DSG-IF-STD-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
2
Rows
2
Columns
18
.1.3.6.1.4.1.4491.2.1.4.1.2.1 · 1 row entry · 16 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk dsgIfStdTunnelFilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DSG-IF-STD-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DSG-IF-STD-MIB::dsgIfStdTunnelFilterTable'
A Table with the DSG tunnels the DSG eCM is filtering 
and forwarding to the DSG Clients.
dsgIfStdTunnelFilterEntry row .1.3.6.1.4.1.4491.2.1.4.1.2.1.1
The DSG eCM will have one entry for each DSG Tunnel
Filter. A DSG eCM in Advanced mode will have at least one
such Filter for each DSG classifier, and at least one such
Filter for each DSG Tunnel that lacks a DSG classi…
Column Syntax OID
The unique index of entries in this table.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4491.2.1.4.1.2.1.1.1
The ID of the application to which this DSG Tunnel is to
be forwarded. This object returns -1 for: DSG Tunnels that
do not have an associated Application ID or for DSG Tunnels
for which the Application ID is unknown. In…
Integer32
Constraints:
range: -1-65535
.1.3.6.1.4.1.4491.2.1.4.1.2.1.1.2
The destination MAC Address associated with this
tunnel entry.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.4491.2.1.4.1.2.1.1.3
The type of InetAddress for dsgIfStdTunnelFilterSrcIpAddr,
dsgIfStdTunnelFilterSrcIpMask and
dsgIfStdTunnelFilterDestIpAddr.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.4491.2.1.4.1.2.1.1.4
The source IP Address associated to this tunnel for the
DSG eCM filtering and forwarding process. A value of zero
indicates that source IP Address filtering does not apply.
The type of this address is determined by the …
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4491.2.1.4.1.2.1.1.5
The Source IP Mask to be used along with
dsgIfStdTunnelFilterSrcIpAddr for filtering
and forwarding of DSG Tunnel traffic.
The type of this address is determined by the value of the
dsgIfStdTunnelFilterIpAddressType ob…
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4491.2.1.4.1.2.1.1.6
The destination IP Address associated to this tunnel for
the DSG eCM filtering and forwarding process. A value of
zero indicates that destination IP Address filtering does
not apply. The type of this address is determi…
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4491.2.1.4.1.2.1.1.7
The lower UDP port value to be matched for this tunnel.
INET-ADDRESS-MIBInetPortNumber
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.4491.2.1.4.1.2.1.1.8
The upper UDP port value to be matched for this tunnel.
INET-ADDRESS-MIBInetPortNumber
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.4491.2.1.4.1.2.1.1.9
The total number of Packets being classified and filtered
for this tunnel entry since creation of the entry.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4491.2.1.4.1.2.1.1.10
The total number of octets being classified and filtered
for this tunnel entry since creation of the entry.
octetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4491.2.1.4.1.2.1.1.11
The total number of seconds that this tunnel entry has
been instantiated.
secondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4491.2.1.4.1.2.1.1.12
In DSG Advanced Mode, this is the tunnel identifier passed
to the DSG eCM by the DSG-Client Controller for this Tunnel
Filter entry. This value may correspond to the DSG Rule ID
from the DCD message.
Unsigned32
Constraints:
range: 0-255
.1.3.6.1.4.1.4491.2.1.4.1.2.1.1.13
When operating with Multicast DSID Forwarding (MDF)
enabled, this object contains the DSID value obtained
from the DA-to-DSID TLV in the MDD. If no DSID has been advertised
for this tunnel MAC address then this…
DOCS-IF3-MIBDsid
Type Constraints:
range: 0..1048575
.1.3.6.1.4.1.4491.2.1.4.1.2.1.1.14
The Client Identification type. The value of cableCard(0)
describes a filter requested by the CableCARD on an OpenCable
Host. A DSG client id of type broadcast(1) describes a filter
for an industry standard flow identi…
Enumeration
Enumerated Values:
0cableCard
1broadcast
2macAddress
3caSystemId
4applicationId
.1.3.6.1.4.1.4491.2.1.4.1.2.1.1.15
The Client Identification Value. The content depends on
the value of the dsgIfStdTunnelFilterClientIdType.
For dsgIfStdTunnelFilterClientIdType of type cableCard(0),
this object will return the empty (i.e., zero length…
OctetString
Constraints:
range: 6-6
.1.3.6.1.4.1.4491.2.1.4.1.2.1.1.16
.1.3.6.1.4.1.4491.2.1.4.1.3.1 · 1 row entry · 2 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk dsgIfStdDsgChannelListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DSG-IF-STD-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DSG-IF-STD-MIB::dsgIfStdDsgChannelListTable'
This table contains the list of DSG channels provided to
the DSG eCM for use in scanning.
dsgIfStdDsgChannelListEntry row .1.3.6.1.4.1.4491.2.1.4.1.3.1.1
The conceptual row for this table. The DSG eCM
creates an entry per each downstream channel provided in
the DCD message. An entry is deleted when removed from the
DCD message.
Column Syntax OID
The unique identifier for entries in this table
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4491.2.1.4.1.3.1.1.1
The downstream channel center frequency of this entry.
HertzSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4491.2.1.4.1.3.1.1.2