Dell-IP Table View

This table is parralel to MIB II IpAddrTable, and is used to
add/delete entries to/from that table. In addition it contains
private objects.

rsIpAddrEntry row .1.3.6.1.4.1.89.26.1.1

The addressing information for one of this
entity's IP addresses.

Indexes

rsIpAdEntAddr

Column	Syntax	OID
rsIpAdEntAddr The IP address to which this entry's addressing information pertains.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.89.26.1.1.1
rsIpAdEntIfIndex The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.26.1.1.2
rsIpAdEntNetMask The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.89.26.1.1.3
rsIpAdEntForwardIpBroadcast This variable controls forwarding of IP (sub)net-directed broadcasts destined for an attached sub(net).	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.89.26.1.1.4
rsIpAdEntBackupAddr In case there are two IP routers in the domain, the address of the second IP router.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.89.26.1.1.5
rsIpAdEntStatus The validity of this entry. Invalid indicates that this entry is invalid in IpAddrTable (MIB II).	Enumerationr/w Enumerated Values: 1 valid 2 invalid	.1.3.6.1.4.1.89.26.1.1.6
rsIpAdEntBcastAddr Indicates how the host part of ip subnet broadcast messages will be filled: 0 - host part will be filled by 0 1 - host part will be filled by 1.	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.89.26.1.1.7
rsIpAdEntArpServer Indicates whether the router will reply to incoming ARP requests on this interface, providing the physical address corresponding to this IP interface.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.89.26.1.1.8
rsIpAdEntName The IP Interface name	SNMPv2-TCDisplayStringr/w Constraints: range: 0-30 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.89.26.1.1.9
rsIpAdEntOwner The IP Interface owner. Static if interface defined by user, dhcp if received by boot protocol like DHCP and internal for internal usage.	Enumerationr/w Enumerated Values: 1 static 2 dhcp 3 internal 4 default	.1.3.6.1.4.1.89.26.1.1.10
rsIpAdEntAdminStatus The IP Interface admin status.	Enumerationr/w Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.89.26.1.1.11
rsIpAdEntOperStatus If active the interface can be used to send and receive frames.	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.89.26.1.1.12
rsIpAdEntPrecedence The IP preference, to be selected as source IP for rsIpAdEntIfIndex. this source IP selection is first by preference value. if more than one IP has the same preference the one with the lowest IP is selected. (higher val…	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.89.26.1.1.13
rsIpAdEntUniqueStatus The IP address unique status defines IP address state in an assignment process and after duplication detection.	Enumeration Enumerated Values: 1 valid 2 validDuplicated 3 tentative 4 duplicated 5 delayed 6 notReceived	.1.3.6.1.4.1.89.26.1.1.14
rsIpAdEntIcmpRedirectSend Enables or disables sending of ICMP redirect messages to re-send a packet through the same interface on which the packet was received.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.89.26.1.1.15

This table contains ICMP Router Discovery parameters
configurated per IP interface.

rsIcmpRdEntry row .1.3.6.1.4.1.89.26.2.2.1

The ICMP parameters configurated for IP interface.

Indexes

rsIcmpRdIpAddr

Column	Syntax	OID
rsIcmpRdIpAddr The IP address to which this entry's information pertains.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.89.26.2.2.1.1
rsIcmpRdIpAdvertAddr The IP destination address to be used for multicast Router Advertisements sent from the interface. The only permissible values are the all-systems multicast address, 224.0.0.1, or the limited-broadcast address, 255.255.…	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.89.26.2.2.1.2
rsIcmpRdMaxAdvertInterval The maximum time allowed between sending multicast Router Advertisements from the interface, in seconds. Must be no less than 4 seconds and no greater than 1800 seconds.	Integer32r/w Constraints: range: 4-1800	.1.3.6.1.4.1.89.26.2.2.1.3
rsIcmpRdMinAdvertInterval The minimum time allowed between sending unsolicited multicast Router Advertisements from the interface, in seconds. Must be no less than 3 seconds and no greater than rsIcmpRdMaxAdvertInterval. Default: 0.75 * rsIcmpR…	Integer32r/w Constraints: range: 3-1800	.1.3.6.1.4.1.89.26.2.2.1.4
rsIcmpRdAdvertLifetime The maximum length of time that the advertised addresses are to be considered as valid. Must be no less than rsIcmpRdMaxAdvertInterval and no greater than 9000 seconds. Default: 3 * rsIcmpRdMaxAdvertInterval.	Integer32r/w Constraints: range: 4-9000	.1.3.6.1.4.1.89.26.2.2.1.5
rsIcmpRdAdvertise A flag indicating whether or not the address is to be advertised.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.89.26.2.2.1.6
rsIcmpRdPreferenceLevel The preferability of the address as a default router address, relative to other router addresses on the same subnet.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.26.2.2.1.7
rsIcmpRdEntStatus Setting of any value to this object set values of all fields to the default values.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.26.2.2.1.8

The table used for adding static ARP entries
without specifying Layer 2 interface.

rsArpStaticEntry row .1.3.6.1.4.1.89.26.4.9.1

Each entry contains one IpAddress to `physical' address equivalence.

