing information applicable to a
particular parameter.

Indexes

No indexes recorded

Column	Syntax	OID
upsParameterLineIndexfifth The parameter line identifier.	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.15.10.11.1.1
upsParameterValuefifth The parameter value in numerical format.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.818.1.1.15.10.11.1.2

A list of input table entries.  The number of entries
is given by the value of upsInputNumLines.(*)

upsInputSixthEntry row .1.3.6.1.4.1.818.1.1.16.3.3.1

An entry containing information applicable to a
particular input line.(*)

Indexes

No indexes recorded

Column	Syntax	OID
upsInputLineIndexsixth The input line identifier.(*)	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.16.3.3.1.1
upsInputFrequencysixth The present input frequency.(*)	0.1 HertzNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.16.3.3.1.2
upsInputVoltagesixth The magnitude of the present input voltage.(*)	RMS VoltsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.16.3.3.1.3
upsInputCurrentsixth The magnitude of the present input current.(*)	0.1 RMS AmpNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.16.3.3.1.4
upsInputTruePowersixth The magnitude of the present input true power.(*)	WattsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.16.3.3.1.5
upsInputVoltageMinsixth The lowest magnitude of the input voltage since last read out.	RMS VoltsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.16.3.3.1.6
upsInputVoltageMaxsixth The highest magnitude of the input voltage since last read out.	RMS VoltsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.16.3.3.1.7

A list of output table entries.  The number of
entries is given by the value of upsOutputNumLines.(*)

upsOutputSixthEntry row .1.3.6.1.4.1.818.1.1.16.4.4.1

An entry containing information applicable to a
particular output line.(*)

Indexes

No indexes recorded

Column	Syntax	OID
upsOutputLineIndexsixth The output line identifier.(*)	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.16.4.4.1.1
upsOutputVoltagesixth The present output voltage.(*)	RMS VoltsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.16.4.4.1.2
upsOutputCurrentsixth The present output current.(*)	0.1 RMS AmpNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.16.4.4.1.3
upsOutputPowersixth The present output true power.(*)	WattsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.16.4.4.1.4
upsOutputPercentLoadsixth The percentage of the UPS power capacity presently being used on this output line, i.e., the greater of the percent load of true power capacity and the percent load of VA.(*)	percentInteger32	.1.3.6.1.4.1.818.1.1.16.4.4.1.5
upsOutputPowerFactorsixth The present output power factor. The returned value correspond to the cosf of the load. A positive value indicate an inductive load; a negative value indicate a capacitive load; value 1 indicate a resistive load. If…	0.01 cos phiInteger32	.1.3.6.1.4.1.818.1.1.16.4.4.1.6
upsOutputPeakCurrentsixth The present output peak current.(*)	AmpsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.818.1.1.16.4.4.1.7
upsOutputShareCurrentsixth In a parallel system ideally all the UPS are requested to contribute to the load with the same amount of current, i.e. with no current share. The current share occurs when an UPS exchanges some current with another UP…	AmpsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.818.1.1.16.4.4.1.8

A list of bypass table entries.  The number of
entries is given by the value of upsBypassNumLines.(*)

upsBypassSixthEntry row .1.3.6.1.4.1.818.1.1.16.5.3.1

An entry containing information applicable to a
particular bypass input.(*)

Indexes

No indexes recorded

Column	Syntax	OID
upsBypassLineIndexsixth The bypass line identifier.(*)	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.16.5.3.1.1
upsBypassVoltagesixth The present bypass voltage.(*)	RMS VoltsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.16.5.3.1.2
upsBypassCurrentsixth The present bypass current.(*)	0.1 RMS AmpNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.16.5.3.1.3
upsBypassPowersixth The present true power conveyed by the bypass.(*)	WattsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.16.5.3.1.4

A list of alarm table entries.  The table contains
zero, one, or many rows at any moment, depending upon
the number of alarm conditions in effect.  The table
is initially empty at agent startup.  The agent
creates a row in the table each time a condition is
detected and deletes that row when that condition no
longer pertains.  The agent creates the first row with
upsAlarmId equal to 1, and increments the value of
upsAlarmId each time a new row is created, wrapping to
the first free value greater than or equal to 1 when
the maximum value of upsAlarmId would otherwise be
exceeded.  Consequently, after multiple operations,
the table may become sparse, e.g., containing entries
for rows 95, 100, 101, and 203 and the entries should
not be assumed to be in chronological order because
upsAlarmId might have wrapped.
          
