FCMGMT-MIB Table View

The connectivity table contains general information
on the system's units. This is the list of units under
a single SNMP agent. The number of entries is given by
the value of uNumber. It is 1 for stand-alone system.

connUnitEntry row .1.3.6.1.3.94.1.6.1

A connectivity unit entry containing objects for a
particular unit.

Indexes

connUnitId

Column	Syntax	OID
connUnitIdmandatory The unique identification for this connectivity unit among those within this proxy domain. The value MUST be unique within the proxy domain because it is the index variable for connUnitTable. The value assigned to a g…	FcGlobalId Type Constraints: range: 16	.1.3.6.1.3.94.1.6.1.1
connUnitGlobalIdmandatory An optional global-scope identifier for this connectivity unit. It MUST be a WWN for this connectivity unit or 16 octets of value zero. WWN formats requiring fewer than 16 octets MUST be extended to 16 octets with tra…	FcGlobalId Type Constraints: range: 16	.1.3.6.1.3.94.1.6.1.2
connUnitTypemandatory The type of this connectivity unit.	FcUnitType Type Values: 1 unknown 2 other 3 hub 4 switch 5 gateway 6 converter 7 hba 8 proxy-agent 9 storage-device 10 host 11 storage-subsystem 12 module 13 swdriver 14 storage-access-device 15 wdm 16 ups 17 nas	.1.3.6.1.3.94.1.6.1.3
connUnitNumportsmandatory Number of physical ports in the connectivity unit (internal/embedded, external).	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.3.94.1.6.1.4
connUnitStatemandatory This object reports the overall state of the connectivity unit. The meaning of all values is essentially self-explanatory. Any of these values may occur with any of the ConnUnitStatus values.	Enumeration Enumerated Values: 1 unknown 2 online 3 offline	.1.3.6.1.3.94.1.6.1.5
connUnitStatusmandatory Overall status of the connectivity unit. The goal of this object is to be the single poll point to check the status of the connunit. If there is any other component that has warning, then this should be set to warning, …	Enumeration Enumerated Values: 1 unknown 2 unused 3 ok 4 warning 5 failed	.1.3.6.1.3.94.1.6.1.6
connUnitProductmandatory The connectivity unit vendor's product model name.	OctetString Constraints: range: 0-79	.1.3.6.1.3.94.1.6.1.7
connUnitSnmandatory The serial number for this connectivity unit.	OctetString Constraints: range: 0-79	.1.3.6.1.3.94.1.6.1.8
connUnitUpTimemandatory The number of centiseconds since the last unit initialization.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.3.94.1.6.1.9
connUnitUrlmandatory URL to launch a management application, if applicable. Otherwise empty string. In a standalone unit, this would be the same as the top-level URL. This has the same definition as systemURL for keywords. If write is no…	RFC1213-MIBDisplayStringr/w	.1.3.6.1.3.94.1.6.1.10
connUnitDomainIdmandatory 24 bit Fibre Channel address ID of this connectivity unit, right justified with leading zero's if required. This should be set to the Fibre Channel address ID or if it is a switch it would be set to the Domain Control…	OctetString Constraints: range: 3-3	.1.3.6.1.3.94.1.6.1.11
connUnitProxyMastermandatory A value of 'yes' means this is the proxy master unit for a set of managed units. For example, this could be the only unit with a management card in it for a set of units. A standalone unit should return 'yes' for thi…	Enumeration Enumerated Values: 1 unknown 2 no 3 yes	.1.3.6.1.3.94.1.6.1.12
connUnitPrincipalmandatory Whether this connectivity unit is the principal unit within the group of fabric elements. If this value is not applicable, return unknown.	Enumeration Enumerated Values: 1 unknown 2 no 3 yes	.1.3.6.1.3.94.1.6.1.13
connUnitNumSensorsmandatory Number of sensors in the connUnitSensorTable.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.3.94.1.6.1.14
connUnitStatusChangeTimeobsolete The sysuptime timestamp in centiseconds at which the last status change occurred.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.3.94.1.6.1.15
connUnitConfigurationChangeTimeobsolete The sysuptime timestamp in centiseconds at which the last configuration change occurred.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.3.94.1.6.1.16
connUnitNumRevsmandatory The number of revisions in the connUnitRevsTable.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.3.94.1.6.1.17
connUnitNumZonesobsolete Number of zones defined in connUnitZoneTable.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.3.94.1.6.1.18
connUnitModuleIdmandatory This is a unique id, persistent between boots, that can be used to group a set of connUnits together into a module. The intended use would be to create a connUnit with a connUnitType of 'module' to represent a physical …	FcGlobalId Type Constraints: range: 16	.1.3.6.1.3.94.1.6.1.19
connUnitNamemandatory A display string containing a name for this connectivity unit. This object value should be persistent between boots.	OctetStringr/w Constraints: range: 0-79	.1.3.6.1.3.94.1.6.1.20
connUnitInfomandatory A display string containing information about this connectivity unit. This object value should be persistent between boots.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.3.94.1.6.1.21
connUnitControlmandatory This object is used to control the addressed connUnit. NOTE: 'Cold Start' and 'Warm Start' are as defined in MIB II and are not meant to be a factory reset. resetConnUnitColdStart: th…	Enumerationr/w Enumerated Values: 1 unknown 2 invalid 3 resetConnUnitColdStart 4 resetConnUnitWarmStart 5 offlineConnUnit 6 onlineConnUnit	.1.3.6.1.3.94.1.6.1.22
connUnitContactmandatory Contact information for this connectivity unit. Persistent across boots.	OctetStringr/w Constraints: range: 0-79	.1.3.6.1.3.94.1.6.1.23
connUnitLocationmandatory Location information for this connectivity unit.Persistent across boots.	OctetStringr/w Constraints: range: 0-79	.1.3.6.1.3.94.1.6.1.24
connUnitEventFiltermandatory This value defines the event severity that will be logged by this connectivity unit. All events of severity less than or equal to connUnitEventFilter are logged in connUnitEventTable. Persistent across boots.	FcEventSeverityr/w Type Values: 1 unknown 2 emergency 3 alert 4 critical 5 error 6 warning 7 notify 8 info 9 debug 10 mark	.1.3.6.1.3.94.1.6.1.25
connUnitNumEventsmandatory Number of events currently in the connUnitEventTable.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.3.94.1.6.1.26
connUnitMaxEventsmandatory Max number of events that can be defined in connUnitEventTable.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.3.94.1.6.1.27
connUnitEventCurrIDmandatory The last used event id (connUnitEventIndex).	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.3.94.1.6.1.28
connUnitFabricIDmandatory A globally unique value to identify the fabric that this ConnUnit belongs to, otherwise empty string. This would typically be equal to the connUnitGlobalID of the primary switch in a Fibre Channel fabric.	FcGlobalId Type Constraints: range: 16	.1.3.6.1.3.94.1.6.1.29
connUnitNumLinksmandatory The number of links in the link table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.3.94.1.6.1.30
connUnitVendorIdmandatory The connectivity unit vendor's name.	OctetString Constraints: range: 0-79	.1.3.6.1.3.94.1.6.1.31

