ENTERASYS-MULTI-AUTH-MIB Table View

A table of properties per authentication type.

etsysMultiAuthTypePropertiesEntry row .1.3.6.1.4.1.5624.1.2.46.1.1.8.1

An entry containing per authentication type properties.

Indexes

etsysMultiAuthType

Column	Syntax	OID
etsysMultiAuthType The authentication type the entry properties pertain to.	EtsysMultiAuthTypes Type Values: 1 ieee8021x 2 pwa 3 macAuth 4 cep 5 radiusSnooping 6 autoTracking 7 quarantineAgent	.1.3.6.1.4.1.5624.1.2.46.1.1.8.1.1
etsysMultiAuthSessionTimeout The maximum number of seconds an authenticated session may last before termination of the session. A value of zero indicates that no session timeout will be applied. This value MAY be superseded by a session timeout …	secondsUnsigned32r/w Constraints: range: 0-172800	.1.3.6.1.4.1.5624.1.2.46.1.1.8.1.2
etsysMultiAuthIdleTimeout The maximum number of consecutive seconds an authenticated session may be idle before termination of the session. A value of zero indicates that no idle timeout will be applied. This value MAY be superseded by a idle…	secondsUnsigned32r/w Constraints: range: 0-172800	.1.3.6.1.4.1.5624.1.2.46.1.1.8.1.3
etsysMultiAuthCurrentNumUsers The current number of users the are actively authenticated or have authentications in progress for this authentication type in the system.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.46.1.1.8.1.4

A table of per port information and configuration for user
authentication.

etsysMultiAuthPortEntry row .1.3.6.1.4.1.5624.1.2.46.1.2.1.1

An entry containing per port authentication data.
Only interfaces that are able to authenticate users are
represented in this table.

Indexes

IF-MIBifIndex

Column	Syntax	OID
etsysMultiAuthPortMode This object specifies the authorization mode to use for packets received on this interface. A value of forceUnauthorized(1) indicates that the interface is always unauthenticated. A va…	Enumerationr/w Enumerated Values: 1 forceUnauthorized 2 forceAuthorized 3 authOptional 4 authRequired	.1.3.6.1.4.1.5624.1.2.46.1.2.1.1.1
etsysMultiAuthPortMaxNumUsers The maximum number of users that can be actively authenticated or have authentications in progress at one time on this interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.46.1.2.1.1.2
etsysMultiAuthPortNumUsersAllowed The user configured number of users that can be actively authenticated or have authentications in progress at one time on this interface. This object has a default value equal to the value of etsysMultiAuthPortMaxNumU…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.46.1.2.1.1.3
etsysMultiAuthPortCurrentNumUsers The current number of users that are actively authenticated or have authentications in progress at one time on this interface. By definition this value can not exceed the value specified by etsysMultiAuthPortMaxNumUser…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.46.1.2.1.1.4
etsysMultiAuthPortClearUsers Setting this object to a value of true(1) will cause all users that are currently authenticated or that have authentications in progress on this interface to become unauthenticated. This will cause any such entries wi…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.5624.1.2.46.1.2.1.1.5
etsysMultiAuthPortTrapEnable This object allows for the enabling or disabling of each trap on a per interface basis. Setting a given bit to a value of 1 allows traps of that type to be sent for events on that interface. Setting a given bit to a v…	Bitsr/w Enumerated Values: 0 authSuccessTrap 1 authFailedTrap 2 authTerminatedTrap 3 maxNumUsersReachedTrap	.1.3.6.1.4.1.5624.1.2.46.1.2.1.1.6

A table of per port, per authentication type information.

etsysMultiAuthPortTypeEntry row .1.3.6.1.4.1.5624.1.2.46.1.2.2.1

An entry containing per port, per authentication type data.
Only interfaces that are able to authenticate users are
represented in this table.

Indexes

IF-MIBifIndex etsysMultiAuthType

Column	Syntax	OID
etsysMultiAuthPortTypeCurrentNumUsers The current number of users the are actively authenticated or have authentications in progress for this authentication type on the specified port.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.46.1.2.2.1.1

A table of station configuration on specific interfaces.

etsysMultiAuthStationEntry row .1.3.6.1.4.1.5624.1.2.46.1.3.1.1

An entry containing authentication information on a per station,
per port basis. Only interfaces that are able to authenticate
users are represented in this table.