Alarms are named by an AutonomousType (OBJECT
IDENTIFIER), upsAlarmDescr, to allow a single table to
reflect well known alarms plus alarms defined by a
particular implementation, i.e., as documented in the
private enterprise MIB definition for the device.  No
two rows will have the same value of upsAlarmDescr,
since alarms define conditions.  In order to meet this
requirement, care should be taken in the definition of
alarm conditions to insure that a system cannot enter
the same condition multiple times simultaneously.
          
The number of rows in the table at any given time is
reflected by the value of upsAlarmsPresent.(*)

upsAlarmSixthEntry row .1.3.6.1.4.1.818.1.1.16.6.2.1

An entry containing information applicable to a
particular alarm.(*)

Indexes

No indexes recorded

Column	Syntax	OID
upsAlarmIdsixth A unique identifier for an alarm condition. This value must remain constant.(*)	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.16.6.2.1.1
upsAlarmDescrsixth A reference to an alarm description object. The object referenced should not be accessible, but rather be used to provide a unique description of the alarm condition.(*)	SNMPv2-TCAutonomousType Description: Represents an independently extensible type identification value. It may, for example, indicate a particular sub-tree with further MIB definitions, or define a particular type of protocol or hardware.	.1.3.6.1.4.1.818.1.1.16.6.2.1.2
upsAlarmTimesixth The value of sysUpTime when the alarm condition was detected. If the alarm condition was detected at the time of agent startup and presumably existed before agent startup, the value of upsAlarmTime shall equal 0.(*)	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.818.1.1.16.6.2.1.3

A list of receptacle table entries.  The number of
entries is given by the value of upsReceptacleNum.

upsReceptacleSixthEntry row .1.3.6.1.4.1.818.1.1.16.8.7.1

An entry containing information applicable to a
particular receptacle.

Indexes

No indexes recorded

Column	Syntax	OID
upsReceptacleLineIndexsixth The receptacle line identifier.	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.16.8.7.1.1
upsReceptacleOnOffsixth The present state of the receptacle. Setting this object to 'on' will cause the receptacle to be turned on. Setting this object to 'off' will turn the receptacle off. If the receptacle is already in the desired state n…	Enumerationr/w	.1.3.6.1.4.1.818.1.1.16.8.7.1.2

A list of event table entries.  The number of entries is always
10, and the value of upsEventTableSize gives the number of valid
entries from the begging of the table.  Invalid entries return 0.
          
To prevent problems with simultaneous queries from several agents,
these values MUST be accessed using several PDUs in the
same SNMP message (<number> is (1..10)):
          
PDU-SET upsSetStartingTimeStamp <time> 
PDU-SET upsEventGetNext <number>
PDU-GET upsEventTableSize
PDU-GET upsEventCode,upsEventStatus,upsEventTime 1
PDU-GET upsEventCode,upsEventStatus,upsEventTime 2
..
PDU-GET upsEventCode,upsEventStatus,upsEventTime <number>
          
The table is read up to requested number of events and the
management software afterwards decides which entries are
valid, as indicated by the upsEventTableSize.

upsEventSixthEntry row .1.3.6.1.4.1.818.1.1.16.10.6.1

An entry containing information applicable to a
particular event.

Indexes

No indexes recorded

Column	Syntax	OID
upsEventLineIndexsixth The event line identifier.	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.16.10.6.1.1
upsEventCodesixth The event code in numerical format.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.818.1.1.16.10.6.1.2
upsEventStatussixth The status of the UPS at the moment that the event was generated. The format is specified at the 'upsStatus' command. If the UPS is not able to deliver status information, then SNMPNOSUCHNAME is returned.	NonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.16.10.6.1.3
upsEventTimesixth The timestamp of the moment the event was generated.	NonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.16.10.6.1.4

A list of parameter entries. The number of entries is always
16, and the value of upsParameterTableSize gives the number of valid
entries from the begging of the table. Invalid entries return 0.
          
To prevent problems with simultaneous queries from several agents,
these values MUST be accessed using several PDUs in the
same SNMP message (<number> is (1..16)):
          
Read sequence:
          
PDU-SET upsSetStartingAddress <addr>
PDU-SET upsParametersRead <number>
PDU-GET upsParameterTableSize
PDU-GET upsParameterValue 1
PDU-GET upsParameterValue 2
..
PDU-GET upsParameterValue <number>
          
The table is read up to requested number of events and the
management software afterwards decides which entries are
valid, as indicated by the upsParameterTableSize.
          
