ENTERASYS-MULTI-AUTH-MIB
This MIB module defines a portion of the SNMP MIB under
the Enterasys Networks enterprise OID pertaining to
configuration of multiple authentication mechanisms
to be run simultaneously on a device.
- Source file
ENTERASYS-MULTI-AUTH-MIB- Last revised
- Identity
etsysMultiAuthMIB- Base OID
1.3.6.1.4.1.5624.1.2.46
Imported Objects
| ENTERASYS-MIB-NAMES | etsysModules |
| ENTERASYS-UPN-TC-MIB | StationAddress StationAddressType |
| ENTITY-MIB | entPhysicalIndex |
| IF-MIB | ifIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| P-BRIDGE-MIB | EnabledStatus |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter64 Gauge32 Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | DateAndTime TEXTUAL-CONVENTION (no object page) TimeStamp TruthValue |
Net-SNMP examples using the enterasys MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'ENTERASYS-MULTI-AUTH-MIB' -M '/opt/observium/mibs/enterasys:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ENTERASYS-MULTI-AUTH-MIB::etsysMultiAuthMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENTERASYS-MULTI-AUTH-MIB' -M '/opt/observium/mibs/enterasys:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENTERASYS-MULTI-AUTH-MIB::etsysMultiAuthMIB'
Objects (77)
Showing 77 of 77 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.5624.1.2.46 |
||
.1.3.6.1.4.1.5624.1.2.46.1 |
||
.1.3.6.1.4.1.5624.1.2.46.1.0 |
||
.1.3.6.1.4.1.5624.1.2.46.1.1 |
||
|
Bits
|
.1.3.6.1.4.1.5624.1.2.46.1.1.1 |
|
.1.3.6.1.4.1.5624.1.2.46.1.1.10 |
||
.1.3.6.1.4.1.5624.1.2.46.1.1.11 |
||
|
Enumeration
|
.1.3.6.1.4.1.5624.1.2.46.1.1.12 |
|
.1.3.6.1.4.1.5624.1.2.46.1.1.2 |
||
.1.3.6.1.4.1.5624.1.2.46.1.1.3 |
||
|
Enumeration
|
.1.3.6.1.4.1.5624.1.2.46.1.1.4 |
|
.1.3.6.1.4.1.5624.1.2.46.1.1.5 |
||
.1.3.6.1.4.1.5624.1.2.46.1.1.6 |
||
.1.3.6.1.4.1.5624.1.2.46.1.1.7 |
||
.1.3.6.1.4.1.5624.1.2.46.1.1.8 |
||
.1.3.6.1.4.1.5624.1.2.46.1.1.8.1 |
||
.1.3.6.1.4.1.5624.1.2.46.1.1.8.1.1 |
||
|
secondsUnsigned32
|
.1.3.6.1.4.1.5624.1.2.46.1.1.8.1.2 |
|
|
secondsUnsigned32
|
.1.3.6.1.4.1.5624.1.2.46.1.1.8.1.3 |
|
.1.3.6.1.4.1.5624.1.2.46.1.1.8.1.4 |
||
.1.3.6.1.4.1.5624.1.2.46.1.1.9 |
||
.1.3.6.1.4.1.5624.1.2.46.1.2 |
||
.1.3.6.1.4.1.5624.1.2.46.1.2.1 |
||
.1.3.6.1.4.1.5624.1.2.46.1.2.1.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.5624.1.2.46.1.2.1.1.1 |
|
.1.3.6.1.4.1.5624.1.2.46.1.2.1.1.2 |
||
.1.3.6.1.4.1.5624.1.2.46.1.2.1.1.3 |
||
.1.3.6.1.4.1.5624.1.2.46.1.2.1.1.4 |
||
.1.3.6.1.4.1.5624.1.2.46.1.2.1.1.5 |
||
|
Bits
|
.1.3.6.1.4.1.5624.1.2.46.1.2.1.1.6 |
|
.1.3.6.1.4.1.5624.1.2.46.1.2.2 |
||
.1.3.6.1.4.1.5624.1.2.46.1.2.2.1 |
||
.1.3.6.1.4.1.5624.1.2.46.1.2.2.1.1 |
||
.1.3.6.1.4.1.5624.1.2.46.1.3 |
||
.1.3.6.1.4.1.5624.1.2.46.1.3.1 |
