DOCS-QOS-MIB Table View

This table describes the packet classification
configured on the CM or CMTS.
The model is that a packet either received
as input from an interface or transmitted
for output on an interface may be compared
against an ordered list of rules pertaining to
the packet contents. Each rule is a row of this
table. A matching rule provides a service flow
id to to which the packet is classified.
All rules need to match for a packet to match
a classifier.
          
The objects in this row correspond to a set of
Classifier Encoding parameters in a DOCSIS
MAC management message. The docsQosPktClassBitMap
indicates which particular parameters were present
in the classifier as signalled in the DOCSIS message.
If the referenced parameter was not present
in the signalled DOCSIS 1.1 Classifier, the
corresponding object in this row reports a
value as specified in the DESCRIPTION section.

docsQosPktClassEntry row .1.3.6.1.2.1.10.127.7.1.1.1

An entry in this table provides a single packet
classifier rule. The index ifIndex is an ifType
of docsCableMaclayer(127).

Indexes

IF-MIBifIndex docsQosServiceFlowId docsQosPktClassId

Column	Syntax	OID
docsQosPktClassId Index assigned to packet classifier entry by the CMTS which is unique per service flow.	Integer32 Constraints: range: 1-65535	.1.3.6.1.2.1.10.127.7.1.1.1.1
docsQosPktClassDirection Indicates the direction to which the classifier is applied.	IfDirection Type Values: 1 downstream 2 upstream	.1.3.6.1.2.1.10.127.7.1.1.1.2
docsQosPktClassPriority The value specifies the order of evaluation of the classifiers. The higher the value the higher the priority. The value of 0 is used as default in provisioned service flows classifiers. The default value of 64 is used f…	Integer32 Constraints: range: 0-255	.1.3.6.1.2.1.10.127.7.1.1.1.3
docsQosPktClassIpTosLow The low value of a range of TOS byte values. If the referenced parameter is not present in a classifier, this object reports the value of 0.	OctetString Constraints: range: 1-1	.1.3.6.1.2.1.10.127.7.1.1.1.4
docsQosPktClassIpTosHigh The 8-bit high value of a range of TOS byte values. If the referenced parameter is not present in a classifier, this object reports the value of 0.	OctetString Constraints: range: 1-1	.1.3.6.1.2.1.10.127.7.1.1.1.5
docsQosPktClassIpTosMask The mask value is bitwise ANDed with TOS byte in an IP packet and this value is used check range checking of TosLow and TosHigh. If the referenced parameter is not present in a classifier, this object rep…	OctetString Constraints: range: 1-1	.1.3.6.1.2.1.10.127.7.1.1.1.6
docsQosPktClassIpProtocol This object indicates the value of the IP Protocol field required for IP packets to match this rule. The value 256 matches traffic with any IP Protocol value. The value 257 by convention matches both TCP …	Integer32 Constraints: range: 0-258	.1.3.6.1.2.1.10.127.7.1.1.1.7
docsQosPktClassIpSourceAddrdeprecated This object is deprecated in favor of the object pair docsQosPktClassInetSourceAddrType and docsQosPktClassInetSourceAddr. Agents that choose to implement this object MUST report an address that matches docsQosPktClassI…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.2.1.10.127.7.1.1.1.8
docsQosPktClassIpSourceMaskdeprecated This object is deprecated in favor of the object pair docsQosPktClassInetSourceMaskType and docsQosPktClassInetSourceMask. Agents that choose to implement this object MUST report an address that matches docsQosPktClassI…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.2.1.10.127.7.1.1.1.9
docsQosPktClassIpDestAddrdeprecated This object is deprecated in favor of the object pair docsQosPktClassInetDestAddrType and docsQosPktClassInetDestAddr. Agents that choose to implement this object MUST report an address that matches docsQosPktClassInetD…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.2.1.10.127.7.1.1.1.10
docsQosPktClassIpDestMaskdeprecated This object is deprecated in favor of the object pair docsQosPktClassInetDestMaskType and docsQosPktClassInetDestMask. Agents that choose to implement this object MUST report an address that matches docsQosPktClassInetD…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.2.1.10.127.7.1.1.1.11
docsQosPktClassSourcePortStart This object specifies the low end inclusive range of TCP/UDP source port numbers to which a packet is compared. This object is irrelevant for non-TCP/UDP IP packets. If the referenced parameter is not pre…	Integer32 Constraints: range: 0-65535	.1.3.6.1.2.1.10.127.7.1.1.1.12
docsQosPktClassSourcePortEnd This object specifies the high end inclusive range of TCP/UDP source port numbers to which a packet is compared. This object is irrelevant for non-TCP/UDP IP packets. If the referenced parameter is not pr…	Integer32 Constraints: range: 0-65535	.1.3.6.1.2.1.10.127.7.1.1.1.13
docsQosPktClassDestPortStart This object specifies the low end inclusive range of TCP/UDP destination port numbers to which a packet is compared. If the referenced parameter is not present in a classifier, this object reports the val…	Integer32 Constraints: range: 0-65535	.1.3.6.1.2.1.10.127.7.1.1.1.14
docsQosPktClassDestPortEnd This object specifies the high end inclusive range of TCP/UDP destination port numbers to which a packet is compared. If the referenced parameter is not present in a classifier, this object reports the va…	Integer32 Constraints: range: 0-65535	.1.3.6.1.2.1.10.127.7.1.1.1.15
docsQosPktClassDestMacAddr An Ethernet packet matches an entry when its destination MAC address bitwise ANDed with docsQosPktClassDestMacMask equals the value of docsQosPktClassDestMacAddr. If the referenced paramete…	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.2.1.10.127.7.1.1.1.16
