EXTREME-ERPS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
3
Rows
3
Columns
35
.1.3.6.1.4.1.1916.1.46.1 · 1 row entry · 3 columns
This table contains the grouping of set of protected vlans.
By default a group with GroupId 64 will be created and all vlans
will get mapped to it.
extremeErpsProtectedVlanEntry entry .1.3.6.1.4.1.1916.1.46.1.1
This entry contains vlan id and group id related to ERPS domain.
Indexes
extremeErpsRingName extremeErpsProtectedVlanName
Column Syntax OID
extremeErpsProtectedVlanName
The member Protected VLAN's name.
OctetString
Constraints:
range: 1-32
.1.3.6.1.4.1.1916.1.46.1.1.1
extremeErpsProtectedVlanId
This is the Protected vlan id which is mapped to this group.
Q-BRIDGE-MIBVlanId
Textual Convention: Q-BRIDGE-MIBVlanId Integer32
Type Constraints:
range: 1..4094
.1.3.6.1.4.1.1916.1.46.1.1.2
extremeErpsProtectedVlanRowStatus
The status of this entry as per standard RowStatus conventions.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.1916.1.46.1.1.3
.1.3.6.1.4.1.1916.1.46.2 · 1 row entry · 18 columns
The table for creating and configuring the ring entries. Each entry 
has information about one ring in the switch.
extremeErpsRingEntry entry .1.3.6.1.4.1.1916.1.46.2.1
The ring table entry, each entry in this table contains the attributes
which define a ring.
Indexes
extremeErpsRingName
Column Syntax OID
extremeErpsRingName
The ERPS domain name.
OctetString
Constraints:
range: 1-32
.1.3.6.1.4.1.1916.1.46.2.1.1
extremeErpsRingVlanId
This object identifies the dedicated VLAN Id used by a ring for its
R-APS messages communication.

It is recommended that the,
* R-APS VLANs should be used only for ring R-APS message
communicati…
Q-BRIDGE-MIBVlanIdr/w
Textual Convention: Q-BRIDGE-MIBVlanId Integer32
Type Constraints:
range: 1..4094
.1.3.6.1.4.1.1916.1.46.2.1.2
extremeErpsRingEast
First port of the two ring ports participating in the ring. Any
interface with valid interface ID can be configured as a ring port.
IF-MIBInterfaceIndexr/w
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
.1.3.6.1.4.1.1916.1.46.2.1.3
extremeErpsRingWest
Second port of the two ring ports participating in the ring. Any
interface with valid interface ID can be configured as a ring port.
On the interconnected node of a sub-ring, this port should be
configured as zero.
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.1916.1.46.2.1.4
extremeErpsRingRplPort
This object identifies the RPL port of the ring.

Valid values for this object are '0', 'IfIndex of extremeErpsRingEast' and
'IfIndex of extremeErpsRingWest'.

When a port is configured as…
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.1916.1.46.2.1.5
extremeErpsRingPortBlockingOnVcRecovery
This object is applicable for the interconnected nodes of a sub-ring.
This configuration helps to avoid the possibility of temporary loops
getting formed in the sub-ring during the virtual channel recovery.
This objec…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.1916.1.46.2.1.6
extremeErpsRingNodeType
This object identifies the node state of this ring node.
If extremeErpsRingRplPort is configured for a ring node, then that ring
node becomes 'rplOwner', otherwise the node remains as 'nonRplOwner'.
Enumeration
Enumerated Values:
1rplOwner
2nonRplOwner
3interConnectionNode
.1.3.6.1.4.1.1916.1.46.2.1.7
extremeErpsRingOperatingMode
This object identifies whether the ring is operating in revertive or
nonRevertive manner.
In revertive mode of operation, once the failed link recovers, the data
path will be switched back from protection path to workin…
Enumerationr/w
Enumerated Values:
1revertive
2nonRevertive
.1.3.6.1.4.1.1916.1.46.2.1.8
extremeErpsRingMonitorMechanism
This object indicates the type of monitoring mechanism used for
detecting faults of the ring link.

Currently 'cfm' is supported as monitoring mechanism. For 'cfm'
monitoring mechanism to monitor the ri…
RingMonitorMechanismType
Textual Convention: RingMonitorMechanismType Enumeration
Type Values:
1cfm
.1.3.6.1.4.1.1916.1.46.2.1.9
extremeErpsRingEastStatus
This object indicates ring port1's current status updated by
ERPS control process of this ring.
If the status is blocked then:
- Data traffic will be blocked on this port.
- R-APS messages received on this por…
Enumeration
Enumerated Values:
1blocked
2unblocked
.1.3.6.1.4.1.1916.1.46.2.1.10
extremeErpsRingWestStatus
This object indicates ring port2's current status updated by
ERPS control process of this ring.
If the status is blocked then:
- Data traffic will be blocked on this port.
- R-APS messages received on this port…
Enumeration
Enumerated Values:
1blocked
2unblocked
.1.3.6.1.4.1.1916.1.46.2.1.11
extremeErpsRingSemState
This object gives the node state as per the G.8032 state event
machine. When ring Row status is not active or when ERPS is disabled
in the virtual context, this object will show 'disabled(0)' status.
Enumeration
Enumerated Values:
0disabled
1idle
2protection
3manualswitch
4forcedswitch
5pending
.1.3.6.1.4.1.1916.1.46.2.1.12
extremeErpsRingNodeStatus
General attributes giving the current status of the ring by specifying the
events/status currently present.

signalFailOnEast(0) - Signal-failure on Ring Port 1
signalFailOnWest(1) - …
Bits
Enumerated Values:
0signalFailOnEast
1signalFailOnWest
2remoteSignalFailOnEast
3remoteSignalFailOnWest
4rplBlocked
5waitToRestoreTimerRunning
6holdTimerRunning
7guardTimerRunning
.1.3.6.1.4.1.1916.1.46.2.1.13
extremeErpsRingRplNeighbourPort
This object identifies the RPL Neighbour port of the ring .

