DMON-COMMON-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
33

dmonParkModeControlTable

table
.1.3.6.1.4.1.5802.999999.2.5 · 1 row entry · 8 columns
Open in standard view
Uses the electroline variant from /opt/observium/mibs/electroline.
Command help
Walk dmonParkModeControlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DMON-COMMON-MIB' -M '/opt/observium/mibs/electroline:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DMON-COMMON-MIB::dmonParkModeControlTable' 
A set of data to control Parking mode.
dmonParkModeControlEntry row .1.3.6.1.4.1.5802.999999.2.5.1
...
Indexes
Column Syntax OID
dmonParkModeReceiverID
The Receiver ID which can do parking mode.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.5802.999999.2.5.1.1
dmonParkModeReceiverStatus
Satus of the Receiver entry.
Enumeration
Enumerated Values:
0isScanning
1isParked-Infinite
2isParked-Timed
3isUsedByDOCSIS
4other
 .1.3.6.1.4.1.5802.999999.2.5.1.2
dmonParkModeReceiverParkingFrequency
The center of the downstream frequency associated with
this channel what Receiver trise to park in.
hertzInteger32r/w
Constraints:
range: 0-1000000000
 .1.3.6.1.4.1.5802.999999.2.5.1.3
dmonParkModeReceiverSymbolRate
The symbol rate of the parking channel.
Integer32r/w
Constraints:
range: 0-100000000
 .1.3.6.1.4.1.5802.999999.2.5.1.4
dmonParkModeReceiverQamType
The modulation type associated with this channel.
Setting it to unknown will disable scanning this channel
DMON-MIBModulationTyper/w
Type Values:
-1unknown
0qam16
1qam64
2qam256
3qam1024
4qam32
5qam128
6qpsk
 .1.3.6.1.4.1.5802.999999.2.5.1.5
dmonParkModeReceiverInverseMode
The inverse mode accociated with this channel.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.5802.999999.2.5.1.6
dmonParkModeDwellTime
Set the amount of time in seconds to have a receiver dwell on a given channel in Parking Mode.
Once expire, the receiver must return to default scanning mode.
When set to 0, it means indefinitely.
secondInteger32r/w
Constraints:
range: 0-1000000000
 .1.3.6.1.4.1.5802.999999.2.5.1.7
dmonParkModeReceiverControl
Whether the receiver is at parking mode. Writing the value NotAvailable(2) will be ignored,
this value is only for informational purpose.
Enumerationr/w
Enumerated Values:
0scanningMode
1parkingMode
2notAvailable
 .1.3.6.1.4.1.5802.999999.2.5.1.8

dmonUserFreqTable

table
.1.3.6.1.4.1.5802.999999.2.11 · 1 row entry · 6 columns
Open in standard view
Uses the electroline variant from /opt/observium/mibs/electroline.
Command help
Walk dmonUserFreqTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DMON-COMMON-MIB' -M '/opt/observium/mibs/electroline:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DMON-COMMON-MIB::dmonUserFreqTable' 
This table defines the set of channel frequencies to scan 
when DMON is in user defined table mode. The lowest index entries are 
searched first, skipping over all entries that have a '0' frequency 
value in this table.
dmonUserFreqEntry row .1.3.6.1.4.1.5802.999999.2.11.1
Each entry defines a channel frequency to scan during monitoring.
Indexes
Column Syntax OID
dmonUserFreqProvIndex
The index of the Provisioned Gold List entry
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.5802.999999.2.11.1.1
dmonUserFreqProvStatus
Controls and reflects the status of rows in this
table. Rows in this table may be created by either the
create-and-go or create-and-wait paradigms. There is no
restriction on changing values in a row of this table whil…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.5802.999999.2.11.1.2
dmonUserFreqProvFrequency
The Frequency used for monitoring.
Unsigned32r/w
Constraints:
range: 57000000-999000000
 .1.3.6.1.4.1.5802.999999.2.11.1.3
dmonUserFreqProvModulation
The modulation type associated with this channel.
Setting it to unknown will disable scanning this channel
DMON-MIBModulationTyper/w
Type Values:
-1unknown
0qam16
1qam64
2qam256
3qam1024
4qam32
5qam128
6qpsk
 .1.3.6.1.4.1.5802.999999.2.11.1.4
dmonUserFreqProvSymbolRate
Symbolrate to use for scanning. If not set, the default symbolrate will be used.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5802.999999.2.11.1.5
dmonUserFreqProvInversion
The Inverse mode of this channel,Defaultly disabled
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.5802.999999.2.11.1.6