Table of the revisions supported by 
connectivity units managed by this agent.

connUnitRevsEntry row .1.3.6.1.3.94.1.7.1

Indexes

connUnitRevsUnitId connUnitRevsIndex

Column	Syntax	OID
connUnitRevsUnitIdmandatory The connUnitId of the connectivity unit that contains this revision table.	FcGlobalId Type Constraints: range: 16	.1.3.6.1.3.94.1.7.1.1
connUnitRevsIndexmandatory A unique value among all connUnitRevsEntrys with the same value of connUnitRevsUnitId, in the range between 1 and connUnitNumRevs[connUnitRevsUnitId].	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.3.94.1.7.1.2
connUnitRevsRevIdmandatory A vendor-specific string identifying a revision of a component of the connUnit indexed by connUnitRevsUnitId.	RFC1213-MIBDisplayString	.1.3.6.1.3.94.1.7.1.3
connUnitRevsDescriptionmandatory Description of a component to which the revision corresponds.	RFC1213-MIBDisplayString	.1.3.6.1.3.94.1.7.1.4

Table of the sensors supported by each
connectivity unit managed by this agent.

connUnitSensorEntry row .1.3.6.1.3.94.1.8.1

Each entry contains the information for a
specific sensor.

Indexes

connUnitSensorUnitId connUnitSensorIndex

Column	Syntax	OID
connUnitSensorUnitIdmandatory The connUnitId of the connectivity unit that contains this sensor table.	FcGlobalId Type Constraints: range: 16	.1.3.6.1.3.94.1.8.1.1
connUnitSensorIndexmandatory A unique value among all connUnitSensorEntrys with the same value of connUnitSensorUnitId, in the range between 1 and connUnitNumSensor[connUnitSensorUnitId].	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.3.94.1.8.1.2
connUnitSensorNamemandatory A textual identification of the sensor intended primarily for operator use.	RFC1213-MIBDisplayString	.1.3.6.1.3.94.1.8.1.3
connUnitSensorStatusmandatory The status indicated by the sensor.	Enumeration Enumerated Values: 1 unknown 2 other 3 ok 4 warning 5 failed	.1.3.6.1.3.94.1.8.1.4
connUnitSensorInfomandatory Miscellaneous static info about the sensor such as its serial number.	RFC1213-MIBDisplayString	.1.3.6.1.3.94.1.8.1.5
connUnitSensorMessagemandatory This describes the status of the sensor as a message. It may also provide more resolution on the sensor indication, for example 'Cover temperature 1503K, above nominal operating range'	RFC1213-MIBDisplayString	.1.3.6.1.3.94.1.8.1.6
connUnitSensorTypemandatory The type of component being monitored by this sensor.	Enumeration Enumerated Values: 1 unknown 2 other 3 battery 4 fan 5 power-supply 6 transmitter 7 enclosure 8 board 9 receiver	.1.3.6.1.3.94.1.8.1.7
connUnitSensorCharacteristicmandatory The characteristics being monitored by this sensor.	Enumeration Enumerated Values: 1 unknown 2 other 3 temperature 4 pressure 5 emf 6 currentValue 7 airflow 8 frequency 9 power 10 door	.1.3.6.1.3.94.1.8.1.8

Generic information on ports for a specific 
connUnit.

connUnitPortEntry row .1.3.6.1.3.94.1.10.1

Each entry contains the information for
a specific port.

Indexes

connUnitPortUnitId connUnitPortIndex

Column	Syntax	OID
connUnitPortUnitIdmandatory The connUnitId of the connectivity unit that contains this port.	FcGlobalId Type Constraints: range: 16	.1.3.6.1.3.94.1.10.1.1
connUnitPortIndexmandatory A unique value among all connUnitPortEntrys on this connectivity unit, between 1 and connUnitNumPort[connUnitPortUnitId].	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.3.94.1.10.1.2
connUnitPortTypemandatory The port type.	Enumeration Enumerated Values: 1 unknown 2 other 3 not-present 4 hub-port 5 n-port 6 nl-port 7 fl-port 8 f-port 9 e-port 10 g-port 11 domain-ctl 12 hub-controller 13 scsi 14 escon 15 lan 16 wan 17 ac 18 dc 19 ssa 20 wdm 21 ib 22 ipstore	.1.3.6.1.3.94.1.10.1.3
connUnitPortFCClassCapmandatory Bit mask that specifies the classes of service capability of this port. If this is not applicable, return all bits set to zero. The bits have the following definition: unknown - 0 class-f …	OctetString Constraints: range: 2-2	.1.3.6.1.3.94.1.10.1.4
connUnitPortFCClassOpmandatory Bit mask that specifies the classes of service that are currently operational. If this is not applicable, return all bits set to zero. This object has the same definition as connUnitPortFCClassCap	OctetString Constraints: range: 2-2	.1.3.6.1.3.94.1.10.1.5
