DGS-6600-VPLS-GENERIC-MIB
Copyright (C) The IETF Trust (2012). The initial
version of this MIB module was published in RFC XXXX.
-- RFC Editor: Please replace XXXX with RFC number & remove
-- this note.
For full legal notices see the RFC itself or see:
http://www.ietf.org/copyrights/ianamib.html
This MIB module contains generic managed object definitions
for Virtual Private LAN Services as define in [RFC4762] and
[RFC4761]
This MIB module enables the use of any underlying Pseudowire
network.
- Source file
DGS-6600-VPLS-GENERIC-MIB- Last revised
- Identity
dgs6600VplsGenericMIB- Base OID
1.3.6.1.4.1.171.10.120.100.4.1
Imported Objects
| DGS-6600-ID-MIB | dgs6600-mpls |
| PW-STD-MIB | pwIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) transmission Unsigned32 |
| SNMPv2-TC | RowStatus StorageType TruthValue |
| VPN-TC-STD-MIB | VPNIdOrZero |
Net-SNMP examples using the d-link MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'DGS-6600-VPLS-GENERIC-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'DGS-6600-VPLS-GENERIC-MIB::dgs6600VplsGenericMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS-6600-VPLS-GENERIC-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS-6600-VPLS-GENERIC-MIB::dgs6600VplsGenericMIB'
Objects (40)
Showing 40 of 40 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.171.10.120.100.4.1 |
||
.1.3.6.1.4.1.171.10.120.100.4.1.0 |
||
.1.3.6.1.4.1.171.10.120.100.4.1.1 |
||
.1.3.6.1.4.1.171.10.120.100.4.1.1.1 |
||
.1.3.6.1.4.1.171.10.120.100.4.1.1.2 |
||
.1.3.6.1.4.1.171.10.120.100.4.1.1.2.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.171.10.120.100.4.1.1.2.1.1 |
|
|
percentageUnsigned32
|
.1.3.6.1.4.1.171.10.120.100.4.1.1.2.1.10 |
|
|
percentageUnsigned32
|
.1.3.6.1.4.1.171.10.120.100.4.1.1.2.1.11 |
|
.1.3.6.1.4.1.171.10.120.100.4.1.1.2.1.12 |
||
|
|
Unsigned32
|
.1.3.6.1.4.1.171.10.120.100.4.1.1.2.1.13 |
.1.3.6.1.4.1.171.10.120.100.4.1.1.2.1.14 |
||
.1.3.6.1.4.1.171.10.120.100.4.1.1.2.1.15 |
||
|
|
.1.3.6.1.4.1.171.10.120.100.4.1.1.2.1.2 |
|
|
|
.1.3.6.1.4.1.171.10.120.100.4.1.1.2.1.3 |
|
|
Enumeration
|
.1.3.6.1.4.1.171.10.120.100.4.1.1.2.1.4 |
|
.1.3.6.1.4.1.171.10.120.100.4.1.1.2.1.6 |
||
.1.3.6.1.4.1.171.10.120.100.4.1.1.2.1.7 |
||
.1.3.6.1.4.1.171.10.120.100.4.1.1.2.1.8 |
||
.1.3.6.1.4.1.171.10.120.100.4.1.1.3 |
||
.1.3.6.1.4.1.171.10.120.100.4.1.1.3.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.171.10.120.100.4.1.1.3.1.1 |
|
.1.3.6.1.4.1.171.10.120.100.4.1.1.3.1.2 |
||
.1.3.6.1.4.1.171.10.120.100.4.1.1.4 |
||
.1.3.6.1.4.1.171.10.120.100.4.1.1.4.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.171.10.120.100.4.1.1.4.1.1 |
|
|
|
Enumeration
|
.1.3.6.1.4.1.171.10.120.100.4.1.1.4.1.2 |
.1.3.6.1.4.1.171.10.120.100.4.1.1.4.1.3 |
||
.1.3.6.1.4.1.171.10.120.100.4.1.1.4.1.4 |
||
.1.3.6.1.4.1.171.10.120.100.4.1.1.5 |
||
.1.3.6.1.4.1.171.10.120.100.4.1.1.5.1 |
||
.1.3.6.1.4.1.171.10.120.100.4.1.1.5.1.1 |
||
.1.3.6.1.4.1.171.10.120.100.4.1.1.5.1.2 |
||
.1.3.6.1.4.1.171.10.120.100.4.1.1.5.1.3 |
||
.1.3.6.1.4.1.171.10.120.100.4.1.1.5.1.4 |
||
.1.3.6.1.4.1.171.10.120.100.4.1.1.7 |
||
.1.3.6.1.4.1.171.10.120.100.4.1.1.8 |
||
.1.3.6.1.4.1.171.10.120.100.4.1.2 |
||
.1.3.6.1.4.1.171.10.120.100.4.1.2.1 |
||
.1.3.6.1.4.1.171.10.120.100.4.1.2.2 |
Dependencies (17) 7 direct · 10 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- RFC1155-SMIrfc
- DLINK-ID-REC-MIBd-link
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- DGS-6600-ID-MIBd-link
- HC-PerfHist-TC-MIBrfc
- IANA-PWE3-MIBrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- INET-ADDRESS-MIBrfc