cfgChannelExclusionTable

table
.1.3.6.1.4.1.5802.999999.2.18.2 · 1 row entry · 4 columns
Open in standard view
Uses the electroline variant from /opt/observium/mibs/electroline.
Command help
Walk cfgChannelExclusionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DMON-COMMON-MIB' -M '/opt/observium/mibs/electroline:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DMON-COMMON-MIB::cfgChannelExclusionTable' 
This is the list of single channels or ranges of channel that must be ignored in the channel map.
cfgChannelExclusionEntry row .1.3.6.1.4.1.5802.999999.2.18.2.1
Channel exclusion entry definition
Indexes
Column Syntax OID
cfgChannelExclusionIndex
Index into the ChannelExclusion table
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.5802.999999.2.18.2.1.1
cfgChannelExclusionStatus
The status of this conceptual row.

To create a row in this table, a manager must set this object to
either createAndGo(4) or createAndWait(5).

Until instances of all corresponding columns …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.5802.999999.2.18.2.1.2
cfgChannelExclusionStartFrequency
This represents the beginning of the exclusion. If the row represents
a single channel, this value will be the same of cfgChannelExclusionStopFrequency.
hertzInteger32r/w
Constraints:
range: 0-1000000000
 .1.3.6.1.4.1.5802.999999.2.18.2.1.3
cfgChannelExclusionStopFrequency
This represents the end of the exclusion. If the row represents
a single channel, this value will be the same of cfgChannelExclusionStartFrequency
hertzInteger32r/w
Constraints:
range: 0-1000000000
 .1.3.6.1.4.1.5802.999999.2.18.2.1.4

cfgChannelInclusionTable

table
.1.3.6.1.4.1.5802.999999.2.18.3 · 1 row entry · 7 columns
Open in standard view
Uses the electroline variant from /opt/observium/mibs/electroline.
Command help
Walk cfgChannelInclusionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DMON-COMMON-MIB' -M '/opt/observium/mibs/electroline:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DMON-COMMON-MIB::cfgChannelInclusionTable' 
This is the list of single channels or ranges of channels that must be added in the channel map.
cfgChannelInclusionEntry row .1.3.6.1.4.1.5802.999999.2.18.3.1
Channel inclusion entry definition
Indexes
Column Syntax OID
cfgChannelInclusionIndex
Index into the ChannelInclusion table
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.5802.999999.2.18.3.1.1
cfgChannelInclusionStatus
The status of this conceptual row.

To create a row in this table, a manager must set this object to
either createAndGo(4) or createAndWait(5).

Until instances of all corresponding columns …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.5802.999999.2.18.3.1.2
cfgChannelInclusionType
Indicates the channel type. This may change the monitoring behavior.
Enumerationr/w
Enumerated Values:
0linear-qam
1docsis
2sdv
3vod
4analog
5oob
 .1.3.6.1.4.1.5802.999999.2.18.3.1.3
cfgChannelInclusionModulation
indicate the modulation used on this channel
Enumerationr/w
Enumerated Values:
0analog
1qam64
2qam128
3qam256
4qam512
5qam1024
 .1.3.6.1.4.1.5802.999999.2.18.3.1.4
cfgChannelInclusionBandwidth
Indicates the channel bandwidth
Enumerationr/w
Enumerated Values:
0six-mhz
1eight-mhz
 .1.3.6.1.4.1.5802.999999.2.18.3.1.5
cfgChannelInclusionStartFrequency
This represents the beginning of the Inclusion. If the row represents
a single channel, this value will be the same of cfgChannelInclusionStopFrequency.
hertzInteger32r/w
Constraints:
range: 0-1000000000
 .1.3.6.1.4.1.5802.999999.2.18.3.1.6
cfgChannelInclusionStopFrequency
This represents the end of the inclusion. If the row represents
a single channel, this value will be the same of cfgChannelInclusionStartFrequency
hertzInteger32r/w
Constraints:
range: 0-1000000000
 .1.3.6.1.4.1.5802.999999.2.18.3.1.7

