ENLOGIC-PDU-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
35
Rows
35
Columns
273
pduNamePlateTable
table
.1.3.6.1.4.1.38446.1.1.2
·
1 row entry
·
15 columns
Uses the enlogic variant from
Command help
/opt/observium/mibs/enlogic.
Walk pduNamePlateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENLOGIC-PDU-MIB' -M '/opt/observium/mibs/enlogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENLOGIC-PDU-MIB::pduNamePlateTable'
A table of PDU nameplate data
Nameplate data from the PDU being queried. The numbers of entries equals the value of pduNamePlateTableSize.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The index of the PDU nameplate table entry
|
Integer32 | .1.3.6.1.4.1.38446.1.1.2.1.1 |
||||||||||||||
|
A user-defined string identifying the PDU
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.1.2.1.2 |
||||||||||||||
|
A user-defined string identifying the location of PDU
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.1.2.1.3 |
||||||||||||||
|
The type of address format
|
INET-ADDRESS-MIBInetAddressType Type Values:
|
.1.3.6.1.4.1.38446.1.1.2.1.4 |
||||||||||||||
|
The current IP address. A value of 0.0.0.0 indicates an error or an unset option
|
INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255 |
.1.3.6.1.4.1.38446.1.1.2.1.5 |
||||||||||||||
|
The current netmask. A value of 0.0.0.0 indiates an error or an unset option
|
INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255 |
.1.3.6.1.4.1.38446.1.1.2.1.6 |
||||||||||||||
|
The current gateway. A value of 0.0.0.0 indicates an error or an unset option
|
INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255 |
.1.3.6.1.4.1.38446.1.1.2.1.7 |
||||||||||||||
|
The assigned MAC address for the PDU
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.38446.1.1.2.1.8 |
||||||||||||||
|
The difference in hours and minutes from Coordinated Universal
Time(UTC) for the time used in a particular time zone |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.1.2.1.9 |
||||||||||||||
|
The PDU model number
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.1.2.1.10 |
||||||||||||||
|
The PDU serial number
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.1.2.1.11 |
||||||||||||||
|
The date the PDU was manufactured in mm/dd/yyyy format
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.1.2.1.12 |
||||||||||||||
|
The PDU firmware version
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.1.2.1.13 |
||||||||||||||
|
Timestamp of when the PDU firmware was last updated
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.1.2.1.14 |
||||||||||||||
|
The type of Unit, PDU or Inline Meter
|
Enumeration | .1.3.6.1.4.1.38446.1.1.2.1.15 |
pduUnitConfigTable
table.1.3.6.1.4.1.38446.1.2.2
·
1 row entry
·
21 columns
Uses the enlogic variant from
Command help
/opt/observium/mibs/enlogic.
Walk pduUnitConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENLOGIC-PDU-MIB' -M '/opt/observium/mibs/enlogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENLOGIC-PDU-MIB::pduUnitConfigTable'
A table of PDU configuration data
Configuration data from the PDU being queried. The number of entries equals the value of pduUnitTableSize
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
The index of the PDU Unit Config Entry
|
Integer32 | .1.3.6.1.4.1.38446.1.2.2.1.1 |
|
A user-defined string identifying the PDU
|
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.2.2.1.2 |
|
A user-defined string identifying the location of the PDU
|
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.2.2.1.3 |
|
Indicates the intended physical orientation of the oLED display
displayNormal (1) indicates normal orientation. displayReverse (2) indicates upside down orientation |
Enumerationr/w | .1.3.6.1.4.1.38446.1.2.2.1.4 |
|
The amount of time, specified in seconds, between when power
is provided to the PDU and when the PDU start providing basic master power to the outlets |
Unsigned32r/w | .1.3.6.1.4.1.38446.1.2.2.1.5 |
|
The outlet state on device startup; applies to all outlets
unless overridden at the outlet level |
Enumerationr/w | .1.3.6.1.4.1.38446.1.2.2.1.6 |
|
User-defined lower critical unit active power alarm threshold measured in Watts
|
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.38446.1.2.2.1.7 |
|
User-defined lower non-critical (warning) unit active power alarm threshold measured in Watts
|
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.38446.1.2.2.1.8 |
|
User-defined upper critical unit active power alarm threshold measured in Watts
|
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.38446.1.2.2.1.9 |
|
User-defined upper non-critical (warning) unit active power alarm threshold measured in Watts
|
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.38446.1.2.2.1.10 |
|
The hysteresis used for deassertions in Watts
|
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.38446.1.2.2.1.11 |
|
The delay measured in samples before a state is asserted. If the value is zero, then the state is asserted as soon as it is detected; if it is non-zero, say n, then the assertion condition must exist for n+1 consecutive…
|
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.38446.1.2.2.1.12 |
|
A bit string indicating which alarm thresholds are enabled
|
Bitsr/w | .1.3.6.1.4.1.38446.1.2.2.1.13 |
|
Setting this OID to reset (2) will cause the existing peak power value
to be replaced by the current load power value. Getting this OID will do nothing and return the noOperation(1) value. |
Enumerationr/w | .1.3.6.1.4.1.38446.1.2.2.1.14 |
|
Setting this OID to reset (2) will cause the device energy meter value
to be reset to zero. Getting this OID in models that support this feature will do nothing and return the noOperation(1) value. Models that do not… |
Enumerationr/w | .1.3.6.1.4.1.38446.1.2.2.1.15 |
|
Setting this OID to reset (2) will cause the outlet peak power meter value
to be reset to zero. Getting this OID in models that support this feature will do nothing and return the noOperation(1) value. Models that do… |
Enumerationr/w | .1.3.6.1.4.1.38446.1.2.2.1.16 |
|
Setting this OID to reset (2) will cause the outlet energy meter value
to be reset to zero. Getting this OID in models that support this feature will do nothing and return the noOperation(1) value. Models that do not… |
Enumerationr/w | .1.3.6.1.4.1.38446.1.2.2.1.17 |
|
Setting this OID to off(0) will disable the USB port. Setting this OID to on(1) will enable the USB port.
|
Enumerationr/w | .1.3.6.1.4.1.38446.1.2.2.1.18 |
|
Setting this OID to off(0) will disable the SSH connection. Setting this OID to on(1) will enable the SSH connection.
|
Enumerationr/w | .1.3.6.1.4.1.38446.1.2.2.1.19 |
|
Getting this OID will return noOperation(0). Setting this OID to reset(1) will reset NMC.
|
Enumerationr/w | .1.3.6.1.4.1.38446.1.2.2.1.20 |
|
Setting this OID to daisychain(0) will enable daisychain mode.
|
Enumerationr/w | .1.3.6.1.4.1.38446.1.2.2.1.21 |
pduUnitPropertiesTable
table.1.3.6.1.4.1.38446.1.2.3
·
1 row entry
·
17 columns
Uses the enlogic variant from
Command help
/opt/observium/mibs/enlogic.
