dupsAlarmRedundancyLoss
DeltaUPS-MIB ·
.1.3.6.1.4.1.2254.2.4.9.30
Object
scalar
mandatory
Enumeration
To indicate the capacity of redundancy lost in a modular UPS.
Context
- MIB
- DeltaUPS-MIB
- OID
.1.3.6.1.4.1.2254.2.4.9.30- Type
- scalar
- Access
- readonly
- Status
- mandatory
- Parent
- dupsAlarm
- Siblings
- 29
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | off |
1 | on |
Object Constraints
range: 0-64
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dupsAlarmDisconnect mandatory Does the UPS disconnect? | scalar | Enumeration | .1.3.6.1.4.1.2254.2.4.9.1 |
| dupsAlarmBatteryTestFail mandatory Does the UPS test fail? | scalar | Enumeration | .1.3.6.1.4.1.2254.2.4.9.10 |
| dupsAlarmFuseFailure mandatory Does the UPS fuse failure? | scalar | Enumeration | .1.3.6.1.4.1.2254.2.4.9.11 |
| dupsAlarmOutputOverload mandatory Does the UPS output overload? | scalar | Enumeration | .1.3.6.1.4.1.2254.2.4.9.12 |
| dupsAlarmOutputOverCurrent mandatory Does the UPS output overcurrent? | scalar | Enumeration | .1.3.6.1.4.1.2254.2.4.9.13 |
| dupsAlarmInverterAbnormal mandatory Does the UPS inverter abnormal? | scalar | Enumeration | .1.3.6.1.4.1.2254.2.4.9.14 |
| dupsAlarmRectifierAbnormal mandatory Does the UPS rectifier abnormal? | scalar | Enumeration | .1.3.6.1.4.1.2254.2.4.9.15 |
| dupsAlarmReserveAbnormal mandatory Does the UPS reserve abnormal? | scalar | Enumeration | .1.3.6.1.4.1.2254.2.4.9.16 |
| dupsAlarmLoadOnReserve mandatory Does the UPS load on reserve? | scalar | Enumeration | .1.3.6.1.4.1.2254.2.4.9.17 |
| dupsAlarmTemperature SEVER: This trap is sent when the UPS temperature out of range. | notification | - | .1.3.6.1.4.1.2254.2.4.20.0.50 |
| dupsAlarmOutputBad mandatory Is the UPS output abnormal? | scalar | Enumeration | .1.3.6.1.4.1.2254.2.4.9.19 |
| dupsAlarmPowerFail mandatory Does the input power fail? | scalar | Enumeration | .1.3.6.1.4.1.2254.2.4.9.2 |
| dupsAlarmBypassBad mandatory Is the UPS bypass bad? | scalar | Enumeration | .1.3.6.1.4.1.2254.2.4.9.20 |
| dupsAlarmUPSOff mandatory Is the UPS in standby mode? | scalar | Enumeration | .1.3.6.1.4.1.2254.2.4.9.21 |
| dupsAlarmChargerFail mandatory Does the UPS charger fail? | scalar | Enumeration | .1.3.6.1.4.1.2254.2.4.9.22 |
| dupsAlarmFanFail mandatory Does the UPS fan fail? | scalar | Enumeration | .1.3.6.1.4.1.2254.2.4.9.23 |
| dupsAlarmEconomicMode mandatory Indicates whether the UPS is in the economic mode. | scalar | Enumeration | .1.3.6.1.4.1.2254.2.4.9.24 |
| dupsAlarmOutputOff mandatory Indicates whether the UPS output is turned off or not. | scalar | Enumeration | .1.3.6.1.4.1.2254.2.4.9.25 |
| dupsAlarmSmartShutdown mandatory Indicates whether the Smart Shutdown is in progress. | scalar | Enumeration | .1.3.6.1.4.1.2254.2.4.9.26 |
| dupsAlarmEmergencyPowerOff mandatory UPS emergency power off. | scalar | Enumeration | .1.3.6.1.4.1.2254.2.4.9.27 |
| dupsAlarmUPSShutdown mandatory UPS shutdown. | scalar | Enumeration | .1.3.6.1.4.1.2254.2.4.9.28 |
| dupsAlarmOutputBreaker mandatory Indicates the state of output breaker. | scalar | Enumeration | .1.3.6.1.4.1.2254.2.4.9.29 |
| dupsAlarmBatteryLow mandatory Are the UPS batteries low? | scalar | Enumeration | .1.3.6.1.4.1.2254.2.4.9.3 |
| dupsAlarmLoadWarning mandatory Does the UPS load percent over the load warning value? | scalar | Enumeration | .1.3.6.1.4.1.2254.2.4.9.4 |
| dupsAlarmLoadSeverity mandatory Does the UPS load percent over the load severity value? | scalar | Enumeration | .1.3.6.1.4.1.2254.2.4.9.5 |
| dupsAlarmLoadOnBypass mandatory Does the UPS load on bypass? | scalar | Enumeration | .1.3.6.1.4.1.2254.2.4.9.6 |
| dupsAlarmUPSFault mandatory Does the UPS general fail? | scalar | Enumeration | .1.3.6.1.4.1.2254.2.4.9.7 |
| dupsAlarmBatteryGroundFault mandatory Does the UPS battery ground fault? | scalar | Enumeration | .1.3.6.1.4.1.2254.2.4.9.8 |
| dupsAlarmTestInProgress mandatory Does the UPS test in progress? | scalar | Enumeration | .1.3.6.1.4.1.2254.2.4.9.9 |