docsQosPktClassDestMacMask An Ethernet packet matches an entry when its destination MAC address bitwise ANDed with docsQosPktClassDestMacMask equals the value of docsQosPktClassDestMacAddr. If the referenced parameter is not presen…	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.2.1.10.127.7.1.1.1.17
docsQosPktClassSourceMacAddr An Ethernet packet matches this entry when its source MAC address equals the value of this object. If the referenced parameter is not present in a classifier, this object reports the value of 'FFFFFFFFFFF…	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.2.1.10.127.7.1.1.1.18
docsQosPktClassEnetProtocolType This object indicates the format of the layer 3 protocol id in the Ethernet packet. A value of none(0) means that the rule does not use the layer 3 protocol type as a matching criteria. A value of etherty…	Enumeration Enumerated Values: 0 none 1 ethertype 2 dsap 3 mac 4 all	.1.3.6.1.2.1.10.127.7.1.1.1.19
docsQosPktClassEnetProtocol If docsQosEthPktClassProtocolType is none(0), this object is ignored when considering whether a packet matches the current rule. If dosQosPktClassEnetProtocolType is ethertype(1), this object gives the 16…	Integer32 Constraints: range: 0-65535	.1.3.6.1.2.1.10.127.7.1.1.1.20
docsQosPktClassUserPriAppliesobsolete This object is obsolete.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.10.127.7.1.1.1.21
docsQosPktClassUserPriLow This object applies only to Ethernet frames using the 802.1P/Q tag header (indicated with EtherType 0x8100). Such frames include a 16-bit Tag that contains a 3 bit Priority field and a 12 bit VLAN number. …	Integer32 Constraints: range: 0-7	.1.3.6.1.2.1.10.127.7.1.1.1.22
docsQosPktClassUserPriHigh This object applies only to Ethernet frames using the 802.1P/Qtag header (indicated with EtherType 0x8100). Such frames include a 16-bit Tag that contains a 3 bit Priority field and a 12 bit VLAN number. …	Integer32 Constraints: range: 0-7	.1.3.6.1.2.1.10.127.7.1.1.1.23
docsQosPktClassVlanId This object applies only to Ethernet frames using the 802.1P/Q tag header. If this object's value is nonzero, tagged packets must have a VLAN Identifier that matches the value in order to match the rule. …	Integer32 Constraints: range: 0-4095	.1.3.6.1.2.1.10.127.7.1.1.1.24
docsQosPktClassState This object indicates whether or not the classifier is enabled to classify packets to a Service Flow. If the referenced parameter is not present in the classifier, the value of this object is reported as …	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.2.1.10.127.7.1.1.1.25
docsQosPktClassPkts This object counts the number of packets that have been classified using this entry.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.1.1.26
docsQosPktClassBitMap This object indicates which parameter encodings were actually present in the DOCSIS packet classifier encoding signaled in the DOCSIS message that created or modified the classifier. Note that Dynamic Service Change mes…	Bits Enumerated Values: 0 rulePriority 1 activationState 2 ipTos 3 ipProtocol 4 ipSourceAddr 5 ipSourceMask 6 ipDestAddr 7 ipDestMask 8 sourcePortStart 9 sourcePortEnd 10 destPortStart 11 destPortEnd 12 destMac 13 sourceMac 14 ethertype 15 userPri 16 vlanId	.1.3.6.1.2.1.10.127.7.1.1.1.27
docsQosPktClassInetSourceAddrType The type of the internet address for docsQosPktClassInetSourceAddr. This type must be the same as the docsQosPktClassInetSourceMaskType. If the referenced parameter is not present in a classifier, this ob…	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.2.1.10.127.7.1.1.1.28
docsQosPktClassInetSourceAddr This object specifies the value of the IP Source Address required for packets to match this rule. An IP packet matches the rule when the packet ip source address bitwise ANDed with the docsQosPktClassInetSourceMask valu…	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.2.1.10.127.7.1.1.1.29
docsQosPktClassInetSourceMaskType The type of the internet address for docsQosPktClassInetSourceMask. This type must be the same as the docsQosPktClassInetSourceAddrType. If the referenced parameter is not present in a classifier, this ob…	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.2.1.10.127.7.1.1.1.30
docsQosPktClassInetSourceMask This object specifies which bits of a packet's IP Source Address that are compared to match this rule. An IP packet matches the rule when the packet source address bitwise ANDed with the docsQosPktClassInetSourceMask va…	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.2.1.10.127.7.1.1.1.31
docsQosPktClassInetDestAddrType The type of the internet address for docsQosPktClassInetDestAddr. This type must be the same as the docsQosPktClassInetDestMaskType. If the referenced parameter is not present in a classifier, this object…	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.2.1.10.127.7.1.1.1.32
docsQosPktClassInetDestAddr This object specifies the value of the IP Destination Address required for packets to match this rule. An IP packet matches the rule when the packet ip destination address bitwise ANDed with the docsQosPktClassInetDestM…	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.2.1.10.127.7.1.1.1.33
docsQosPktClassInetDestMaskType The type of the internet address for docsQosPktClassInetDestMask. This type must be the same as the docsQosPktClassInetDestAddrType. If the referenced parameter is not present in a classifier, this object…	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.2.1.10.127.7.1.1.1.34
docsQosPktClassInetDestMask This object specifies which bits of a packet's IP Destination Address that are compared to match this rule. An IP packet matches the rule when the packet destination address bitwise ANDed with the docsQosPktClassInetDes…	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.2.1.10.127.7.1.1.1.35