Write sequence:
          
PDU-SET upsSetStartingAddress <addr>
PDU-SET upsParameterValue 1
PDU-SET upsParameterValue 2
..
PDU-SET upsParameterValue <number>
PDU-SET upsParametersWrite <number>

upsParameterSixthEntry row .1.3.6.1.4.1.818.1.1.16.10.11.1

An entry containing information applicable to a
particular parameter.

Indexes

No indexes recorded

Column	Syntax	OID
upsParameterLineIndexsixth The parameter line identifier.	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.16.10.11.1.1
upsParameterValuesixth The parameter value in numerical format.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.818.1.1.16.10.11.1.2

A list of input table entries.  The number of entries
is given by the value of upsInputNumLines.(*)

upsInputSeventhEntry row .1.3.6.1.4.1.818.1.1.17.3.3.1

An entry containing information applicable to a
particular input line.(*)

Indexes

No indexes recorded

Column	Syntax	OID
upsInputLineIndexseventh The input line identifier.(*)	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.17.3.3.1.1
upsInputFrequencyseventh The present input frequency.(*)	0.1 HertzNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.17.3.3.1.2
upsInputVoltageseventh The magnitude of the present input voltage.(*)	RMS VoltsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.17.3.3.1.3
upsInputCurrentseventh The magnitude of the present input current.(*)	0.1 RMS AmpNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.17.3.3.1.4
upsInputTruePowerseventh The magnitude of the present input true power.(*)	WattsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.17.3.3.1.5
upsInputVoltageMinseventh The lowest magnitude of the input voltage since last read out.	RMS VoltsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.17.3.3.1.6
upsInputVoltageMaxseventh The highest magnitude of the input voltage since last read out.	RMS VoltsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.17.3.3.1.7

A list of output table entries.  The number of
entries is given by the value of upsOutputNumLines.(*)

upsOutputSeventhEntry row .1.3.6.1.4.1.818.1.1.17.4.4.1

An entry containing information applicable to a
particular output line.(*)

Indexes

No indexes recorded

Column	Syntax	OID
upsOutputLineIndexseventh The output line identifier.(*)	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.17.4.4.1.1
upsOutputVoltageseventh The present output voltage.(*)	RMS VoltsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.17.4.4.1.2
upsOutputCurrentseventh The present output current.(*)	0.1 RMS AmpNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.17.4.4.1.3
upsOutputPowerseventh The present output true power.(*)	WattsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.17.4.4.1.4
upsOutputPercentLoadseventh The percentage of the UPS power capacity presently being used on this output line, i.e., the greater of the percent load of true power capacity and the percent load of VA.(*)	percentInteger32	.1.3.6.1.4.1.818.1.1.17.4.4.1.5
upsOutputPowerFactorseventh The present output power factor. The returned value correspond to the cosf of the load. A positive value indicate an inductive load; a negative value indicate a capacitive load; value 1 indicate a resistive load. If…	0.01 cos phiInteger32	.1.3.6.1.4.1.818.1.1.17.4.4.1.6
upsOutputPeakCurrentseventh The present output peak current.(*)	AmpsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.818.1.1.17.4.4.1.7
upsOutputShareCurrentseventh In a parallel system ideally all the UPS are requested to contribute to the load with the same amount of current, i.e. with no current share. The current share occurs when an UPS exchanges some current with another UP…	AmpsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.818.1.1.17.4.4.1.8

A list of bypass table entries.  The number of
entries is given by the value of upsBypassNumLines.(*)

upsBypassSeventhEntry row .1.3.6.1.4.1.818.1.1.17.5.3.1

An entry containing information applicable to a
particular bypass input.(*)

Indexes

No indexes recorded

Column	Syntax	OID
upsBypassLineIndexseventh The bypass line identifier.(*)	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.17.5.3.1.1
upsBypassVoltageseventh The present bypass voltage.(*)	RMS VoltsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.17.5.3.1.2
upsBypassCurrentseventh The present bypass current.(*)	0.1 RMS AmpNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.17.5.3.1.3
upsBypassPowerseventh The present true power conveyed by the bypass.(*)	WattsNonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.17.5.3.1.4

A list of alarm table entries.  The table contains
zero, one, or many rows at any moment, depending upon
the number of alarm conditions in effect.  The table
is initially empty at agent startup.  The agent
creates a row in the table each time a condition is
detected and deletes that row when that condition no
longer pertains.  The agent creates the first row with
upsAlarmId equal to 1, and increments the value of
upsAlarmId each time a new row is created, wrapping to
the first free value greater than or equal to 1 when
the maximum value of upsAlarmId would otherwise be
exceeded.  Consequently, after multiple operations,
the table may become sparse, e.g., containing entries
for rows 95, 100, 101, and 203 and the entries should
not be assumed to be in chronological order because
upsAlarmId might have wrapped.
          