connUnitPortStatemandatory The user selected state of the port hardware.	Enumeration Enumerated Values: 1 unknown 2 online 3 offline 4 bypassed 5 diagnostics	.1.3.6.1.3.94.1.10.1.6
connUnitPortStatusmandatory An overall protocol status for the port. This value of connUnitPortState is not online, then this is reported Unknown.	Enumeration Enumerated Values: 1 unknown 2 unused 3 ready 4 warning 5 failure 6 notparticipating 7 initializing 8 bypass 9 ols 10 other	.1.3.6.1.3.94.1.10.1.7
connUnitPortTransmitterTypemandatory The technology of the port transceiver.	Enumeration Enumerated Values: 1 unknown 2 other 3 unused 4 shortwave 5 longwave 6 copper 7 scsi 8 longwaveNoOFC 9 shortwaveNoOFC 10 longwaveLED 11 ssa	.1.3.6.1.3.94.1.10.1.8
connUnitPortModuleTypemandatory The module type of the port connector.	Enumeration Enumerated Values: 1 unknown 2 other 3 gbic 4 embedded 5 glm 6 gbicSerialId 7 gbicNoSerialId 8 gbicNotInstalled 9 smallFormFactor	.1.3.6.1.3.94.1.10.1.9
connUnitPortWwnmandatory The World Wide Name of the port if applicable, otherwise all zeros.	FcGlobalId Type Constraints: range: 16	.1.3.6.1.3.94.1.10.1.10
connUnitPortFCIdmandatory This is the assigned Fibre Channel ID of this port. This value is expected to be a Big Endian value of 24 bits. If this is loop, then it is the ALPA that is connected. If this is an eport, then it will only contain the…	FcAddressId Type Constraints: range: 3	.1.3.6.1.3.94.1.10.1.11
connUnitPortSnmandatory The serial number of the unit (e.g., for a GBIC). If this is not applicable, return empty string.	OctetString Constraints: range: 0-79	.1.3.6.1.3.94.1.10.1.12
connUnitPortRevisionmandatory The port revision (e.g., for a GBIC).	OctetString Constraints: range: 0-79	.1.3.6.1.3.94.1.10.1.13
connUnitPortVendormandatory The port vendor (e.g., for a GBIC).	OctetString Constraints: range: 0-79	.1.3.6.1.3.94.1.10.1.14
connUnitPortSpeedmandatory The speed of the port in kilobytes per second.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.3.94.1.10.1.15
connUnitPortControlmandatory This object is used to control the addressed connUnit's port. Valid commands are: resetConnUnitPort: If the addressed connUnit allows this operation to be performed to this port, the addressed por…	Enumerationr/w Enumerated Values: 1 unknown 2 invalid 3 resetConnUnitPort 4 bypassConnUnitPort 5 unbypassConnUnitPort 6 offlineConnUnitPort 7 onlineConnUnitPort 8 resetConnUnitPortCounters	.1.3.6.1.3.94.1.10.1.16
connUnitPortNamemandatory A user-defined name for this port. This means that up to DisplayString characters may be supported. If less than, then the name will be truncated in the connunit.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.3.94.1.10.1.17
connUnitPortPhysicalNumbermandatory This is the internal port number this port is known by. In many implementations, this should be the same as connUnitPortIndex. Some implementations may have an internal port representation not compatible with the rule…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.3.94.1.10.1.18
connUnitPortStatObjectobsolete This contains the OID of the first object of the table that contains the statistics for this particular port. If this has a value of zero, then there are no statistics available for this port. The port type information …	ObjectIdentifier	.1.3.6.1.3.94.1.10.1.19
connUnitPortProtocolCapmandatory Bit mask that specifies the driver level protocol capability of this port. If this is not applicable, return all bits set to zero. The bits have the following definition: unknown - 0 Loop …	OctetString Constraints: range: 2-2	.1.3.6.1.3.94.1.10.1.20
connUnitPortProtocolOpmandatory Bit mask that specifies the driver level protocol(s) that are currently operational. If this is not applicable, return all bits set to zero. This object has the same definition as connUnitPortProtocolCap	OctetString Constraints: range: 2-2	.1.3.6.1.3.94.1.10.1.21
connUnitPortNodeWwnmandatory The Node World Wide Name of the port if applicable, otherwise all zeros. This should have the same value for a group of related ports. The container is defined as the largest physical unit. For example, all ports on HB…	FcNameId Type Constraints: range: 8	.1.3.6.1.3.94.1.10.1.22
connUnitPortHWStatemandatory The hardware detected state of the port.	Enumeration Enumerated Values: 1 unknown 2 failed 3 bypassed 4 active 5 loopback 6 txfault 7 noMedia 8 linkDown	.1.3.6.1.3.94.1.10.1.23