This table describes the set of DOCSIS 1.1 QOS
parameters defined in a managed device.
          
The ifIndex index specifies a DOCSIS MAC Domain.
The docsQosServiceFlowId index specifies a particular
Service Flow.
The docsQosParamSetType index indicates whether
the active, admitted, or provisioned QOS Parameter
Set is being described by the row.
          
Only the QOS Parameter Sets of Docsis 1.1 service
flows are represented in this table.  Docsis 1.0
QOS service profiles are not represented in this
table.
          
Each row corresponds to a DOCSIS QOS Parameter Set
as signaled via DOCSIS MAC management messages.
Each object in the row corresponds to one or
part of one DOCSIS 1.1 Service Flow Encoding.
The docsQosParamSetBitMap object in the row indicates
which particular parameters were signalled in
the original registration or dynamic service
request message that created the QOS Parameter Set.
          
In many cases, even if a QOS Parameter Set parameter
was not signalled, the DOCSIS specification calls
for a default value to be used. That default value
is reported as the value of the corresponding object
in this row.
          
Many objects are not applicable depending on
the service flow direction or upstream scheduling
type.  The object value reported in this case
is specified in the DESCRIPTION clause.

docsQosParamSetEntry row .1.3.6.1.2.1.10.127.7.1.2.1

A unique set of QOS parameters.

