ENTERASYS-FLOW-LIMITING-MIB
This MIB module defines the portion of the SNMP enterprise
MIBs under Enterasys Networks' enterprise OID pertaining to
the Flow Limiting feature.
- Source file
ENTERASYS-FLOW-LIMITING-MIB- Last revised
- Identity
etsysFlowLimitingMIB- Base OID
1.3.6.1.4.1.5624.1.2.43
Imported Objects
| ENTERASYS-MIB-NAMES | etsysModules |
| ENTERASYS-MULTI-AUTH-MIB | etsysMultiAuthStationAddr etsysMultiAuthStationAddrType |
| IF-MIB | ifIndex ifName |
| P-BRIDGE-MIB | EnabledStatus |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Gauge32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) TimeTicks Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION (no object page) TruthValue |
Net-SNMP examples using the enterasys MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'ENTERASYS-FLOW-LIMITING-MIB' -M '/opt/observium/mibs/enterasys:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ENTERASYS-FLOW-LIMITING-MIB::etsysFlowLimitingMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENTERASYS-FLOW-LIMITING-MIB' -M '/opt/observium/mibs/enterasys:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENTERASYS-FLOW-LIMITING-MIB::etsysFlowLimitingMIB'
Objects (52)
Showing 52 of 52 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.5624.1.2.43 |
||
.1.3.6.1.4.1.5624.1.2.43.1 |
||
.1.3.6.1.4.1.5624.1.2.43.1.0 |
||
.1.3.6.1.4.1.5624.1.2.43.1.1 |
||
.1.3.6.1.4.1.5624.1.2.43.1.1.1 |
||
.1.3.6.1.4.1.5624.1.2.43.1.1.2 |
||
.1.3.6.1.4.1.5624.1.2.43.1.1.3 |
||
|
secondsUnsigned32
|
.1.3.6.1.4.1.5624.1.2.43.1.1.4 |
|
.1.3.6.1.4.1.5624.1.2.43.1.1.5 |
||
|
flowsSNMPv2-SMIUnsigned32
|
.1.3.6.1.4.1.5624.1.2.43.1.1.6 |
|
|
flows/secondSNMPv2-SMIUnsigned32
|
.1.3.6.1.4.1.5624.1.2.43.1.1.7 |
|
.1.3.6.1.4.1.5624.1.2.43.1.2 |
||
.1.3.6.1.4.1.5624.1.2.43.1.2.1 |
||
.1.3.6.1.4.1.5624.1.2.43.1.2.1.1 |
||
.1.3.6.1.4.1.5624.1.2.43.1.2.1.1.1 |
||
|
flowsUnsigned32
|
.1.3.6.1.4.1.5624.1.2.43.1.2.1.1.2 |
|
.1.3.6.1.4.1.5624.1.2.43.1.2.1.1.3 |
||
|
flowsUnsigned32
|
.1.3.6.1.4.1.5624.1.2.43.1.2.1.1.4 |
|
.1.3.6.1.4.1.5624.1.2.43.1.2.1.1.5 |
||
|
flows/secondUnsigned32
|
.1.3.6.1.4.1.5624.1.2.43.1.2.1.1.6 |
|
|
flows/secondUnsigned32
|
.1.3.6.1.4.1.5624.1.2.43.1.2.1.1.7 |
|
.1.3.6.1.4.1.5624.1.2.43.1.2.1.1.8 |
||
.1.3.6.1.4.1.5624.1.2.43.1.3 |
||
.1.3.6.1.4.1.5624.1.2.43.1.3.1 |
||
.1.3.6.1.4.1.5624.1.2.43.1.3.1.1 |
||
.1.3.6.1.4.1.5624.1.2.43.1.3.1.1.1 |
||
|
flows/secondSNMPv2-SMIGauge32
|
.1.3.6.1.4.1.5624.1.2.43.1.3.1.1.10 |
|
|
flows/secondSNMPv2-SMIGauge32
|
.1.3.6.1.4.1.5624.1.2.43.1.3.1.1.11 |
|
.1.3.6.1.4.1.5624.1.2.43.1.3.1.1.12 |
||
.1.3.6.1.4.1.5624.1.2.43.1.3.1.1.13 |
||
.1.3.6.1.4.1.5624.1.2.43.1.3.1.1.14 |
||
.1.3.6.1.4.1.5624.1.2.43.1.3.1.1.2 |
||
|
Enumeration
|
.1.3.6.1.4.1.5624.1.2.43.1.3.1.1.3 |
|
|
Enumeration
|
.1.3.6.1.4.1.5624.1.2.43.1.3.1.1.4 |
|
.1.3.6.1.4.1.5624.1.2.43.1.3.1.1.5 |
||
|
flowsSNMPv2-SMIGauge32
|
.1.3.6.1.4.1.5624.1.2.43.1.3.1.1.6 |
|
|
flowsSNMPv2-SMIGauge32
|
.1.3.6.1.4.1.5624.1.2.43.1.3.1.1.7 |
|
.1.3.6.1.4.1.5624.1.2.43.1.3.1.1.8 |
||
.1.3.6.1.4.1.5624.1.2.43.1.3.1.1.9 |
||
.1.3.6.1.4.1.5624.1.2.43.1.4 |
||