- PerfHist-TC-MIBrfc
- PW-TC-STD-MIBrfc
- SNMP-FRAMEWORK-MIBrfc
- PW-STD-MIBrfc
- VPN-TC-STD-MIBrfc
- DGS-6600-VPLS-GENERIC-MIBd-linkselected
Type Definitions (3)
| OctetString |
range: 0..256 |
|
| OctetString |
range: 0..256 |
|
| Enumeration |
import(1)export(2)both(3) |
Conformance Groups (3)
|
vplsConfigName vplsConfigDescr vplsConfigAdminStatus vplsConfigMacLearning vplsConfigDiscardUnknownDest vplsConfigMacAging vplsConfigVpnId vplsConfigFwdFullHighWatermark vplsConfigFwdFullLowWatermark vplsConfigRowStatus vplsConfigIndexNext vplsConfigMtu vplsConfigStorageType vplsStatusOperStatus vplsStatusPeerCount vplsStatusNotifEnable vplsNotificationMaxRate
The group of objects supporting
management of L2VPN VPLS services |
.1.3.6.1.4.1.171.10.120.100.4.1.2.2.1
|
|
|
The group of objects supporting
management of Pseudo Wire (PW) Binding to VPLS. |
.1.3.6.1.4.1.171.10.120.100.4.1.2.2.2
|
|
|
The group of notifications supporting
the Notifications generated for VPLS Services |
.1.3.6.1.4.1.171.10.120.100.4.1.2.2.3
|
Compliance Statements (2)
OID
.1.3.6.1.4.1.171.10.120.100.4.1.2.1.1Compliance requirement for implementations that
provide full support for VPLS-GENERIC-MIB.
Such devices can then be monitored and configured using
this MIB module.
provide full support for VPLS-GENERIC-MIB.
Such devices can then be monitored and configured using
this MIB module.
Required groups
| mandatory | vplsGroup | |
| mandatory | vplsPwBindGroup | |
| mandatory | vplsNotificationGroup |
OID
.1.3.6.1.4.1.171.10.120.100.4.1.2.1.2Compliance requirement for implementations that only
provide read-only support for VPLS-GENERIC-MIB.
Such devices can then be monitored but cannot be
configured using this MIB modules.
provide read-only support for VPLS-GENERIC-MIB.
Such devices can then be monitored but cannot be
configured using this MIB modules.
Required groups
| mandatory | vplsGroup | |
| mandatory | vplsPwBindGroup | |
| mandatory | vplsNotificationGroup |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| vplsConfigName | readonly | Write access is not required. | |
| vplsConfigDescr | readonly | Write access is not required. | |
| vplsConfigAdminStatus | readonly | Write access is not required. | |
| vplsConfigMacLearning | readonly | Write access is not required. | |
| vplsConfigDiscardUnknownDest | readonly | Write access is not required. | |
| vplsConfigMacAging | readonly | Write access is not required. | |
| vplsConfigFwdFullHighWatermark | readonly | Write access is not required. | |
| vplsConfigFwdFullLowWatermark | readonly | Write access is not required. | |
| vplsConfigRowStatus | readonly | Write access is not required. | |
| vplsConfigMtu | readonly | Write access is not required. | |
| vplsPwBindConfigType | readonly | Write access is not required. | |
| vplsPwBindType | readonly | Write access is not required. | |
| vplsPwBindRowStatus | readonly | Write access is not required. |
Notifications / Traps (3)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.4.1.171.10.120.100.4.1.0.1 |
The vplsStatusChanged notification is generated
when there is a change in the administrative or operating status of a VPLS service. |
|
.1.3.6.1.4.1.171.10.120.100.4.1.0.2 |
The vplsFwdFullAlarmRaised notification is
generated when the utilization of the Forwarding database is above the value specified by vplsConfigFwdFullHighWatermark. |
|
.1.3.6.1.4.1.171.10.120.100.4.1.0.3 |
The vplsFwdFullAlarmCleared notification is
generated when the utilization of the Forwarding database is below the value specified by vplsConfigFwdFullLowWatermark. |