Indexes

IF-MIBifIndex docsQosServiceFlowId docsQosParamSetType

Column	Syntax	OID
docsQosParamSetServiceClassName Refers to the Service Class Name that the parameter set values were derived. If the referenced parameter is not present in the corresponding DOCSIS QOS Parameter Set, the default value of this object is a…	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.2.1.10.127.7.1.2.1.4
docsQosParamSetPriority The relative priority of a service flow. Higher numbers indicate higher priority. This priority should only be used to differentiate service flow with identical parameter sets. If the referenced parameter…	Integer32 Constraints: range: 0-7	.1.3.6.1.2.1.10.127.7.1.2.1.5
docsQosParamSetMaxTrafficRate Maximum sustained traffic rate allowed for this service flow in bits/sec. Must count all MAC frame data PDU from the bytes following the MAC header HCS to the end of the CRC. The number of bytes forwarded is limited dur…	BitRate	.1.3.6.1.2.1.10.127.7.1.2.1.6
docsQosParamSetMaxTrafficBurst Specifies the token bucket size in bytes for this parameter set. The value is calculated from the byte following the MAC header HCS to the end of the CRC. This object is applied in conjunction with docsQosParamSetMaxTra…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.2.1.7
docsQosParamSetMinReservedRate Specifies the guaranteed minimum rate in bits/sec for this parameter set. The value is calculated from the byte following the MAC header HCS to the end of the CRC. The default value of 0 has the meaning that no bandwidt…	BitRate	.1.3.6.1.2.1.10.127.7.1.2.1.8
docsQosParamSetMinReservedPkt Specifies an assumed minimum packet size in bytes for which the docsQosParamSetMinReservedRate will be provided. The value is calculated from the byte following the MAC header HCS to the end of the CRC. I…	Integer32 Constraints: range: 0-65535	.1.3.6.1.2.1.10.127.7.1.2.1.9
docsQosParamSetActiveTimeout Specifies the maximum duration in seconds that resources remain unused on an active service flow before CMTS signals that both active and admitted parameters set are null. The default value of 0 signifies an infinite am…	secondsInteger32 Constraints: range: 0-65535	.1.3.6.1.2.1.10.127.7.1.2.1.10
docsQosParamSetAdmittedTimeout Specifies the maximum duration in seconds that resources remain in admitted state before resources must be released. The value of 0 signifies an infinite amount of time. If the referenced parameter is not…	secondsInteger32 Constraints: range: 0-65535	.1.3.6.1.2.1.10.127.7.1.2.1.11
docsQosParamSetMaxConcatBurst Specifies the maximum concatenated burst in bytes which an upstream service flow is allowed. The value is calculated from the FC byte of the Concatenation MAC Header to the last CRC byte in of the last concatenated MAC…	Integer32 Constraints: range: 0-65535	.1.3.6.1.2.1.10.127.7.1.2.1.12
docsQosParamSetSchedulingType Specifies the upstream scheduling service used for upstream service flow. If the referenced parameter is not present in the corresponding DOCSIS QOS Parameter Set of an upstream service flow, the default …	SchedulingType Type Values: 1 undefined 2 bestEffort 3 nonRealTimePollingService 4 realTimePollingService 5 unsolictedGrantServiceWithAD 6 unsolictedGrantService	.1.3.6.1.2.1.10.127.7.1.2.1.13
docsQosParamSetNomPollInterval Specifies the nominal interval in microseconds between successive unicast request opportunities on an upstream service flow. This object applies only to upstream service flows with schedulingType of value…	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.2.1.15
docsQosParamSetTolPollJitter Specifies the maximum amount of time in microseconds that the unicast request interval may be delayed from the nominal periodic schedule on an upstream service flow. This parameter is applicable only to u…	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.2.1.16
docsQosParamSetUnsolicitGrantSize Specifies the unsolicited grant size in bytes. The grant size includes the entire MAC frame data PDU from the Frame Control byte to end of the MAC frame. The referenced parameter is applicable only for up…	Integer32 Constraints: range: 0-65535	.1.3.6.1.2.1.10.127.7.1.2.1.17
docsQosParamSetNomGrantInterval Specifies the nominal interval in microseconds between successive data grant opportunities on an upstream service flow. The referenced parameter is applicable only for upstream flows with a SchedulingType…	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.2.1.18
docsQosParamSetTolGrantJitter Specifies the maximum amount of time in microseconds that the transmission opportunities may be delayed from the nominal periodic schedule. The referenced parameter is applicable only for upstream flows w…	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.2.1.19
docsQosParamSetGrantsPerInterval Specifies the number of data grants per Nominal Grant Interval (docsQosParamSetNomGrantInterval). The referenced parameter is applicable only for upstream flows with a SchedulingType of of unsolicitedGran…	Integer32 Constraints: range: 0-127	.1.3.6.1.2.1.10.127.7.1.2.1.20
docsQosParamSetTosAndMask Specifies the AND mask for IP TOS byte for overwriting IP packets TOS value. The IP packets TOS byte is bitwise ANDed with docsQosParamSetTosAndMask and result is bitwise ORed with docsQosParamSetTosORMask and result i…	OctetString Constraints: range: 1-1	.1.3.6.1.2.1.10.127.7.1.2.1.21
docsQosParamSetTosOrMask Specifies the OR mask for IP TOS byte. See the description of docsQosParamSetTosAndMask for further details.	OctetString Constraints: range: 1-1	.1.3.6.1.2.1.10.127.7.1.2.1.22
docsQosParamSetMaxLatency Specifies the maximum latency between the reception of a packet by the CMTS on its NSI and the forwarding of the packet to the RF interface. A value of 0 signifies no maximum latency enforced. This object only applies t…	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.2.1.23
docsQosParamSetType Defines the type of the QOS parameter set defined by this row. active(1) indicates the Active QOS parameter set, describing the service currently being provided by the Docsis MAC domain to the service flow. admitted(2) …	Enumeration Enumerated Values: 1 active 2 admitted 3 provisioned	.1.3.6.1.2.1.10.127.7.1.2.1.24
docsQosParamSetRequestPolicyOct Specifies which transmit interval opportunities the CM omits for upstream transmission requests and packet transmissions. This object takes its default value for downstream service flows. Unless otherwise…	OctetString Constraints: range: 4-4	.1.3.6.1.2.1.10.127.7.1.2.1.25
docsQosParamSetBitMap This object indicates the set of QOS Parameter Set parameters actually signaled in the DOCSIS registration or dynamic service request message that created or modified the QOS Parameter Set. A bit is set to 1 when the pa…	Bits Enumerated Values: 0 trafficPriority 1 maxTrafficRate 2 maxTrafficBurst 3 minReservedRate 4 minReservedPkt 5 activeTimeout 6 admittedTimeout 7 maxConcatBurst 8 schedulingType 9 requestPolicy 10 nomPollInterval 11 tolPollJitter 12 unsolicitGrantSize 13 nomGrantInterval 14 tolGrantJitter 15 grantsPerInterval 16 tosOverwrite 17 maxLatency	.1.3.6.1.2.1.10.127.7.1.2.1.26

This table describes the set of Docsis-QOS
Service Flows in a managed device.

docsQosServiceFlowEntry row .1.3.6.1.2.1.10.127.7.1.3.1

Describes a service flow.
An entry in the table exists for each
Service Flow ID. The ifIndex is an
ifType of docsCableMaclayer(127).