Walk pduUnitPropertiesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENLOGIC-PDU-MIB' -M '/opt/observium/mibs/enlogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENLOGIC-PDU-MIB::pduUnitPropertiesTable'
A table of PDU properties
A unit properties entry containing objects for a particular unit.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
The index of the PDU properties table entry
|
Integer32 | .1.3.6.1.4.1.38446.1.2.3.1.1 |
|
A user-defined string identifying the PDU
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.2.3.1.2 |
|
The total number of outlets on the PDU
|
Integer32 | .1.3.6.1.4.1.38446.1.2.3.1.3 |
|
The total number of switched outlets on the PDU
|
Integer32 | .1.3.6.1.4.1.38446.1.2.3.1.4 |
|
The total number of metered outlets on the PDU
|
Integer32 | .1.3.6.1.4.1.38446.1.2.3.1.5 |
|
The total number of phases on the PDU
|
Integer32 | .1.3.6.1.4.1.38446.1.2.3.1.6 |
|
The total number of circuit breaker on the PDU
|
Integer32 | .1.3.6.1.4.1.38446.1.2.3.1.7 |
|
The maximum number of external sensors that can be connected to the PDU
|
Integer32 | .1.3.6.1.4.1.38446.1.2.3.1.8 |
|
The current number of external sensors connected to the PDU
|
Integer32 | .1.3.6.1.4.1.38446.1.2.3.1.9 |
|
The PDU voltage rating in Volts
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.2.3.1.10 |
|
The PDU current rating in Amps
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.2.3.1.11 |
|
The PDU frequency rating in Hz
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.2.3.1.12 |
|
The PDU VA (VoltAmps) rating.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.2.3.1.13 |
|
The PDU orientation
|
Enumeration | .1.3.6.1.4.1.38446.1.2.3.1.14 |
|
The outlet layout for the PDU. Getting this OID will return outlet layout for the device.
seqPhaseToNeutral(1) indicates outlet layout as follows: 1:1-N,2:2-N,3:3-N,4:1-N,5:2-N,... seqPhaseToPhase(2) indicates outlet la… |
Enumeration | .1.3.6.1.4.1.38446.1.2.3.1.15 |
|
The daisy-chain member type
|
Enumeration | .1.3.6.1.4.1.38446.1.2.3.1.16 |
|
The number of servers
|
Integer32 | .1.3.6.1.4.1.38446.1.2.3.1.17 |
pduUnitStatusTable
table.1.3.6.1.4.1.38446.1.2.4
·
1 row entry
·
12 columns
Uses the enlogic variant from
Command help
/opt/observium/mibs/enlogic.
Walk pduUnitStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENLOGIC-PDU-MIB' -M '/opt/observium/mibs/enlogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENLOGIC-PDU-MIB::pduUnitStatusTable'
A table of PDU status information
Status information from the PDU being queried
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
The index of the PDU status table entry
|
Integer32 | .1.3.6.1.4.1.38446.1.2.4.1.1 |
|
A user-defined string identifying the PDU
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.2.4.1.2 |
|
Returns the present load status of the PDU based on Active Power.
|
Enumeration | .1.3.6.1.4.1.38446.1.2.4.1.3 |
|
Returns power consumption, in Watts(W),
of the PDU being queried. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.38446.1.2.4.1.4 |
|
Returns power consumption, in Volt-Amps(VA)
of the PDU load being queried. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.38446.1.2.4.1.5 |
|
Returns peak power consumption, in Watts(W),
of the PDU being queried. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.38446.1.2.4.1.6 |
|
Indicates the date and time that peak power consumption occurred
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.2.4.1.7 |
|
Indicates the date and time of the last device peak power reset
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.2.4.1.8 |
|
Returns total energy consumed, in tenths of Kilowatt-Hours(kWh), of the PDU over its lifetime.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.38446.1.2.4.1.9 |
|
A user resettable energy meter measuring PDU energy consumption
in tenths of kilowatt-hours(kWh). |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.38446.1.2.4.1.10 |
|
Indicates the date and time of the last device energy meter reset
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.2.4.1.11 |
|
Indicates the date and time of the last outlets energy meter reset
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.2.4.1.12 |
pduInputPhaseConfigTable
table.1.3.6.1.4.1.38446.1.3.2
·
1 row entry
·
17 columns
Uses the enlogic variant from
Command help
/opt/observium/mibs/enlogic.
Walk pduInputPhaseConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENLOGIC-PDU-MIB' -M '/opt/observium/mibs/enlogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENLOGIC-PDU-MIB::pduInputPhaseConfigTable'
A table of PDU Input Phase configuration data
An input phase entry containing objects for a particular input phase.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
The index of the PDU Input Phase configuration table entry
|
Integer32 | .1.3.6.1.4.1.38446.1.3.2.1.1 |
|
The total number of Input Phases
|
Integer32 | .1.3.6.1.4.1.38446.1.3.2.1.2 |
|
This OID controls the behavior of a Switched PDU Input Phase when an
overload condition is possible and additional outlets are requested to be turned on. Setting this OID to alwaysAllowTurnON (1) will always allow th… |
Enumerationr/w | .1.3.6.1.4.1.38446.1.3.2.1.3 |
|
User-defined lower critical input phase current alarm threshold in hundredths of Amps(A).
|
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.38446.1.3.2.1.4 |
|
User-defined lower non-critical (warning) input phase current alarm threshold in hundredths of Amps(A).
|
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.38446.1.3.2.1.5 |
|
User-defined upper critical input phase current alarm threshold in hundredths of Amps(A).
|
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.38446.1.3.2.1.6 |
|
User-defined upper non-critical (warning) input phase current alarm threshold in hundredths of Amps(A).
|
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.38446.1.3.2.1.7 |
|
User-defined lower critical input phase voltage alarm threshold in Volts(V).
|
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.38446.1.3.2.1.8 |
|
User-defined lower non-critical (warning) input phase voltage alarm threshold in Volts(V).
|
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.38446.1.3.2.1.9 |
|
User-defined upper critical input phase voltage alarm threshold in Volts(V).
|
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.38446.1.3.2.1.10 |
|
User-defined upper non-critical (warning) input phase voltage alarm threshold in Volts(V).
|
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.38446.1.3.2.1.11 |
|
The hysteresis used for current alarm deassertions in hundredths of Amps(A).
|
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.38446.1.3.2.1.12 |
|
The delay measured in samples before a current state is asserted. If the
value is zero, then the state is asserted as soon as it is detected; if it is non-zero, say n, then the assertion condition must exist for n+1 … |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.38446.1.3.2.1.13 |
|
A bit string indicating which current alarm thresholds are enabled.
|
Bitsr/w | .1.3.6.1.4.1.38446.1.3.2.1.14 |
|
The hysteresis used for voltage alarm deassertions in Volts(V).
|
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.38446.1.3.2.1.15 |
|
The delay measured in samples before a voltage state is asserted. If the
value is zero, then the state is asserted as soon as it is detected; if it is non-zero, say n, then the assertion condition must exist for n+1 … |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.38446.1.3.2.1.16 |
|
A bit string indicating which voltage alarm thresholds are enabled.
|
Bitsr/w | .1.3.6.1.4.1.38446.1.3.2.1.17 |
.1.3.6.1.4.1.38446.1.3.3
·
1 row entry
·
2 columns
Uses the enlogic variant from
Command help
/opt/observium/mibs/enlogic.
