FS-BFD-MIB Table View

The BFD Session Table describes the BFD sessions.

fsBfdSessEntry row .1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1

The BFD Session Entry describes BFD session.

Indexes

No indexes recorded

Column	Syntax	OID
fsBfdSessIndex This object contains an index used to represent a unique BFD session on this device.	FSBfdSessIndexTC Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.1
fsBfdSessVersionNumber The version number of the BFD protocol that this session is running in. Write access is available for this object to provide ability to set desired version for this BFD session.	Unsigned32r/w	.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.2
fsBfdSessType This object specifies the type of this BFD session.	FSBfdSessTypeTCr/w Type Values: 1 singleHop 2 multiHopTotallyArbitraryPaths 3 multiHopOutOfBandSignaling 4 multiHopUnidirectionalLinks 5 multiPointHead 6 multiPointTail	.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.3
fsBfdSessDiscriminator This object specifies the local discriminator for this BFD session, used to uniquely identify it.	Unsigned32	.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.4
fsBfdSessRemoteDiscr This object specifies the session discriminator chosen by the remote system for this BFD session. The value may be zero(0) if the remote discriminator is not yet known or if the session is in the down or adminDown(1) s…	Unsigned32	.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.5
fsBfdSessDestinationUdpPort This object specifies the destination UDP port number used for this BFD session's control packets. The value may be zero(0) if the session is in adminDown(1) state.	FSBfdCtrlDestPortNumberTCr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.6
fsBfdSessSourceUdpPort This object specifies the source UDP port number used for this BFD session's control packets. The value may be zero(0) if the session is in adminDown(1) state. Upon creation of a new BFD session via this MIB, the value …	FSBfdCtrlSourcePortNumberTCr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.7
fsBfdSessEchoSourceUdpPort This object specifies the source UDP port number used for this BFD session's echo packets. The value may be zero(0) if the session is not running in the echo mode, or the session is in adminDown(1) state. Upon creation …	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.8
fsBfdSessAdminStatus A transition from 'stop' to 'start' will start the BFD state machine for the session. The state machine will have an initial state of down. A transition from 'start' to 'stop' will cause the BFD sesssion to be brought d…	Enumerationr/w	.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.9
fsBfdSessState BFD session state.	FSBfdSessStateTC Type Values: 1 adminDown 2 down 3 init 4 up 5 failing	.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.10
fsBfdSessRemoteHeardFlag This object specifies status of BFD packet reception from the remote system. Specifically, it is set to true(1) if the local system is actively receiving BFD packets from the remote system, and is set to false(2) if the…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.11
fsBfdSessDiag A diagnostic code specifying the local system's reason for the last transition of the session from up(4) to some other state.	FSBfdDiagTC Type Values: 0 noDiagnostic 1 controlDetectionTimeExpired 2 echoFunctionFailed 3 neighborSignaledSessionDown 4 forwardingPlaneReset 5 pathDown 6 concatenatedPathDown 7 administrativelyDown 8 reverseConcatenatedPathDown	.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.12
fsBfdSessOperMode This object specifies current operating mode that BFD session is operating in.	FSBfdSessOperModeTCr/w Type Values: 1 asyncModeWEchoFunction 2 asynchModeWOEchoFunction 3 demandModeWEchoFunction 4 demandModeWOEchoFunction	.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.13
fsBfdSessDemandModeDesiredFlag This object indicates that the local system's desire to use Demand mode. Specifically, it is set to true(1) if the local system wishes to use Demand mode or false(2) if not	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.14
fsBfdSessControlPlaneIndepFlag This object indicates that the local system's ability to continue to function through a disruption of the control plane. Specifically, it is set to true(1) if the local system BFD implementation is independent of the co…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.15
fsBfdSessMultipointFlag This object indicates the Multipoint (M) bit for this session. It is set to true(1) if Multipoint (M) bit is set to 1. Otherwise, the value is set to false(2)	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.16
fsBfdSessInterface This object contains an interface index used to indicate the interface which this BFD session is running on. This value can be zero if there is no interface associated with this BFD session.	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.17
fsBfdSessSrcAddrType This object specifies IP address type of the source IP address of this BFD session. Only values unknown(0), ipv4(1), ipv6(2), or ipv6z(4) have to be supported. The value of unknown(0) is allowed only when the session is…	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.18