||
.1.3.6.1.4.1.5624.1.2.46.1.3.1.1 |
||
.1.3.6.1.4.1.5624.1.2.46.1.3.1.1.1 |
||
.1.3.6.1.4.1.5624.1.2.46.1.3.1.1.2 |
||
.1.3.6.1.4.1.5624.1.2.46.1.3.1.1.3 |
||
.1.3.6.1.4.1.5624.1.2.46.1.4 |
||
.1.3.6.1.4.1.5624.1.2.46.1.4.1 |
||
.1.3.6.1.4.1.5624.1.2.46.1.4.1.1 |
||
.1.3.6.1.4.1.5624.1.2.46.1.4.1.1.1 |
||
|
secondsUnsigned32
|
.1.3.6.1.4.1.5624.1.2.46.1.4.1.1.10 |
|
|
secondsUnsigned32
|
.1.3.6.1.4.1.5624.1.2.46.1.4.1.1.11 |
|
|
secondsSNMPv2-SMIGauge32
|
.1.3.6.1.4.1.5624.1.2.46.1.4.1.1.12 |
|
|
secondsSNMPv2-SMIGauge32
|
.1.3.6.1.4.1.5624.1.2.46.1.4.1.1.13 |
|
|
Integer32
|
.1.3.6.1.4.1.5624.1.2.46.1.4.1.1.14 |
|
.1.3.6.1.4.1.5624.1.2.46.1.4.1.1.15 |
||
.1.3.6.1.4.1.5624.1.2.46.1.4.1.1.2 |
||
.1.3.6.1.4.1.5624.1.2.46.1.4.1.1.3 |
||
|
Enumeration
|
.1.3.6.1.4.1.5624.1.2.46.1.4.1.1.4 |
|
.1.3.6.1.4.1.5624.1.2.46.1.4.1.1.5 |
||
.1.3.6.1.4.1.5624.1.2.46.1.4.1.1.6 |
||
|
Integer32
|
.1.3.6.1.4.1.5624.1.2.46.1.4.1.1.7 |
|
.1.3.6.1.4.1.5624.1.2.46.1.4.1.1.8 |
||
|
OctetString
|
.1.3.6.1.4.1.5624.1.2.46.1.4.1.1.9 |
|
.1.3.6.1.4.1.5624.1.2.46.1.4.2 |
||
.1.3.6.1.4.1.5624.1.2.46.1.4.2.1 |
||
.1.3.6.1.4.1.5624.1.2.46.1.4.2.1.1 |
||
.1.3.6.1.4.1.5624.1.2.46.1.5 |
||
.1.3.6.1.4.1.5624.1.2.46.1.5.1 |
||
.1.3.6.1.4.1.5624.1.2.46.1.5.1.1 |
||
.1.3.6.1.4.1.5624.1.2.46.1.5.1.1.1 |
||
.1.3.6.1.4.1.5624.1.2.46.1.5.1.1.2 |
||
.1.3.6.1.4.1.5624.1.2.46.1.5.2 |
||
.1.3.6.1.4.1.5624.1.2.46.1.6 |
||
.1.3.6.1.4.1.5624.1.2.46.1.6.1 |
||
.1.3.6.1.4.1.5624.1.2.46.1.6.1.1 |
||
.1.3.6.1.4.1.5624.1.2.46.1.6.1.1.1 |
||
.1.3.6.1.4.1.5624.1.2.46.1.6.1.1.2 |
||
.1.3.6.1.4.1.5624.1.2.46.1.6.1.1.3 |
||
.1.3.6.1.4.1.5624.1.2.46.1.6.1.1.4 |
||
.1.3.6.1.4.1.5624.1.2.46.1.6.2 |
||
.1.3.6.1.4.1.5624.1.2.46.2 |
||
.1.3.6.1.4.1.5624.1.2.46.2.1 |
||
.1.3.6.1.4.1.5624.1.2.46.2.2 |
Dependencies (15) 9 direct · 6 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- ENTERASYS-MIB-NAMESenterasys
- SNMPv2-TCrfc
- ENTERASYS-UPN-TC-MIBenterasys
- IANA-ENTITY-MIBrfc
- SNMPv2-CONFrfc
- SNMP-FRAMEWORK-MIBrfc
- UUID-TC-MIBrfc
- ENTITY-MIBrfc
- IANAifType-MIBrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- INET-ADDRESS-MIBrfc
- BRIDGE-MIBrfc
- P-BRIDGE-MIBrfc
- ENTERASYS-MULTI-AUTH-MIBenterasysselected
Type Definitions (3)
| Enumeration |
authSuccess(1)authFailed(2)authInProgress(3)authServerTimeout(4)authTerminated(5) |
|
| OctetString |
range: 0..32 |
|
| Enumeration |
ieee8021x(1)pwa(2)macAuth(3)cep(4)radiusSnooping(5)autoTracking(6)quarantineAgent(7) |
Conformance Groups (21)
Compliance Statements (10)
OID
.1.3.6.1.4.1.5624.1.2.46.2.2.1This compliance statement has been deprecated in favor of
the expanded group defined by etsysMultiAuthCompliance2.
the expanded group defined by etsysMultiAuthCompliance2.