Walk pduInputPhasePropertiesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENLOGIC-PDU-MIB' -M '/opt/observium/mibs/enlogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENLOGIC-PDU-MIB::pduInputPhasePropertiesTable'
A table of PDU Input Phase properties
An input phase properties entry containing objects for a particular input phase.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
The index of the PDU Input Phase status entry
|
Integer32 | .1.3.6.1.4.1.38446.1.3.3.1.1 |
|
The numeric Input Phase ID
|
Integer32 | .1.3.6.1.4.1.38446.1.3.3.1.2 |
pduInputPhaseStatusTable
table.1.3.6.1.4.1.38446.1.3.4
·
1 row entry
·
9 columns
Uses the enlogic variant from
Command help
/opt/observium/mibs/enlogic.
Walk pduInputPhaseStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENLOGIC-PDU-MIB' -M '/opt/observium/mibs/enlogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENLOGIC-PDU-MIB::pduInputPhaseStatusTable'
A table of PDU Input Phase status data
An input phase status entry containing objects for a particular input phase.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
The index of the PDU Input Phase status entry
|
Integer32 | .1.3.6.1.4.1.38446.1.3.4.1.1 |
|
The numeric Input Phase ID
|
Integer32 | .1.3.6.1.4.1.38446.1.3.4.1.2 |
|
Indicates the present current status of the PDU Phase in case of Y connection or PDU Line in case of Delta conneciton.
|
Enumeration | .1.3.6.1.4.1.38446.1.3.4.1.3 |
|
Indicates the present voltage status of the PDU Input Phase being queried
|
Enumeration | .1.3.6.1.4.1.38446.1.3.4.1.4 |
|
Returns the current draw, in hundredths of Amps(A), of the load on the
PDU Phase/Line being queried. Nodes with pduInputPhaseStatusIndex from 1 to 3 indicate Y connection Phase values or Delta connection Line values… |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.38446.1.3.4.1.5 |
|
Returns the voltage, in Volts(V), of the PDU Phase/Line being queried.
Nodes with pduInputPhaseStatusIndex from 1 to 3 indicate Y connection Phase values or Delta connection Line values, and nodes with pduInputPhaseSta… |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.38446.1.3.4.1.6 |
|
Returns power consumption, in Watts(W), consumed on the PDU Phase/Line
being queried. Nodes with pduInputPhaseStatusIndex from 1 to 3 indicate Y connection Phase values or Delta connection Line values, and nodes with p… |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.38446.1.3.4.1.7 |
|
Returns power consumption, in Volt-Amps(VA), of the PDU Phase/Line being queried.
Nodes with pduInputPhaseStatusIndex from 1 to 3 indicate Y connection Phase values or Delta connection Line values, and nodes with pduI… |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.38446.1.3.4.1.8 |
|
Returns the ratio of active to apparent power of the PDU Phase/Line being queried.
Nodes with pduInputPhaseStatusIndex from 1 to 3 indicate Y connection Phase values or Delta connection Line values, and nodes with pdu… |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.38446.1.3.4.1.9 |
.1.3.6.1.4.1.38446.1.4.2
·
1 row entry
·
11 columns
Uses the enlogic variant from
Command help
/opt/observium/mibs/enlogic.
Walk pduCircuitBreakerConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENLOGIC-PDU-MIB' -M '/opt/observium/mibs/enlogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENLOGIC-PDU-MIB::pduCircuitBreakerConfigTable'
A table of PDU Circuit Breaker configuration data
A circuit breaker configuration entry containing objects for a particular circuit breaker.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
The index of the PDU Circuit Breaker configuration table entry
|
Integer32 | .1.3.6.1.4.1.38446.1.4.2.1.1 |
|
The number of circuit breakers on the PDU
|
Integer32 | .1.3.6.1.4.1.38446.1.4.2.1.2 |
|
The label of the circuit breaker
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.4.2.1.3 |
|
This OID controls the behavior of a Switched PDU Circuit
Breaker when an overload condition is possible and additional outlets are requested to be turned on. Setting this OID to alwaysAllowTurnON (1) will always allo… |
Enumerationr/w | .1.3.6.1.4.1.38446.1.4.2.1.4 |
|
User-defined lower critical circuit breaker current alarm threshold in hundredths of Amps(A).
|
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.38446.1.4.2.1.5 |
|
User-defined lower non-critical (warning) circuit breaker current alarm threshold in hundredths of Amps(A).
|
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.38446.1.4.2.1.6 |
|
User-defined upper critical circuit breaker current alarm threshold in hundredths of Amps(A).
|
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.38446.1.4.2.1.7 |
|
User-defined upper non-critical (warning) circuit breaker current alarm threshold in hundredths of Amps(A).
|
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.38446.1.4.2.1.8 |
|
The hysteresis used for deassertions in hundredths of Amps(A).
|
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.38446.1.4.2.1.9 |
|
The delay measured in samples before a state is asserted.
If the value is zero, then the state is asserted as soon as it is detected; if it is non-zero, say n, then the assertion condition must exist for n+1 consecut… |
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.38446.1.4.2.1.10 |
|
A bit string indicating which alarm thresholds are enabled.
|
Bitsr/w | .1.3.6.1.4.1.38446.1.4.2.1.11 |
.1.3.6.1.4.1.38446.1.4.3
·
1 row entry
·
3 columns
Uses the enlogic variant from
Command help
/opt/observium/mibs/enlogic.
Walk pduCircuitBreakerPropertiesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENLOGIC-PDU-MIB' -M '/opt/observium/mibs/enlogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENLOGIC-PDU-MIB::pduCircuitBreakerPropertiesTable'
A table of PDU circuit breaker properties
A circuit breaker properties entry containing objects for a particular circuit breaker.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
The index of the PDU Circuit Breaker properties table entry
|
Integer32 | .1.3.6.1.4.1.38446.1.4.3.1.1 |
|
The number of Circuit Breakers
|
Integer32 | .1.3.6.1.4.1.38446.1.4.3.1.2 |
|
This OID describes the outlet phase connections on
the referenced bank as follows: seqPhase1ToNeutral(1) indicates that outlets attached to circuit breaker are connected from Phase 1 to Neutral. seqPhase2ToNeutral(2… |
Enumeration | .1.3.6.1.4.1.38446.1.4.3.1.3 |
.1.3.6.1.4.1.38446.1.4.4
·
1 row entry
·
5 columns
Uses the enlogic variant from
Command help
/opt/observium/mibs/enlogic.