Indexes

etsysMultiAuthStationAddrType etsysMultiAuthStationAddr IF-MIBifIndex

Column	Syntax	OID
etsysMultiAuthStationAddrType The type of station represented by etsysMultiAuthStationAddr.	ENTERASYS-UPN-TC-MIBStationAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 mac 16 dns	.1.3.6.1.4.1.5624.1.2.46.1.3.1.1.1
etsysMultiAuthStationAddr The station address for the authenticated user.	ENTERASYS-UPN-TC-MIBStationAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.5624.1.2.46.1.3.1.1.2
etsysMultiAuthStationClearUsers Setting this object to a value of true(1) will cause any users with the specified station address that are currently authenticated or that have authentications in progress to become unauthenticated. This will cause a…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.5624.1.2.46.1.3.1.1.3

A table of session information and configuration for user
authentication.  Entries in this table represent users 
in various stages of authentication.  Entries that do
not have a etsysMultiAuthSessionStationAuthStatus value
of authSuccess(1) or authInProgress(3) MAY be removed
by the agent as required in order to free resources for
new user authentications.

etsysMultiAuthSessionStationEntry row .1.3.6.1.4.1.5624.1.2.46.1.4.1.1

An entry containing authentication information on a per station,
per port, per authentication agent type basis. Only interfaces
that are able to authenticate users are represented in this table.

Indexes

etsysMultiAuthStationAddrType etsysMultiAuthStationAddr IF-MIBifIndex etsysMultiAuthSessionAgentType

Column	Syntax	OID
etsysMultiAuthSessionAgentType The type of authentication agent for this session.	EtsysMultiAuthTypes Type Values: 1 ieee8021x 2 pwa 3 macAuth 4 cep 5 radiusSnooping 6 autoTracking 7 quarantineAgent	.1.3.6.1.4.1.5624.1.2.46.1.4.1.1.1
etsysMultiAuthSessionStationAuthStatus The status of authentication for this session.	EtsysMultiAuthStatus Type Values: 1 authSuccess 2 authFailed 3 authInProgress 4 authServerTimeout 5 authTerminated	.1.3.6.1.4.1.5624.1.2.46.1.4.1.1.2
etsysMultiAuthSessionAuthAttemptTime The value of sysUpTime when this session last attempted authorization. For entries that have a value of authInProgress(3) for etsysMultiAuthSessionStationAuthStatus this object MAY return a value of zero.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.5624.1.2.46.1.4.1.1.3
etsysMultiAuthSessionAuthServerType The type of authentication server used to authenticate this session. A value of radius(1) indicates that a RADIUS request and response were attempted in order to authenticate the session. A value of local(2) indicates …	Enumeration Enumerated Values: 1 radius 2 local	.1.3.6.1.4.1.5624.1.2.46.1.4.1.1.4
etsysMultiAuthSessionAuthServerAddrType The type of data returned by etsysMultiAuthSessionAuthServerAddr. If the etsysMultiAuthSessionAuthServerType leaf for this entry has a value of local(2) then this object MUST return a a value of unknown(0).	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.5624.1.2.46.1.4.1.1.5
etsysMultiAuthSessionAuthServerAddr The network address of the authentication server for this session. If the etsysMultiAuthSessionAuthServerType leaf for this entry has a value of local(2) then this object MUST return a zero length string.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.5624.1.2.46.1.4.1.1.6
etsysMultiAuthSessionPolicyIndex The Policy Profile Index returned from the authentication server for this session. The value of zero indicates that no policy will be applied for this session. If the etsysMultiAuthSessionStationAuthS…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.5624.1.2.46.1.4.1.1.7
etsysMultiAuthSessionIsApplied This object indicates whether this entry and the policy index contained within it are actively being applied to traffic matching the interface and station address of this entry. A value of true(1) indicates that this e…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.5624.1.2.46.1.4.1.1.8
etsysMultiAuthSessionTerminationTime The local date and time that the session was terminated. If the session is not in the authTerminated(5) state this object MUST return '00000000'H.	OctetString Constraints: range: 8-8	.1.3.6.1.4.1.5624.1.2.46.1.4.1.1.9
etsysMultiAuthSessionSessionTimeout The maximum number of seconds this session may last before automatic termination. A value of zero indicates that no session timeout will be applied. This value MAY be provided by the etsysMultiAuthSessionTimeout obje…	secondsUnsigned32 Constraints: range: 0-172800	.1.3.6.1.4.1.5624.1.2.46.1.4.1.1.10
etsysMultiAuthSessionIdleTimeout The maximum number of consecutive seconds this session may be idle before automatic termination. A value of zero indicates that no idle timeout will be applied. This value MAY be provided by the etsysMultiAuthIdleTi…	secondsUnsigned32 Constraints: range: 0-172800	.1.3.6.1.4.1.5624.1.2.46.1.4.1.1.11
etsysMultiAuthSessionDuration The length of this session in seconds. This object MAY return zero for a session in any state other than authSuccess(1).	secondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.46.1.4.1.1.12
etsysMultiAuthSessionIdleTime The number of consecutive seconds this session has been idle. This object MAY return zero for a session in any state other than authSuccess(1).	secondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.46.1.4.1.1.13
etsysMultiAuthSessionVlanTunnelAttribute The VLAN Tunnel Attribute (Tunnel-Group-ID) returned from the authentication server for this session. This value is interpreted as the 12 bit VLAN identifier to be applied to traffic from the session enti…	Integer32 Constraints: range: 0-4095	.1.3.6.1.4.1.5624.1.2.46.1.4.1.1.14
etsysMultiAuthSessionClear Setting this object to a value of true(1) will cause the specified table entry with the specified station address, ifIndex and agent type that are currently authenticated or that have authentications in progress to be…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.5624.1.2.46.1.4.1.1.15