Alarms are named by an AutonomousType (OBJECT
IDENTIFIER), upsAlarmDescr, to allow a single table to
reflect well known alarms plus alarms defined by a
particular implementation, i.e., as documented in the
private enterprise MIB definition for the device.  No
two rows will have the same value of upsAlarmDescr,
since alarms define conditions.  In order to meet this
requirement, care should be taken in the definition of
alarm conditions to insure that a system cannot enter
the same condition multiple times simultaneously.
          
The number of rows in the table at any given time is
reflected by the value of upsAlarmsPresent.(*)

upsAlarmSeventhEntry row .1.3.6.1.4.1.818.1.1.17.6.2.1

An entry containing information applicable to a
particular alarm.(*)

Indexes

No indexes recorded

Column	Syntax	OID
upsAlarmIdseventh A unique identifier for an alarm condition. This value must remain constant.(*)	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.17.6.2.1.1
upsAlarmDescrseventh A reference to an alarm description object. The object referenced should not be accessible, but rather be used to provide a unique description of the alarm condition.(*)	SNMPv2-TCAutonomousType Description: Represents an independently extensible type identification value. It may, for example, indicate a particular sub-tree with further MIB definitions, or define a particular type of protocol or hardware.	.1.3.6.1.4.1.818.1.1.17.6.2.1.2
upsAlarmTimeseventh The value of sysUpTime when the alarm condition was detected. If the alarm condition was detected at the time of agent startup and presumably existed before agent startup, the value of upsAlarmTime shall equal 0.(*)	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.818.1.1.17.6.2.1.3

A list of receptacle table entries.  The number of
entries is given by the value of upsReceptacleNum.

upsReceptacleSeventhEntry row .1.3.6.1.4.1.818.1.1.17.8.7.1

An entry containing information applicable to a
particular receptacle.

Indexes

No indexes recorded

Column	Syntax	OID
upsReceptacleLineIndexseventh The receptacle line identifier.	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.17.8.7.1.1
upsReceptacleOnOffseventh The present state of the receptacle. Setting this object to 'on' will cause the receptacle to be turned on. Setting this object to 'off' will turn the receptacle off. If the receptacle is already in the desired state n…	Enumerationr/w	.1.3.6.1.4.1.818.1.1.17.8.7.1.2

A list of event table entries.  The number of entries is always
10, and the value of upsEventTableSize gives the number of valid
entries from the begging of the table.  Invalid entries return 0.
          
To prevent problems with simultaneous queries from several agents,
these values MUST be accessed using several PDUs in the
same SNMP message (<number> is (1..10)):
          
PDU-SET upsSetStartingTimeStamp <time> 
PDU-SET upsEventGetNext <number>
PDU-GET upsEventTableSize
PDU-GET upsEventCode,upsEventStatus,upsEventTime 1
PDU-GET upsEventCode,upsEventStatus,upsEventTime 2
..
PDU-GET upsEventCode,upsEventStatus,upsEventTime <number>
          
The table is read up to requested number of events and the
management software afterwards decides which entries are
valid, as indicated by the upsEventTableSize.

upsEventSeventhEntry row .1.3.6.1.4.1.818.1.1.17.10.6.1

An entry containing information applicable to a
particular event.

Indexes

No indexes recorded

Column	Syntax	OID
upsEventLineIndexseventh The event line identifier.	PositiveInteger32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.818.1.1.17.10.6.1.1
upsEventCodeseventh The event code in numerical format.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.818.1.1.17.10.6.1.2
upsEventStatusseventh The status of the UPS at the moment that the event was generated. The format is specified at the 'upsStatus' command. If the UPS is not able to deliver status information, then SNMPNOSUCHNAME is returned.	NonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.17.10.6.1.3
upsEventTimeseventh The timestamp of the moment the event was generated.	NonNegativeInteger32 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.818.1.1.17.10.6.1.4