Required groups
| mandatory | etsysMultiAuthSystemGroup | |
| mandatory | etsysMultiAuthPortBaseGroup | |
| mandatory | etsysMultiAuthStationGroup | |
| mandatory | etsysMultiAuthSessionGroup | |
| optional | etsysMultiAuthPortTrapGroup |
This group is mandatory for all devices that support per interface notifications for Multiple Authentication. |
| optional | etsysMultiAuthNotificationPortGroup |
This group is mandatory for all devices that support per interface notifications for Multiple Authentication. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| etsysMultiAuthSystemAdminPrecedence | readonly | Write access is not required. | |
| etsysMultiAuthPortNumUsersAllowed | readonly | Write access is not required. | |
| etsysMultiAuthPortClearUsers | readonly | Write access is not required. | |
| etsysMultiAuthStationClearUsers | readonly | Write access is not required. |
OID
.1.3.6.1.4.1.5624.1.2.46.2.2.2This compliance statement has been deprecated in favor of
the expanded group defined by etsysMultiAuthCompliance3.
the expanded group defined by etsysMultiAuthCompliance3.
Required groups
| mandatory | etsysMultiAuthSystemGroup | |
| mandatory | etsysMultiAuthPortBaseGroup | |
| mandatory | etsysMultiAuthStationGroup | |
| mandatory | etsysMultiAuthSessionGroup | |
| optional | etsysMultiAuthPortTrapGroup |
This group is mandatory for all devices that support per interface notifications for Multiple Authentication. |
| optional | etsysMultiAuthNotificationPortGroup |
This group is mandatory for all devices that support per interface notifications for Multiple Authentication. |
| optional | etsysMultiAuthModuleGroup |
This group is mandatory for all devices that support module authentication resources that are not shared between modules. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| etsysMultiAuthSystemAdminPrecedence | readonly | Write access is not required. | |
| etsysMultiAuthPortNumUsersAllowed | readonly | Write access is not required. | |
| etsysMultiAuthPortClearUsers | readonly | Write access is not required. | |
| etsysMultiAuthStationClearUsers | readonly | Write access is not required. |
OID
.1.3.6.1.4.1.5624.1.2.46.2.2.3This compliance statement has been deprecated in favor of
the expanded group defined by etsysMultiAuthCompliance4.
the expanded group defined by etsysMultiAuthCompliance4.
Required groups
| mandatory | etsysMultiAuthSystemGroup | |
| mandatory | etsysMultiAuthPortBaseGroup | |
| mandatory | etsysMultiAuthStationGroup | |
| mandatory | etsysMultiAuthSessionGroup2 | |
| optional | etsysMultiAuthPortTrapGroup |
This group is mandatory for all devices that support per interface notifications for Multiple Authentication. |
| optional | etsysMultiAuthNotificationPortGroup |
This group is mandatory for all devices that support per interface notifications for Multiple Authentication. |
| optional | etsysMultiAuthModuleGroup |
This group is mandatory for all devices that support module authentication resources that are not shared between modules. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| etsysMultiAuthSystemAdminPrecedence | readonly | Write access is not required. | |
| etsysMultiAuthPortNumUsersAllowed | readonly | Write access is not required. | |
| etsysMultiAuthPortClearUsers | readonly | Write access is not required. | |
| etsysMultiAuthStationClearUsers | readonly | Write access is not required. |
OID
.1.3.6.1.4.1.5624.1.2.46.2.2.4The compliance statement for devices that support timing out
of Multiple Authentication sessions.
of Multiple Authentication sessions.
Required groups
| optional | etsysMultiAuthTimeoutGroup |
This group is mandatory for all devices that support timing out Multiple Authentication sessions. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| etsysMultiAuthSessionTimeout | readonly | Write access is not required. | |
| etsysMultiAuthIdleTimeout | readonly | Write access is not required. |
OID
.1.3.6.1.4.1.5624.1.2.46.2.2.5The compliance statement for all devices that support counting
the number of current users on a per authentication type
basis.
the number of current users on a per authentication type
basis.
Required groups
| optional | etsysMultiAuthCurrentNumUsersGroup |
This group is mandatory for all devices that support support counting the number of current users on a per authentication type basis. |
OID
.1.3.6.1.4.1.5624.1.2.46.2.2.6This compliance statement has been deprecated in favor of
the expanded group defined by etsysMultiAuthCompliance5.
the expanded group defined by etsysMultiAuthCompliance5.