Walk pduCircuitBreakerStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENLOGIC-PDU-MIB' -M '/opt/observium/mibs/enlogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENLOGIC-PDU-MIB::pduCircuitBreakerStatusTable'
A table of PDU circuit breaker status data
A circuit breaker status entry containing objects for a particular circuit breaker.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
The index of the PDU Circuit Breaker status table entry
|
Integer32 | .1.3.6.1.4.1.38446.1.4.4.1.1 |
|
The number of Circuit Breakers
|
Integer32 | .1.3.6.1.4.1.38446.1.4.4.1.2 |
|
The label on the PDU identifying the circuit breaker
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.4.4.1.3 |
|
Indicates the present load status of the PDU Circuit
Breaker being queried |
Enumeration | .1.3.6.1.4.1.38446.1.4.4.1.4 |
|
Returns the current draw, in hundredths of Amps(A), of the load on
the PDU Circuit Breaker being queried. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.38446.1.4.4.1.5 |
.1.3.6.1.4.1.38446.1.5.2
·
1 row entry
·
6 columns
Uses the enlogic variant from
Command help
/opt/observium/mibs/enlogic.
Walk pduOutletSwitchedConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENLOGIC-PDU-MIB' -M '/opt/observium/mibs/enlogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENLOGIC-PDU-MIB::pduOutletSwitchedConfigTable'
A table of PDU Switched Outlet configuration data
An outlet configuration entry containing objects for a particular outlet.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
The index of the PDU Switched Outlet configuration table entry
|
Integer32 | .1.3.6.1.4.1.38446.1.5.2.1.1 |
|
The user-defined name for the Switched Outlet
|
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.5.2.1.2 |
|
The outlet state on device startup; overrides
the global value pduUnitConfigGlobalOutletStateOnStartup. |
Enumerationr/w | .1.3.6.1.4.1.38446.1.5.2.1.3 |
|
The amount of delay, in seconds, between when power is
provided to outlets the outlet and when this outlet starts providing power |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.38446.1.5.2.1.4 |
|
The amount of time, in seconds, this outlet will delay
powering off |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.38446.1.5.2.1.5 |
|
The amount of time, in seconds, this outlet will remain
in powered off state before returning to power on state during a reboot action. |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.38446.1.5.2.1.6 |
.1.3.6.1.4.1.38446.1.5.3
·
1 row entry
·
5 columns
Uses the enlogic variant from
Command help
/opt/observium/mibs/enlogic.
Walk pduOutletSwitchedPropertiesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENLOGIC-PDU-MIB' -M '/opt/observium/mibs/enlogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENLOGIC-PDU-MIB::pduOutletSwitchedPropertiesTable'
A table of PDU Switched Outlet properties
An outlet properties entry containing objects for a particular outlet.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
The index of the PDU Switched Outlet properties table entry
|
Integer32 | .1.3.6.1.4.1.38446.1.5.3.1.1 |
|
The numeric Switched Outlet ID
|
Integer32 | .1.3.6.1.4.1.38446.1.5.3.1.2 |
|
The user-defined switched outlet ID string
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.5.3.1.3 |
|
This OID describes the outlet phase connections
on the referenced bank as follows: seqPhase1ToNeutral(1) indicates that outlets attached to Switched Outlet are connected from Phase 1 to Neutral. seqPhase2ToNeutral(2… |
Enumeration | .1.3.6.1.4.1.38446.1.5.3.1.4 |
|
The numeric Circuit Breaker ID
|
Integer32 | .1.3.6.1.4.1.38446.1.5.3.1.5 |
.1.3.6.1.4.1.38446.1.5.4
·
1 row entry
·
4 columns
Uses the enlogic variant from
Command help
/opt/observium/mibs/enlogic.
Walk pduOutletSwitchedStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENLOGIC-PDU-MIB' -M '/opt/observium/mibs/enlogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENLOGIC-PDU-MIB::pduOutletSwitchedStatusTable'
A table of PDU Switched Outlet status data
Status data from the PDU Switched Outlet being queried
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
The index of the PDU Switched Outlet status table entry
|
Integer32 | .1.3.6.1.4.1.38446.1.5.4.1.1 |
|
The numeric Switched Outlet ID
|
Integer32 | .1.3.6.1.4.1.38446.1.5.4.1.2 |
|
The user-defined switched outlet ID string
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.5.4.1.3 |
|
Indicates the present switch state of the
PDU switched outlet being queried |
Enumeration | .1.3.6.1.4.1.38446.1.5.4.1.4 |
.1.3.6.1.4.1.38446.1.5.5
·
1 row entry
·
4 columns
Uses the enlogic variant from
Command help
/opt/observium/mibs/enlogic.
Walk pduOutletSwitchedControlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENLOGIC-PDU-MIB' -M '/opt/observium/mibs/enlogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENLOGIC-PDU-MIB::pduOutletSwitchedControlTable'
A table of PDU Switched Outlet status data
Status data from the PDU Switched Outlet
being queried
being queried
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
The index to the PDU switched outlet
control data table entry |
Integer32 | .1.3.6.1.4.1.38446.1.5.5.1.1 |
|
The numeric Switched Outlet ID
|
Integer32 | .1.3.6.1.4.1.38446.1.5.5.1.2 |
|
The user-defined switched outlet ID string
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.5.5.1.3 |
|
Getting this variable will return the outlet state.
If the outlet is on, the immediateOn (2) value will be returned. If the outlet is off, the immediateOff (1) value will be returned. If the state of the outlet canno… |
Enumerationr/w | .1.3.6.1.4.1.38446.1.5.5.1.4 |
.1.3.6.1.4.1.38446.1.5.7
·
1 row entry
·
9 columns
Uses the enlogic variant from
Command help
/opt/observium/mibs/enlogic.
Walk pduOutletMeteredConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENLOGIC-PDU-MIB' -M '/opt/observium/mibs/enlogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENLOGIC-PDU-MIB::pduOutletMeteredConfigTable'
A table of PDU Metered Outlet configuration data
An outlet configuration entry containing objects for a particular outlet.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
The index of the PDU Metered Outlet
configuration table entry |
Integer32 | .1.3.6.1.4.1.38446.1.5.7.1.1 |
|
The user-defined name for the Metered Outlet
|
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.5.7.1.2 |
|
User-defined lower critical outlet active power alarm threshold in Watts(W).
|
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.38446.1.5.7.1.3 |
|
User-defined lower non-critical (warning) outlet active power alarm threshold in Watts(W).
|
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.38446.1.5.7.1.4 |
|
User-defined upper critical outlet active power alarm threshold in Watts(W).
|
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.38446.1.5.7.1.5 |
|
User-defined upper non-critical (warning) outlet active power alarm threshold in Watts(W).
|
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.38446.1.5.7.1.6 |
|
The hysteresis used for deassertions in Watts(W).
|
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.38446.1.5.7.1.7 |
|
The delay measured in samples before a state
is asserted. If the value is zero, then the state is asserted as soon as it is detected; if it is non-zero, say n, then the assertion condition must exist for n+1 consecu… |
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.38446.1.5.7.1.8 |
|
A bit string indicating which alarm
thresholds are enabled. |
Bitsr/w | .1.3.6.1.4.1.38446.1.5.7.1.9 |
.1.3.6.1.4.1.38446.1.5.8
·
1 row entry
·
6 columns
Uses the enlogic variant from
Command help
/opt/observium/mibs/enlogic.
Walk pduOutletMeteredPropertiesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENLOGIC-PDU-MIB' -M '/opt/observium/mibs/enlogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENLOGIC-PDU-MIB::pduOutletMeteredPropertiesTable'
A table of PDU Metered Outlet properties
Configuration data from the PDU Metered
Outlet being queried
Outlet being queried
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
The index of the PDU Metered Outlet
properties table entry |
Integer32 | .1.3.6.1.4.1.38446.1.5.8.1.1 |
|
The numeric Metered Outlet ID
|
Integer32 | .1.3.6.1.4.1.38446.1.5.8.1.2 |
|
The user-defined Metered outlet ID string
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.5.8.1.3 |
|
This OID describes the outlet phase connections
on the referenced bank as follows: seqPhase1ToNeutral(1) indicates that outlets attached to Metered Outlet are connected from Phase 1 to Neutral. seqPhase2ToNeutral(2)… |
Enumeration | .1.3.6.1.4.1.38446.1.5.8.1.4 |
|
The numeric Circuit Breaker ID
|
Integer32 | .1.3.6.1.4.1.38446.1.5.8.1.5 |
|
Maximum power rating of the PDU metered outlet
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.38446.1.5.8.1.6 |
.1.3.6.1.4.1.38446.1.5.9
·
1 row entry
·
11 columns
Uses the enlogic variant from
Command help
/opt/observium/mibs/enlogic.
Walk pduOutletMeteredStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENLOGIC-PDU-MIB' -M '/opt/observium/mibs/enlogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENLOGIC-PDU-MIB::pduOutletMeteredStatusTable'
A table of PDU Metered Outlet status data
Status data from the PDU Metered Outlet being queried
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
The index of the PDU Metered Outlet status table entry
|
Integer32 | .1.3.6.1.4.1.38446.1.5.9.1.1 |
|
The numeric Metered Outlet ID
|
Integer32 | .1.3.6.1.4.1.38446.1.5.9.1.2 |
|
The user-defined Metered outlet ID string
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.5.9.1.3 |
|
Returns the present load status of the PDU metered outlet being queried.
|
Enumeration | .1.3.6.1.4.1.38446.1.5.9.1.4 |
|
Returns the current draw, in hundredths of Amps(A), of the load on the PDU
outlet being queried. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.38446.1.5.9.1.5 |
|
Returns the power draw, in Watts(W), of the load
on the PDU outlet being queried. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.38446.1.5.9.1.6 |
|
Returns the ratio of active to apparent power
of the PDU Outlet being queried |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.38446.1.5.9.1.7 |
|
Returns peak power consumption, in Watts(W),
of the Rack PDU outlet being queried. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.38446.1.5.9.1.8 |
|
Indicates the date and time that this metered
outlet's peak power consumption occurred |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.5.9.1.9 |
|
Indicates the start date and time that this metered
outlet began recording peak power observations |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.5.9.1.10 |
|
A user resettable energy meter measuring outlet load energy
consumption in tenths of Kilowatt-Hours(kWh). |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.38446.1.5.9.1.11 |
.1.3.6.1.4.1.38446.1.6.2
·
1 row entry
·
8 columns
Uses the enlogic variant from
Command help
/opt/observium/mibs/enlogic.
Walk pduExternalSensorNamePlateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENLOGIC-PDU-MIB' -M '/opt/observium/mibs/enlogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENLOGIC-PDU-MIB::pduExternalSensorNamePlateTable'
A table of PDU ExternalSensorNamePlate data
External Sensor Name Plate data from the external
sensor being queried. The number of entries equals
the value of pduExternalSensorNamePlateTableSize.
sensor being queried. The number of entries equals
the value of pduExternalSensorNamePlateTableSize.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
The index of the PDU External Sensor status table entry
|
Integer32 | .1.3.6.1.4.1.38446.1.6.2.1.1 |
|
A user-defined string identifying the external sensor
|
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.6.2.1.2 |
|
A user-defined description of the external sensor
|
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.6.2.1.3 |
|
A user-defined string identifying the location of the PDU
|
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.6.2.1.4 |
|
The serial number of the external sensor being queried
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.6.2.1.5 |
|
The type of external sensor.
|
Enumeration | .1.3.6.1.4.1.38446.1.6.2.1.6 |
|
The base units the external sensor is measured in.
This parameter does not apply to onOff, trip, vibration, waterDetection, smokeDetection sensors. |
Enumeration | .1.3.6.1.4.1.38446.1.6.2.1.7 |
|
Unique identifier of the external sensor.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.38446.1.6.2.1.8 |
.1.3.6.1.4.1.38446.1.6.3
·
1 row entry
·
9 columns
Uses the enlogic variant from
Command help
/opt/observium/mibs/enlogic.
Walk pduExternalSensorConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENLOGIC-PDU-MIB' -M '/opt/observium/mibs/enlogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENLOGIC-PDU-MIB::pduExternalSensorConfigTable'
A table of PDU External Sensor configuration data
Configuration data from the PDU External
Sensor being queried
Sensor being queried
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
The index of the PDU External Sensor
configuration table entry |
Integer32 | .1.3.6.1.4.1.38446.1.6.3.1.1 |
|
User-defined lower critical alarm threshold in pduExternalSensorNamePlateUnits.
|
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.38446.1.6.3.1.2 |
|
User-defined lower non-critical (warning) alarm threshold in pduExternalSensorNamePlateUnits.
|
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.38446.1.6.3.1.3 |
|
User-defined upper critical alarm threshold in pduExternalSensorNamePlateUnits.
|
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.38446.1.6.3.1.4 |
|
User-defined upper non-critical (warning) alarm threshold in pduExternalSensorNamePlateUnits.
|
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.38446.1.6.3.1.5 |
|
The hysteresis used for deassertions.
|
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.38446.1.6.3.1.6 |
|
The delay measured in samples before a state is
asserted. If the value is zero, then the state is asserted as soon as it is detected; if it is non-zero, say n, then the assertion condition must exist for n+1 consecu… |
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.38446.1.6.3.1.7 |
|
A bit string indicating which alarm
thresholds are enabled. |
Bitsr/w | .1.3.6.1.4.1.38446.1.6.3.1.8 |
|
User defined alarm state of external sensor
|
Enumerationr/w | .1.3.6.1.4.1.38446.1.6.3.1.9 |
.1.3.6.1.4.1.38446.1.6.4
·
1 row entry
·
8 columns
Uses the enlogic variant from
Command help
/opt/observium/mibs/enlogic.
