DSG-IF-STD-MIB
This MIB module provides the management objects of
the DOCSIS Set-top Gateway (DSG) client controller
CM component for DSG operations of Set-top devices.
Copyright 1999-2008 Cable Television Laboratories, Inc.
All rights reserved.
- Source file
DSG-IF-STD-MIB- Last revised
- Identity
dsgIfStdMib- Base OID
1.3.6.1.4.1.4491.2.1.4
Imported Objects
| CLAB-DEF-MIB | clabProjDocsis |
| DOCS-CABLE-DEVICE-MIB | docsDevEvId docsDevEvLevel docsDevEvText |
| DOCS-IF-MIB | docsIfCmCmtsAddress docsIfCmStatusDocsisOperMode docsIfCmStatusModulationType docsIfDocsisBaseCapability |
| DOCS-IF3-MIB | Dsid |
| IF-MIB | ifPhysAddress |
| INET-ADDRESS-MIB | InetAddress InetAddressPrefixLength InetAddressType InetPortNumber |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | MacAddress |
Net-SNMP examples using the arris MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'DSG-IF-STD-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'DSG-IF-STD-MIB::dsgIfStdMib'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DSG-IF-STD-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DSG-IF-STD-MIB::dsgIfStdMib'
Objects (41)
Showing 41 of 41 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.4491.2.1.4 |
||
.1.3.6.1.4.1.4491.2.1.4.0 |
||
.1.3.6.1.4.1.4491.2.1.4.1 |
||
.1.3.6.1.4.1.4491.2.1.4.1.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.4491.2.1.4.1.1.1 |
|
|
Enumeration
|
.1.3.6.1.4.1.4491.2.1.4.1.1.10 |
|
|
secondsSNMPv2-SMIUnsigned32
|
.1.3.6.1.4.1.4491.2.1.4.1.1.2 |
|
|
secondsSNMPv2-SMIUnsigned32
|
.1.3.6.1.4.1.4491.2.1.4.1.1.3 |
|
|
secondsSNMPv2-SMIUnsigned32
|
.1.3.6.1.4.1.4491.2.1.4.1.1.4 |
|
|
secondsSNMPv2-SMIUnsigned32
|
.1.3.6.1.4.1.4491.2.1.4.1.1.5 |
|
.1.3.6.1.4.1.4491.2.1.4.1.1.6 |
||
.1.3.6.1.4.1.4491.2.1.4.1.1.7 |
||
.1.3.6.1.4.1.4491.2.1.4.1.1.8 |
||
.1.3.6.1.4.1.4491.2.1.4.1.1.9 |
||
.1.3.6.1.4.1.4491.2.1.4.1.2 |
||
.1.3.6.1.4.1.4491.2.1.4.1.2.1 |
||
.1.3.6.1.4.1.4491.2.1.4.1.2.1.1 |
||
.1.3.6.1.4.1.4491.2.1.4.1.2.1.1.1 |
||
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.4491.2.1.4.1.2.1.1.10 |
|
|
octetsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.4491.2.1.4.1.2.1.1.11 |
|
|
secondsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.4491.2.1.4.1.2.1.1.12 |
|
|
Unsigned32
|
.1.3.6.1.4.1.4491.2.1.4.1.2.1.1.13 |
|
.1.3.6.1.4.1.4491.2.1.4.1.2.1.1.14 |
||
|
Enumeration
|
.1.3.6.1.4.1.4491.2.1.4.1.2.1.1.15 |
|
|
OctetString
|
.1.3.6.1.4.1.4491.2.1.4.1.2.1.1.16 |
|
|
|
Integer32
|
.1.3.6.1.4.1.4491.2.1.4.1.2.1.1.2 |
.1.3.6.1.4.1.4491.2.1.4.1.2.1.1.3 |
||
.1.3.6.1.4.1.4491.2.1.4.1.2.1.1.4 |
||
.1.3.6.1.4.1.4491.2.1.4.1.2.1.1.5 |
||
.1.3.6.1.4.1.4491.2.1.4.1.2.1.1.6 |
||
.1.3.6.1.4.1.4491.2.1.4.1.2.1.1.7 |
||
.1.3.6.1.4.1.4491.2.1.4.1.2.1.1.8 |
||
.1.3.6.1.4.1.4491.2.1.4.1.2.1.1.9 |
||
.1.3.6.1.4.1.4491.2.1.4.1.3 |
||
.1.3.6.1.4.1.4491.2.1.4.1.3.1 |
||
.1.3.6.1.4.1.4491.2.1.4.1.3.1.1 |
||
.1.3.6.1.4.1.4491.2.1.4.1.3.1.1.1 |
||
|
HertzSNMPv2-SMIUnsigned32
|
.1.3.6.1.4.1.4491.2.1.4.1.3.1.1.2 |
|
.1.3.6.1.4.1.4491.2.1.4.2 |
||
.1.3.6.1.4.1.4491.2.1.4.2.1 |
||
.1.3.6.1.4.1.4491.2.1.4.2.2 |
Dependencies (25) 9 direct · 16 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- INET-ADDRESS-MIBrfc
- SNMP-FRAMEWORK-MIBrfc
- DOCS-IETF-BPI2-MIBrfc
- CLAB-DEF-MIBrfc
- DIFFSERV-DSCP-TCrfc