Valid values for this object are '0', 'IfIndex of extremeErpsRingEast' and
'IfIndex of extremeErpsRingWest'.

When a port is con…
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.1916.1.46.2.1.14
extremeErpsRingProtectionType
This object specifies the type of protection being provided by this
ring instance. The following two protection switching types are
possible:
portBased - Port Based Protection
This ring applies th…
Enumeration
Enumerated Values:
1portBased
2serviceBased
.1.3.6.1.4.1.1916.1.46.2.1.15
extremeRingCfmGroup1
Connectivity Fault Management group 1
OctetStringr/w
Constraints:
range: 0-255
.1.3.6.1.4.1.1916.1.46.2.1.16
extremeRingCfmGroup2
Connectivity Fault Management group 2
OctetStringr/w
Constraints:
range: 0-255
.1.3.6.1.4.1.1916.1.46.2.1.17
extremeErpsRingCfmRowStatus
The status of this entry as per standard RowStatus conventions.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.1916.1.46.2.1.18
.1.3.6.1.4.1.1916.1.46.4 · 1 row entry · 14 columns
This table contains statistics information for each of the ring
present in the system. Entries in this table are created 
implicitly by the creation of entries in the extreneErpsRingTable.
extremeErpsRingStatsEntry entry .1.3.6.1.4.1.1916.1.46.4.1
There is one entry in this table for each entry in the extremeErpsRingTable.
Each entry contains the statistics for both ring ports. For a sub-ring
in an interconnected node, Port 2 statistics represent the statistics …
Indexes
extremeErpsRingName
Column Syntax OID
extremeErpsRingEastRapsPduSentCount
This object indicates the number of valid R-APS PDUs sent on the
extremeErpsRingEast of the ring. R-APS PDUs include all types like R-APS(SF),
R-APS(NR) & R-APS (NR, RB).
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.1916.1.46.4.1.1
extremeErpsRingWestRapsPduSentCount
This object indicates the number of valid R-APS PDUs sent on the
extremeErpsRingWest of the ring. R-APS PDUs include all types like
R-APS(SF), R-APS(NR) & R-APS (NR, RB).
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.1916.1.46.4.1.2
extremeErpsRingEastRapsPduRcvdCount
This object indicates the number of valid R-APS PDUs received on the
extremeErpsRingEast of the ring. R-APS PDUs include all types like
R-APS(SF), R-APS(NR) & R-APS (NR, RB).
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.1916.1.46.4.1.3
extremeErpsRingWestRapsPduRcvdCount
This object indicates the number of valid R-APS PDUs received on the
extremeErpsRingWest of the ring. R-APS PDUs include all types like R-APS(SF),
R-APS(NR) & R-APS (NR, RB).
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.1916.1.46.4.1.4
extremeErpsRingEastRapsPduDiscardCount
This object indicates the number of R-APS PDUs discarded on the
extremeErpsRingEast of the ring. R-APS PDUs include all types like R-APS(SF),
R-APS(NR) & R-APS (NR, RB). R-APS PDUs with invalid RAPS header
information…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.1916.1.46.4.1.5
extremeErpsRingWestRapsPduDiscardCount
This object indicates the number of R-APS PDUs discarded on the
extremeErpsRingWest of the ring. R-APS PDUs include all types like R-APS(SF),
R-APS(NR) & R-APS (NR, RB). R-APS PDUs with invalid RAPS header
information…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.1916.1.46.4.1.6
extremeErpsRingEastBlockedCount
This object indicates the number times the extremeErpsRingEast is blocked.
A port might be blocked because of local failure, or because of link
configured as RPL, or if Force/Manual switch is configured
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.1916.1.46.4.1.7
extremeErpsRingWestBlockedCount
This object indicates the number times the extremeErpsRingWest is blocked.
A port might be blocked because of local failure, or because of link
configured as RPL, or if Force/Manual switch is configured
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.1916.1.46.4.1.8
extremeErpsRingEastUnblockedCount
This object indicates the number times the extremeErpsRingEast is unblocked.
A port might be unblocked because of recovery from local failure, or
if the link is configured as RPL link and there is any other failure
in …
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.1916.1.46.4.1.9
extremeErpsRingWestUnblockedCount
This object indicates the number times the extremeErpsRingWest is unblocked.
A port might be unblocked because of recovery from local failure, or
if the link is configured as RPL link and there is any other failure
in …
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.1916.1.46.4.1.10
extremeErpsRingEastFailedCount
This object indicates the number of times the extremeErpsRingEast failed
because of local SF condition.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.1916.1.46.4.1.11
extremeErpsRingWestFailedCount
This object indicates the number of times the extremeErpsRingWest failed
because of local SF condition.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.1916.1.46.4.1.12
extremeErpsRingEastRecoveredCount
This object indicates the number of times the extremeErpsRingEast recovered
from a failure (local clear SF condition).
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.1916.1.46.4.1.13
extremeErpsRingWestRecoveredCount
This object indicates the number of times the extremeErpsRingWest recovered
from a failure (local clear SF condition).
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.1916.1.46.4.1.14