Walk pduExternalSensorStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENLOGIC-PDU-MIB' -M '/opt/observium/mibs/enlogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENLOGIC-PDU-MIB::pduExternalSensorStatusTable'
A table of PDU External Sensor status data
Status data from the PDU External Sensor
being queried
being queried
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
The index of the PDU External Sensor status table entry
|
Integer32 | .1.3.6.1.4.1.38446.1.6.4.1.1 |
|
The user-defined name for the External Sensor
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.6.4.1.2 |
|
Indicates whether the external sensor is
in a hot or cold aisle |
Enumerationr/w | .1.3.6.1.4.1.38446.1.6.4.1.3 |
|
The communications status of the sensor
|
Enumeration | .1.3.6.1.4.1.38446.1.6.4.1.4 |
|
This OID reports the current state of the sensor.
A notPresent (0) response indicates that no sensor is attached. An alarmed (1) response indicates that the sensor is present and its measured reading indicates alarmed… |
Enumeration | .1.3.6.1.4.1.38446.1.6.4.1.5 |
|
Sensor reading in pduExternalSensorConfigUnits value.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.38446.1.6.4.1.6 |
|
The sensor reading timestamp.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.6.4.1.7 |
|
Temperature sensor reading in tenths of pduExternalSensorConfigUnits value.
This OID is applied to temperature sensor only |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.38446.1.6.4.1.8 |
pduServerPingTable
table.1.3.6.1.4.1.38446.1.7.2
·
1 row entry
·
3 columns
Uses the enlogic variant from
Command help
/opt/observium/mibs/enlogic.
Walk pduServerPingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENLOGIC-PDU-MIB' -M '/opt/observium/mibs/enlogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENLOGIC-PDU-MIB::pduServerPingTable'
A table of Server Ping data
Server Ping data from the server being queried.
The number of entries equals the value of pduServerPingTableSize.
The number of entries equals the value of pduServerPingTableSize.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
The index of the PDU pduServerPing table entry
|
Integer32 | .1.3.6.1.4.1.38446.1.7.2.1.1 |
|
The IP Address/host name of the server
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.7.2.1.2 |
|
Is ping enabled for this server?
|
Enumerationr/w | .1.3.6.1.4.1.38446.1.7.2.1.3 |
pduUnitSmartCabinetTable
table.1.3.6.1.4.1.38446.1.8.2
·
1 row entry
·
4 columns
Uses the enlogic variant from
Command help
/opt/observium/mibs/enlogic.
Walk pduUnitSmartCabinetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENLOGIC-PDU-MIB' -M '/opt/observium/mibs/enlogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENLOGIC-PDU-MIB::pduUnitSmartCabinetTable'
A table of Smart Cabinet information
Information of Smart Cabinet
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
The index of the PDU Smart Cabinet table entry
|
Integer32 | .1.3.6.1.4.1.38446.1.8.2.1.1 |
|
User name of ID card
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.8.2.1.2 |
|
Card ID.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.38446.1.8.2.1.3 |
|
Indicates the date and time of information update
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.8.2.1.4 |
trapsInfoTable
table.1.3.6.1.4.1.38446.1.9.1.1
·
1 row entry
·
7 columns
Uses the enlogic variant from
Command help
/opt/observium/mibs/enlogic.
Walk trapsInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENLOGIC-PDU-MIB' -M '/opt/observium/mibs/enlogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENLOGIC-PDU-MIB::trapsInfoTable'
A list of Trap Information entries. The number of entries are given by the value of pduUnitTableSize.
An entry containing objects used in traps
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
The index of the traps table entry
|
Integer32 | .1.3.6.1.4.1.38446.1.9.1.1.1.1 |
|
The user currently logged in.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.9.1.1.1.2 |
|
The user added, deleted, or modified.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.9.1.1.1.3 |
|
The version of Firmware.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.9.1.1.1.4 |
|
The role added, deleted, or modified.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.9.1.1.1.5 |
|
Comma separated list of SMTP recipients
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.9.1.1.1.6 |
|
The IP address/host name of the SMTP server
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.1.9.1.1.1.7 |
espNamePlateTable
table.1.3.6.1.4.1.38446.2.1.2
·
1 row entry
·
15 columns
Uses the enlogic variant from
Command help
/opt/observium/mibs/enlogic.
Walk espNamePlateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENLOGIC-PDU-MIB' -M '/opt/observium/mibs/enlogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENLOGIC-PDU-MIB::espNamePlateTable'
A table of es PDU nameplate data
Nameplate data from the PDU being queried. The numbers of entries equals the value of espNamePlateTableSize.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The index of the es PDU nameplate table entry
|
Integer32 | .1.3.6.1.4.1.38446.2.1.2.1.1 |
||||||||||||||
|
A user-defined string identifying the es PDU
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.2.1.2.1.2 |
||||||||||||||
|
A user-defined string identifying the location of PDU
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.2.1.2.1.3 |
||||||||||||||
|
The type of address format
|
INET-ADDRESS-MIBInetAddressType Type Values:
|
.1.3.6.1.4.1.38446.2.1.2.1.4 |
||||||||||||||
|
The current IP address. A value of 0.0.0.0 indicates an error or an unset option
|
INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255 |
.1.3.6.1.4.1.38446.2.1.2.1.5 |
||||||||||||||
|
The current netmask. A value of 0.0.0.0 indiates an error or an unset option
|
INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255 |
.1.3.6.1.4.1.38446.2.1.2.1.6 |
||||||||||||||
|
The current gateway. A value of 0.0.0.0 indicates an error or an unset option
|
INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255 |
.1.3.6.1.4.1.38446.2.1.2.1.7 |
||||||||||||||
|
The assigned MAC address for the PDU
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.38446.2.1.2.1.8 |
||||||||||||||
|
The difference in hours and minutes from Coordinated Universal
Time(UTC) for the time used in a particular time zone |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.2.1.2.1.9 |
||||||||||||||
|
The PDU model number
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.2.1.2.1.10 |
||||||||||||||
|
The PDU serial number
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.2.1.2.1.11 |
||||||||||||||
|
The date the PDU was manufactured in mm/dd/yyyy format
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.2.1.2.1.12 |
||||||||||||||
|
The PDU firmware version
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.2.1.2.1.13 |
||||||||||||||
|
Timestamp of when the PDU firmware was last updated
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.2.1.2.1.14 |
||||||||||||||
|
The type of Unit, PDU or Inline Meter
|
Enumeration | .1.3.6.1.4.1.38446.2.1.2.1.15 |
espUnitConfigTable
table.1.3.6.1.4.1.38446.2.2.2
·
1 row entry
·
5 columns
Uses the enlogic variant from
Command help
/opt/observium/mibs/enlogic.