cfgInputPowerBaselineResultTable

table
.1.3.6.1.4.1.5802.999999.2.19.2 · 1 row entry · 5 columns
Open in standard view
Uses the electroline variant from /opt/observium/mibs/electroline.
Command help
Walk cfgInputPowerBaselineResultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DMON-COMMON-MIB' -M '/opt/observium/mibs/electroline:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DMON-COMMON-MIB::cfgInputPowerBaselineResultTable' 
This table show the input power baseline of the last provisionning scan.
The entries in this table are stored in non-volatile memory.
cfgInputPowerBaselineResultEntry row .1.3.6.1.4.1.5802.999999.2.19.2.1
cfgInputPowerBaselineResultTable entry definition
Indexes
Column Syntax OID
cfgInputPowerBaseLineChannelIndex
Index into the cfgInputPowerBaselineResult table
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.5802.999999.2.19.2.1.1
cfgInputPowerBaseLineChannelFrequency
The center of the downstream frequency associated with
this channel.
hertzInteger32
Constraints:
range: 0-1000000000
 .1.3.6.1.4.1.5802.999999.2.19.2.1.2
cfgInputPowerBaseLineChannelPower
The received power level of the channel.
dBmVDOCS-IF-MIBTenthdBmV .1.3.6.1.4.1.5802.999999.2.19.2.1.3
cfgInputPowerBaseLineChannelMER
The channel MER.
TenthdBDOCS-IF-MIBTenthdB .1.3.6.1.4.1.5802.999999.2.19.2.1.4
cfgInputPowerBaseLineChannelStatus
This object specifies if the baseline has been successfully retrived for this
particular channel during the last scan. The main reason for failure is if the QAM locked
has not been achieved.
Enumeration
Enumerated Values:
0unknown
1success
2error
 .1.3.6.1.4.1.5802.999999.2.19.2.1.5

cfgMERRulesTable

table
.1.3.6.1.4.1.5802.999999.2.19.5 · 1 row entry · 3 columns
Open in standard view
Uses the electroline variant from /opt/observium/mibs/electroline.
Command help
Walk cfgMERRulesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DMON-COMMON-MIB' -M '/opt/observium/mibs/electroline:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DMON-COMMON-MIB::cfgMERRulesTable' 
This table show the input power baseline of the last provisionning scan.
The entries in this table are stored in non-volatile memory.
cfgMERRulesEntry row .1.3.6.1.4.1.5802.999999.2.19.5.1
cfgMERRulesTable entry definition
Indexes
Column Syntax OID
cfgMERRulesTableIndex
Index into the cfgMERRulesTable table
Enumeration
Enumerated Values:
1qam64
2qam128
3qam256
4qam512
5qam1024
 .1.3.6.1.4.1.5802.999999.2.19.5.1.1
cfgMERRulesLO
This represente default LO threshold for the MER property.
The entry in this object is stored in non-volatile memory.
dBDOCS-IF-MIBTenthdBr/w .1.3.6.1.4.1.5802.999999.2.19.5.1.2
cfgMERRulesLOLO
This represente default LOLO threshold for the MER property.
The entry in this object is stored in non-volatile memory.
dBDOCS-IF-MIBTenthdBr/w .1.3.6.1.4.1.5802.999999.2.19.5.1.3