Indexes

IF-MIBifIndex docsQosServiceFlowId

Column	Syntax	OID
docsQosServiceFlowId An index assigned to a service flow by CMTS.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.2.1.10.127.7.1.3.1.1
docsQosServiceFlowProvisionedParamSetIndexobsolete This object is obsolete.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.2.1.10.127.7.1.3.1.3
docsQosServiceFlowAdmittedParamSetIndexobsolete This object is obsolete.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.2.1.10.127.7.1.3.1.4
docsQosServiceFlowActiveParamSetIndexobsolete This object is obsolete.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.2.1.10.127.7.1.3.1.5
docsQosServiceFlowSID Service Identifier (SID) assigned to an admitted or active service flow. This object reports a value of 0 if a Service Id is not associated with the service flow. Only active or admitted upstream service flows will have…	Unsigned32 Constraints: range: 0-16383	.1.3.6.1.2.1.10.127.7.1.3.1.6
docsQosServiceFlowDirection The direction of the service flow.	IfDirection Type Values: 1 downstream 2 upstream	.1.3.6.1.2.1.10.127.7.1.3.1.7
docsQosServiceFlowPrimary Object reflects whether service flow is the primary or a secondary service flow. A primary service flow is the default service flow for otherwise unclassified traffic and all MAC messages.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.10.127.7.1.3.1.8
docsQosServiceFlowActiveTimeoutobsolete This object is obsolete.	secondsInteger32 Constraints: range: 0-65535	.1.3.6.1.2.1.10.127.7.1.3.1.9
docsQosServiceFlowAdmittedTimeoutobsolete This object is obsolete.	secondsInteger32 Constraints: range: 0-65535	.1.3.6.1.2.1.10.127.7.1.3.1.10
docsQosServiceFlowSchedulingTypeobsolete This object is obsolete.	SchedulingType Type Values: 1 undefined 2 bestEffort 3 nonRealTimePollingService 4 realTimePollingService 5 unsolictedGrantServiceWithAD 6 unsolictedGrantService	.1.3.6.1.2.1.10.127.7.1.3.1.11
docsQosServiceFlowRequestPolicyobsolete This object is obsolete.	OctetString Constraints: range: 4-4	.1.3.6.1.2.1.10.127.7.1.3.1.12
docsQosServiceFlowTosAndMaskobsolete This object is obsolete.	OctetString Constraints: range: 1-1	.1.3.6.1.2.1.10.127.7.1.3.1.13
docsQosServiceFlowTosOrMaskobsolete This object is obsolete.	OctetString Constraints: range: 1-1	.1.3.6.1.2.1.10.127.7.1.3.1.14

This table describes statistics associated with the
Service Flows in a managed device.

docsQosServiceFlowStatsEntry row .1.3.6.1.2.1.10.127.7.1.4.1

Describes a set of service flow statistics.
An entry in the table exists for each
Service Flow ID. The ifIndex is an
ifType of docsCableMaclayer(127).

Indexes

IF-MIBifIndex docsQosServiceFlowId

Column	Syntax	OID
docsQosServiceFlowPkts The number of Packet Data PDUs classified to this service flow. This object does not count MAC-specific management messages. CMs not classifying downstream packets may report this object's value as 0.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.4.1.1
docsQosServiceFlowOctets The number of octets transmitted on the Docsis RF network from the byte after the MAC header HCS to the end of the CRC for all packets counted in the docsQosServiceFlowPkts object for this row. Note that this counts the…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.4.1.2
docsQosServiceFlowTimeCreated The value of sysUpTime when the service flow was created.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.2.1.10.127.7.1.4.1.3
docsQosServiceFlowTimeActive The total time that service flow has been active.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.4.1.4
docsQosServiceFlowPHSUnknowns The number of packets received on the service flow with an unknown payload header suppression index.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.4.1.5
docsQosServiceFlowPolicedDropPkts The number of packets dropped due to policing of the service flow, especially to limit the maximum rate of the flow.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.4.1.6
docsQosServiceFlowPolicedDelayPkts The number of packet delayed due to policing of the service flow, especially to limit the maximum rate of the flow.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.4.1.7

This table describes statistics associated with
upstream service flows. All counted frames must
be received without an FCS error.

docsQosUpstreamStatsEntry row .1.3.6.1.2.1.10.127.7.1.5.1

Describes a set of upstream service flow statistics.
An entry in the table exists for each
upstream Service Flow in a managed device.
The ifIndex is an ifType of docsCableMaclayer(127).

