FEC-IPLOADB-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
3
Rows
3
Columns
34
.0.40 · 1 row entry · 4 columns
Uses the bintec variant from /opt/observium/mibs/bintec.
Command help
Walk ipLoadBGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FEC-IPLOADB-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FEC-IPLOADB-MIB::ipLoadBGroupTable'
The ipLoadBGroupTable contains parameters related to the
IP session-based load balancing algorithm. Each entry
defines a load balancing interface group, the members
of this group (interfaces) are associated via specific
entries in the ipLoadBIfTable.
Entries can only be added or deleted by the user.
          
Creating entries: Entries are created by assigning a
value to the ipLoadBGroupId object.
          
Deleting entries: Entries are removed by setting an
entry's ipLoadBGroupDistributionMode object to 'delete'.
ipLoadBGroupEntry row .0.40.1
Indexes
Column Syntax OID
Unique ID for the IP load balancing interface group.
Integer32r/w
Constraints:
range: 0-99
.0.40.1.1
Short Description for the IP load balancing interface
group.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.0.40.1.2
The distribution policy for the sesson-based IP load
balancing algorithm. If set to round-robin(1) new IP
sessions will be distributed to one member of the interface
group according the ratio defined in ipLoadBIfTable
(…
Enumerationr/w
Enumerated Values:
1round-robin
2load-dependent
3download-dependent
4upload-dependent
5static-routing
.0.40.1.3
The distribution mode for the sesson-based IP load
balancing algorithm. This variable determines the
ifOperStatus conditions of the IP load balancing
interface group members to be considered for the
session distribution…
Enumerationr/w
Enumerated Values:
1always
2up-only
10delete
.0.40.1.4
.0.41 · 1 row entry · 14 columns
Uses the bintec variant from /opt/observium/mibs/bintec.
Command help
Walk ipLoadBIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FEC-IPLOADB-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FEC-IPLOADB-MIB::ipLoadBIfTable'
The ipLoadBIfTable contains parameters related to the
IP session-based load balancing algorithm. Each entry
defines a load balancing interface group member via
it's unique interface index. 
Entries can only be added or deleted by the user.
          
Creating entries: Entries are created by assigning a
value to the ipLoadBIfIndex object.
          
