F10-OPENFLOW-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
7
Rows
7
Columns
50

ofInstTable

table
.1.3.6.1.4.1.6027.3.20.1.7 · 1 row entry · 10 columns
Uses the force10 variant from /opt/observium/mibs/force10.
Command help
Walk ofInstTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F10-OPENFLOW-MIB' -M '/opt/observium/mibs/force10:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F10-OPENFLOW-MIB::ofInstTable'
Open Flow Instance Table
ofInstEntry row .1.3.6.1.4.1.6027.3.20.1.7.1
Open Flow Instance Entry: This provides the sequence of objects
that describes the properties of the Instance. ofInstId uniquely
identifies the instance and hence it becomes an index
Indexes
Column Syntax OID
Open Flow Instance Identifier
Unsigned32
Constraints:
range: 0-255
.1.3.6.1.4.1.6027.3.20.1.7.1.1
Open Flow Instance Admin State: tells whether this instance is
enabled or not.
Enumeration
Enumerated Values:
1up
2down
.1.3.6.1.4.1.6027.3.20.1.7.1.2
Open Flow Instance Interface Type: tells whether this instance is
a Port or VLAN or ANY
Enumeration
Enumerated Values:
1port
2vlan
3any
.1.3.6.1.4.1.6027.3.20.1.7.1.3
Open Flow Instance DataPath Identifier
DataPathIdentifier
Type Constraints:
range: 8
.1.3.6.1.4.1.6027.3.20.1.7.1.4
Open Flow Instance Connection Timeout: Tells the time after which the
connection would be dropped
secondsUnsigned32
Constraints:
range: 0-65535
.1.3.6.1.4.1.6027.3.20.1.7.1.5
Open Flow Instance Echo Reply Timeout: Tells the max time for which the
Echo message would wait for reply
secondsUnsigned32
Constraints:
range: 0-65535
.1.3.6.1.4.1.6027.3.20.1.7.1.6
Open Flow Instance Echo Request Interval: Tells how often the Echo
message would be sent
Unsigned32
Constraints:
range: 0-65535
.1.3.6.1.4.1.6027.3.20.1.7.1.7
The current number of flows in this Instance
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6027.3.20.1.7.1.8
Open Flow Instance Supported Capabilities: Gives the supported
capabilities information by setting the appropriate BITS
Bits
Enumerated Values:
0port
1table
2flow
.1.3.6.1.4.1.6027.3.20.1.7.1.9
Open Flow Instance Supported Actions: Gives the supported
Action information by setting the appropriate BITS
Bits
Enumerated Values:
0output
1set-vlan
2set-pcp
3set-smac
4set-dmac
5set-tos
.1.3.6.1.4.1.6027.3.20.1.7.1.10

ofCntlrTable

table
.1.3.6.1.4.1.6027.3.20.1.8 · 1 row entry · 6 columns
Uses the force10 variant from /opt/observium/mibs/force10.
Command help
Walk ofCntlrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F10-OPENFLOW-MIB' -M '/opt/observium/mibs/force10:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F10-OPENFLOW-MIB::ofCntlrTable'
Open Flow Controller Table: This table provides information about the Controller
ofCntlrEntry row .1.3.6.1.4.1.6027.3.20.1.8.1
Open Flow Controller Entry
Column Syntax OID
Open Flow Controller Id: This provides Id of this controller
Unsigned32
Constraints:
range: 0-255
.1.3.6.1.4.1.6027.3.20.1.8.1.1
Open Flow Controller IP Address Type : The address type
of the controller's IP address. If no controller is configured
yet then this is set to unknown(0).
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6027.3.20.1.8.1.2
Open Flow Controller IP Address: This gives the IP Address of
the controller. The InetAddressType of this is given by the
ofCntlrAddrType object.
OctetString
Constraints:
range: 0-0
range: 4-4
range: 8-8
range: 16-16
range: 20-20
.1.3.6.1.4.1.6027.3.20.1.8.1.3
Open Flow Controller Port: This provides the port number to be
used to communicate with the controller
INET-ADDRESS-MIBInetPortNumber
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.6027.3.20.1.8.1.4
Open Flow Controller Protocol: Tells which protocol is being used
by this Controller for communication, either TLS or TCP
Enumeration
Enumerated Values:
1tls
2tcp
.1.3.6.1.4.1.6027.3.20.1.8.1.5
Open Flow Controller Connection State
Enumeration
Enumerated Values:
1down
2up
.1.3.6.1.4.1.6027.3.20.1.8.1.6