Required groups
| mandatory | etsysMultiAuthSystemGroup | |
| mandatory | etsysMultiAuthPortBaseGroup | |
| mandatory | etsysMultiAuthStationGroup | |
| mandatory | etsysMultiAuthSessionGroup2 | |
| optional | etsysMultiAuthPortTrapGroup |
This group is mandatory for all devices that support per interface notifications for Multiple Authentication. |
| optional | etsysMultiAuthNotificationPortGroup |
This group is mandatory for all devices that support per interface notifications for Multiple Authentication. |
| optional | etsysMultiAuthModuleGroup |
This group is mandatory for all devices that support module authentication resources that are not shared between modules. |
| optional | etsysMultiAuthModuleTrapGroup |
This group is mandatory for all devices that support per module notifications for Multiple Authentication. |
| optional | etsysMultiAuthNotificationModuleGroup |
This group is mandatory for all devices that support per module notifications for Multiple Authentication. |
| optional | etsysMultiAuthSystemTrapGroup |
This group is mandatory for all devices that support per system notifications for Multiple Authentication. |
| optional | etsysMultiAuthNotificationSystemGroup |
This group is mandatory for all devices that support per system notifications for Multiple Authentication. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| etsysMultiAuthSystemAdminPrecedence | readonly | Write access is not required. | |
| etsysMultiAuthPortNumUsersAllowed | readonly | Write access is not required. | |
| etsysMultiAuthPortClearUsers | readonly | Write access is not required. | |
| etsysMultiAuthStationClearUsers | readonly | Write access is not required. |
OID
.1.3.6.1.4.1.5624.1.2.46.2.2.7The compliance statement for all devices that support 802.1X
RADIUS Tunnel Attributes.
RADIUS Tunnel Attributes.
Required groups
| optional | etsysMultiAuthTunnelAttributeGroup |
This group is mandatory for all devices that support support 802.1X RADIUS Tunnel Attributes. |
OID
.1.3.6.1.4.1.5624.1.2.46.2.2.8The compliance statement for all devices that support
multiple authentication counter collection.
multiple authentication counter collection.
Required groups
| optional | etsysMultiAuthCounterEnableGroup |
This group is mandatory for all devices that support multiple authentication counter collection. |
| optional | etsysMultiAuthInboundCounterGroup |
Support for this group is optional and only applies to objects that wish to support inbound multiple authentication counter collection. |
| optional | etsysMultiAuthOutboundCounterGroup |
Support for this group is optional and only applies to objects that wish to support outbound multiple authentication counter collection. |
OID
.1.3.6.1.4.1.5624.1.2.46.2.2.9The compliance statement for devices that support Multiple
Authentication.
Authentication.
Required groups
| mandatory | etsysMultiAuthSystemGroup2 | |
| mandatory | etsysMultiAuthPortBaseGroup | |
| mandatory | etsysMultiAuthStationGroup | |
| mandatory | etsysMultiAuthSessionGroup3 | |
| optional | etsysMultiAuthPortTrapGroup |
This group is mandatory for all devices that support per interface notifications for Multiple Authentication. |
| optional | etsysMultiAuthNotificationPortGroup |
This group is mandatory for all devices that support per interface notifications for Multiple Authentication. |
| optional | etsysMultiAuthModuleGroup |
This group is mandatory for all devices that support module authentication resources that are not shared between modules. |
| optional | etsysMultiAuthModuleTrapGroup |
This group is mandatory for all devices that support per module notifications for Multiple Authentication. |
| optional | etsysMultiAuthNotificationModuleGroup |
This group is mandatory for all devices that support per module notifications for Multiple Authentication. |
| optional | etsysMultiAuthSystemTrapGroup |
This group is mandatory for all devices that support per system notifications for Multiple Authentication. |
| optional | etsysMultiAuthNotificationSystemGroup |
This group is mandatory for all devices that support per system notifications for Multiple Authentication. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| etsysMultiAuthSystemAdminPrecedence | readonly | Write access is not required. | |
| etsysMultiAuthPortNumUsersAllowed | readonly | Write access is not required. | |
| etsysMultiAuthPortClearUsers | readonly | Write access is not required. | |
| etsysMultiAuthStationClearUsers | readonly | Write access is not required. | |
| etsysMultiAuthSessionsUniquePerPort | readonly | Write access is not required. |
OID
.1.3.6.1.4.1.5624.1.2.46.2.2.10The compliance statement for devices that support Multiple
Authentication.
