DNOS-VPC-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

agentVpcConfigTable

table obsolete

.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.7 · 1 row entry · 2 columns

Open in standard view

Uses the dell variant from /opt/observium/mibs/dell.

Command help

Walk agentVpcConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DNOS-VPC-MIB' -M '/opt/observium/mibs/dell:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DNOS-VPC-MIB::agentVpcConfigTable'

VPC config table.

agentVpcConfigEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.7.1

VPC config entry.

Indexes

agentVpcConfigId

Column	Syntax	OID
agentVpcConfigIdobsolete VPC Id. This object is obselete. Refer to agentVpcDomainIndex for configuring VPC Id.	Unsigned32 Constraints: `range: 1-63`	`.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.7.1.1`
agentVpcTrackPortMaskobsolete Tracking of non-mlag links.	DELL-REF-MIBAgentPortMaskr/w Type Constraints: `range: 1..255`	`.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.7.1.2`

agentPeerConfigTable

table obsolete

.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.8 · 1 row entry · 5 columns

Open in standard view

Uses the dell variant from /opt/observium/mibs/dell.

Command help

Walk agentPeerConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DNOS-VPC-MIB' -M '/opt/observium/mibs/dell:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DNOS-VPC-MIB::agentPeerConfigTable'

VPC config table.

agentPeerConfigEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.8.1

VPC config entry.

Indexes

agentPeerConfigRowIndex

Column Syntax OID

agentPeerConfigRowIndexobsolete

Index.

Unsigned32

Constraints:
range: 1-1

.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.8.1.1

agentPeerIpAddrobsolete

To configure IP address of the peer VPC switch. This
configuration is used by the dual control plane detection
protocol (DCPDP) on the VPC switches.

NOTE: In order to set value for the object, need to set…

SNMPv2-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.8.1.2

agentSourceIpAddrobsolete

To configure Self IP address of the VPC switch that is used as
the source IP by the dual control plane detection protocol (DCPDP)
on the VPC switches.

NOTE: In order to set value for the object, need to s…

SNMPv2-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.8.1.3

agentDcpdpUdpPortobsolete

To configure the UDP port on which the VPC switch listens to
the DCPDP messages.
Configurable range is 1 to 65535. Default value is 50000.

NOTE: In order to set value for the object, need to set values fo…

Unsigned32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.8.1.4

agentPeerRowStatusobsolete

Peer config status.

Supported values:
active(1) - valid instance.
createAndGo(4) - used to configure peer configuration.
destroy(6) - reset peer configuration.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.8.1.5

agentVpcDomainConfigTable

table

.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9 · 1 row entry · 13 columns

Open in standard view

Uses the dell variant from /opt/observium/mibs/dell.

Command help

Walk agentVpcDomainConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DNOS-VPC-MIB' -M '/opt/observium/mibs/dell:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DNOS-VPC-MIB::agentVpcDomainConfigTable'

VPC domain config table.

agentVpcDomainConfigEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9.1

VPC domain config entry.

Indexes

agentVpcDomainIndex

Column Syntax OID

agentVpcDomainIndex

VPC Domain ID.

Unsigned32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9.1.1

agentVpcDomainKeepalivePriority

To configure the priority of the VPC switch. This value is used
for the VPC role election.
Configurable range is 1 to 255. The default value is 100.
Note: The VPC switch with lower priority becomes the Primary. If
…

Unsigned32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9.1.2

agentVpcDomainKeepaliveTimeout

To configure the peer keepalive timeout value (in seconds). If
an VPC switch does not receive keepalive messages from the peer
for this timeout value, it takes the decision to transition its
role (if required).
Configur…

Unsigned32r/w

Constraints:
range: 2-15

.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9.1.3

agentVpcDomainKeepaliveMode

To start/stop the keepalive state machine on the VPC device, if
VPC is globally enabled.
The following options are supported:

enable - Enable keepalive
disable - Disable keepalive

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9.1.4

agentVpcDomainPeerDetectionMode

To start/stop the dual control plane detection protocol (DCPDP) on the
VPC switch.
The following options are supported:

enable - Enable the DCPDP on VPC switch
disable - Disable the DCPDP on VPC switch
…

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9.1.5

agentVpcDomainSystemMac

To configure the MAC address for the VPC domain. This mac-address
is used in the LACP PDUs and STP BPDUs
that are sent out on VPC member ports. For the VPC domain to use
the manually configured VPC MAC address, it sh…

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…

.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9.1.6

agentVpcDomainSystemPriority

To configure the system priority for the VPC domain. This is used
in the LACP PDUs sent out on VPC member ports. System-priority
should be configured same on both the VPC peers. If the configured
VPC system priority …

Unsigned32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9.1.7

agentVpcDomainPeerDetectionInterval

To configure the DCPDP transmission interval.
NOTE: In order to set value for the object, need to set values for DCPDP
transmission interval and reception timeout simultaneously.