The table of connectivity unit events. Errors, 
warnings, and information should be reported
in this table.

connUnitEventEntry row .1.3.6.1.3.94.1.11.1

Each entry contains information on
a specific event for the given
connectivity unit.

Indexes

connUnitEventUnitId connUnitEventIndex

Column	Syntax	OID
connUnitEventUnitIdmandatory The connUnitId of the connectivity unit that contains this event table.	FcGlobalId Type Constraints: range: 16	.1.3.6.1.3.94.1.11.1.1
connUnitEventIndexmandatory Each connectivity unit has its own event buffer. As it wraps, it may write over previous events. This object is an index into the buffer. It is recommended that this table be read using 'getNext's to retrieve the initia…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.3.94.1.11.1.2
connUnitEventIdobsolete The internal event Id. Incremented for each event, ranging between 1 and connUnitMaxEvents. Not used as table index to simplify the agent implementation. When this reaches the end of the range specified by connUnitMax…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.3.94.1.11.1.3
connUnitREventTimemandatory This is the real time when the event occurred. It has the following format. DDMMYYYY HHMMSS DD=day number MM=month number YYYY=year number HH=hour number MM=minute number SS=seconds number If…	OctetString Constraints: range: 0-15	.1.3.6.1.3.94.1.11.1.4
connUnitSEventTimemandatory This is the sysuptime timestamp when the event occurred.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.3.94.1.11.1.5
connUnitEventSeveritymandatory The event severity level.	FcEventSeverity Type Values: 1 unknown 2 emergency 3 alert 4 critical 5 error 6 warning 7 notify 8 info 9 debug 10 mark	.1.3.6.1.3.94.1.11.1.6
connUnitEventTypemandatory The type of this event.	Enumeration Enumerated Values: 1 unknown 2 other 3 status 4 configuration 5 topology	.1.3.6.1.3.94.1.11.1.7
connUnitEventObjectmandatory This is used with the connUnitEventType to identify which object the event refers to. Examples are connUnitPortStatus.connUnitId.connUnitPortIndex, connUnitStatus.connUnitId, etc.	ObjectIdentifier	.1.3.6.1.3.94.1.11.1.8
connUnitEventDescrmandatory The description of the event.	RFC1213-MIBDisplayString	.1.3.6.1.3.94.1.11.1.9

A list of links know to this agent from this
connectivity unit to other connectivity units.

connUnitLinkEntry row .1.3.6.1.3.94.1.12.1

An entry describing a particular link to another.