fsBfdSessSrcAddr This object specifies the source IP address of this BFD session.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.19
fsBfdSessDstAddrType This object specifies IP address type of the neighboring IP address which is being monitored with this BFD session. Only values unknown(0), ipv4(1), ipv6(2), or ipv6z(4) have to be supported. The value of unknown(0) is …	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.20
fsBfdSessDstAddr This object specifies the neighboring IP address which is being monitored with this BFD session.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.21
fsBfdSessGTSM Setting the value of this object to true(1) will enable GTSM protection of the BFD session. GTSM MUST be enabled on a singleHop(1) session if no authentication is in use.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.22
fsBfdSessGTSMTTL This object is valid only when fsBfdSessGTSM protection is enabled on the system. This object specifies the minimum allowed TTL for received BFD control packets. For singleHop(1) session, if GTSM protection is enabled, …	Unsigned32r/w	.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.23
fsBfdSessDesiredMinTxInterval This object specifies the minimum interval, in microseconds, that the local system would like to use when transmitting BFD Control packets. The value of zero(0) is reserved, and should not be used.	FSBfdIntervalTCr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.24
fsBfdSessReqMinRxInterval This object specifies the minimum interval, in microseconds, between received BFD Control packets the local system is capable of supporting. The value of zero(0) can be specified when the transmitting system does not w…	FSBfdIntervalTCr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.25
fsBfdSessReqMinEchoRxInterval This object specifies the minimum interval, in microseconds, between received BFD Echo packets that this system is capable of supporting. Value must be zero(0) if this is a multihop BFD session.	FSBfdIntervalTCr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.26
fsBfdSessDetectMult This object specifies the Detect time multiplier.	FSBfdMultiplierTCr/w Type Constraints: range: 1..255	.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.27
fsBfdSessNegotiatedInterval This object specifies the negotiated interval, in microseconds, that the local system is transmitting BFD Control packets.	FSBfdIntervalTC Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.28
fsBfdSessNegotiatedEchoInterval This object specifies the negotiated interval, in microseconds, that the local system is transmitting BFD echo packets. Value is expected to be zero if the sessions is not running in echo mode.	FSBfdIntervalTC Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.29
fsBfdSessNegotiatedDetectMult This object specifies the Detect time multiplier.	FSBfdMultiplierTC Type Constraints: range: 1..255	.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.30
fsBfdSessAuthPresFlag This object indicates that the local system's desire to use Authentication. Specifically, it is set to true(1) if the local system wishes the session to be authenticated or false(2) if not.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.31
fsBfdSessAuthenticationType The Authentication Type used for this BFD session. This field is valid only when the Authentication Present bit is set. Max-access to this object as well as other authentication related objects are set to read-create in…	FSBfdSessAuthenticationTypeTCr/w Type Values: -1 noAuthentication 0 reserved 1 simplePassword 2 keyedMD5 3 meticulousKeyedMD5 4 keyedSHA1 5 meticulousKeyedSHA1	.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.32
fsBfdSessAuthenticationKeyID The authentication key ID in use for this session. This object permits multiple keys to be active simultaneously. When fsBfdSessAuthPresFlag is false(2), then the value of this object MUST be -1. The value -1 indicate…	Integer32r/w	.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.33
fsBfdSessAuthenticationKey The authentication key. When the fsBfdSessAuthenticationType is simplePassword(1), the value of this object is the password present in the BFD packets. When the fsBfdSessAuthentication type is one of the…	FSBfdSessionAuthenticationKeyTCr/w Type Constraints: range: 0..252	.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.34
fsBfdSessStorageType This variable indicates the storage type for this object. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.35
fsBfdSessRowStatus This variable is used to create, modify, and/or delete a row in this table. When a row in this table has a row in the active(1) state, no objects in this row can be modified except the fsBfdSessRowStatus and fsBfdSessSt…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.36
fsBfdSessIfName This object contains an interface name used to indicate the interface which this BFD session is running on. This value can be zero if there is no interface associated with this BFD session.	OctetStringr/w	.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.37
fsBfdSessIfDes This object contains an interface description used to indicate the interface which this BFD session is running on. This value can be zero if there is no interface associated with this BFD session.	OctetStringr/w	.1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.38