Unsigned32r/w

Constraints:
range: 200-4000

.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9.1.8

agentVpcDomainPeerDetectionTimeout

To configure the DCPDP reception timeout.
NOTE: In order to set value for the object, need to set values for DCPDP
transmission interval and reception timeout simultaneously.

Unsigned32r/w

Constraints:
range: 700-14000

.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9.1.9

agentVpcDomainPeerIpAddr

SNMPv2-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9.1.10

agentVpcDomainSourceIpAddr

SNMPv2-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9.1.11

agentVpcDomainDcpdpUdpPort

Unsigned32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9.1.12

agentVpcDomainStatus

Status of VPC Domain.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9.1.13

agentVpcSelfMemberStatusTable

table

.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.14 · 1 row entry · 3 columns

Open in standard view

Uses the dell variant from /opt/observium/mibs/dell.

Command help

Walk agentVpcSelfMemberStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DNOS-VPC-MIB' -M '/opt/observium/mibs/dell:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DNOS-VPC-MIB::agentVpcSelfMemberStatusTable'

VPC self member ports status table.

agentVpcSelfMemberStatusEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.14.1

VPC self member port status entry.

Indexes

agentVpcSelfMemberStatusVpcId agentVpcSelfMemberStatusIntfId

Column Syntax OID

agentVpcSelfMemberStatusVpcId

VPC Id.

Unsigned32

Constraints:
range: 1-63

.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.14.1.1

agentVpcSelfMemberStatusIntfId

Interface Id.

IF-MIBInterfaceIndex

Type Constraints:
range: 1..2147483647

Description:

A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …

.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.14.1.2

agentVpcSelfMemberStatusIntfState

VPC self member interface status.

Enumeration

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.14.1.3

agentVpcPeerMemberStatusTable

table

.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.15 · 1 row entry · 3 columns

Open in standard view

Uses the dell variant from /opt/observium/mibs/dell.

Command help

Walk agentVpcPeerMemberStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DNOS-VPC-MIB' -M '/opt/observium/mibs/dell:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DNOS-VPC-MIB::agentVpcPeerMemberStatusTable'

VPC peer member ports status table.

agentVpcPeerMemberStatusEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.15.1

VPC peer member port status entry.

Indexes

agentVpcPeerMemberStatusVpcId agentVpcPeerMemberStatusIntfId

Column Syntax OID

agentVpcPeerMemberStatusVpcId

VPC Id.

Unsigned32

Constraints:
range: 1-63

.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.15.1.1

agentVpcPeerMemberStatusIntfId

Interface Id.

IF-MIBInterfaceIndex

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.15.1.2

agentVpcPeerMemberStatusIntfState

VPC peer member interface status.

Enumeration

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.15.1.3

agentVpcStatusTable

table

.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.16 · 1 row entry · 4 columns

Open in standard view

Uses the dell variant from /opt/observium/mibs/dell.

Command help

Walk agentVpcStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DNOS-VPC-MIB' -M '/opt/observium/mibs/dell:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DNOS-VPC-MIB::agentVpcStatusTable'

VPC status table.

agentVpcStatusEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.16.1

VPC status entry.

Indexes

agentVpcStatusId

Column Syntax OID

agentVpcStatusId

VPC Id.

Unsigned32

Constraints:
range: 1-63

.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.16.1.1

agentVpcOperationalStatus

VPC operational status.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.16.1.2

agentPortChannelId

Port-channel ID.

IF-MIBInterfaceIndex

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.16.1.3

agentVpcInterfaceState

The following states of a VPC port-channel interface mean:
DISABLE: The state of a port-channel before VPC functionality is enabled on it.
WAIT: The VPC port-channel 'waits' for the VPC functionality
to …

Enumeration

Enumerated Values:

1	disable
2	wait
3	error
4	active
5	inactive

.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.16.1.4