Indexes

connUnitLinkUnitId connUnitLinkIndex

Column	Syntax	OID
connUnitLinkUnitIdmandatory The connUnitId of the connectivity unit that contains this link table.	FcGlobalId Type Constraints: range: 16	.1.3.6.1.3.94.1.12.1.1
connUnitLinkIndexmandatory This index is used to create a unique value for each entry in the link table with the same connUnitLinkUnitId. The value can only be reused if it is not currently in use and the value is the next candidate to be used. T…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.3.94.1.12.1.2
connUnitLinkNodeIdXmandatory The node WWN of the unit at one end of the link. If the node WWN is unknown and the node is a connUnit in the responding agent then the value of this object MUST BE equal to its connUnitID.	OctetString Constraints: range: 16-16	.1.3.6.1.3.94.1.12.1.3
connUnitLinkPortNumberXmandatory The port number on the unit specified by connUnitLinkNodeIdX if known, otherwise -1. If the value is nonnegative then it will be equal to connUnitPortPhysicalNumber.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.3.94.1.12.1.4
connUnitLinkPortWwnXmandatory The port WWN of the unit specified by connUnitLinkNodeIdX if known, otherwise 16 octets of binary 0	FcGlobalId Type Constraints: range: 16	.1.3.6.1.3.94.1.12.1.5
connUnitLinkNodeIdYmandatory The node WWN of the unit at the other end of the link. If the node WWN is unknown and the node is a connUnit in the responding SNMP agency then the value of this object MUST BE equal to its connUnitID.	OctetString Constraints: range: 16-16	.1.3.6.1.3.94.1.12.1.6
connUnitLinkPortNumberYmandatory The port number on the unit specified by connUnitLinkNodeIdY if known, otherwise -1. If the value is nonnegative then it will be equal to connUnitPortPhysicalNumber.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.3.94.1.12.1.7
connUnitLinkPortWwnYmandatory The port WWN on the unit specified by connUnitLinkNodeIdY if known, otherwise 16 octets of binary 0	FcGlobalId Type Constraints: range: 16	.1.3.6.1.3.94.1.12.1.8
connUnitLinkAgentAddressYmandatory The address of an FCMGMT MIB agent for the node identified by connUnitLinkNodeIdY, if known; otherwise 16 octets of binary 0	OctetString Constraints: range: 16-16	.1.3.6.1.3.94.1.12.1.9
connUnitLinkAgentAddressTypeYmandatory If connUnitLinkAgentAddressY is nonzero, it is a protocol address. ConnUnitLinkAgentAddressTypeY is the the 'address family number' assigned by IANA to identify the address format. (eg, 1 is Ipv4, 2 is Ipv6). If connUni…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.3.94.1.12.1.10
connUnitLinkAgentPortYmandatory The IP port number for the agent. This is provided in case the agent is at a non-standard SNMP port.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.3.94.1.12.1.11
connUnitLinkUnitTypeYmandatory Type of the FC connectivity unit as defined in connUnitType.	FcUnitType Type Values: 1 unknown 2 other 3 hub 4 switch 5 gateway 6 converter 7 hba 8 proxy-agent 9 storage-device 10 host 11 storage-subsystem 12 module 13 swdriver 14 storage-access-device 15 wdm 16 ups 17 nas	.1.3.6.1.3.94.1.12.1.12
connUnitLinkConnIdYmandatory This is the Fibre Channel ID of this port. If the connectivity unit is a switch, this is expected to be a Big Endian value of 24 bits. If this is loop, then it is the ALPA that is connected. If this is an eport, then it…	OctetString Constraints: range: 3-3	.1.3.6.1.3.94.1.12.1.13
connUnitLinkCurrIndexmandatory The last used link index.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.3.94.1.12.1.14

A table containing a row for each IP address/port
number that traps will be sent to.

trapRegEntry row .1.3.6.1.3.94.2.3.1

Ip/Port pair for a specific client.