Deleting entries: Entries are removed by setting an
entry's ipLoadBIfMode object to 'delete'.
ipLoadBIfEntry row .0.41.1
Indexes
Column Syntax OID
The unique interface index.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.0.41.1.1
The unique ID of the interface group which the interface
specified by the variable ipLoadBIfIndex belongs to.
Integer32r/w
Constraints:
range: 0-99
.0.41.1.2
For statistical IP session distribution only, determines
the fraction of of all sessions or bandwidth consumption
of the whole group projected for this interface.
Integer32r/w
Constraints:
range: 0-100
.0.41.1.3
Currently an auxiliary variable for the user to enable/
disable the associated interface for load balancing or
to delete this entry.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
10delete
.0.41.1.4
Number of distributed IP sessions to the associated
interface since last configuration or status change of
the interface group.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.0.41.1.5
Number of distributed IP sessions to the associated
interface since startup of the system or enabling the
load balancing.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.0.41.1.6
Current bandwidth consumption in bits per second.
Integer32
Type Constraints:
range: -2147483648..2147483647
.0.41.1.7
Current bandwidth consumption (download) in bits per second.
Integer32
Type Constraints:
range: -2147483648..2147483647
.0.41.1.8
Current bandwidth consumption (upload) in bits per second.
Integer32
Type Constraints:
range: -2147483648..2147483647
.0.41.1.9
In conjunction with the variable 'ipLoadBIfRtDest' or
'ipLoadBIfExtRtDest' this setting provides additional
granularity for load balancing group configuration by
checking the association with 'ipRouteTable'/'ipExtRtTabl…
Enumerationr/w
Enumerated Values:
1none
2rt
3extrt
.0.41.1.10
Points to one ipRouteTable entry associated with the
interface index defined in variable ipLoadBIfIndex. If set
it provides additional granularity for load balancing group
configuration, necessary for example if load ba…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.0.41.1.11
Points to one ipExtRtTable entry associated with the
interface index defined in variable ipLoadBIfIndex. If set
it provides additional granularity for load balancing group
configuration, necessary for example if load ba…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.0.41.1.12
Points to one ipHostsAliveTable table entry specified via
'ipHostsAliveIPAddress', therefore in conjunction with the
'Keep Alive Monitoring' feature it's possible to check the
reachability of the subnet determined by ip…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.0.41.1.13
In conjunction with ipLoadBIfTrackingAddr this variable
represents the 'ipHostsAliveState' of the referred
ipHostsAliveTable entry, ipHostsAliveState_down (2) leads to
ipLoadBIfTrackingStatus_down (2), in this case this…
Enumeration
Enumerated Values:
1up
2down
.0.41.1.20
.0.66 · 1 row entry · 16 columns
Uses the bintec variant from /opt/observium/mibs/bintec.
Command help
Walk iploadBExtHandlingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FEC-IPLOADB-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FEC-IPLOADB-MIB::iploadBExtHandlingTable'
The iploadBExtHandlingTable contains IP-related parameters
in order to specify special load balancing handling
for specific traffic like HTTPS sessions for example.
The intention is to share the same load balancing decision
(which means usage of the same destination interface) for
different but subsequent sessions belonging together on higher
level context. This stickiness of a load balancing decision
has a configurable minimum livetime.
Entries can only be added or deleted by the user.
Column Syntax OID
The unique index.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.0.66.1.1
This object is an description name for this entry
OctetStringr/w
Constraints:
range: 0-64
.0.66.1.2
The administrative status of this entry.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
10delete
.0.66.1.3
Order is used to get a first match, because best match
search is not possible here.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.0.66.1.4
The value of the protocol field in the ip header.
A value of 0 means not to check this value.
Enumerationr/w
Enumerated Values:
0dont-verify
1icmp
2igmp
3ggp
6tcp
8egp
12pup
17udp
20hmp
22xns-idp
27rdp
41ipv6
46rsvp
47gre
50esp
51ah
88igrp
89ospf
103pim
115l2tp
.0.66.1.5
The source IP address, used in conjunction with
iploadBExtHandlingSrcMask. A value of 0 means not to check
this value.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.0.66.1.6
The source IP address mask, used in conjunction with
iploadBExtHandlingSrcAddr.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.0.66.1.7
The starting UDP/TCP source port.
A value of -1 means not to check this value.
Integer32r/w
Constraints:
range: -1-65535
.0.66.1.8
The ending UDP/TCP source port.
A value of -1 means not to check this value.
Integer32r/w
Constraints:
range: -1-65535
.0.66.1.9
The source interface.
A value of -1 means not to check this value.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.0.66.1.10
The destination IP address, used in conjunction with
iploadBExtHandlingDstMask. A value of 0 means not to check
this value.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.0.66.1.11
The destination IP address mask, used in conjunction with
iploadBExtHandlingDstAddr.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.0.66.1.12
The starting UDP/TCP destination port.
A value of -1 means not to check this value.
Integer32r/w
Constraints:
range: -1-65535
.0.66.1.13
The ending UDP/TCP destination port.
A value of -1 means not to check this value.
Integer32r/w
Constraints:
range: -1-65535
.0.66.1.14
This variabl specifies the minmum lifetime of load balancing
decisions' stickiness which was triggered by a matching
session before.
sInteger32r/w
Constraints:
range: 30-2147483647
.0.66.1.15
Specifies the granularity of the stickiness,
((1) enabled or (0) disabled)
srcIP : source IP has to match exactly
dstIP : destination IP has to match exactly
dstPort: destination port has to match exactly
Bitsr/w
Enumerated Values:
0srcIP
1dstIP
2dstPort
.0.66.1.16