- INTEGRATED-SERVICES-MIBrfc
- DIFFSERV-MIBrfc
- RMON-MIBrfc
- RFC-1212rfc
- RFC1155-SMIrfc
- RFC1213-MIBrfc
- RFC1271-MIBrfc
- TOKEN-RING-RMON-MIBrfc
- RMON2-MIBrfc
- DOCS-CABLE-DEVICE-MIBrfc
- DOCS-IF-MIBrfc
- CLAB-TOPO-MIBrfc
- SNMP-TARGET-MIBrfc
- DOCS-IF3-MIBrfc
- DSG-IF-STD-MIBarrisselected
Conformance Groups (2)
|
dsgIfStdDsgMode dsgIfStdTdsg1 dsgIfStdTdsg2 dsgIfStdTdsg3 dsgIfStdTdsg4 dsgIfStdTdsg1Timeouts dsgIfStdTdsg2Timeouts dsgIfStdTdsg3Timeouts dsgIfStdTdsg4Timeouts dsgIfStdOneWayRecovery dsgIfStdTunnelFilterMacAddress dsgIfStdTunnelFilterIpAddressType dsgIfStdTunnelFilterSrcIpAddr dsgIfStdTunnelFilterSrcIpMask dsgIfStdTunnelFilterDestIpAddr dsgIfStdTunnelFilterDestPortStart dsgIfStdTunnelFilterDestPortEnd dsgIfStdTunnelFilterPkts dsgIfStdTunnelFilterOctets dsgIfStdTunnelFilterTimeActive dsgIfStdTunnelFilterTunnelId dsgIfStdTunnelFilterDsid dsgIfStdTunnelFilterClientIdType dsgIfStdTunnelFilterClientIdValue dsgIfStdDsgChannelListFrequency
A collection of configuration elements provided in DCD
messages and DSG operations. |
.1.3.6.1.4.1.4491.2.1.4.2.2.1
|
|
|
The collection of DSG notifications that the eCM reports
as part of the Set-top device |
.1.3.6.1.4.1.4491.2.1.4.2.2.2
|
Compliance Statements (1)
OID
.1.3.6.1.4.1.4491.2.1.4.2.1.1The compliance statement for DOCSIS Set-top Gateway eCMs.
Required groups
| mandatory | dsgIfStdConfigGroup | |
| mandatory | dsgIfStdNotifyGroup |
Notifications / Traps (3)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.4.1.4491.2.1.4.0.1 |
Indicates the eCM is being instructed to have the upstream
transmitter enabled. This notification is send after CM registration. Note that the objects docsIfDocsisBaseCapability, docsIfCmStatusDocsisOperMode and docsIfCmStatusModulationType may not be supported in some situations (e.g., for 1.1 CMs in 1.0 mode these objects are optional, for 3.0 CMs docsIfCmStatusDocsisOperMode and docsIfCmStatusModulationType are deprecated). If that is the case, the above varbind objects are indicated as noSuchName or noSuchObject for SNMPv1 and SNMPv2 notification PDUs respectively. |
|
.1.3.6.1.4.1.4491.2.1.4.0.2 |
Indicates the CM is being instructed to have the upstream
transmitter disabled. This notification is only send when the CM is registered and prior to disable the upstream transmitter. Note that the objects docsIfDocsisBaseCapability, docsIfCmStatusDocsisOperMode and docsIfCmStatusModulationType may not be supported in some situations (e.g., for 1.1 CMs in 1.0 mode these objects are optional, for 3.0 CMs docsIfCmStatusDocsisOperMode and docsIfCmStatusModulationType are deprecated). If that is the case the above varbind objects are indicated as noSuchName or noSuchObject for SNMPv1 and SNMPv2 notification PDUs respectively. |
|
.1.3.6.1.4.1.4491.2.1.4.0.3 |
Notifies that the eCM has a timeout Tdsg2.
Note that the objects docsIfDocsisBaseCapability, docsIfCmStatusDocsisOperMode and docsIfCmStatusModulationType may not be supported in some situations (e.g., for 1.1 CMs in 1.0 mode these objects are optional, for 3.0 CMs docsIfCmStatusDocsisOperMode and docsIfCmStatusModulationType are deprecated). If that is the case the above varbind objects are indicated as noSuchName or noSuchObject for SNMPv1 and SNMPv2 notification PDUs respectively. |