Indexes

rsArpStaticIpAddress

Column	Syntax	OID
rsArpStaticIpAddress The IpAddress corresponding to the media-dependent `physical' address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.89.26.4.9.1.1
rsArpStaticPhysAddress The media-dependent `physical' address.	SNMPv2-TCPhysAddressr/w Description: Represents media- or physical-level addresses.	.1.3.6.1.4.1.89.26.4.9.1.2
rsArpStaticRowStatus Entry status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.26.4.9.1.3

L2 Interface specific configuration for ARP Application.
Entry in this table will be dynamically created,
when first IP Address is defined on specific L2 interface,
and destroyed when the last IP address on this L2 interface is removed

rsArpInterfaceEntry row .1.3.6.1.4.1.89.26.4.10.1

Each entry contains L2 Interface specific configuration
for ARP Application.

Indexes

rsArpInterfaceIfIndex

Column	Syntax	OID
rsArpInterfaceIfIndex The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB…	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.89.26.4.10.1.1
rsArpInterfaceInactiveTimeOut This variable defines the maximum time period (in second) that can pass between ARP requests concerning an entry in the ARP table. After this time period, the entry is deleted from the table. Default value 0 means using…	Unsigned32r/w Constraints: range: 0-40000000	.1.3.6.1.4.1.89.26.4.10.1.2
rsArpInterfaceArpProxy When ARP Proxy is enabled, the router can respond to ARP requests for nodes located on a different sub-net, provided they are it its network table. The router responds with its own MAC address. When ARP Proxy is disable…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.89.26.4.10.1.3

This table translates IP interfaces's name to
IP interface's address

rlTranslationNameToIpEntry row .1.3.6.1.4.1.89.26.12.1

The row definition for this table.

Indexes

rlTranslationNameToIpName

Column	Syntax	OID
rlTranslationNameToIpName The IP Interface name	SNMPv2-TCDisplayString Constraints: range: 1-30 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.89.26.12.1.1
rlTranslationNameToIpIpAddr The IP Interface address	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.89.26.12.1.2

Augmenting ipCidrRouteTable (ip forwarfing information table)
for added info as read only

rlIpCidrRouteExtEntry row .1.3.6.1.4.1.89.26.16.1

A row of the table ipCidrRouteTable Extended
by this definition.

Indexes

No indexes recorded

Column	Syntax	OID
rlIpCidrRouteProto Added infor for ipCidrRouteTable. extends the info of ipCidrRouteProto to show the route inner protocol. Allowes the user to see which type of route in the protocol e.g. ospf internal, ospf external.	Enumeration Enumerated Values: 1 local 2 netmgmt 3 rip 4 ospfInternal 5 ospfExternal 6 ospfAggregateNetRange 7 bgp4Internal 8 bgp4External 9 aggregateRoute 10 other	.1.3.6.1.4.1.89.26.16.1.1

This entity's    static (user configured) IP Routing table.
entries are MAX-ACCESSible even if not used for forwarding

rlIpStaticRouteEntry row .1.3.6.1.4.1.89.26.17.1.1

A particular Static(user configured) route to a particular destina-
tion, under a particular policy.

Indexes

rlIpStaticRouteDest rlIpStaticRouteMask rlIpStaticRouteTos rlIpStaticRouteNextHop

Column	Syntax	OID
rlIpStaticRouteDest The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bi…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.89.26.17.1.1.1
rlIpStaticRouteMask Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the rlIpStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent construc…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.89.26.17.1.1.2
rlIpStaticRouteTos See ipCidrRouteTos definition For now only value 0 is valid	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.26.17.1.1.3
rlIpStaticRouteNextHop On remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.89.26.17.1.1.4
rlIpStaticRouteMetric The routing metric for this route. The semantics of this metric are determined by the user. normal semantic will be next hop count or some administarative distance to create routing policy.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.26.17.1.1.5
rlIpStaticRouteType The type of route. Note that local(3) refers to a route for which the next hop is the final destination this is the case when user overides the a local interface entry to change it parameters; remote(4) refers to a …	Enumerationr/w Enumerated Values: 1 reject 2 local 3 remote	.1.3.6.1.4.1.89.26.17.1.1.6
rlIpStaticRouteNextHopAS The Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing-protocol specified in the route's ipCidrRouteProto value. When this object is unknown or not relevant its va…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.26.17.1.1.7
rlIpStaticRouteForwardingStatus active - An indication that the route has implication on routing inactive - the route is a backup route or it is down. It is not used in forwarding decision. Down means that the Ip interface on which it is co…	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.89.26.17.1.1.8
rlIpStaticRouteRowStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.26.17.1.1.9
rlIpStaticRouteOwner Static - The route is configured over Static IP. This route is written to configuration files. Dhcp - The route is Configured by DHCP (received as part of DHCP configuration) This route IS NOT written to configuration…	Enumeration Enumerated Values: 1 static 2 dhcp 3 default	.1.3.6.1.4.1.89.26.17.1.1.10

The table specifies IPv4 and IPv6 source 
interfaces per application. Only supported 
applications are present in the table.

rlSourceAddressSelectionEntry row .1.3.6.1.4.1.89.26.35.1

The row definition for this table.