.1.3.6.1.4.1.5624.1.2.43.1.4.1 |
||
.1.3.6.1.4.1.5624.1.2.43.1.4.1.1 |
||
.1.3.6.1.4.1.5624.1.2.43.1.4.1.1.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.5624.1.2.43.1.4.1.1.2 |
|
|
Enumeration
|
.1.3.6.1.4.1.5624.1.2.43.1.4.1.1.3 |
|
|
flowsSNMPv2-SMIGauge32
|
.1.3.6.1.4.1.5624.1.2.43.1.4.1.1.4 |
|
|
flowsSNMPv2-SMIGauge32
|
.1.3.6.1.4.1.5624.1.2.43.1.4.1.1.5 |
|
.1.3.6.1.4.1.5624.1.2.43.1.4.1.1.6 |
||
.1.3.6.1.4.1.5624.1.2.43.1.4.1.1.7 |
||
.1.3.6.1.4.1.5624.1.2.43.2 |
||
.1.3.6.1.4.1.5624.1.2.43.2.1 |
||
.1.3.6.1.4.1.5624.1.2.43.2.2 |
Dependencies (16) 7 direct · 9 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- ENTERASYS-MIB-NAMESenterasys
- SNMPv2-TCrfc
- ENTERASYS-UPN-TC-MIBenterasys
- IANA-ENTITY-MIBrfc
- SNMPv2-CONFrfc
- SNMP-FRAMEWORK-MIBrfc
- UUID-TC-MIBrfc
- ENTITY-MIBrfc
- IANAifType-MIBrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- INET-ADDRESS-MIBrfc
- BRIDGE-MIBrfc
- P-BRIDGE-MIBrfc
- ENTERASYS-MULTI-AUTH-MIBenterasys
- ENTERASYS-FLOW-LIMITING-MIBenterasysselected
Type Definitions (3)
| Bits |
generateNotification(0)dropExcessFlows(1)createDiscardFlows(2)disableInterface(3) |
|
| Enumeration |
userPort(1)serverPort(2)aggregatedUserPort(3)interSwitchLink(4)unspecified(5) |
|
| Enumeration |
none(1)l2(2)l3(3)l4(4) |
Conformance Groups (11)
Compliance Statements (4)
OID
.1.3.6.1.4.1.5624.1.2.43.2.2.1The compliance statement for devices that support
Flow Limiting.
Flow Limiting.
Required groups
| mandatory | etsysFlowLimitingSystemGroup | |
| mandatory | etsysFlowLimitingInterfaceGroup | |
| optional | etsysFlowLimitingFlowCountGroup |
This group is REQUIRED for entities that support limiting flow counts on a per interface basis. |
| optional | etsysFlowLimitingFlowCountNotificationGroup |
This group is REQUIRED for entities that support limiting flow counts on a per interface basis. |
| optional | etsysFlowLimitingSetupRateGroup |
This group is REQUIRED for entities that support limiting flow setup rates on a per interface basis. |
| optional | etsysFlowLimitingSetupRateNotificationGroup |
This group is REQUIRED for entities that support limiting flow setup rates on a per interface basis. |
OID
.1.3.6.1.4.1.5624.1.2.43.2.2.2The compliance statement for devices that support
Flow Limiting.
Flow Limiting.
Required groups
| mandatory | etsysFlowLimitingSystemGroup | |
| mandatory | etsysFlowLimitingInterfaceGroupV2 | |
| optional | etsysFlowLimitingFlowCountGroup |
This group is REQUIRED for entities that support limiting flow counts on a per interface basis. |
| optional | etsysFlowLimitingFlowCountNotificationGroup |
This group is REQUIRED for entities that support limiting flow counts on a per interface basis. |
| optional | etsysFlowLimitingSetupRateGroup |
This group is REQUIRED for entities that support limiting flow setup rates on a per interface basis. |
| optional | etsysFlowLimitingSetupRateNotificationGroup |
This group is REQUIRED for entities that support limiting flow setup rates on a per interface basis. |
OID
.1.3.6.1.4.1.5624.1.2.43.2.2.3The compliance statement for devices that support
Flow Limiting.