ofPortTable

table
.1.3.6.1.4.1.6027.3.20.1.9 · 1 row entry · 2 columns
Uses the force10 variant from /opt/observium/mibs/force10.
Command help
Walk ofPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F10-OPENFLOW-MIB' -M '/opt/observium/mibs/force10:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F10-OPENFLOW-MIB::ofPortTable'
Open Flow Port Table
ofPortEntry row .1.3.6.1.4.1.6027.3.20.1.9.1
Open Flow Port Entry has ports assigned to the instance
Column Syntax OID
The ifIndex value corresponding to this port
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.6027.3.20.1.9.1.1
Open Flow Port Association Type: Tells whether this port
is directly assigned to the instance or via VLAN.
Enumeration
Enumerated Values:
1instancePort
2instVlanPort
.1.3.6.1.4.1.6027.3.20.1.9.1.2

ofVlanTable

table
.1.3.6.1.4.1.6027.3.20.1.10 · 1 row entry · 2 columns
Uses the force10 variant from /opt/observium/mibs/force10.
Command help
Walk ofVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F10-OPENFLOW-MIB' -M '/opt/observium/mibs/force10:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F10-OPENFLOW-MIB::ofVlanTable'
Open Flow VLAN Table containing port list information for
each VLAN configured into the instance.
ofVlanEntry row .1.3.6.1.4.1.6027.3.20.1.10.1
Open Flow VLAN Entry.
Restricted to max 8 VLANs per instance.
Column Syntax OID
The ifIndex value corresponding to this VLAN.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.6027.3.20.1.10.1.1
Open Flow Vlan Id: VALN-ID referring to this VLAN.
Q-BRIDGE-MIBVlanId
Type Constraints:
range: 1..4094
.1.3.6.1.4.1.6027.3.20.1.10.1.2