This table specifies BFD Session performance counters.

fsBfdSessPerfEntry row .1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1

An entry in this table is created by a BFD-enabled node
for every BFD Session. fsBfdSessPerfDiscTime is used to
indicate potential discontinuity for all counter objects
in this table.

Indexes

No indexes recorded

Column	Syntax	OID
fsBfdSessPerfCtrlPktIn The total number of BFD control messages received for this BFD session. This value MUST be equal to the least significant 32 bits of fsBfdSessPerfCtrlPktInHC.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.1
fsBfdSessPerfCtrlPktOut The total number of BFD control messages sent for this BFD session. It MUST be equal to the least significant 32 bits of significant 32 bits of fsBfdSessPerfCtrlPktOutHC if supported, and MUST do so the …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.2
fsBfdSessPerfCtrlPktDrop The total number of BFD control messages received for this session yet dropped for being invalid. It MUST be equal to the least significant 32 bits of significant 32 bits of fsBfdSessPerfCtrlPktDropHC if…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.3
fsBfdSessPerfCtrlPktDropLastTime The value of sysUpTime on the most recent occasion at which received BFD control message for this session was dropped. If no such up event exists, this object contains a zero value.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.4
fsBfdSessPerfEchoPktIn The total number of BFD echo messages received for this BFD session. It MUST be equal to the least significant 32 bits of significant 32 bits of fsBfdSessPerfEchoPktInHC if supported, and MUST do so the…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.5
fsBfdSessPerfEchoPktOut The total number of BFD echo messages sent for this BFD session. It MUST be equal to the least significant 32 bits of fsBfdSessPerfEchoPktOutHC if supported, and MUST do so the rules spelled out in RFC 2…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.6
fsBfdSessPerfEchoPktDrop The total number of BFD echo messages received for this session yet dropped for being invalid. It MUST be equal to the least significant 32 bits of fsBfdSessPerfEchoPktDropHC if supported, and MUST do so…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.7
fsBfdSessPerfEchoPktDropLastTime The value of sysUpTime on the most recent occasion at which received BFD echo message for this session was dropped. If no such up event exists, this object contains a zero value.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.8
fsBfdSessUpTime The value of sysUpTime on the most recent occasion at which the session came up. If no such up event exists this object contains a zero value.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.9
fsBfdSessPerfLastSessDownTime The value of sysUpTime on the most recent occasion at which the last time communication was lost with the neighbor. If no such down event exist this object contains a zero value.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.10
fsBfdSessPerfLastCommLostDiag The BFD diag code for the last time communication was lost with the neighbor. If no such down event exists this object contains a zero value.	FSBfdDiagTC Type Values: 0 noDiagnostic 1 controlDetectionTimeExpired 2 echoFunctionFailed 3 neighborSignaledSessionDown 4 forwardingPlaneReset 5 pathDown 6 concatenatedPathDown 7 administrativelyDown 8 reverseConcatenatedPathDown	.1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.11
fsBfdSessPerfSessUpCount The number of times this session has gone into the Up state since the system last rebooted.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.12
fsBfdSessPerfDiscTime The value of sysUpTime on the most recent occasion at which any one or more of the session counters suffered a discontinuity. The relevant counters are the specific instances associated with this BFD sess…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.13
fsBfdSessPerfCtrlPktInHC This value represents the total number of BFD control messages received for this BFD session. It MUST be equal to the least significant 32 bits of fsBfdSessPerfCtrlPktInHC if supported, and MUST do so th…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.14
fsBfdSessPerfCtrlPktOutHC This value represents the total number of BFD control messages transmitted for this BFD session. It MUST be equal to the least significant 32 bits of fsBfdSessPerfCtrlPktOut if supported, and MUST do so t…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.15
fsBfdSessPerfCtrlPktDropHC This value represents the total number of BFD control messages received for this BFD session yet dropped for being invalid. It MUST be equal to the least significant 32 bits of fsBfdSessPerfCtrlPktDrop if…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.16
fsBfdSessPerfEchoPktInHC This value represents the total number of BFD echo messages received for this BFD session. It MUST be equal to the least significant 32 bits of fsBfdSessPerfEchoPktIn if supported, and MUST do so the rule…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.17
fsBfdSessPerfEchoPktOutHC This value represents the total number of BFD echo messages transmitted for this BFD session. It MUST be equal to the least significant 32 bits of fsBfdSessPerfEchoPktOut if supported, and MUST do so the …	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.18
fsBfdSessPerfEchoPktDropHC This value represents the total number of BFD echo messages received for this BFD session yet dropped for being invalid. It MUST be equal to the least significant 32 bits of fsBfdSessPerfEchoPktDrop if su…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.19