Flow Limiting.
Required groups
| mandatory | etsysFlowLimitingSystemGroup | |
| mandatory | etsysFlowLimitingInterfaceGroupV2 | |
| optional | etsysFlowLimitingFlowCountGroup |
This group is REQUIRED for entities that support limiting flow counts on a per interface basis. |
| optional | etsysFlowLimitingFlowCountNotificationGroupV2 |
This group is REQUIRED for entities that support limiting flow counts on a per interface basis. |
| optional | etsysFlowLimitingSetupRateGroup |
This group is REQUIRED for entities that support limiting flow setup rates on a per interface basis. |
| optional | etsysFlowLimitingSetupRateNotificationGroupV2 |
This group is REQUIRED for entities that support limiting flow setup rates on a per interface basis. |
OID
.1.3.6.1.4.1.5624.1.2.43.2.2.4The compliance statement for devices that support
per user Flow Limiting.
per user Flow Limiting.
Required groups
| mandatory | etsysFlowLimitingUserGroup | |
| mandatory | etsysFlowLimitingUserNotificationGroup |
Notifications / Traps (10)
| Name | OID | Description |
|---|---|---|
|
etsysFlowlimitingFlowCountActionLimit1
deprecated
|
.1.3.6.1.4.1.5624.1.2.43.1.0.1 |
An etsysFlowlimitingFlowCountActionLimit1 notification
indicates that the number of flows on the interface has exceeded the currently configured limit in the associated etsysFlowLimitingClassFlowCountActionLimit1 for the interface. |
.1.3.6.1.4.1.5624.1.2.43.1.0.10 |
An etsysFlowlimitingFlowCountLimit2User notification
indicates that the number of flows for the user has exceeded the currently configured limit in the associated etsysFlowLimitingClassFlowCountActionLimit2 for the user. |
|
|
etsysFlowlimitingFlowCountActionLimit2
deprecated
|
.1.3.6.1.4.1.5624.1.2.43.1.0.2 |
An etsysFlowlimitingFlowCountActionLimit2 notification
indicates that the number of flows on the interface has exceeded the currently configured limit in the associated etsysFlowLimitingClassFlowCountActionLimit2 for the interface. |
|
etsysFlowLimitingSetupRateNotifyLimit
deprecated
|
.1.3.6.1.4.1.5624.1.2.43.1.0.3 |
An etsysFlowLimitingSetupRateNotifyLimit notification
indicates that the flow setup rate on the interface has exceeded the currently configured limit for generating a notification. |
|
etsysFlowLimitingSetupRateActionLimit
deprecated
|
.1.3.6.1.4.1.5624.1.2.43.1.0.4 |
An etsysFlowLimitingSetupRateExceeded notification
indicates that the flow setup rate on the interface has exceeded the currently configured limit for taking an action. |
.1.3.6.1.4.1.5624.1.2.43.1.0.5 |
An etsysFlowlimitingFlowCountActionLimit1 notification
indicates that the number of flows on the interface has exceeded the currently configured limit in the associated etsysFlowLimitingClassFlowCountActionLimit1 for the interface. |
|
.1.3.6.1.4.1.5624.1.2.43.1.0.6 |
An etsysFlowlimitingFlowCountActionLimit2 notification
indicates that the number of flows on the interface has exceeded the currently configured limit in the associated etsysFlowLimitingClassFlowCountActionLimit2 for the interface. |
|
.1.3.6.1.4.1.5624.1.2.43.1.0.7 |
An etsysFlowLimitingSetupRateNotifyLimit notification
indicates that the flow setup rate on the interface has exceeded the currently configured limit for generating a notification. |
|
.1.3.6.1.4.1.5624.1.2.43.1.0.8 |
An etsysFlowLimitingSetupRateExceeded notification
indicates that the flow setup rate on the interface has exceeded the currently configured limit for taking an action. |
|
.1.3.6.1.4.1.5624.1.2.43.1.0.9 |
An etsysFlowlimitingFlowCountLimit1User notification
indicates that the number of flows for the user has exceeded the currently configured limit in the associated etsysFlowLimitingClassFlowCountActionLimit1 for the user. |