Authentication.
Required groups
| mandatory | etsysMultiAuthSystemGroup3 | |
| mandatory | etsysMultiAuthPortBaseGroup | |
| mandatory | etsysMultiAuthStationGroup | |
| mandatory | etsysMultiAuthSessionGroup3 | |
| optional | etsysMultiAuthPortTrapGroup |
This group is mandatory for all devices that support per interface notifications for Multiple Authentication. |
| optional | etsysMultiAuthNotificationPortGroup |
This group is mandatory for all devices that support per interface notifications for Multiple Authentication. |
| optional | etsysMultiAuthModuleGroup |
This group is mandatory for all devices that support module authentication resources that are not shared between modules. |
| optional | etsysMultiAuthModuleTrapGroup |
This group is mandatory for all devices that support per module notifications for Multiple Authentication. |
| optional | etsysMultiAuthNotificationModuleGroup |
This group is mandatory for all devices that support per module notifications for Multiple Authentication. |
| optional | etsysMultiAuthSystemTrapGroup |
This group is mandatory for all devices that support per system notifications for Multiple Authentication. |
| optional | etsysMultiAuthNotificationSystemGroup |
This group is mandatory for all devices that support per system notifications for Multiple Authentication. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| etsysMultiAuthSystemAdminPrecedence | readonly | Write access is not required. | |
| etsysMultiAuthPortNumUsersAllowed | readonly | Write access is not required. | |
| etsysMultiAuthPortClearUsers | readonly | Write access is not required. | |
| etsysMultiAuthStationClearUsers | readonly | Write access is not required. | |
| etsysMultiAuthSessionsUniquePerPortOperStatus | readonly | Write access is not required. |
Notifications / Traps (6)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.4.1.5624.1.2.46.1.0.1 |
An etsysMultiAuthSuccess trap signifies that the SNMP entity,
acting in an agent role, has successfully authenticated a station on one of its interfaces. The included objects of etsysMultiAuthStationAddrType and etsysMultiAuthStationAddr uniquely identify the station that has been authenticated. The interface that the station was authenticated on is specified by the ifIndex object, and the type of authentication used is to authenticate the station is specified by the etsysMultiAuthSessionAgentType object. This trap will only be generated on interfaces that are in the authOptional(3) or authRequired(4) state. |
|
.1.3.6.1.4.1.5624.1.2.46.1.0.2 |
An etsysMultiAuthFailed trap signifies that the SNMP entity,
acting in an agent role, has identified a station that attempted and subsequently failed to authenticate on one of its interfaces. The included objects of etsysMultiAuthStationAddrType and etsysMultiAuthStationAddr uniquely identify the station that attempted to authenticate. The interface that the station attempted to authenticate on is specified by the ifIndex object, and the type of authentication attempted is specified by the etsysMultiAuthSessionAgentType object. This trap will only be generated on interfaces that are in the authOptional(3) or authRequired(4) state. |
|
.1.3.6.1.4.1.5624.1.2.46.1.0.3 |
An etsysMultiAuthTerminated trap signifies that the SNMP entity,
acting in an agent role, has terminated the authentication of a station on one of its interfaces. The included objects of etsysMultiAuthStationAddrType and etsysMultiAuthStationAddr uniquely identify the station for which authentication was terminated. The interface that the station was previously authenticated on is specified by the ifIndex object, and the type of authentication that the station was terminated for is specified by the etsysMultiAuthSessionAgentType object. This trap will only be generated on interfaces that are in the authOptional(3) or authRequired(4) state. |
|
.1.3.6.1.4.1.5624.1.2.46.1.0.4 |
An etsysMultiAuthMaxNumUsersReached trap signifies that the SNMP
entity, acting in an agent role, has an interface where subsequent to a successful authentication, the number of current sessions on the interface equals the maximum number of sessions allowed for that interface. The interface that the maximum number of sessions has been reached is specified by the ifIndex object. |
|
.1.3.6.1.4.1.5624.1.2.46.1.0.5 |
An etsysMultiAuthModuleMaxNumUsersReached trap signifies that the
SNMP entity, acting in an agent role, has a module where subsequent to a successful authentication, the number of current sessions on the module equals the maximum number of sessions allowed for that module. The module that the maximum number of sessions has been reached is specified by the entPhysicalIndex object. |
|
.1.3.6.1.4.1.5624.1.2.46.1.0.6 |
An etsysMultiAuthSystemMaxNumUsersReached trap signifies that the
SNMP entity, acting in an agent role, where subsequent to a successful authentication, has the number of current sessions on the system equals the maximum number of sessions allowed for that system, . |