A table of session information and configuration for user
authentication.  This table represents the information 
specified in the etsysMultiAuthSessionStationTable with 
alternate indexing for faster lookups of data on per port
basis.

etsysMultiAuthSessionPortEntry row .1.3.6.1.4.1.5624.1.2.46.1.4.2.1

An entry containing authentication information on a per port,
per station, per authentication agent type basis. Only interfaces
that are able to authenticate users are represented in this table.

Indexes

IF-MIBifIndex etsysMultiAuthStationAddrType etsysMultiAuthStationAddr etsysMultiAuthSessionAgentType

Column	Syntax	OID
etsysMultiAuthSessionPortAuthStatus The status of authentication for this session.	EtsysMultiAuthStatus Type Values: 1 authSuccess 2 authFailed 3 authInProgress 4 authServerTimeout 5 authTerminated	.1.3.6.1.4.1.5624.1.2.46.1.4.2.1.1

A table of per module information for user authentication.

etsysMultiAuthModuleEntry row .1.3.6.1.4.1.5624.1.2.46.1.5.1.1

An entry containing per module authentication data.
Only physical indexes with a entPhysicalClass of module(9)
are represented in this table. Furthermore, each entity
represented in this table must have authentication …

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
etsysMultiAuthModuleMaxNumUsers The maximum number of users that can be actively authenticated or have authentications in progress at one time on the specified module.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.46.1.5.1.1.1
etsysMultiAuthModuleCurrentNumUsers The current number of users that are actively authenticated or have authentications in progress at one time on the specified module. By definition this value can not exceed the value specified by etsysMultiAuthModuleMa…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.46.1.5.1.1.2

A table of per station and port user counter data.

etsysMultiAuthCounterEntry row .1.3.6.1.4.1.5624.1.2.46.1.6.1.1

An entry containing user counter data.

Indexes

IF-MIBifIndex etsysMultiAuthStationAddrType etsysMultiAuthStationAddr

Column	Syntax	OID
etsysMultiAuthCounterInboundBytes The number of bytes of user data received on this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5624.1.2.46.1.6.1.1.1
etsysMultiAuthCounterInboundPackets The number of packets of user data received on this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5624.1.2.46.1.6.1.1.2
etsysMultiAuthCounterOutboundBytes The number of bytes of user data transmitted on this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5624.1.2.46.1.6.1.1.3
etsysMultiAuthCounterOutboundPackets The number of packets of user data transmitted on this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5624.1.2.46.1.6.1.1.4