The BFD Session Discriminator Mapping Table maps a
local discriminator value to associated BFD session's
FSBfdSessIndexTC used in the fsBfdSessionTable.

fsBfdSessDiscMapEntry row .1.3.6.1.4.1.52642.1.1.10.2.48.1.4.1

The BFD Session Discriminator Map Entry describes
BFD session that is mapped to this FSBfdSessIndexTC.

Indexes

No indexes recorded

Column	Syntax	OID
fsBfdSessDiscMapIndex This object specifies the FSBfdSessIndexTC referred to by the indices of this row. In essence, a mapping is provided between these indexes and the FSBfdSessTable.	FSBfdSessIndexTC Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.52642.1.1.10.2.48.1.4.1.1
fsBfdSessDiscMapStorageType This variable indicates the storage type for this object. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.52642.1.1.10.2.48.1.4.1.2
fsBfdSessDiscMapRowStatus This variable is used to create, modify, and/or delete a row in this table. When a row in this table has a row in the active(1) state, no objects in this row can be modified except the fsBfdSessDiscMapRowStatus and fsBf…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.52642.1.1.10.2.48.1.4.1.3

The BFD Session IP Mapping Table maps given
fsBfdSessInterface, fsBfdSessSrcAddrType, fsBfdSessSrcAddr,
fsBfdSessDstAddrType and fsBfdSessDstAddr
to an associated BFD session's FSBfdSessIndexTC used in
the fsBfdSessionTable.

fsBfdSessIpMapEntry row .1.3.6.1.4.1.52642.1.1.10.2.48.1.5.1

The BFD Session IP Map Entry describes
BFD session that is mapped to this FSBfdSessIndexTC.

Indexes

No indexes recorded

Column	Syntax	OID
fsBfdSessIpMapIndex This object specifies the FSBfdSessIndexTC referred to by the indexes of this row. In essence, a mapping is provided between these indexes and the FSBfdSessTable.	FSBfdSessIndexTC Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.52642.1.1.10.2.48.1.5.1.1
fsBfdSessIpMapStorageType This variable indicates the storage type for this object. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.52642.1.1.10.2.48.1.5.1.2
fsBfdSessIpMapRowStatus This variable is used to create, modify, and/or delete a row in this table. When a row in this table has a row in the active(1) state, no objects in this row can be modified except the fsBfdSessIpMapRowStatus and fsBfdS…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.52642.1.1.10.2.48.1.5.1.3