Indexes

rlSourceAddressSelectionApp

Column	Syntax	OID
rlSourceAddressSelectionApp The application which source interfaces are defined in the entry.	SNMPv2-TCDisplayString Constraints: range: 1-160 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.89.26.35.1.1
rlSourceAddressSelectionInterfaceIPv4 The ifIndex value of source interface for IPv4 address. Zero means the interface is undefined.	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.89.26.35.1.2
rlSourceAddressSelectionInterfaceIPv6 The ifIndex value of source interface for IPv6 address. Zero means the interface is undefined.	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.89.26.35.1.3

This table is parralel to MIB II ipAddressTable, and is used to
add/delete entries to/from that table.
The table contains addressing information relevant to the
entity's interfaces.
          
In addition to ipAddressTable defined in standard MIB a represenattion of
IPv6 addresses based on additionl address origin such as EUI-64, general
prefix etc.
In this case the address information is partial address information.
Together with the address origin and the general prefix (when needed) user can
construct full address information.
          
The index (key) for this table includes this information additionally to the address.

rlIpAddressEntry row .1.3.6.1.4.1.89.26.36.1

An address mapping for a particular interface.

Indexes

rlIpAddressAddrType rlIpAddressAddr rlIpAddressOrigin rlIpAddressGeneralPrefixName

Column	Syntax	OID
rlIpAddressAddrType The address type of rlIpAddressAddr.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.89.26.36.1.1
rlIpAddressAddr The IP address to which this entry's addressing information pertains. The address type of this object is specified in rlIpAddressAddrType. In case of auto-configure address such as eui-64, general-prefix…	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.89.26.36.1.2
rlIpAddressOrigin The origin of the address.	RlIpAddressOriginTC Type Values: 1 other 2 manual 4 dhcp 5 linklayer 6 random 7 autoConfig 8 eui64 9 tunnelIsatap 10 tunnel6to4 11 generalPrefix Description: The origin of the address. following are same as ipAddressOriginTC in standard MIB: manual(2) indicates that the address was manually configured to a specified address, e.g., by user configuration.…	.1.3.6.1.4.1.89.26.36.1.3
rlIpAddressGeneralPrefixName The name assigned to the prefix.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.89.26.36.1.4
rlIpAddressIfIndex The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB…	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.89.26.36.1.5
rlIpAddressExtdType Extend standard field ipAddressType to multicast	Enumerationr/w Enumerated Values: 1 unicast 2 anycast 3 broadcast 4 multicast	.1.3.6.1.4.1.89.26.36.1.6
rlIpAddressPrefix A pointer to the row in the prefix table to which this address belongs. May be { 0 0 } if there is no such row.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.89.26.36.1.7
rlIpAddressStatus The status of the address, describing if the address can be used for communication. In the absence of other information, an IPv4 address is always preferred(1).	IP-MIBIpAddressStatusTCr/w Type Values: 1 preferred 2 deprecated 3 invalid 4 inaccessible 5 unknown 6 tentative 7 duplicate 8 optimistic	.1.3.6.1.4.1.89.26.36.1.8
rlIpAddressCreated The value of sysUpTime at the time this entry was created. If this entry was created prior to the last re- initialization of the local network management subsystem, then this object contains a zero value.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.89.26.36.1.9
rlIpAddressLastChanged The value of sysUpTime at the time this entry was last updated. If this entry was updated prior to the last re- initialization of the local network management subsystem, then this object contains a zero value.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.89.26.36.1.10
rlIpAddressRowStatus The status of this conceptual row. The RowStatus TC requires that this DESCRIPTION clause states under which circumstances other objects in this row can be modified. The value of this object has no effec…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.26.36.1.11
rlIpAddressStorageType The storage type for this conceptual row. If this object has a value of 'permanent', then no other objects are required to be able to be modified.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.89.26.36.1.12
rlIpAddressExtdPrefixLength The prefix length of this address.	INET-ADDRESS-MIBInetAddressPrefixLengthr/w Type Constraints: range: 0..2040	.1.3.6.1.4.1.89.26.36.1.13
rlIpAddressCompleteAddr The Complete IP address to which this entry's addressing information pertains. In case of auto-configure address such as eui-64, general-prefix and others it contains the complete address after appropriat…	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.89.26.36.1.14
rlIpAddressOperStatus The current operational state of the IP address.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.89.26.36.1.15