Walk espUnitConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENLOGIC-PDU-MIB' -M '/opt/observium/mibs/enlogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENLOGIC-PDU-MIB::espUnitConfigTable'
A table of PDU configuration data
Configuration data from the PDU being queried. The number of entries equals the value of espUnitTableSize
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
The index of the PDU Unit Config Entry
|
Integer32 | .1.3.6.1.4.1.38446.2.2.2.1.1 |
|
A user-defined string identifying the PDU
|
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.2.2.2.1.2 |
|
A user-defined string identifying the location of the PDU
|
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.2.2.2.1.3 |
|
Setting this OID to reset (2) will cause the device energy meter value
to be reset to zero. Getting this OID in models that support this feature will do nothing and return the noOperation(1) value. Models that do not… |
Enumerationr/w | .1.3.6.1.4.1.38446.2.2.2.1.15 |
|
Getting this OID will return noOperation(0). Setting this OID to reset(1) will reset NMC.
|
Enumerationr/w | .1.3.6.1.4.1.38446.2.2.2.1.20 |
espUnitPropertiesTable
table.1.3.6.1.4.1.38446.2.2.3
·
1 row entry
·
13 columns
Uses the enlogic variant from
Command help
/opt/observium/mibs/enlogic.
Walk espUnitPropertiesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENLOGIC-PDU-MIB' -M '/opt/observium/mibs/enlogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENLOGIC-PDU-MIB::espUnitPropertiesTable'
A table of PDU properties
A unit properties entry containing objects for a particular unit.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
The index of the PDU properties table entry
|
Integer32 | .1.3.6.1.4.1.38446.2.2.3.1.1 |
|
A user-defined string identifying the PDU
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.2.2.3.1.2 |
|
The total number of outlets on the PDU
|
Integer32 | .1.3.6.1.4.1.38446.2.2.3.1.3 |
|
The total number of switched outlets on the PDU
|
Integer32 | .1.3.6.1.4.1.38446.2.2.3.1.4 |
|
The total number of metered outlets on the PDU
|
Integer32 | .1.3.6.1.4.1.38446.2.2.3.1.5 |
|
The total number of phases on the PDU
|
Integer32 | .1.3.6.1.4.1.38446.2.2.3.1.6 |
|
The total number of circuit breaker on the PDU
|
Integer32 | .1.3.6.1.4.1.38446.2.2.3.1.7 |
|
The maximum number of external sensors that can be connected to the PDU
|
Integer32 | .1.3.6.1.4.1.38446.2.2.3.1.8 |
|
The current number of external sensors connected to the PDU
|
Integer32 | .1.3.6.1.4.1.38446.2.2.3.1.9 |
|
The PDU voltage rating in Volts
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.2.2.3.1.10 |
|
The PDU current rating in Amps
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.2.2.3.1.11 |
|
The PDU frequency rating in Hz
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.2.2.3.1.12 |
|
The PDU VA (VoltAmps) rating.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.2.2.3.1.13 |
espUnitStatusTable
table.1.3.6.1.4.1.38446.2.2.4
·
1 row entry
·
8 columns
Uses the enlogic variant from
Command help
/opt/observium/mibs/enlogic.
Walk espUnitStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENLOGIC-PDU-MIB' -M '/opt/observium/mibs/enlogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENLOGIC-PDU-MIB::espUnitStatusTable'
A table of PDU status information
Status information from the PDU being queried
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
The index of the PDU status table entry
|
Integer32 | .1.3.6.1.4.1.38446.2.2.4.1.1 |
|
A user-defined string identifying the PDU
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.2.2.4.1.2 |
|
Returns the present load status of the PDU based on Active Power.
|
Enumeration | .1.3.6.1.4.1.38446.2.2.4.1.3 |
|
Returns power consumption, in Watts(W),
of the PDU being queried. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.38446.2.2.4.1.4 |
|
Returns power consumption, in Volt-Amps(VA)
of the PDU load being queried. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.38446.2.2.4.1.5 |
|
Returns total energy consumed, in tenths of Kilowatt-Hours(kWh), of the PDU over its lifetime.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.38446.2.2.4.1.9 |
|
A user resettable energy meter measuring PDU energy consumption
in tenths of kilowatt-hours(kWh). |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.38446.2.2.4.1.10 |
|
Indicates the date and time of the last device energy meter reset
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.2.2.4.1.11 |
espInputPhaseConfigTable
table.1.3.6.1.4.1.38446.2.3.2
·
1 row entry
·
2 columns
Uses the enlogic variant from
Command help
/opt/observium/mibs/enlogic.
Walk espInputPhaseConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENLOGIC-PDU-MIB' -M '/opt/observium/mibs/enlogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENLOGIC-PDU-MIB::espInputPhaseConfigTable'
A table of PDU Input Phase configuration data
An input phase entry containing objects for a particular input phase.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
The index of the PDU Input Phase configuration table entry
|
Integer32 | .1.3.6.1.4.1.38446.2.3.2.1.1 |
|
The total number of Input Phases
|
Integer32 | .1.3.6.1.4.1.38446.2.3.2.1.2 |
espInputPhaseStatusTable
table.1.3.6.1.4.1.38446.2.3.4
·
1 row entry
·
9 columns
Uses the enlogic variant from
Command help
/opt/observium/mibs/enlogic.
Walk espInputPhaseStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENLOGIC-PDU-MIB' -M '/opt/observium/mibs/enlogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENLOGIC-PDU-MIB::espInputPhaseStatusTable'
A table of PDU Input Phase status data
An input phase status entry containing objects for a particular input phase.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
The index of the PDU Input Phase status entry
|
Integer32 | .1.3.6.1.4.1.38446.2.3.4.1.1 |
|
The numeric Input Phase ID
|
Integer32 | .1.3.6.1.4.1.38446.2.3.4.1.2 |
|
Indicates the present current status of the PDU Input Phase being queried
|
Enumeration | .1.3.6.1.4.1.38446.2.3.4.1.3 |
|
Indicates the present voltage status of the PDU Input Phase being queried
|
Enumeration | .1.3.6.1.4.1.38446.2.3.4.1.4 |
|
Returns the current draw, in hundredths of Amps(A), of the load on the
PDU Input Phase being queried. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.38446.2.3.4.1.5 |
|
Returns the voltage, in Volts(V), of the PDU Input Phase being queried.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.38446.2.3.4.1.6 |
|
Returns power consumption, in Watts(W),
consumed on the PDU Input Phase being queried. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.38446.2.3.4.1.7 |
|
Returns power consumption, in Volt-Amps(VA),
of the PDU Input Phase being queried. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.38446.2.3.4.1.8 |
|
Returns the ratio of active to apparent power of the PDU Input Phase being queried.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.38446.2.3.4.1.9 |
.1.3.6.1.4.1.38446.2.4.2
·
1 row entry
·
3 columns
Uses the enlogic variant from
Command help
/opt/observium/mibs/enlogic.
