dupsCommunicationLost | .1.3.6.1.4.1.2254.2.4.20.0.1 | SEVER: Communication with the UPS failed. |
dupsNoLongerLoadSeverity | .1.3.6.1.4.1.2254.2.4.20.0.10 | INFORMATION: Returned from Load Severity condition. |
dupsLoadOnBypass | .1.3.6.1.4.1.2254.2.4.20.0.11 | SEVER: The UPS loads on bypass. |
dupsNoLongerLoadOnBypass | .1.3.6.1.4.1.2254.2.4.20.0.12 | INFORMATION: The UPS is not on bypass mode. |
dupsUPSFault | .1.3.6.1.4.1.2254.2.4.20.0.13 | SEVER: A general fault caused in the UPS. |
dupsReturnFromUPSFault | .1.3.6.1.4.1.2254.2.4.20.0.14 | INFORMATION: The UPS is returned from general fault. |
dupsBatteryGroundFault | .1.3.6.1.4.1.2254.2.4.20.0.15 | SEVER: The UPS battery ground fault. |
dupsNoLongerBatteryFault | .1.3.6.1.4.1.2254.2.4.20.0.16 | INFORMATION: The UPS recovered from battery ground fault. |
dupsTestInProgress | .1.3.6.1.4.1.2254.2.4.20.0.17 | INFORMATION: The UPS test in progress. |
dupsBatteryTestFail | .1.3.6.1.4.1.2254.2.4.20.0.18 | SEVER: The UPS test fail. |
dupsFuseFailure | .1.3.6.1.4.1.2254.2.4.20.0.19 | SEVER: The UPS fuse failed. |
dupsCommunicationEstablished | .1.3.6.1.4.1.2254.2.4.20.0.2 | INFORMATION: Communication with the UPS reestablished. |
dupsFuseRecovered | .1.3.6.1.4.1.2254.2.4.20.0.20 | INFORMATION: The UPS fuse recovered. |
dupsOutputOverload | .1.3.6.1.4.1.2254.2.4.20.0.21 | SEVER: The UPS overload!. |
dupsNoLongerOverload | .1.3.6.1.4.1.2254.2.4.20.0.22 | INFORMATION: Recovered from UPS overload. |
dupsOutputOverCurrent | .1.3.6.1.4.1.2254.2.4.20.0.23 | SEVER: The UPS output overcurrent. |
dupsNoLongerOutputOverCurrent | .1.3.6.1.4.1.2254.2.4.20.0.24 | INFORMATION: Recovered from UPS overcurrent. |
dupsInverterAbnormal | .1.3.6.1.4.1.2254.2.4.20.0.25 | SEVER: The UPS inverter abnormal. |
dupsInverterRecovered | .1.3.6.1.4.1.2254.2.4.20.0.26 | INFORMATION: Recovered from UPS inverter abnormal. |
dupsRectifierAbnormal | .1.3.6.1.4.1.2254.2.4.20.0.27 | SEVER: The UPS rectifier abnormal. |
dupsRectifierRecovered | .1.3.6.1.4.1.2254.2.4.20.0.28 | INFORMATION: The UPS recovered from rectifier abnormal. |
dupsReserveAbnormal | .1.3.6.1.4.1.2254.2.4.20.0.29 | SEVER: The UPS rectifier abnormal. |
dupsPowerFail | .1.3.6.1.4.1.2254.2.4.20.0.3 | WARNING: Power failed! The UPS is operating on battery power. |
dupsReserveRecovered | .1.3.6.1.4.1.2254.2.4.20.0.30 | INFORMATION: The UPS rectifier abnormal. |
dupsLoadOnReserve | .1.3.6.1.4.1.2254.2.4.20.0.31 | SEVER: The UPS load on reserve. |
dupsNoLongerLoadOnReserve | .1.3.6.1.4.1.2254.2.4.20.0.32 | INFORMATION: The UPS no longer load on reserve. |
dupsEnvOverAlarmTemperature | .1.3.6.1.4.1.2254.2.4.20.0.33 | SEVER: The environment over alarm temperature. |
dupsNoLongerEnvOverAlarmTemperature | .1.3.6.1.4.1.2254.2.4.20.0.34 | INFORMATION: The environment recovered from over alarm temperature. |
dupsEnvOverAlarmHumidity | .1.3.6.1.4.1.2254.2.4.20.0.35 | SEVER: The environment over alarm humidity. |
dupsNoLongerEnvOverAlarmHumidity | .1.3.6.1.4.1.2254.2.4.20.0.36 | INFORMATION: The environment recovered from over alarm humidity. |
dupsEnvRelay1Alarm | .1.3.6.1.4.1.2254.2.4.20.0.37 | INFORMATION: The environment relay1 is not in normal state. |
dupsEnvRelay1Normal | .1.3.6.1.4.1.2254.2.4.20.0.38 | INFORMATION: The environment relay1 is in normal state. |