Indexes

IF-MIBifIndex docsQosSID

Column	Syntax	OID
docsQosSID Identifies a service id for an admitted or active upstream service flow.	Integer32 Constraints: range: 1-16383	.1.3.6.1.2.1.10.127.7.1.5.1.1
docsQosUpstreamFragments The number of fragmentation headers received on an upstream service flow, regardless of whether the fragment was correctly reassembled into a valid packet.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.5.1.2
docsQosUpstreamFragDiscards The number of upstream fragments discarded and not assembled into a valid upstream packet.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.5.1.3
docsQosUpstreamConcatBursts The number of concatenation headers received on an upstream service flow.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.5.1.4

This table describes statistics associated with the
Dynamic Service Flows in a managed device.

docsQosDynamicServiceStatsEntry row .1.3.6.1.2.1.10.127.7.1.6.1

Describes a set of dynamic service flow statistics.
Two entries exist for each Docsis mac layer
interface for the upstream and downstream direction.
On the CMTS, the downstream direction row indicates
messages transmitt…

Indexes

IF-MIBifIndex docsQosIfDirection

Column	Syntax	OID
docsQosIfDirection The direction of interface.	IfDirection Type Values: 1 downstream 2 upstream	.1.3.6.1.2.1.10.127.7.1.6.1.1
docsQosDSAReqs The number of Dynamic Service Addition Requests, including retries.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.6.1.2
docsQosDSARsps The number of Dynamic Service Addition Responses, including retries.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.6.1.3
docsQosDSAAcks The number of Dynamic Service Addition Acknowledgements, including retries.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.6.1.4
docsQosDSCReqs The number of Dynamic Service Change Requests, including retries.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.6.1.5
docsQosDSCRsps The number of Dynamic Service Change Responses, including retries.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.6.1.6
docsQosDSCAcks The number of Dynamic Service Change Acknowledgements, including retries.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.6.1.7
docsQosDSDReqs The number of Dynamic Service Delete Requests, including retries.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.6.1.8
docsQosDSDRsps The number of Dynamic Service Delete Responses, including retries.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.6.1.9
docsQosDynamicAdds The number of successful Dynamic Service Addition transactions.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.6.1.10
docsQosDynamicAddFails The number of failed Dynamic Service Addition transactions.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.6.1.11
docsQosDynamicChanges The number of successful Dynamic Service Change transactions.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.6.1.12
docsQosDynamicChangeFails The number of failed Dynamic Service Change transactions.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.6.1.13
docsQosDynamicDeletes The number of successful Dynamic Service Delete transactions.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.6.1.14
docsQosDynamicDeleteFails The number of failed Dynamic Service Delete transactions.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.6.1.15
docsQosDCCReqs The number of Dynamic Channel Change Request messages traversing an interface. This count is nonzero only on downstream direction rows. This count should include number of retries.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.6.1.16
docsQosDCCRsps The number of Dynamic Channel Change Response messages traversing an interface. This count is nonzero only on upstream direction rows. This count should include number of retries.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.6.1.17
docsQosDCCAcks The number of Dynamic Channel Change Acknowledgement messages traversing an interface. This count is nonzero only on downstream direction rows. This count should include number of retries.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.6.1.18
docsQosDCCs The number of successful Dynamic Channel Change transactions. This count is nonzero only on downstream direction rows.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.6.1.19
docsQosDCCFails The number of failed Dynamic Channel Change transactions. This count is nonzero only on downstream direction rows.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.6.1.20
docsQosDCCRspDeparts The number of Dynamic Channel Change Response (depart) messages traversing an interface. This count is only counted on upstream direction rows.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.6.1.21
docsQosDCCRspArrives The number of Dynamic Channel Change Response (arrive) messages traversing an interface. This count is only counted on upstream direction rows. This count should include number of retries.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.6.1.22

This table contains a log of the disconnected
Service Flows in a managed device.

docsQosServiceFlowLogEntry row .1.3.6.1.2.1.10.127.7.1.7.1

The information regarding a single disconnected
service flow.