Indexes

trapRegIpAddress trapRegPort

Column	Syntax	OID
trapRegIpAddressmandatory The Ip address of a client registered for traps.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.3.94.2.3.1.1
trapRegPortmandatory The UDP port to send traps to for this host. Normally this would be the standard trap port (162). This object is an index and must be specified to create a row in this table.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.3.94.2.3.1.2
trapRegFiltermandatory This value defines the trap severity filter for this trap host. The connUnit will send traps to this host that have a severity level less than or equal to this value. The default value of this object is 'warning'.	FcEventSeverityr/w Type Values: 1 unknown 2 emergency 3 alert 4 critical 5 error 6 warning 7 notify 8 info 9 debug 10 mark	.1.3.6.1.3.94.2.3.1.3
trapRegRowStatemandatory Specifies the state of the row. rowDestroy READ: Can never happen. WRITE: Remove this row from the table. rowInactive READ: Indicates that this row does exist, but that traps are not enabled to be …	Enumerationr/w Enumerated Values: 1 rowDestroy 2 rowInactive 3 rowActive	.1.3.6.1.3.94.2.3.1.4

A list of statistics for the fabric port types.

connUnitPortStatEntry row .1.3.6.1.3.94.4.5.1

An entry describing port statistics.

Indexes

connUnitPortStatUnitId connUnitPortStatIndex

Column	Syntax	OID
connUnitPortStatUnitIdmandatory The connUnitId of the connectivity unit that contains this port stat table.	FcGlobalId Type Constraints: range: 16	.1.3.6.1.3.94.4.5.1.1
connUnitPortStatIndexmandatory A unique value among all entries in this table having the same connUnitPortStatUnitId, between 1 and connUnitNumPort[connUnitPortStatUnitId].	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.3.94.4.5.1.2
connUnitPortStatCountErrormandatory A count of the errors that have occured on this port.	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.3
connUnitPortStatCountTxObjectsmandatory The number of frames/packets/IOs/etc that have been transmitted by this port. Note: A Fibre Channel frame starts with SOF and ends with EOF. FC loop devices should not count frames passed through. This value represents …	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.4
connUnitPortStatCountRxObjectsmandatory The number of frames/packets/IOs/etc that have been received by this port. Note: A Fibre Channel frame starts with SOF and ends with EOF. FC loop devices should not count frames passed through. This value represents the…	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.5
connUnitPortStatCountTxElementsmandatory The number of octets or bytes that have been transmitted by this port. One second periodic polling of the port. This value is saved and compared with the next polled value to compute net throughput. Note, for Fibre Chan…	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.6
connUnitPortStatCountRxElementsmandatory The number of octets or bytes that have been received. by this port. One second periodic polling of the port. This value is saved and compared with the next polled value to compute net throughput. Note, for Fibre Channe…	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.7
connUnitPortStatCountBBCreditZeromandatory Count of transitions in/out of BBcredit zero state. The other side is not providing any credit. Note, this is a Fibre Channel stat only.	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.8
connUnitPortStatCountInputBuffersFullmandatory Count of occurrences when all input buffers of a port were full and outbound buffer-to-buffer credit transitioned to zero. There is no credit to provide to other side. Note, this is a Fibre Channel stat only.	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.9
connUnitPortStatCountFBSYFramesmandatory Count of times that FBSY was returned to this port as a result of a frame that could not be delivered to the other end of the link. This occurs if either the Fabric or the destination port is temporarily busy. Port can…	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.10
connUnitPortStatCountPBSYFramesmandatory Count of times that PBSY was returned to this port as a result of a frame that could not be delivered to the other end of the link. This occurs if the destination port is temporarily busy. PBSY can only occur on SOFc1 …	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.11
connUnitPortStatCountFRJTFramesmandatory Count of times that FRJT was returned to this port as a result of a Frame that was rejected by the fabric. Note, This is the total for all classes and is a Fibre Channel only stat.	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.12
connUnitPortStatCountPRJTFramesmandatory Count of times that FRJT was returned to this port as a result of a Frame that was rejected at the destination N_Port. Note, This is the total for all classes and is a Fibre Channel only stat.	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.13
connUnitPortStatCountClass1RxFramesmandatory Count of Class 1 Frames received at this port. Note, this is a Fibre Channel only stat.	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.14
connUnitPortStatCountClass1TxFramesmandatory Count of Class 1 Frames transmitted out this port. Note, this is a Fibre Channel only stat.	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.15
connUnitPortStatCountClass1FBSYFramesmandatory Count of times that FBSY was returned to this port as a result of a Class 1 Frame that could not be delivered to the other end of the link. This occurs if either the Fabric or the destination port is temporarily busy. …	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.16
connUnitPortStatCountClass1PBSYFramesmandatory Count of times that PBSY was returned to this port as a result of a Class 1 Frame that could not be delivered to the other end of the link. This occurs if the destination N_Port is temporarily busy. PBSY can only occur…	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.17
connUnitPortStatCountClass1FRJTFramesmandatory Count of times that FRJT was returned to this port as a result of a Class 1 Frame that was rejected by the fabric. Note, this is a Fibre Channel only stat.	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.18
connUnitPortStatCountClass1PRJTFramesmandatory Count of times that FRJT was returned to this port as a result of a Class 1 Frame that was rejected at the destination N_Port. Note, this is a Fibre Channel only stat.	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.19
connUnitPortStatCountClass2RxFramesmandatory Count of Class 2 Frames received at this port. Note, this is a Fibre Channel only stat.	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.20
connUnitPortStatCountClass2TxFramesmandatory Count of Class 2 Frames transmitted out this port. Note, this is a Fibre Channel only stat.	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.21