ofFlowTable

table
.1.3.6.1.4.1.6027.3.20.1.11 · 1 row entry · 9 columns
Uses the force10 variant from /opt/observium/mibs/force10.
Command help
Walk ofFlowTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F10-OPENFLOW-MIB' -M '/opt/observium/mibs/force10:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F10-OPENFLOW-MIB::ofFlowTable'
Open Flow FlowTable
ofFlowEntry row .1.3.6.1.4.1.6027.3.20.1.11.1
Open Flow Instance Flow Entry
Column Syntax OID
OpenFlow Flow Id
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6027.3.20.1.11.1.1
OpenFlow Flow Table Id
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6027.3.20.1.11.1.2
OpenFlow Flow priority
Unsigned32
Constraints:
range: 0-65535
.1.3.6.1.4.1.6027.3.20.1.11.1.3
OpenFlow Flow Idle Time
secondsUnsigned32
Constraints:
range: 0-65535
.1.3.6.1.4.1.6027.3.20.1.11.1.4
OpenFlow Flow Hard Timeout
secondsUnsigned32
Constraints:
range: 0-65535
.1.3.6.1.4.1.6027.3.20.1.11.1.5
The time since the OpenFlow flow was configured to be up.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6027.3.20.1.11.1.6
OpenFlow Flow Cookie String
OctetString
Constraints:
range: 0-64
.1.3.6.1.4.1.6027.3.20.1.11.1.7
OpenFlow Flow Packet Count
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6027.3.20.1.11.1.8
OpenFlow Flow Byte Count
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6027.3.20.1.11.1.9
.1.3.6.1.4.1.6027.3.20.1.12 · 1 row entry · 12 columns
Uses the force10 variant from /opt/observium/mibs/force10.
Command help
Walk ofFlowMatchParamsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F10-OPENFLOW-MIB' -M '/opt/observium/mibs/force10:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F10-OPENFLOW-MIB::ofFlowMatchParamsTable'
Open Flow Match Parameter Table
ofFlowMatchParamsEntry row .1.3.6.1.4.1.6027.3.20.1.12.1
A set of parameters to be mactheded on a particular openFlow Table.
Indexes
No indexes recorded
Column Syntax OID
OpenFlow Flow Match Ingress Ports;
Note that when the value of this object is the
zero-length string, it indicates 'wild card'.
OctetString
Constraints:
range: 0-2
.1.3.6.1.4.1.6027.3.20.1.12.1.1
OpenFlow Flow Match Ethernet Source Address.
Note that when the value of this object is the
zero-length string, it indicates 'wild card'.
OctetString
Constraints:
range: 0-6
.1.3.6.1.4.1.6027.3.20.1.12.1.2
OpenFlow Flow Match Ethernet Destination Address.
Note that when the value of this object is the
zero-length string, it indicates 'wild card'.
OctetString
Constraints:
range: 0-6
.1.3.6.1.4.1.6027.3.20.1.12.1.3
OpenFlow Flow Match Vlan Id.
Note that when the value of this object is the
zero-length string, it indicates 'wild card'.
OctetString
Constraints:
range: 0-2
.1.3.6.1.4.1.6027.3.20.1.12.1.4
OpenFlow Flow Match Ethernet Type.
Note that when the value of this object is the
zero-length string, it indicates 'wild card'.
OctetString
Constraints:
range: 0-2
.1.3.6.1.4.1.6027.3.20.1.12.1.5
OpenFlow Flow Match VLAN Priority.
Note that when the value of this object is the
zero-length string, it indicates 'wild card'.
OctetString
Constraints:
range: 0-1
.1.3.6.1.4.1.6027.3.20.1.12.1.6
OpenFlow Flow Match IP TOS
OctetString
Constraints:
range: 0-1
.1.3.6.1.4.1.6027.3.20.1.12.1.7
OpenFlow Flow match IP Protocol
OctetString
Constraints:
range: 0-1
.1.3.6.1.4.1.6027.3.20.1.12.1.8
OpenFlow Flow Match IP Source Address.
Note that when the value of this object is the
zero-length string, it indicates 'wild card'.
OctetString
Constraints:
range: 0-4
.1.3.6.1.4.1.6027.3.20.1.12.1.9
OpenFlow Flow Match IP Destination Adress.
Note that when the value of this object is the
zero-length string, it indicates 'wild card'.
OctetString
Constraints:
range: 0-4
.1.3.6.1.4.1.6027.3.20.1.12.1.10
OpenFlow Flow Match Transport Source Port.
Note that when the value of this object is the
zero-length string, it indicates 'wild card'.
OctetString
Constraints:
range: 0-2
.1.3.6.1.4.1.6027.3.20.1.12.1.11
OpenFlow Flow Match Transport Destination Port.
Note that when the value of this object is the
zero-length string, it indicates 'wild card'.
OctetString
Constraints:
range: 0-2
.1.3.6.1.4.1.6027.3.20.1.12.1.12
.1.3.6.1.4.1.6027.3.20.1.13 · 1 row entry · 9 columns
Uses the force10 variant from /opt/observium/mibs/force10.
Command help
Walk ofFlowActionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F10-OPENFLOW-MIB' -M '/opt/observium/mibs/force10:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F10-OPENFLOW-MIB::ofFlowActionTable'
OpenFlow Flow Action Table
ofFlowActionEntry row .1.3.6.1.4.1.6027.3.20.1.13.1
OpenFlow Flow Action Entry
Column Syntax OID
Open Flow Action Id
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6027.3.20.1.13.1.1
OpenFlow Flow Action Type - Following are the supported Actions
outToSwitchPort -> Output to switch port.
setVlanVid -> Set the 802.1q VLAN id.
setVlanPcp -> Set the 802.1q priority.
stripVlan -> Strip t…
Enumeration
Enumerated Values:
1outToSwitchPort
2setVlanVid
3setVlanPcp
4stripVlan
5setDlSrc
6setDlDst
7setNetworkSrc
8setNetworkDst
9setNetworkTos
10setTpSrc
11setTpDest
12outToQueue
65535vendor
.1.3.6.1.4.1.6027.3.20.1.13.1.2
OpenFlow Flow Action Source Mac address
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6027.3.20.1.13.1.3
OpenFlow Flow Action Destination Mac
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6027.3.20.1.13.1.4
Ifindex value of OpenFlow Flow Action Port
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.6027.3.20.1.13.1.5
OpenFlow Flow Action VLAN ID
Q-BRIDGE-MIBVlanId
Type Constraints:
range: 1..4094
.1.3.6.1.4.1.6027.3.20.1.13.1.6
OpenFlow Flow Action Max Length
Unsigned32
Constraints:
range: 0-65535
.1.3.6.1.4.1.6027.3.20.1.13.1.7
OpenFlow Flow Action VLAN PCP
Unsigned32
Constraints:
range: 0-255
.1.3.6.1.4.1.6027.3.20.1.13.1.8
OpenFlow Flow Action Network TOS
Unsigned32
Constraints:
range: 0-255
.1.3.6.1.4.1.6027.3.20.1.13.1.9