Indexes

docsQosServiceFlowLogIndex

Column	Syntax	OID
docsQosServiceFlowLogIndex Unique index for a logged service flow.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.7.1.1
docsQosServiceFlowLogIfIndex The ifIndex of ifType docsCableMaclayer(127) on the CMTS where the service flow was present.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.2.1.10.127.7.1.7.1.2
docsQosServiceFlowLogSFID The index assigned to the service flow by the CMTS.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.2.1.10.127.7.1.7.1.3
docsQosServiceFlowLogCmMac The MAC address for the cable modem associated with the service flow.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.2.1.10.127.7.1.7.1.4
docsQosServiceFlowLogPkts The number of packets counted on this service flow after payload header suppression.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.7.1.5
docsQosServiceFlowLogOctets The number of octets counted on this service flow after payload header suppression.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.7.1.6
docsQosServiceFlowLogTimeDeleted The value of sysUpTime when the service flow was deleted.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.2.1.10.127.7.1.7.1.7
docsQosServiceFlowLogTimeCreated The value of sysUpTime when the service flow was created.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.2.1.10.127.7.1.7.1.8
docsQosServiceFlowLogTimeActive The total time that service flow was active.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.7.1.9
docsQosServiceFlowLogDirection The value of docsQosServiceFlowDirection for the service flow.	IfDirection Type Values: 1 downstream 2 upstream	.1.3.6.1.2.1.10.127.7.1.7.1.11
docsQosServiceFlowLogPrimary The value of docsQosServiceFlowPrimary for the service flow.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.10.127.7.1.7.1.12
docsQosServiceFlowLogServiceClassName The value of docsQosParamSetServiceClassName for the provisioned QOS Parameter Set of the service flow.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.2.1.10.127.7.1.7.1.13
docsQosServiceFlowLogPolicedDropPkts The final value of docsQosServiceFlowPolicedDropPkts for the service flow.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.7.1.14
docsQosServiceFlowLogPolicedDelayPkts The final value of docsQosServiceFlowPolicedDelayPkts for the service flow.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.7.1.15
docsQosServiceFlowLogControl Setting this object to the value destroy(6) removes this entry from the table. Reading this object return the value active(1).	Enumerationr/w Enumerated Values: 1 active 6 destroy	.1.3.6.1.2.1.10.127.7.1.7.1.16

This table describes the set of Docsis-QOS
Service Classes in a CMTS.

docsQosServiceClassEntry row .1.3.6.1.2.1.10.127.7.1.8.1

A provisioned service class on a CMTS.
Each entry defines a template for certain
DOCSIS QOS Parameter Set values. When a CM
creates or modifies an Admitted QOS Parameter Set for a
Service Flow, it may reference a Servic…

Indexes

docsQosServiceClassName

Column	Syntax	OID
docsQosServiceClassName Service Class Name. DOCSIS specifies that the maximum size is 15 printable ASCII characters with a terminating zero. The terminating zero is not represented in this DisplayString syntax object.	OctetString Constraints: range: 1-15	.1.3.6.1.2.1.10.127.7.1.8.1.1
docsQosServiceClassParamSetIndexobsolete This object is obsolete.	Unsigned32r/w Constraints: range: 1-4294967295	.1.3.6.1.2.1.10.127.7.1.8.1.2
docsQosServiceClassStatus Used to create or delete rows in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.127.7.1.8.1.3
docsQosServiceClassPriority Template for docsQosParamSetPriority.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.2.1.10.127.7.1.8.1.4
docsQosServiceClassMaxTrafficRate Template for docsQosParamSetMaxTrafficRate.	BitRater/w	.1.3.6.1.2.1.10.127.7.1.8.1.5
docsQosServiceClassMaxTrafficBurst Template for docsQosParamSetMaxTrafficBurst.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.8.1.6
docsQosServiceClassMinReservedRate Template for docsQosParamSEtMinReservedRate.	BitRater/w	.1.3.6.1.2.1.10.127.7.1.8.1.7
docsQosServiceClassMinReservedPkt Template for docsQosParamSetMinReservedPkt.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.2.1.10.127.7.1.8.1.8
docsQosServiceClassMaxConcatBurst Template for docsQosParamSetMaxConcatBurst.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.2.1.10.127.7.1.8.1.9
docsQosServiceClassNomPollInterval Template for docsQosParamSetNomPollInterval.	microsecondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.8.1.10
docsQosServiceClassTolPollJitter Template for docsQosParamSetTolPollJitter.	microsecondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.8.1.11
docsQosServiceClassUnsolicitGrantSize Template for docsQosParamSetUnsolicitGrantSize.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.2.1.10.127.7.1.8.1.12
docsQosServiceClassNomGrantInterval Template for docsQosParamSetNomGrantInterval.	microsecondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.8.1.13
docsQosServiceClassTolGrantJitter Template for docsQosParamSetTolGrantJitter.	microsecondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.8.1.14
docsQosServiceClassGrantsPerInterval Template for docsQosParamSetGrantsPerInterval.	Integer32r/w Constraints: range: 0-127	.1.3.6.1.2.1.10.127.7.1.8.1.15
docsQosServiceClassMaxLatency Template for docsQosParamSetClassMaxLatency.	microsecondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.7.1.8.1.16
docsQosServiceClassActiveTimeout Template for docsQosParamSetActiveTimeout.	secondsInteger32r/w Constraints: range: 0-65535	.1.3.6.1.2.1.10.127.7.1.8.1.17
docsQosServiceClassAdmittedTimeout Template for docsQosParamSetAdmittedTimeout.	secondsInteger32r/w Constraints: range: 0-65535	.1.3.6.1.2.1.10.127.7.1.8.1.18
docsQosServiceClassSchedulingType Template for docsQosParamSetSchedulingType.	SchedulingTyper/w Type Values: 1 undefined 2 bestEffort 3 nonRealTimePollingService 4 realTimePollingService 5 unsolictedGrantServiceWithAD 6 unsolictedGrantService	.1.3.6.1.2.1.10.127.7.1.8.1.19
docsQosServiceClassRequestPolicy Template for docsQosParamSetRequestPolicyOct.	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.2.1.10.127.7.1.8.1.20
docsQosServiceClassTosAndMask Template for docsQosParamSetTosAndMask.	OctetStringr/w Constraints: range: 1-1	.1.3.6.1.2.1.10.127.7.1.8.1.21
docsQosServiceClassTosOrMask Template for docsQosParamSetTosOrMask.	OctetStringr/w Constraints: range: 1-1	.1.3.6.1.2.1.10.127.7.1.8.1.22
docsQosServiceClassDirection Specifies whether the service class template applies to upstream or downstream service flows.	IfDirectionr/w Type Values: 1 downstream 2 upstream	.1.3.6.1.2.1.10.127.7.1.8.1.23