connUnitPortStatCountClass2FBSYFramesmandatory Count of times that FBSY was returned to this port as a result of a Class 2 Frame that could not be delivered to the other end of the link. This occurs if either the Fabric or the destination port is temporarily busy. …	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.22
connUnitPortStatCountClass2PBSYFramesmandatory Count of times that PBSY was returned to this port as a result of a Class 2 Frame that could not be delivered to the other end of the link. This occurs if the destination N_Port is temporarily busy. PBSY can only occur…	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.23
connUnitPortStatCountClass2FRJTFramesmandatory Count of times that FRJT was returned to this port as a result of a Class 2 Frame that was rejected by the fabric. Note, this is a Fibre Channel only stat.	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.24
connUnitPortStatCountClass2PRJTFramesmandatory Count of times that FRJT was returned to this port as a result of a Class 2 Frame that was rejected at the destination N_Port. Note, this is a Fibre Channel only stat.	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.25
connUnitPortStatCountClass3RxFramesmandatory Count of Class 3 Frames received at this port. Note, this is a Fibre Channel only stat.	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.26
connUnitPortStatCountClass3TxFramesmandatory Count of Class 3 Frames transmitted out this port. Note, this is a Fibre Channel only stat.	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.27
connUnitPortStatCountClass3Discardsmandatory Count of Class 3 Frames that were discarded upon reception at this port. There is no FBSY or FRJT generated for Class 3 Frames. They are simply discarded if they cannot be delivered. Note, this is a Fibre Channel only…	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.28
connUnitPortStatCountRxMulticastObjectsmandatory Count of Multicast Frames or Packets received at this port.	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.29
connUnitPortStatCountTxMulticastObjectsmandatory Count of Multicast Frames or Packets transmitted out this port.	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.30
connUnitPortStatCountRxBroadcastObjectsmandatory Count of Broadcast Frames or Packets received at this port.	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.31
connUnitPortStatCountTxBroadcastObjectsmandatory Count of Broadcast Frames or Packets transmitted out this port. On a Fibre Channel loop, count only OPNr frames generated.	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.32
connUnitPortStatCountRxLinkResetsmandatory Count of Link resets. This is the number of LRs received. Note, this is a Fibre Channel only stat.	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.33
connUnitPortStatCountTxLinkResetsmandatory Count of Link resets. This is the number LRs transmitted. Note, this is a Fibre Channel only stat.	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.34
connUnitPortStatCountNumberLinkResetsmandatory Count of Link resets and LIPs detected at this port. The number times the reset link protocol is initiated. These are the count of the logical resets, a count of the number of primatives. Note, this is a Fibre Channel o…	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.35
connUnitPortStatCountRxOfflineSequencesmandatory Count of Offline Primitive OLS received at this port. Note, this is a Fibre Channel only stat.	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.36
connUnitPortStatCountTxOfflineSequencesmandatory Count of Offline Primitive OLS transmitted by this port. Note, this is a Fibre Channel only stat.	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.37
connUnitPortStatCountNumberOfflineSequencesmandatory Count of Offline Primitive sequence received at this port. Note, this is a Fibre Channel only stat.	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.38
connUnitPortStatCountLinkFailuresmandatory Count of link failures. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8). Note, this is a Fibre Channel only stat.	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.39
connUnitPortStatCountInvalidCRCmandatory Count of frames received with invalid CRC. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8). Loop ports should not count CRC errors passing through when monitoring. Note, this is a Fibre Channel on…	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.40
connUnitPortStatCountInvalidTxWordsmandatory Count of invalid transmission words received at this port. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8). Note, this is a Fibre Channel only stat.	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.41
connUnitPortStatCountPrimitiveSequenceProtocolErrorsmandatory Count of primitive sequence protocol errors detected at this port. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8). Note, this is a Fibre Channel only stat.	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.42
connUnitPortStatCountLossofSignalmandatory Count of instances of signal loss detected at port. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8). Note, this is a Fibre Channel only stat.	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.43
connUnitPortStatCountLossofSynchronizationmandatory Count of instances of synchronization loss detected at port. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8). Note, this is a Fibre Channel only stat.	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.44
connUnitPortStatCountInvalidOrderedSetsmandatory Count of invalid ordered sets received at port. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8). Note, this is a Fibre Channel only stat.	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.45
connUnitPortStatCountFramesTooLongmandatory Count of frames received at this port where the frame length was greater than what was agreed to in FLOGI/PLOGI. This could be caused by losing the end of frame delimiter. Note, this is a Fibre Channel only stat.	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.46
connUnitPortStatCountFramesTruncatedmandatory Count of frames received at this port where the frame length was less than the minimum indicated by the frame header - normally 24 bytes, but it could be more if the DFCTL field indicates an optional header should have …	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.47
connUnitPortStatCountAddressErrorsmandatory Count of frames received with unknown addressing. e.x. unknown SID or DID. the SID or DID is not known to the routing algorithm. Note. this is a Fibre Channel only stat.	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.48
connUnitPortStatCountDelimiterErrorsmandatory Count of invalid frame delimiters received at this port. An example is a frame with a class 2 start and and a class 3 at the end. Note, this is a Fibre Channel only stat.	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.49
connUnitPortStatCountEncodingDisparityErrorsmandatory Count of disparity errors received at this port. Note, this is a Fibre Channel only stat.	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.4.5.1.50