Walk espCircuitBreakerConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENLOGIC-PDU-MIB' -M '/opt/observium/mibs/enlogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENLOGIC-PDU-MIB::espCircuitBreakerConfigTable'
A table of PDU Circuit Breaker configuration data
A circuit breaker configuration entry containing objects for a particular circuit breaker.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
The index of the PDU Circuit Breaker configuration table entry
|
Integer32 | .1.3.6.1.4.1.38446.2.4.2.1.1 |
|
The number of circuit breakers on the PDU
|
Integer32 | .1.3.6.1.4.1.38446.2.4.2.1.2 |
|
The label of the circuit breaker
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.2.4.2.1.3 |
.1.3.6.1.4.1.38446.2.4.3
·
1 row entry
·
3 columns
Uses the enlogic variant from
Command help
/opt/observium/mibs/enlogic.
Walk espCircuitBreakerPropertiesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENLOGIC-PDU-MIB' -M '/opt/observium/mibs/enlogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENLOGIC-PDU-MIB::espCircuitBreakerPropertiesTable'
A table of PDU circuit breaker properties
A circuit breaker properties entry containing objects for a particular circuit breaker.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
The index of the PDU Circuit Breaker properties table entry
|
Integer32 | .1.3.6.1.4.1.38446.2.4.3.1.1 |
|
The number of Circuit Breakers
|
Integer32 | .1.3.6.1.4.1.38446.2.4.3.1.2 |
|
This OID describes the outlet phase connections on
the referenced bank as follows: seqPhase1ToNeutral(1) indicates that outlets attached to circuit breaker are connected from Phase 1 to Neutral. seqPhase2ToNeutral(2… |
Enumeration | .1.3.6.1.4.1.38446.2.4.3.1.3 |
.1.3.6.1.4.1.38446.2.4.4
·
1 row entry
·
5 columns
Uses the enlogic variant from
Command help
/opt/observium/mibs/enlogic.
Walk espCircuitBreakerStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENLOGIC-PDU-MIB' -M '/opt/observium/mibs/enlogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENLOGIC-PDU-MIB::espCircuitBreakerStatusTable'
A table of PDU circuit breaker status data
A circuit breaker status entry containing objects for a particular circuit breaker.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
The index of the PDU Circuit Breaker status table entry
|
Integer32 | .1.3.6.1.4.1.38446.2.4.4.1.1 |
|
The number of Circuit Breakers
|
Integer32 | .1.3.6.1.4.1.38446.2.4.4.1.2 |
|
The label on the PDU identifying the circuit breaker
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.2.4.4.1.3 |
|
Indicates the present load status of the PDU Circuit
Breaker being queried |
Enumeration | .1.3.6.1.4.1.38446.2.4.4.1.4 |
|
Returns the current draw, in hundredths of Amps(A), of the load on
the PDU Circuit Breaker being queried. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.38446.2.4.4.1.5 |
.1.3.6.1.4.1.38446.2.6.2
·
1 row entry
·
5 columns
Uses the enlogic variant from
Command help
/opt/observium/mibs/enlogic.
Walk espExternalSensorNamePlateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENLOGIC-PDU-MIB' -M '/opt/observium/mibs/enlogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENLOGIC-PDU-MIB::espExternalSensorNamePlateTable'
A table of PDU ExternalSensorNamePlate data
External Sensor Name Plate data from the external
sensor being queried. The number of entries equals
the value of espExternalSensorNamePlateTableSize.
sensor being queried. The number of entries equals
the value of espExternalSensorNamePlateTableSize.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
The index of the PDU External Sensor status table entry
|
Integer32 | .1.3.6.1.4.1.38446.2.6.2.1.1 |
|
A user-defined string identifying the external sensor
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.2.6.2.1.2 |
|
The serial number of the external sensor being queried
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.2.6.2.1.5 |
|
The type of external sensor.
|
Enumeration | .1.3.6.1.4.1.38446.2.6.2.1.6 |
|
The base units the external sensor is measured in.
This parameter does not apply to onOff, trip, vibration, waterDetection, smokeDetection sensors. |
Enumeration | .1.3.6.1.4.1.38446.2.6.2.1.7 |
.1.3.6.1.4.1.38446.2.6.3
·
1 row entry
·
2 columns
Uses the enlogic variant from
Command help
/opt/observium/mibs/enlogic.
Walk espExternalSensorConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENLOGIC-PDU-MIB' -M '/opt/observium/mibs/enlogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENLOGIC-PDU-MIB::espExternalSensorConfigTable'
A table of PDU External Sensor configuration data
Configuration data from the PDU External
Sensor being queried
Sensor being queried
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
The index of the PDU External Sensor
configuration table entry |
Integer32 | .1.3.6.1.4.1.38446.2.6.3.1.1 |
|
User defined alarm state of external sensor
|
Enumerationr/w | .1.3.6.1.4.1.38446.2.6.3.1.9 |
.1.3.6.1.4.1.38446.2.6.4
·
1 row entry
·
7 columns
Uses the enlogic variant from
Command help
/opt/observium/mibs/enlogic.
Walk espExternalSensorStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENLOGIC-PDU-MIB' -M '/opt/observium/mibs/enlogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENLOGIC-PDU-MIB::espExternalSensorStatusTable'
A table of PDU External Sensor status data
Status data from the PDU External Sensor
being queried
being queried
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
The index of the PDU External Sensor status table entry
|
Integer32 | .1.3.6.1.4.1.38446.2.6.4.1.1 |
|
The user-defined name for the External Sensor
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.38446.2.6.4.1.2 |
|
Indicates whether the external sensor is
in a hot or cold aisle |
Enumerationr/w | .1.3.6.1.4.1.38446.2.6.4.1.3 |
|
The communications status of the sensor
|
Enumeration | .1.3.6.1.4.1.38446.2.6.4.1.4 |
|
This OID reports the current state of the sensor.
A notPresent (0) response indicates that no sensor is attached. An alarmed (1) response indicates that the sensor is present and its measured reading indicates alarmed… |
Enumeration | .1.3.6.1.4.1.38446.2.6.4.1.5 |
|
Sensor reading in espExternalSensorConfigUnits value.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.38446.2.6.4.1.6 |
|
Temperature sensor reading in tenths of espExternalSensorConfigUnits value.
This OID is applied to temperature sensor only |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.38446.2.6.4.1.8 |