This table describes the set of Docsis-QOS
Service Class Policies.
          
This table is an adjunct to the
docsDevFilterPolicy table.  Entries in
docsDevFilterPolicy table can  point to
specific rows in this table.
          
This table permits mapping a packet to a service
class name of an active service flow so long as
a classifier does not exist at a higher
priority.

docsQosServiceClassPolicyEntry row .1.3.6.1.2.1.10.127.7.1.9.1

A service class name policy entry.

Indexes

docsQosServiceClassPolicyIndex

Column	Syntax	OID
docsQosServiceClassPolicyIndex Index value to uniquely identify an entry in this table.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.2.1.10.127.7.1.9.1.1
docsQosServiceClassPolicyName Service Class Name to identify the name of the service class flow to which the packet should be directed.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.2.1.10.127.7.1.9.1.2
docsQosServiceClassPolicyRulePriority Service Class Policy rule priority for the entry.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.2.1.10.127.7.1.9.1.3
docsQosServiceClassPolicyStatus Used to create or delete rows in this table. This object should not be deleted if it is reference by an entry in docsDevFilterPolicy. The reference should be deleted first.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.127.7.1.9.1.4

This table describes set of payload header
suppression entries.

docsQosPHSEntry row .1.3.6.1.2.1.10.127.7.1.10.1

A payload header suppression entry.
The ifIndex is an ifType of docsCableMaclayer(127).
The index docsQosServiceFlowId selects one
service flow from the cable MAC layer interface.
The docsQosPktClassId index matches an
…

Indexes

IF-MIBifIndex docsQosServiceFlowId docsQosPktClassId

Column	Syntax	OID
docsQosPHSField Payload header suppression field defines the bytes of the header which must be suppressed/restored by the sending/receiving device. The number of octets in this object should be the same as the value of d…	OctetString Constraints: range: 0-255	.1.3.6.1.2.1.10.127.7.1.10.1.2
docsQosPHSMask Payload header suppression mask defines the bit mask which used in combination with the docsQosPHSField defines which bytes in header must be suppressed/restored by the sending or receiving device. Each b…	OctetString Constraints: range: 0-32	.1.3.6.1.2.1.10.127.7.1.10.1.3
docsQosPHSSize Payload header suppression size specifies the number of bytes in the header to be suppressed and restored. The value of this object must match the number of bytes in the docsQosPHSField.	Integer32 Constraints: range: 0-255	.1.3.6.1.2.1.10.127.7.1.10.1.4
docsQosPHSVerify Payload header suppression verification value of 'true' the sender must verify docsQosPHSField is the same as what is contained in the packet to be suppressed.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.10.127.7.1.10.1.5
docsQosPHSClassifierIndexobsolete This object is obsolete.	Integer32 Constraints: range: 1-65535	.1.3.6.1.2.1.10.127.7.1.10.1.6
docsQosPHSIndex Payload header suppression index uniquely references the PHS rule for a given service flow.	Integer32 Constraints: range: 1-255	.1.3.6.1.2.1.10.127.7.1.10.1.7

This table provide for referencing the service flows
associated with a particular cable modem. This allows
for indexing into other docsQos tables that are
indexed by docsQosServiceFlowId and ifIndex.

docsQosCmtsMacToSrvFlowEntry row .1.3.6.1.2.1.10.127.7.1.11.1

An entry is created by CMTS for each service flow
connected to this CMTS.

Indexes

docsQosCmtsCmMac docsQosCmtsServiceFlowId

Column	Syntax	OID
docsQosCmtsCmMac The MAC address for the referenced CM.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.2.1.10.127.7.1.11.1.1
docsQosCmtsServiceFlowId An index assigned to a service flow by CMTS.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.2.1.10.127.7.1.11.1.2
docsQosCmtsIfIndex The ifIndex of ifType docsCableMacLayter(127) on the CMTS that is connected to the Cable Modem.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.2.1.10.127.7.1.11.1.3