This table contains an entry for each object registered with
this port in the switch.

connUnitSnsEntry row .1.3.6.1.3.94.5.2.1.1

The Simple Name Server table for the port represented by
ConnUnitSnsPortIndex .

Indexes

connUnitSnsId connUnitSnsPortName connUnitSnsPortIdentifier

Column	Syntax	OID
connUnitSnsIdmandatory The connUnitId of the connectivity unit that contains this Name Server table.	OctetString Constraints: range: 16-16	.1.3.6.1.3.94.5.2.1.1.1
connUnitSnsPortIndexmandatory The physical port number of this SNS table entry. Each physical port has an SNS table with 1-n entries indexed by ConnUnitSnsPortIdentifier (port address)	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.3.94.5.2.1.1.2
connUnitSnsPortIdentifiermandatory The Fibre Channel ID for this entry in the SNS table.	FcAddressId Type Constraints: range: 3	.1.3.6.1.3.94.5.2.1.1.3
connUnitSnsPortNamemandatory The Port WWN for this entry in the SNS table.	FcNameId Type Constraints: range: 8	.1.3.6.1.3.94.5.2.1.1.4
connUnitSnsNodeNamemandatory The Node Name for this entry in the SNS table.	FcNameId Type Constraints: range: 8	.1.3.6.1.3.94.5.2.1.1.5
connUnitSnsClassOfSvcmandatory The Classes of Service offered by this entry in the SNS table. This is a bit mask where each bit that represents the class of service is set to a value of one if the class is supported. Class 1 is bit zero.	OctetString Constraints: range: 1-1	.1.3.6.1.3.94.5.2.1.1.6
connUnitSnsNodeIPAddressmandatory The IPv6 formatted address of the Node for this entry in the SNS table.	OctetString Constraints: range: 16-16	.1.3.6.1.3.94.5.2.1.1.7
connUnitSnsProcAssocmandatory The Process Associator for this entry in the SNS table.	OctetString Constraints: range: 8-8	.1.3.6.1.3.94.5.2.1.1.8
connUnitSnsFC4Typemandatory The FC-4 Types supported by this entry in the SNS table.	OctetString Constraints: range: 32-32	.1.3.6.1.3.94.5.2.1.1.9
connUnitSnsPortTypemandatory The Port Type of this entry in the SNS table.	OctetString Constraints: range: 1-1	.1.3.6.1.3.94.5.2.1.1.10
connUnitSnsPortIPAddressmandatory The IPv6 formatted address of this entry in the SNS table.	OctetString Constraints: range: 16-16	.1.3.6.1.3.94.5.2.1.1.11
connUnitSnsFabricPortNamemandatory The Fabric Port name of this entry in the SNS table.	FcNameId Type Constraints: range: 8	.1.3.6.1.3.94.5.2.1.1.12
connUnitSnsHardAddressmandatory The Hard ALPA of this entry in the SNS table.	FcGlobalId Type Constraints: range: 16	.1.3.6.1.3.94.5.2.1.1.13
connUnitSnsSymbolicPortNamemandatory The Symbolic Port Name of this entry in the SNS table.	OctetString Constraints: range: 0-79	.1.3.6.1.3.94.5.2.1.1.14
connUnitSnsSymbolicNodeNamemandatory The Symbolic Node Name of this entry in the SNS table.	OctetString Constraints: range: 0-79	.1.3.6.1.3.94.5.2.1.1.15