dupsEnvRelay2Alarm | .1.3.6.1.4.1.2254.2.4.20.0.39 | INFORMATION: The environment relay2 is not in normal state. |
dupsPowerRestored | .1.3.6.1.4.1.2254.2.4.20.0.4 | INFORMATION: Power restored! The utility power restored. |
dupsEnvRelay2Normal | .1.3.6.1.4.1.2254.2.4.20.0.40 | INFORMATION: The environment relay2 is in normal state. |
dupsEnvRelay3Alarm | .1.3.6.1.4.1.2254.2.4.20.0.41 | INFORMATION: The environment relay3 is not in normal state. |
dupsEnvRelay3Normal | .1.3.6.1.4.1.2254.2.4.20.0.42 | INFORMATION: The environment relay3 is in normal state. |
dupsEnvRelay4Alarm | .1.3.6.1.4.1.2254.2.4.20.0.43 | INFORMATION: The environment relay4 is not in normal state. |
dupsEnvRelay4Normal | .1.3.6.1.4.1.2254.2.4.20.0.44 | INFORMATION: The environment relay4 is in normal state. |
dupsSmartShutdown | .1.3.6.1.4.1.2254.2.4.20.0.45 | SEVER: Smart Shutdown is initiated. |
dupsCancelShutdown | .1.3.6.1.4.1.2254.2.4.20.0.46 | INFORMATION: Cancel UPS Shutdown. |
dupsTestCompleted | .1.3.6.1.4.1.2254.2.4.20.0.47 | INFORMATION: This trap is sent upon completion of a UPS diagnostic test. |
dupsEPOON | .1.3.6.1.4.1.2254.2.4.20.0.48 | INFORMATION: This trap is sent when emergency power off is on. |
dupsEPOOFF | .1.3.6.1.4.1.2254.2.4.20.0.49 | INFORMATION: This trap is sent when UPS recover from emergency power off. |
dupsLowBattery | .1.3.6.1.4.1.2254.2.4.20.0.5 | SEVER: The UPS batteries are low and will soon be exhausted. |
dupsAlarmTemperature | .1.3.6.1.4.1.2254.2.4.20.0.50 | SEVER: This trap is sent when the UPS temperature out of range. |
dupsNormalTemperature | .1.3.6.1.4.1.2254.2.4.20.0.51 | INFORMATION: This trap is sent when UPS temperature back to normal. |
dupsBattReplace | .1.3.6.1.4.1.2254.2.4.20.0.52 | WARNING: The battery needs to be replaced. |
dupsReturnFromBattReplace | .1.3.6.1.4.1.2254.2.4.20.0.53 | INFORMATION: The UPS recovered from battery replacement. |
dupsEnvCommunicationLost | .1.3.6.1.4.1.2254.2.4.20.0.54 | WARNING: Communication with the environmental sensor failed. |
dupsEnvCommunicationEstablished | .1.3.6.1.4.1.2254.2.4.20.0.55 | INFORMATION: Communication with the environmental sensor reestablished. |
dupsEnvOverWarnTemperature | .1.3.6.1.4.1.2254.2.4.20.0.56 | WARNING: The environment over warning temperature. |
dupsNoLongerEnvOverWarnTemperature | .1.3.6.1.4.1.2254.2.4.20.0.57 | INFORMATION: The environment recovered from over warning temperature. |
dupsEnvOverWarnHumidity | .1.3.6.1.4.1.2254.2.4.20.0.58 | WARNING: The environment over warning humidity. |
dupsNoLongerEnvOverWarnHumidity | .1.3.6.1.4.1.2254.2.4.20.0.59 | INFORMATION: The environment recovered from over warning humidity. |
dupsReturnFromLowBattery | .1.3.6.1.4.1.2254.2.4.20.0.6 | INFORMATION: The UPS has returned from a low battery condition. |
dupsEconomyModeEnabled | .1.3.6.1.4.1.2254.2.4.20.0.60 | INFORMATION: The economy mode is enabled. |
dupsEconomyModeDisabled | .1.3.6.1.4.1.2254.2.4.20.0.61 | INFORMATION: The economy mode is disabled. |
dupsLoadWarning | .1.3.6.1.4.1.2254.2.4.20.0.7 | INFORMATION: Loading percent of the UPS over the Load Warning value. |
dupsNoLongerLoadWarning | .1.3.6.1.4.1.2254.2.4.20.0.8 | INFORMATION: Returnd from Load Warning condition. |
dupsLoadSeverity | .1.3.6.1.4.1.2254.2.4.20.0.9 | Warning: Loading percent of the UPS over the Load Severity value. |